Jonard Tools CSR-1575 Cable Strip & Ring Tool

$32.95

For cables, buffer tubes and jackets on fiber optic cables up to 7.5mm (0.3″) in diameter.

Product Description

Jonard Tools CSR-1575 Cable Strip & Ring Tool

The CSR-1575 is designed to slit and ring cables, buffer tubes and jackets on fiber optic cables up to 7.5mm (0.3″) in diameter. The tool features an easily adjustable slit blade and ring blade as well as a removable and reversible V block that improves slitting performance and accommodates smaller to larger diameter cables.

Simple to use:

  • Ringing a cable: Ring blade is easily adjustable using the adjustment knob. Rotate the knob toward the ” ” sign to increase cutting blade depth and rotate the knob toward the “-” sign to decrease cutting depth. Once depth is determined, open jaw, insert cable, rotate tool around cable 3 times, open jaw and remove cable, pull off jacket.
  • Slitting a cable: First select which V groove is needed on the V block, we recommend using the small V groove for cables 3mm or smaller and use the large V groove for cable larger than 3mm. To remove V block simply push on the V block, remove from tool.
  • Select groove then push V block back into tool. Set the depth of the slitting blade by loosening the screw holding the blade in place, use the tab on the blade to move the blade up or down to the desired slitting depth, tighten screw. Open jaw, insert cable to be slit, close jaw and pull.
image_print

Additional Information

Weight 0.2 lbs
Dimensions 2 × 2 × 2 in

image_print

Q – What is the Prop 65 warning, and should I be worried before I purchase?

A – Our “WARNING” notices are mandated by California Proposition 65. We believe that our products are completely safe for consumer use and if any Prop 65 listed chemicals were to be present, we believe they would be within the safe harbor levels for exposure as published by Prop 65.

Our lighting products use Polycarbonate (PC) lenses for light projection, and Bisphenol A (BPA) is a precursor chemical used to make PC lenses. Prop 65 identifies BPA as a cause of reproductive toxicity.

Our lighting products use Acrylonitrile Butadiene Styrene (ABS) plastic for battery carriers and other enclosures, and Styrene is a precursor chemical used to make ABS plastic. Prop 65 identifies Styrene as a chemical that can cause cancer.

Please note that PC and ABS plastics are not listed polymers under Prop 65, but the identified precursor chemicals are listed and in some cases these finished plastics may contain low levels of the chemical in the plastic. Therefore, out of an abundance of caution we decide to adopt this marking in 2017 to alleviate any legal issues that could arise from an improperly marked product sold in California. These warnings are not required by FDA or other Federal agencies.