Eclipse 902-335 4″ X 8″ SOLDERING SPONGES – 3 PCS

Eclipse 902-335 4″ X 8″ SOLDERING SPONGES – 3 PCS
4″ X 8″ Soldering Sponges – 3 pcs. Can be cut to any size.

4″ X 8″ Soldering Sponges – 3 pcs. Can be cut to any size.

Receptacle – powerCON TRUE1 TOP – male – power in – 1/4″ flat tab terminals – IP 65 and UV rated. The powerCON TRUE1 TOP is a locking 16 A true mains connector for outdoor applications. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection.
The powerCON TRUE1 TOP is a connector with breaking capacity (CBC), i.e. it can be connected or disconnected under load or live.

This gun will do cable tie widths from 3/32″ – 3/16″ and thickness up to 1.6mm. It has an adjustable tension control and neatly cuts the ends of cable ties.

This connector is fully compliant to the device standard IEC 62368-1, due to its component certification according to IEC 60320-1.
Appliance inlet connector, 3/16″ flat tab terminals, blue
The powerCON XX is a locking mains connector. It replaces appliance couplers wherever a very reliable solution in combination with a locking device is needed in order to guarantee a safe power connection.
The powerCON XX is a connector with breaking capacity (CBC), i.e. it can be connected or disconnected under load or live.



Feed through HDMI, IP65 rated, black. Compatible with both standard HDMI patch cables and Neutrik’s locking, pre-terminated NKHDMI-* cable assemblies.
Easily integrated into video networks, Neutrik’s HDMI solutions transmit video signals at the full HDMI 2.0 specification with cables up to 3 meters in length.

PoE Tester
LAN Cable Tester

Feed through USB 2.0 compatible, reversible, IP65 rated, black. As digitization spreads, interface problems among audio/video networks, IT equipment, MP3 camcorders, etc. continue to increase.
Neutrik’s reversible USB gender changer, mounted in the standardized D-shape housing, solves these issues.
Compatible with both standard USB patch cables and Neutrik s locking, pre-terminated NKUSB-* cable assemblies.
Reversible USB 2.0 gender changer (type A and B), black D-housing.

The Eclipse MT-7509 Fiber Optic Laser Tester is a light source used to locate breaks and misconnections in fiber optic cables. It is an ideal instrument to find the broken or bent patch cords, especially in fiber identification among ribbon or bunched optic fiber pigtails during the installation, in which identifying fiber from end to end may be troublesome or time-consuming. It as a 635nm Class III A laser source with an output power of 5mW and it can be used on SM (single mode) fibers.
The MT-7509 projects a highly visible red light into a fiber optic cable. The operator simply looks at the length of cable and where light is seen, there is a break. Equipped with a high-power, extra long-life, 635nm Class III A laser diode, it operates in a Continuous mode. Any breaks will be seen as a conspicuously glowing red light point.
VFL

Feed through USB 3.0 compatible, reversible – nickel. The NAUSB3 is a reversible USB 3.0 feed through adapter. The standardized D-shape housing of the adapter fits into conventional patch panels and offers an additional protection for the connector.
Not compatible with NKUSB-* cables.

Feed through USB 3.0 compatible, reversible – black. The NAUSB3-B is a reversible USB 3.0 feed through adapter. The standardized D-shape housing of the adapter fits into conventional patch panels and offers an additional protection for the connector.
Not compatible with NKUSB-* cables.

9.4″ x 7.6″ x 1.7″

Receptacle – BNC – D style – feedthrough – isolated – black – 75 Ohm. Neutrik’s BNC chassis connectors offer a true 75 Ohm design for serial and digital (HD) signals. The machined brass connector body provides an extremely rugged and non-abrasive connection over long term use and is in addition recessed and therefore well protected in a D-shape housing (audio industry standard).

17 pc Tool Kit is a professional, portable and complete kit. Perfect fit for Apple products, also allows opening of many other devices as well without any damage.

Cable end BNC rearTWIST -Cable O.D. 4 – 8mm – 1.6 mm and 7.36 mm crimps – use Die Suffix -U or -PU – 75 Ohm
The patented rearTWIST boot guarantees easy access even in high density applications and offers color coding.
The rearTWIST HD BNC cable connector offers a true 75 Ohm design and is perfectly suitable for HD applications. Suitable cables:
Belden 1694A (ANH), Belden 4694R, Bryant BD SD11, Canare L-4.5CHD, Clark Wire CD7506-0, CommScope 5765, Gepco VSD2001, Suhner S05163-02, Suhner S05133-07, Percon VK77
Crimp size:
Pin: 1.6 mm (square)
Shield: 7.36 mm (hex)


Universal D-size metal body XLR panel mount series for PCB mount applications. Insert is removable from shell for ease assembling. UL recognized component.