The Open Barrel Contact Crimping Tool performs electrical crimp & strain relief crimp simultaneously. Crimping cavities are precision ground and heat treated for long life. Spring loaded for ease of use with locking latch for storage. Soft feel molded handles for comfort.
ESD Grounding Wrist Strap, 6′
TNC 3pc Connector for RG58C/U and RG58A/U Machined Brass Connector Body with Nickel PlatingGold Plated Captive Contact PinCan be Crimped or Soldered
Hosa GPM-179 1/8-inch TRS to 1/4-inch TS Adapter is designed to adapt a mini stereo phone plug to a mono phone output. It applies mono equally to stereo left and right.
DeoxIT® Fader F-Series – Moving Contact Lubricant for Conductive Plastic Faders and Controls
Part No. F5S-H6 Spray:
Using Adjustable Low-Med-High Valve
Applicator: Spray, provides flushing action, briefly flammable (until solvent evaporates within 2-3 minutes).
Formulation: 5% DeoxIT® Fader (active ingredient), 75% odorless mineral spirits (carrier solvent), 20% propellant
Use: Solvent is slower to evaporate, providing flushing action to remove surfaces dirt, grease and other contaminants. Is ideal for connectors and components removed from equipment or those that are easily accessible.
Notes: Use when over spray not an issue. Formulation safe on plastics. Always recommend testing for compatibility, especially on critical/sensitive parts, and vintage equipment with aging ABS plastic(s). On rubber, may swell until solvent evaporates. For quick-dry, non-drip spray, we recommend Part No. FN5S-2N. Need more tactile feel, use the DeoxIT® Fader Grease after cleaning with DeoxIT® Fader F-Series.
Metal and/or Plastic: Not sure if faders have plastic and/or metal components, we recommend using DeoxIT D-Series, Part No. D100S-2 (100% DeoxIT spray).
INFO: Using DeoxIT® Sprays, Cautions, Warnings and Best Practices (caig.com/d-sprays).
DeoxIT® Fader F-Series is a precision lubricant and treatment for moving contact surfaces (faders, switches, potentiometers and other mechanisms with sliding surfaces). It replenishes lubrication lost on surfaces that have been cleaned with solvents or other cleaning solutions.
Over time these conductive plastic components lose their original lubrication from wear and/or repeated cleaning. Dust, dirt, drink spills and other contamination also degrade the components’ lubricant. The need for re-lubrication is necessary to avoid excess wear and abrasion to the plastic surfaces. Another use for DeoxIT® Fader is on conductive membrane switches and components. Oil, grease and acids build up on the membrane surfaces due to repeated finger contact and can lead to device malfunction. Applying DeoxIT® Fader will provide a long-lasting barrier against these types of contamination. The oil, grease and acids will be displaced above the DeoxIT® Fader layer preventing contact with the plastic membrane.
For reference, DeoxIT® Fader F-Series has approximately 1% cleaning action.
C02018 Duster with THREE 16 gram carbon dioxide cartridges
A high velocity, residue free stream of gas, perfect for cleaning cameras, camcorders, electronics, musical instruments, sewing machines, electric razors, smoke detectors and much more. Additionally, carbon dioxide gas will not break down delicate lubricants, inks and dyes.
If you currently use an aerosol duster, you may have heard it referred to as “canned air”. However you should know there is no such thing as “CANNED AIR”. All you have to do is read the warning label on traditional aerosol dusters to see they contain chemicals that emit harmful and potentially toxic or flammable vapors. Not only are you exposing yourself to these dangerous chemicals, but your family, pets or co-workers as well. In addition, these chemicals can leave a residue that adversely effect delicate materials and sensitive equipment! There is an alternative to harmful aerosols and that is carbon dioxide gas. Carbon dioxide is a pure gas that exists naturally in Earth’s atmosphere, so it is not dangerous to human health. In fact, carbon dioxide gas is part of the Earth’s “Cycle of Life” – plants absorb carbon dioxide as food and produce oxygen as waste, which humans and animals then breathe. It is also an environmentally friendly gas that demands much less energy to produce than synthetic aerosols chemicals. Carbon dioxide gas is totally safe to use on all types of electronics, musical instruments, electric razors, sewing machines, smoke detectors, lab equipment, forensics, tablets and phones. Additionally delicate lubricants, inks, toner, fabric, dyes will not be adversely effected by carbon dioxide gas. And unlike aerosol cans that can only be partially recycled, the CO2’s empty steel cartridges are 100% recyclable. The CO2 is our smallest unit, perfect for travel and working in tight areas. This model includes a precision valve and nozzle with 3 each – 16 gram carbon dioxide cartridges.
IMPORTANT NOTE: Liquefied gas under pressure will naturally produce a “cold effect” when discharged. Unlike large aerosol canisters, the CO2 is a very tiny unit and does not have the same surface area to dissipate the cold as as large units, so it is important to follow the CO2’s operating instructions; DO NOT FULLY DEPRESS THE TRIGGER. ONLY USE QUICK, SHORT BURSTS. By doing so you will reduce the “cold effect” and keep the output pressure as high as possible.
Click here for replacement cartridges: CO-42104 16gram cartridges, 3/pk
| 1440 Top Loader Case Interior Dimensions: 17.10″ x 7.50″ x 16.00″ (43.4 x 19 x 40.6 cm) |
|
19 pin extension harness/test cable for Bar Top slot machines
The Ripoffs CO-44 Tool/Flashlight Utility Holster is an extremely versatile and effective holster for all of your needs. Includes 3 large front pockets and one 4×4 thin back pocket. Fits a variety of tools including “super” size Multi-tools, Markers, and many others. Fits a variety of flashlights including the Streamlight Scorpion, Task light 2 AA, Surefire 6P, 6Z Combatlight, Nitrolon G2, and more.
For SureFire, Scorpion, or ASP flashlights or large knife. Center pocket will hold Marker/Tic-Tracer/shears, or Mini-Mag. Outer pocket for Gerber, Super-Tool, Swiss Army-Knife, Has or 4″ open back for a variety of tools or EMT gloves.
Upgrade for 1 dollar Coin Mech unit
In-store pickup or local delivery only.
16oz. Contact Cleaner, Aerosol. This innovative solvent blend of Honeywell’s HFC-245fa and 1,2-trans-dichloroethylene is a direct replacement for solvents containing HCFC-141b. Designed for removing oils, greases, silicones, dirt, and grim from switches, relays, contact pads, and other electrical connections. Non-ozone depleting. Non-flammable. Safe on most plastics. Rapidly evaporating.
Energizer® Alkaline batteries are available in a wide variety of sizes to fit most applications and operate well in extreme temperatures, and they can be stored for a up to 7 years before use.
Classification: Alkaline
Chemical System: Zinc-Manganese Dioxide (Zn/MnO 2)
Designation: ANSI-1604A, IEC-6LR61
Nominal Voltage: 9.0 volts
Operating Temp: -18°C to 55°C (0°F to 130°F)
Typical Weight: 45.6 grams (1.6 oz.)
Typical Volume: 21.1 cubic centimeters (1.3 cubic inch)
Jacket: Metal
Shelf Life: 5 years at 21°C
Terminal: Miniature Snap
Price per box of 12
$1.59 each x box of 12 = $19.08
Batteries are excluded from free shipping.
Our battery pricing is extremely competitive for bulk purchases. Call for quantity pricing & special shipping rates.
| 1-11 | $29.92 | |
| 12-49 | $25.64 | |
| 50-99 | $23.93 |
Contact us for quantity pricing over 100 pcs.
TERMINALS: “F2″: Quick disconnect tabs (0.250″ x 0.032”) mate with AMP. INC. FASTON “250”
Nominal Voltage ………………………………………………………………12 volts (6 cells)
Nominal Capacity
20-hr. (600mA to 10.50 volts) ………………………………………………. 12.0 AH
10-hr. (1.1A to 10.50 volts) …………………………………………………… 11.0 AH
5-hr. (2.1A to 10.20 volts) …………………………………………………… 10.5 AH
1-hr. (7.25A to 9.00 volts) ……………………………………………………. 7.25 AH
15-min. (21.5A to 9.00 volts) ……………………………………………………..5.38 AH
Approximate Weight ………………………………………………….. 7.92 lbs. (3.59 kg)
Energy Density (20-hr. rate) …………………………. 1.69 W-h/in3 (103.41 W-h/l)
Specifi c Energy (20-hr. rate) ………………………… 18.18 W-h/lb (40.08 W-h/kg)
Internal Resistance (approx.) ……………………………………………… 20 milliohms
Max Discharge Current (7 Min.) ……………………………………….. 36.0 amperes
Max Short-Duration Discharge Current (10 Sec.) ……………. 120.0 amperes
Shelf Life (% of nominal capacity at 68°F (20°C))
1 Month ………………………………………………………………………………………… 97%
3 Months ……………………………………………………………………………………….. 91%
6 Months ………………………………………………………………………………………. 83%
Operating Temperature Range
Charge .. ………………………………………………….. -4°F (-20°C) to 122°F (50°C)
Discharge ……………………………………………….-40°F (-40°C) to 140°F (60°C)
Case …………………………………………………………………………………………ABS Plastic
Power-Sonic Chargers ……………………………………. PSC-122000A, 122000A-C
Batteries do not qualify for free freight promotion
What’s included:
Replacement for PTE500 PT-E500 which has been discontinued
NSI UF cable splice kit will accommodate 14/3 through 8/3 with ground UF cable and create a direct burial splice. Contains one four-position connector. For simplified splicing of UF cable designed with heavy wall heat shrink with sealant. 600-volt maximum, supplied in attractive, clear point-of-purchase packaging.
The Platinum Tools 16801C Open Barrel Contact Crimp Tool performs electrical crimp & strain relief crimp simultaneously. Crimping cavities are precision ground and heat treated for long life. Spring loaded for ease of use with locking latch for storage. Soft feel molded handles for comfort. Platinum Tools, founded in 1997, was created based upon two very simple objectives. First, develop and source the absolute best possible solutions for the preparation, installation and hand termination of wire and cable. Second, implement an operational infrastructure that can deliver these products in an efficient, timely and high quality manner. All Platinum products absolutely must satisfy three critical benchmark criteria, utility of function, quality of function, and economic value.
| Brand | Platinum Tools |
|---|---|
| Color | Yellow |
| Grip Type | Ergonomic |
| UPC | 899740000322 |
| Manufacturer | Platinum Tools |
| Global Trade Identification Number | 00899740000322 |
| Part Number | 16801C |
| Item Weight | 9.2 ounces |
| Product Dimensions | 8 x 4 x 1 inches |
| Item model number | 16801C |
| Item Package Quantity | 1 |
| Number of Handles | 2 |
| Batteries Required? | No |
Simple to operate and a pleasure to use, the 15030C Two-Level Coaxial Cable Stripper from Platinum Tools has an adjustable stripping depth, but comes pre-set with the industry standard 1/4″ stripping size. Your E Series cable stripper includes a hex wrench for adjusting blade depth and uses drop-in replacement blades. For strength and durability, this tool is made of molded, high-impact plastic.