Jonard Tools DPT-200 Antistatic Desolder Pump Tip For DP-200

Desoldering Pump Replacement Tip for DP-200

Jonard Tools EX-2 DIP/IC Extractor (24-40 Pins)

Designed to extract internal components from DIP Sockets as well as LSI, MSI, and SSI Devices, this DIP/IC Extractor is perfect for removing chips with 24-40 pins. This DIP/IC Extractor features the following:

Built-in grounding lug helps protect from short circuiting or static discharge
Specially designed hooks firmly grasp chips without damaging them.

Jonard Tools EX-5 PLCC Extractor (20-128 Pins), ESD Safe

Designed to extract Plastic Leaded Chip Carriers (PLCC) without damaging them, this PLCC Extractor is perfect for removing PLCCs with 20-128 pins. This DIP/IC Extractor features the following:

ESD-safe housing protects the chips from accidental static discharge
Spring-loaded design requires no pulling at all, simply squeeze the handles and the chip is lifted from the socket
Stainless steel construction provides long life and durability

Jonard Tools EX-6 PLCC Extractor (20-128 Pins)

Designed to extract Plastic Leaded Chip Carriers (PLCC) without damaging them, this PLCC Extractor is perfect for removing PLCCs with 20-128 pins. This DIP/IC Extractor features the following:

Spring-loaded design requires no pulling at all, simply squeeze the handles and the chip is lifted from the socket
Stainless steel construction provides long life and durability

Jonard Tools FCC-125 Fiber Connector Cleaner 1.25mm

Jonard Tools FCC-125 Fiber Connector Cleaner 1.25mm

The Jonard Tools FCC-125 quick click ferrule end face cleaner is designed to provide exceptional cleaning performance by cleaning LC connectors beyond the critical fiber core area and cleaning deep into the contact area of a bulkhead adapter or connectors on fiber optic cables. The tethered dust cap provides protection for the micro fiber cleaning fabric and is an adapter for connector end face cleaning.

The FCC-125 features a patented 360 degree Rotational Tip for extra wide cleaning, easy one push operation and extendable nozzle, providing an additional 1.5 inches for a nozzle length of 4 inches to aid in accessing deep ports or crowded access panels. Additionally the FCC-125 uses a non-woven micro fiber that is lint free. The FCC-125 provides 800 cleanings and the outer body is made from static dissipative material for safe ESD work.

Jonard Tools patented cleaning technology features:

Slide-Guide™ non-slip micro tape feeder guarantees high reliability
Dual Rotational tip provides superior ferrule End face cleaning

Jonard Tools FCC-250 Fiber Connector Cleaner, 2.5 mm

Featuring a patented 360 rotational tip for extra-wide cleaning, the FCC-250 Fiber Connector Cleaner provides exceptional cleaning performance on 2.5 mm ferrules in recessed fiber optic adapters or individual FC, SC, and ST connectors. This fiber connector cleaner features the following:

Slide-Guide non-slip micro tape feeder guarantees consistent cleaning
Dual rotational tip and one-push operation makes cleaning ferrule end-faces quick and easy
Flip-open cap makes it easy to insert connectors for cleaning
Can be used for over 800 cleanings and has a visual indicator to see how much cleaning material is left
Static-free housing and cleaning cloth make this tool perfect for ESD-safe work
Great for many applications (satellite communication systems, military and civilian maritime optical networks, aviation, broadcasting and HDTV, fiber to the antenna for WiMax and cellular networks, outside plant and fiber to the home, cable television head end, data centers, telecom central offices) and crush resistant to over 250N, impact resistant to survive drops over 1.5M
Jonard cleaners meet or exceed all current and emerging standards for fiber cleanliness in high power laser applications (Telcordia GR-2923-CORE, iNEMI, IEC 61300-3-35, Cisco EDCS 7027180)

Jonard Tools FDC-66 Fiber Scraps Disposal Can

The Fiber Scraps Disposal Can allows safe disposal of cleaved fiber ends. The disposal can features the following:

Twist lock cover locks scraps in the disposal can for safe and easy disposal
Disposal can has a 2 oz capacity with a paperboard body and plastic top and bottom
Lightweight design to accommodate any tool kit or splice/connector station

Jonard Tools FOD-2000 Fiber Optic Drop Cable Slitter

Jonard Tools FOD-2000 Fiber Optic Drop Cable Slitter

The FOD-2000 Fiber Optic Drop Cable Slitter is a patented tool that simplifies the slitting of drop cable jackets at the end of the cable or mid-span and was developed specifically for FTTH technicians working with flat fiber drop cables. For flat cables, where the width is .305″-.350″ and the height is .155″-.185″. These are the dimensions of a typical Corning SST-Drop flat cable with a jacket thickness of 0.03-0.04 inches. The tool will work on other cables with similar dimensions.

The FOD-2000 puts a slit on both sides of the jacket allowing easy access to the fiber or strength member. The ease of use makes this tool truly unique! To use just position the tool around the cable, pull and slit. A simple twist of the cable allows the jacket and strength members to separate from the buffer tube leaving the fiber undamaged.

Designed for .250″ flat drop cables. The FOD-2000 comes completely assembled with two blades, which can be reversed once the blades are worn. Replacement blades are also available under part number FOD-RB25 for a package of 25 blades.

Jonard Tools JIC-175 Ergonomic Fiber Optic Stripper, 250 micron

The Jonard Tools JIC-175 Ergonomic Fiber Optic Stripper is made with preset factory settings and no adjustments required. This fiber optic stripper is designed to strip 250 micrometer buffer coating to expose the 125micrometer optical fiber in fiber optic cables. This fiber optic stripper features the following:

Unique design strips 250-micron buffer to expose 125-micron optical fiber without damaging the fiber
Blades are ground and hardened for higher durability and longer life
Ergonomic thermoplastic rubber (TPR) handles are comfortable and easy to use

Jonard Tools JIC-186 Wire & Kevlar Cutting Shears

The Jonard Tools JIC-186 Wire and Kevlar Cutting Shears are designed to cut Kevlar, cabling insulation, tape, cable ties, and other materials with ease. These cutting shears feature the following:

High carbon stainless steel blades are heat-treated to HRC 58-60 for longer life and durability
Handles are made of dual component nylon and Santoprene material and are ergonomically designed for superior comfort and long term durability
Adjustable with joint screw under the protective cap
Serrated blade for gripping as well as sharp and durable cutting

Jonard Tools JIC-22035NT/10 Probe Picks (Spudger pack of 10)

Designed with an uninsulated L-shaped wire hook extension on one end and a 3/16″ wide flat notched end on the other, this probe pick is perfect for guiding, probing, separating, and removing wire and insulation debris from network punch-down panels and jacks. This probe pick features the following:

Two small notches on the flat end help grasp wires and electrical contacts
Made of a resiliant ABS material for high durability and insulating properties
Can also be used to probe electrical contacts without damaging them
Includes (10) probe picks without shrink tubing

Jonard Tools JIC-375 Fiber Optic Stripper, Three Hole

The Jonard Tools JIC-375 Three Hole Fiber Optic Stripper performs all common fiber stripping functions. This fiber optic stripper features the following:

Strips the 1.6 mm-3.0 mm fiber cable jacket, 600-900 micron buffer coating, and 250 micron acrylate coating to expose the 125 micron glass fiber
First hole strips the 1.6 mm-3.0 mm jacket exposing the optical fiber and Kevlar strength members
Second hole strips the buffer coating, exposing the acrylate coating on the optical fiber
Third hole strips the acrylate coating exposing the glass fiber without nicking or scratching the fiber
Angled jaw guides fiber into the 3rd hole to prevent accidental cutting of the fiber
Safety lock allows the tool to be easily stored when not in use
Tool is made of strong high carbon steel and handle is made of TPR (thermoplastic rubber) for high durability and greater comfort

Jonard Tools KSW30BLK-0100 30 AWG Kynar Wire CSW, Low Strip Force, Black, 100 ft

Typically used where flexibility, strength, and low weight is required, Kynar wire is ideally suited in wire wrap, power supply, medical, and aerospace applications. It is also commonly used for circuit board prototyping because of its lighter weight and smaller overall diameter. Additionally, Kynar insulation provides excellent mechanical properties over a large temperature range and is resistant to an extensive range of chemicals including most inorganic and organic acids, bases, alcohols, halogenated solvents, and aliphatic & aromatic hydrocarbons. These properties make Kynar wire an excellent choice when working in even the harshest environmental applications. This wire also features the following:

Low strip-force Kynar insulation is further processed to provide a low strip force for use with CSW bits and sleeves (RoHS Compliant)
OHFC (oxygen-free high conductivity) silver-plated copper conductor provides exceptional electrical conductivity and flexibility
Kynar insulation provides high temperature resistance (up to 105C) and excellent abrasion resistance
Meets or exceeds UL 1423 standards

Jonard Tools PT-300 Pocket Continuity Tester and Toner

Jonard Tools PT-300 Pocket Continuity Tester and Toner

The PT-300 pocket-sized toner is a drop cable continuity tester and cable identifier. Easy to use and runs on a standard AAA battery. Will test up to 5,000 feet. On-off switch in the base of the unit. Toner is turned on when the speaker is unscrewed from the base. Voltage protected to 52VDC. 5″

Designed to help identify cables prior to connecting CATV, Satellite or other transmitting – receiving systems.

Loud tone identifies line carrying signal.
LED light indicates splitters, DC shorts and other self grounding devices in cable.
Convenient on/off switch extends battery life.
Right angle male push-on connector for working in confined areas.
Accurate up to 5,000 feet (1,500 m).
High quality AAA battery for operation (included).
Clear markings on the barrel for use and battery replacement.
Connect the toner without emitting a tone. Now a discretionary option.
Voltage Protected to 52V DC
Just 5″ long, weighs 2 oz. (57 g)

View brochure

Jonard Tools TK-350 Fiber Optic Tool Kit with Kevlar Cutter

Jonard Tools TK-350 Fiber Optic Tool Kit with Kevlar Cutter

Kit includes:

JIC-375 Three Hole Fiber Optic Stripper

The first hole of this Fiber Optic Stripper strips the 1.6-3 mm fiber jacket down to the 600-900 micron buffer coating. The second hole strips the 600-900 micron buffer coating down to the 250 micron coating and the third hole is used to strip the 250 micron cable down to the 125 micron glass fiber without nicks or scratches.

JIC-186 Wire & Kevlar Cutting Shears

High carbon stainless steel blades (heat treated to HRC 58-60) designed to cut Kevlar®, cabling insulation, tape, cable ties and other material. Ergonomic handles for user comfort and durability. Adjustable joint screw under protective cap, serrated blade grip material, sharp and durable 6″ long.

H-60 Molded Two Tool Pouch

Made of durable PVC material with metal clip.

Jonard Tools VFL-150 Visual Fault Locator Kit

Designed to detect fiber breakpoints, fiber leaks, poor connections, and stress points, this visual fault locator is perfect for field personnel detecting faults in fiber optic cables. This VFL Kit features the following:

Includes adapter for 1.25 mm LC connectors
650 nm Class IIIA laser diode identifies faults in single and multi-mode fiber up to 3 miles long
Universal connector accommodates 2.5 mm ferruled connectors, such as FC, SC, and ST connectors
Has three different modes: Continuous wave, pulsing, and slower pulsing mode
Works in OTDR dead zones and is used for end-to-end visual fiber identification
Light and portable pen-style design is perfect for on the go use
60 hours of battery life powered by two AAA batteries (included)

110405 HDMI Extender Using Cat5e/6 Cable, Extends Up to 98ft

Use this simple and effective HDMI® extender to send High Speed (1080p) HDMI® signals up to 30 meters (98 feet) over Cat5e/6 cable!

Most extenders are small boxes, which must be mounted and which require additional cables to use. While they can usually handle longer distances, if you don’t need to take the signal more than 30 meters, this simple pair of extender adapters is the right solution.

Each adapter plugs into your HDMI ports, with the sender in the source device and the receiver at the display. Then just run a pair of Cat5e/Cat6 cables between the adapters and you’re in business! You won’t need to provide external power – it gets the power it needs from the HDMI source device.

The 110405 HDMI Extender Using Cat5e/6 Cable, Extends Up to 98ft adapters support up to 1080p resolutions and digital audio, including DTS® Digital, DTS-HD Master Audio™, and Dolby TrueHD™. They support up to 8-bits per channel (24-bit total) Deep Color and HDCP™ pass-through.

Up to 30 meter transmission distance over Cat5e/6 UTP cable
Supports up to 1080p resolution
Supports LPCM, DTS® Digital, DTS-HD Master Audio™, and Dolby TrueHD™ audio
Supports HDCP™ pass-through
165 MHz/1.65 Gbps bandwidth
Supports 8-bits per channel (24-bits total) Deep Color
No setup required, just plug it in and start using it!
Uses IEEE-568B UTP wiring standard
Lightweight plastic construction
8″ cable on each adapter
Gold-plated HDMI® connectors

Amphenol 112556 BNC Male 4pc Crimp Connector for 25AWG Mini Coax

BNC Male 4pc Crimp Connector for 25AWG Mini Coax

This four piece BNC connector is designed for use with West Penn 825 and similar miniature 75ohm coax cables.

Nickel plated brass body with gold plated copper center pin.

Delrin insulator supports the center conductor found in miniature coaxial cable.