Eclipse 900-039 PLASTIC BOX W/DIVIDERS 10 X4.75 X 1.5

Eclipse 900-039 PLASTIC BOX W/DIVIDERS 10 X4.75 X 1.5

Eclipse 900-039 PLASTIC BOX W/DIVIDERS 10 X4.75 X 1.5

Up to 12 compartments with removable partitions.




Nebo WLT-0006 SLYDE+ Flashlight Worklight, AAA Batteries

Nebo WLT-0006 SLYDE Flashlight Worklight, AAA Batteries

2-in-1 Sliding Work Light & Flashlight

The SLYDE is a perfect light to keep around the house in case of emergencies. The SLYDE comes equipped with a powerful flashlight, slide-to-reveal work light, programmable memory settings for each light mode, a C•O•B red light function with flashing red for emergency signaling, a 4x adjustable zoom, and instant slide on!
  • Flashlight – Maximum (400 lumens) – 2 hours / 89 meters
  • Flashlight – Minimum (40 lumens) – 20 hours / 28 meters
  • Work Light – Maximum (400 lumens) – 3.5 hours / 32 meters
  • Work Light – Minimum (40 lumens) – 25 hours / 10 meters
  • Red – Maximum (40 lumens) – 2 hours / 9 meters
  • Red – Minimum (4 lumens) – 8 hours / 4 meters
  • Red Hazard Flasher (40 lumens) – 9 hours / 9 meters
  • Convex lens
  • Tactical edge
  • 4x adjustable zoom
  • Fully dimmable
  • Direct-to-Red Feature (hold button and slide open)
  • Memory Power Setting
  • Powerful magnetic base
  • Anodized aircraft-grade aluminum; water-resistant (IPX4) and impact-resistant (up to 1 meter)
  • Powered by 4 x AAA batteries (included)



Eclipse 900-040 PLASTIC BOX W/DIVIDERS 11 X 7 X 1.75

Eclipse 900-040 PLASTIC BOX W/DIVIDERS 11 X 7 X 1.75

Eclipse 900-040 PLASTIC BOX W/DIVIDERS 11 X 7 X 1.75




Neutrik 103F Single Gang Wallplate With One NC3FD-L-1 Receptacle

Neutrik 103F Single Gang Wallplate With One NC3FD-L-1 Receptacle

Neutrik 103F Single Gang Wallplate With One NC3FD-L-1 Receptacle

Wallplate – single – NC3FD-L-1




Eclipse 900-041 PLASTIC BOX W/DIVIDERS 8 X 5.25 X 1.5

Eclipse 900-041 PLASTIC BOX W/DIVIDERS 8 X 5.25 X 1.5

Eclipse 900-041 PLASTIC BOX W/DIVIDERS 8 X 5.25 X 1.5




Neutrik 203F Single Gang Dual Wallplate With Two NC3FD-L-1 Receptacles

Neutrik 203F Single Gang Dual Wallplate With Two NC3FD-L-1 Receptacles

Neutrik 203F Single Gang Dual Wallplate With Two NC3FD-L-1 Receptacles

Wallplate – dual – NC3FD-L-1




Eclipse 900-043 Utility Compartment Box

Eclipse 900-043 Utility Compartment Box

Eclipse 900-043 Utility Compartment Box

Get organized! Store parts, components, screws and other hardware on both sides. Made of high impact plastic.

  • Utility compartment box with a two-sided lid
  • This box is used to store small hand tool or tool compartments
  • Contains plastic box with dividers
  • The box measures 6.5 inches X 3.75 inches X 1.75 inches in size

 




Neutrik 203M Single Gang Dual Wallplate With Two NC3MD-L-1 Receptacles

Neutrik 203M Single Gang Dual Wallplate With Two NC3MD-L-1 Receptacles

Neutrik 203M Single Gang Dual Wallplate With Two NC3MD-L-1 Receptacles

Wallplate – dual – NC3MD-L-1




Eclipse 900-068 6″ ADJUSTABLE WRENCH

Eclipse 900-068 6" ADJUSTABLE WRENCH

Eclipse 900-068 6″ ADJUSTABLE WRENCH

  • Economy type
  • Knurled adjustable screw
  • Drop forged
  • PVC coated handles



Neutrik BSX-5-GREEN Bushing For Color Coding – Green

Neutrik BSX-5-GREEN Bushing For Color Coding - Green

Neutrik BSX-5-GREEN Bushing For Color Coding – Green

Colored boot – X series -Green




Eclipse 900-072 CURVED TWEEZERS

Eclipse 900-072 CURVED TWEEZERS

Eclipse 900-072 CURVED TWEEZERS

Stainless steel tweezers for every need. Ideal for picking up small components in hard to reach places, as well as component assembly on pc prototype boards. Non magnetic.




Neutrik BSX-9-WHITE Bushing For Color Coding – White

Neutrik BSX-9-WHITE Bushing For Color Coding - White

Neutrik BSX-9-WHITE Bushing For Color Coding – White

Colored boot – X series -White




Eclipse 900-100 6 Pc Soldering Aid Set

Eclipse 900-100 6 Pc Soldering Aid Set

6 Pc Solder Aid Set

 

  • 6 Double-ended Picks and Brushes

 




Eclipse 900-114 Static Protection Mat W/Ground Strap 24″x 48″

Eclipse 900-114 Static Protection Mat W/Ground Strap 24"x 48"

Electro-static discharge is a major problem with modern electronics circuits that are sensitive to damage from static electricity. If you work in the electronics business, you will need a anti-static protection device.

Features:

  • A one megohm resistor is attached to the middle of the grounding wire for optimum static protection
  • Special durability of antistatic treatment
  • Made of static dissipative materials
  • Top layer: .2mm laminated PVC (white), center layer: 2.7mm PVC foam (black)
  • Resistance: top, center, and bottom layers: 10M~1KMΩ/SQ; combination layer: 1K~1MΩ/SQ
  • Static decay time: less than 0.5 sec
  • Thickness : 3mm

 




Neutrik NA2FBNC 3 Pole XLR Female to BNC Socket (Adapter)

Neutrik NA2FBNC 3 Pole XLR Female to BNC Socket (Adapter)

Neutrik NA2FBNC 3 Pole XLR Female to BNC Socket (Adapter)

Adapter – 3 pin female XLR to BNC jack – pre-wired. Wired according to IEC 268-12:
Pin 2: signal
Pin 1 and 3: connected to ground




Eclipse 900-116 Static Protection Mat W/Ground Strap 20″x 24″

Eclipse 900-116 Static Protection Mat W/Ground Strap 20"x 24"

Eclipse 900-116 Static Protection Mat W/Ground Strap 20″x 24″

Anti-Static Mat w/Ground Strap 20″ x 24″

  • A one megohm resistor is attached to the middle of the grounding wire for optimum static protection.
  • Special durability of antistatic treatment.
  • Thickness : 3mm



Neutrik NA2MBNC 3 Pole XLR Male to BNC Socket (Adapter)

Neutrik NA2MBNC 3 Pole XLR Male to BNC Socket (Adapter)

Neutrik NA2MBNC 3 Pole XLR Male to BNC Socket (Adapter)

Adapter – 3 pin male XLR to BNC jack – pre-wired. Wired according to IEC 268-12:
Pin 2: signal
Pin 1 and 3: connected to ground




Eclipse 900-162C DIE CAST BOX – 7.6″ X 4.4″ X 2.2″

Eclipse 900-162C DIE CAST BOX - 7.6" X 4.4" X 2.2"

Eclipse 900-162C DIE CAST BOX – 7.6″ X 4.4″ X 2.2″

This heavy duty enclosure is made of high quality die cast aluminum. Channeled walls for convenient PCB mounting. Also acts as an excellent heat sink.