Eclipse MT-7509 Visual Fault Locator for LC Fiber Connectors

Eclipse MT-7509 Visual Fault Locator for LC Connectors

The Eclipse MT-7509 Fiber Optic Laser Tester is a light source used to locate breaks and misconnections in fiber optic cables. It is an ideal instrument to find the broken or bent patch cords, especially in fiber identification among ribbon or bunched optic fiber pigtails during the installation, in which identifying fiber from end to end may be troublesome or time-consuming. It as a 635nm Class III A laser source with an output power of 5mW and it can be used on SM (single mode) fibers.

The MT-7509 projects a highly visible red light into a fiber optic cable. The operator simply looks at the length of cable and where light is seen, there is a break. Equipped with a high-power, extra long-life, 635nm Class III A laser diode, it operates in a Continuous mode. Any breaks will be seen as a conspicuously glowing red light point.

Simple, versatile, and user-friendly design
Rugged, compact, and splash proof copper housing
Three operation modes available: “CW” (Continuous wave output), “Pulse” and “Off” modes
Continuous wave output mode (CW) for steady fault illumination
Pulse mode helps to locate faults under high ambient light conditions
Supports LC 1.25mm connectors
The button switch permits easy one handed operation
Handy, pocket pen design
2 AAA-size alkaline batteries provide 50 hours of continuous operation

Light Source Class III A Laser Diode
Central Wave Length 635nm/±10nm
Connector Interface 1.25mm; LC only
Peak Power Output > 0.5mW
Operating Temperature 0 ~ 40°C
Storage Temperature 20 ~ 60°C
Dimensions Length: 6″
Diameter: .5″
Batteries 2 AAA (Not included)

VFL

Eclipse SB-2419 COMPARTMENT STORAGE BOX

9.4″ x 7.6″ x 1.7″

Made from high impact resistant polypropylene
10 Fixed compartments inside
Provides a tight seal around the tops of the compartments which prevents small components from being mixed while closed
Ideal for organizing small parts, screws, nuts, bolts, arts or stationery

Eclipse SD-9314 17 PC TOOL KIT FOR APPLE PRODUCTS

17 pc Tool Kit is a professional, portable and complete kit. Perfect fit for Apple products, also allows opening of many other devices as well without any damage.

17 pc Tool Kit complete all necessary screwdriver bits and tools for many Apple Product Repairs
12pcs bits made from high quality Cr-Mo-V Steel
Polyoxymethylene (POM) opening levers for leverage to open the housing easily and access the inside parts safely
Miniature Suction Cup for removing Apple touch screens without leaving marks on device.
Comes with a prying paddle for opening case without scratching the cover
Excellent solution for opening Apple products or other devices as well, including cell phones and other small electronic devices.

Eclipse TZ-205N TWEEZER, ESD-SAFE, SOFT-GRIP, FINE TIP

ESD safe, soft touch handle provides a secure hold and increases operation comfort.
Ideal for the holding and bending required in fine work applications.
Made of high-quality carbon steel, great for repeated use.

Extech 407026 Heavy Duty Light Meter

FREE UPS GROUND SHIPPING!

Heavy Duty Light Meter with PC Interface

Enhance accuracy by selecting one of four lighting types plus PC interface

Microprocessor assures maximum accuracy plus special functions
Super large 1.4″ LCD display
% displays differential from reference point
ZERO Re-Calibration
Utilizes precision photo diode and color correction filter
Cosine and color corrected measurements
±4% accuracy is enhanced by selecting lighting type
Record/Recall MIN, MAX, and AVG readings
Data Hold plus Auto shut off
Built-in RS232 serial interface, optional software

Extech 407730 Digital Sound Level Meter

Digital Sound Level Meter

±2dB accuracy with 0.1dB resolution
A&C weighting
AC analog output
Record Max/Min values over time
Auto power off and Max Hold functions
Utilizes 0.5″(12.7mm) condenser microphone
Tripod mountable
40 to 130dB measuring range
Fast/slow response time
Tripod mountable

Applications:

Monitoring workplace machinery
Installing audio and alarm systems
Product noise certification and reduction

Extech LT300 Light Meter with Digital and Analog Display

FREE UPS GROUND SHIPPING!

Wide range to 20,000Fc or Lux with high resolution to 0.01 Fc/Lux
Relative mode indicates change in light levels, peak mode captures highest reading
Remote light sensor on 12″ (305mm) coiled cable – expandable to 24″
Utilizes precision photo diode and color correction filter
Large LCD display with analog bar graph
Backlight for readings in low light levels

Extech TL809 Electronic Test Lead Kit

Extech TL809 Electronic Test Lead Kit

8-piece test lead kit ideal for the testing of digital circuitry

Two 42″ (1m) PVC lead extensions with shrouded banana plugs at both ends.
Two modular 4″ (102mm) Heavy Duty test probe handles with 0.16″ (4mm) banana plug tip, CAT III-1000V rating, UL listed.
Two plunger mini-hooks.
Two alligator clips with removable insulators.
Includes 3-compartment sealable nylon pouch to organize/protect your test leads.

FLIR VP50 Non-Contact Voltage Detector

FLIR VP50 Non-Contact Voltage Detector

The FLIR VP50 is a tough, CAT IV-rated Non-Contact Voltage Detector featuring a combination of alerts – tactile vibration and red LED alarms, a powerful LED flashlight, and versatile voltage sensitivities. We engineered the FLIR VP50 to reliably detect voltages on the latest tamperproof outlets and electrical systems installed using modern construction methods.

Low-profile probe tip gets the sensor closer to electrical sources.
Enhanced sensitivity to help detect voltage in the latest safety outlets.
Detect voltage in electrical systems in large industrial facilities, residential
low voltage installations, and systems located behind obstructions (using
High Sensitivity mode).
Drop tested up to 3 meters.
Multiple LED indicators plus worklight.

Jonard Tools DP-200 High Vacuum Desoldering Pump

Jonard Tools DP-200 High Vacuum Desoldering Pump

A specially engineered high vacuum desolder pump made to exacting specifications, ESD safe and providing precise repeatable operation.

This ESD Safe desoldering pump is fitted with a Teflon Tip and is 13″ long including tip. Durable corrosion resistant plastic construction. Precision metal plunger. Corrosion treated springs. Insulated vacuum pulse. Regulated return (1 millisecond ±30%). Uniform reset pressure (11in. lbs. ±20%). Cushioned shock reduction (pulse release to minimize board damage).

FEATURES:

ESD Safe
Teflon Tip
Durable corrosion resistant plastic construction
Precision metal plunger
Corrosion treated springs
Insulated vacuum pulse
Regulated return (1 millisecond ±30%)
Uniform reset pressure (11in. lbs. ±20%)
Cushioned shock reduction (pulse release to minimize board damage)

Jonard Tools DPT-200 Antistatic Desolder Pump Tip For DP-200

Desoldering Pump Replacement Tip for DP-200

Jonard Tools EX-2 DIP/IC Extractor (24-40 Pins)

Designed to extract internal components from DIP Sockets as well as LSI, MSI, and SSI Devices, this DIP/IC Extractor is perfect for removing chips with 24-40 pins. This DIP/IC Extractor features the following:

Built-in grounding lug helps protect from short circuiting or static discharge
Specially designed hooks firmly grasp chips without damaging them.

Jonard Tools EX-5 PLCC Extractor (20-128 Pins), ESD Safe

Designed to extract Plastic Leaded Chip Carriers (PLCC) without damaging them, this PLCC Extractor is perfect for removing PLCCs with 20-128 pins. This DIP/IC Extractor features the following:

ESD-safe housing protects the chips from accidental static discharge
Spring-loaded design requires no pulling at all, simply squeeze the handles and the chip is lifted from the socket
Stainless steel construction provides long life and durability

Jonard Tools EX-6 PLCC Extractor (20-128 Pins)

Designed to extract Plastic Leaded Chip Carriers (PLCC) without damaging them, this PLCC Extractor is perfect for removing PLCCs with 20-128 pins. This DIP/IC Extractor features the following:

Spring-loaded design requires no pulling at all, simply squeeze the handles and the chip is lifted from the socket
Stainless steel construction provides long life and durability

Jonard Tools FCC-125 Fiber Connector Cleaner 1.25mm

Jonard Tools FCC-125 Fiber Connector Cleaner 1.25mm

The Jonard Tools FCC-125 quick click ferrule end face cleaner is designed to provide exceptional cleaning performance by cleaning LC connectors beyond the critical fiber core area and cleaning deep into the contact area of a bulkhead adapter or connectors on fiber optic cables. The tethered dust cap provides protection for the micro fiber cleaning fabric and is an adapter for connector end face cleaning.

The FCC-125 features a patented 360 degree Rotational Tip for extra wide cleaning, easy one push operation and extendable nozzle, providing an additional 1.5 inches for a nozzle length of 4 inches to aid in accessing deep ports or crowded access panels. Additionally the FCC-125 uses a non-woven micro fiber that is lint free. The FCC-125 provides 800 cleanings and the outer body is made from static dissipative material for safe ESD work.

Jonard Tools patented cleaning technology features:

Slide-Guide™ non-slip micro tape feeder guarantees high reliability
Dual Rotational tip provides superior ferrule End face cleaning

Jonard Tools FCC-250 Fiber Connector Cleaner, 2.5 mm

Featuring a patented 360 rotational tip for extra-wide cleaning, the FCC-250 Fiber Connector Cleaner provides exceptional cleaning performance on 2.5 mm ferrules in recessed fiber optic adapters or individual FC, SC, and ST connectors. This fiber connector cleaner features the following:

Slide-Guide non-slip micro tape feeder guarantees consistent cleaning
Dual rotational tip and one-push operation makes cleaning ferrule end-faces quick and easy
Flip-open cap makes it easy to insert connectors for cleaning
Can be used for over 800 cleanings and has a visual indicator to see how much cleaning material is left
Static-free housing and cleaning cloth make this tool perfect for ESD-safe work
Great for many applications (satellite communication systems, military and civilian maritime optical networks, aviation, broadcasting and HDTV, fiber to the antenna for WiMax and cellular networks, outside plant and fiber to the home, cable television head end, data centers, telecom central offices) and crush resistant to over 250N, impact resistant to survive drops over 1.5M
Jonard cleaners meet or exceed all current and emerging standards for fiber cleanliness in high power laser applications (Telcordia GR-2923-CORE, iNEMI, IEC 61300-3-35, Cisco EDCS 7027180)

Jonard Tools FDC-66 Fiber Scraps Disposal Can

The Fiber Scraps Disposal Can allows safe disposal of cleaved fiber ends. The disposal can features the following:

Twist lock cover locks scraps in the disposal can for safe and easy disposal
Disposal can has a 2 oz capacity with a paperboard body and plastic top and bottom
Lightweight design to accommodate any tool kit or splice/connector station

Jonard Tools FOD-2000 Fiber Optic Drop Cable Slitter

Jonard Tools FOD-2000 Fiber Optic Drop Cable Slitter

The FOD-2000 Fiber Optic Drop Cable Slitter is a patented tool that simplifies the slitting of drop cable jackets at the end of the cable or mid-span and was developed specifically for FTTH technicians working with flat fiber drop cables. For flat cables, where the width is .305″-.350″ and the height is .155″-.185″. These are the dimensions of a typical Corning SST-Drop flat cable with a jacket thickness of 0.03-0.04 inches. The tool will work on other cables with similar dimensions.

The FOD-2000 puts a slit on both sides of the jacket allowing easy access to the fiber or strength member. The ease of use makes this tool truly unique! To use just position the tool around the cable, pull and slit. A simple twist of the cable allows the jacket and strength members to separate from the buffer tube leaving the fiber undamaged.

Designed for .250″ flat drop cables. The FOD-2000 comes completely assembled with two blades, which can be reversed once the blades are worn. Replacement blades are also available under part number FOD-RB25 for a package of 25 blades.