Hakko 394 SMD Vacuum Pick Up Tool

Hakko 394 SMD Vacuum Pick Up Tool

Hakko 394 SMD Vacuum Pick Up Tool

Hakko 394 Battery operated SMD vacuum pickup tool:

The 394 SMD vacuum Pick up tool is easy to use and hold. Ideal for handling surface mount components. An ultra-compact high powered pump eliminates need for a power cord and an air tube. The pen is constructed from anti-static material and has a soft touch switch

The Hakko 394 functions using with 2 AAA batteries which are included with the tool.

Contents:

  • 394 Vacuum Pick-up Tool
  • A1165 Bent Nozzle 1.1 mm
  • Manual
  • Case
  • 5 mm Pad (A1312)
  • 10 mm Pad (A1311)
  • AAA Batteries (2)

 

Kiesub Electronics is a leading distributor of Hakko soldering equipment.  Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.



Hakko FR-870B 2-Bank IR Board Preheater

Hakko FR-870B 2-Bank IR Board Preheater

Hakko FR-870B 2‐Bank IR Preheater description:

The Hakko FR-870B is an updated replacement for the popular Hakko FR‐870 IR Preheater that includes an upgrade to use the new high efficiency carbon filament lamps that nearly eliminates the visible spectrum while maintaining a very high output in the infrared spectrum with minimal shadowing, allowing for a very even preheating of the PCB.

The Hakko FR-870B also includes an upgrade to use the new software features found in the FR‐872 4‐ Bank IR Preheater, allowing you to control the ramp rate at 1, 2, or 3 degrees Celsius per second when you are in one of the two thermocouple modes.

The Hakko FR-870B has 2 switchable zones for heating and still offers the same low profile and with a simple integrated PCB holder that is very easy to setup, automatic operation modes allowing for a 3‐ heating zone profile that can be programmed into the system, and a total of 10 profiles that can be stored for each automatic operation mode.

The FR-870B can also be integrated for start/stop operation in conjunction with the popular FR‐803B Hot Air Rework Station, or the FM‐ 206 3‐Port Rework System (integration requires an optional connection cable that is not included).

Kiesub Electronics is a leading distributor of Hakko soldering equipment.  Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.



Hakko N51-05 Hot Air Nozzle

Hakko N51-05 Hot Air Nozzle

Hakko N51-05 Hot Air Nozzle

Hakko N51-05 Hot Air Nozzle:

Kiesub Electronics is a leading distributor of Hakko soldering equipment.  Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.



Hakko N51-04 Hot Air Nozzle

Hakko N51-04 Hot Air Nozzle

Hakko N51-04 Hot Air Nozzle

Hakko N51-04 Hot Air Nozzle:

Kiesub Electronics is a leading distributor of Hakko soldering equipment.  Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.



Hakko N51-03 Hot Air Nozzle

Hakko N51-03 Hot Air Nozzle

Hakko N51-03 Hot Air Nozzle

Hakko N51-03 Hot Air Nozzle:

Kiesub Electronics is a leading distributor of Hakko soldering equipment.  Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.



Hakko N51-02 Hot Air Nozzle

Hakko N51-02 Hot Air Nozzle

Hakko N51-02 Hot Air Nozzle:

Kiesub Electronics is a leading distributor of Hakko soldering equipment.  Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.



Hakko N51-01 Hot Air Nozzle

Hakko N51-01 Hot Air Nozzle

Hakko N51-01 Hot Air Nozzle:

Kiesub Electronics is a leading distributor of Hakko soldering equipment.  Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.



Hakko FM-2023 SMD Mini Hot Tweezer

Hakko FM-2023 SMD Mini Hot Tweezer

Hakko FM-2023 SMD Mini Hot Tweezer with tips and stand.

The Hakko FM-2023 designed for use with small chip components as small as 0201. The Mini Parallel Remover has a unique feature allowing it to work as a standard or reverse action tweezer. A simple flip of a switch sets the action of the tool.

The FM-2023 must be used in conjunction with a FM-203 or FM-202 soldering station. The holder clip (PN: B2848) attaches to a 634 iron holder (634-01, 634-02, 634-03.) The Hakko FM-2023 SMD Mini Parallel Remover removes chips as small as 0201. Note: Tips/Tweezers are NOT included.

Kiesub Electronics is a leading distributor of Hakko soldering equipment.  Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.



Hakko FM2024-21 Desoldering Module Conversion Kit with Sleep Holder

Hakko FM2024-21 Desoldering Module Conversion Kit with Sleep Holder

Hakko FM2024-21 Desoldering Module Conversion Kit features:

The Hakko FM-2024 Desoldering Module extends the versatility of the award winning Hakko FM-202 or thenew FM-203 Soldering Station giving you a complete soldering and desoldering solution, in one modular station.

Building on Hakko’s revolutionary composite tip technology, the desoldering nozzle/tip heater cartridge assembly offers a one-step, quick-change design with fast thermal recovery; the enlarged throat and shortened nozzle design is virtually non-cloggable, making it ideal for NO LEAD applications; and its slender body enables it to reach those difficult-to-reach component pads on densely populated boards.

The Hakko FM-2024 also features an extremely lightweight, reconfigurable handpiece that allows the user the option to use the tool as either a gun or pencil style handpiece by simply removing or adding the Handle.

Included:

  •  Desoldering Handpiece (FM2024-02)
  • Desoldering Control Module (C1492)
  • Desoldering Handpiece Grip (B2872 for Gun Style Configuration)
  • Handpiece Holder (FH200-05 – Includes Hakko 599B Tip Cleaner)
  • Nozzle Remover (B2876)
  • Cleaning Drill (B2873)
  • Sleep Mode Cord (B3253)
  • Filter Pipe (A1511)

Kiesub Electronics is a leading distributor of Hakko soldering equipment.  Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.



LED Soft White Bulb, 9w Equal to 60w

LED Soft White Bulb, 9w Equal to 60w

This Soft White LED Light Bulb gives a warm white glow that creates a relaxing and comfortable mood.
Color Temperature: 3000K
750 Lumens
25,000 hour average life
23 years of 3hr average daily use
$141 Energy savings compared to 60W bulb
Ideal for use in kitchens, living rooms, ceiling fixtures, bedrooms, hallways, table lamps and floor lamps.
UL listed
Non-dimmable
p/n 210805



Hakko FM-205 120W Desoldering / Soldering Station

Hakko FM-205 120W Desoldering / Soldering Station

The Hakko FM-205 Digital Desoldering Tool is very similar to the Hakko FM-204 except that it uses compressed air to generate the vacuum rather than an internal pump. This provides for slightly higher vacuum pressure, increased suction flow, and a lower station cost.

  •  Requires Shop Air.
  • Digital Temperature Control.
  • Temperature range 200 – 450°C (400 – 840°F)
  • Temperature accuracy ±15°C
  • Uses composite nozzles for improved thermal performance.
  • Quick-change composite nozzles (N3 series).
  • Uses low cost disposable filter cartridges.
  • Can be used as a soldering station with a Hakko FM2027 connector.
  • Gun or Pencil-style desoldering handpiece.
  • Less prone to clogging as compared to older desoldering stations when used on lead free applications.
  • Includes low temperature alarm, sleep mode functionality & auto power off.

Included:

  • FM2024-02 desoldering handpiece
  •  A1511 filter pipe assembly
  • B2972 control card
  • FH200-05 sleep stand iron holder
  • 599B-02 wire sponge tip cleaner
  • B2873 cleaning drill
  • B2876 nozzle remover
  • B2300 ESD safe heat resistant pad
  • A1514 ceramic paper filters

Kiesub Electronics is a leading distributor of Hakko soldering equipment.  Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.



Neutrik NJ3FP6C-BAG Locking 1/4″ Phone Jack

Neutrik NJ3FP6C-BAG Locking 1/4″ Phone Jack

The 3 pole phone jack panel mount version provides stable and secure connections where accidental disconnect or shock and vibration may occur. It latches with standard A-gauge mono or stereo plugs. Plug locks-in automatically when mating and unlocks only by pressing red release tab. Standard D size front panel appearance. Selectable grounding options.

  • Securely locking chassis jack
  • Mates with all mono and stereo plugs specified acc. EIA RS-453 (A-gauge)
  • Selectable grounding options: standard isolated, to get a sleeve/panel connection red isolator on lateral screw must be removed
  • Dimensionally compatible with D Series (31 x 26 mm)
  • Solder terminals


Hakko FM-204 Solder/Desolder Station with FM2024-02 Desoldering Tool

Hakko FM-204 Solder/Desolder Station with FM2024-02 Desoldering Tool

The Hakko FM-204-01 ESD Solder/Desolder Station with FM2024-02 Desoldering Tool is a “self-contained” desoldering station offers dual functionality for both soldering and desoldering in one station in a single-port station.

  • Built in vacuum pump.
  • Meets or exceeds J-STD-001 requirements.
  • Auto sleep-mode.
  • Choose either gun or pencil style nozzle.
  • Quick-Change composite nozzle.
  • Works with FM-2027 Soldering Iron (not included).

Included:

  • FM-204 Desoldering Dtation.
  • FM2024-02 Desoldering Handpiece.
  • FH200-05 Iron Holder with 599B Tip Cleaner.
  • Cleaning Drill.
  • Nozzle Remover.
  • Ceramic paper filter.
  • Connector & Power  cords.
  • Key Card

Kiesub Electronics is a leading distributor of Hakko soldering equipment.  Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.



Hakko 485 850W Rework System with Shop Air Unit

Hakko 485 850W Rework System with Shop Air Unit

compatible with LEAD-FREE solder

The Hakko 485 Rework System ESD 850W with Shop Air Unit is a compact, high-performance soldering system developed exclusively for soldering and desoldering components and connectors mounted on PC boards.

Hakko 485 850W Rework System with Shop Air Unit features:

  •  Solder flow is time-controlled and temperature-controlled
  • soldering and desoldering cycles are automatic and precise
  • A built in locator light pinpoints the exact position for placing components
  • Solder remaining in through-holes is completely removed by using the Hakko 486 Air Blower (included with 485-V12)
  • A large selection of nozzle sizes available.
  • Power Comsumption: 850w
  • Temperature Range: normally up to 299°C (570°F)
  • Air Pressure: 2 kg/cm² (4.4 lbs.) – 10 kg/cm² (22 lbs.)

NOTE: Due to the increased use of lead free and other solder compositions, the 485 is shipped with an empty solder pot, saving time and effort for the end-user.

Kiesub Electronics is a leading distributor of Hakko soldering equipment.  Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.



Prime PB922009 6-Outlet Power Strip, 3 foot cord

Prime PB922009 6-Outlet Power Strip, 3 foot cord

Prime Wire PB922009 6-Outlet Power Strip, 3 foot cord

  • 6-Outlets Power Strip
  • Cord is 3 foot long.
  • Built-in Circuit Breaker protects electronics against overloads.
  • Lit On/Off Switch
  • Slim, straight angled plug doesn’t interfere with furniture.


Brother TZe251 Black on White 1″ Label Tape

Brother TZe251 Black on White 1″ Label Tape

This tape features our exclusive laminated tape process and our standard adhesive. Perfect for everyday applications. These labels stay on under normal indoor and outdoor use, including hot and cold environments. Best suited for smooth flat surfaces.

24mm (0.94″) black on white tape for P-touch 8m (26.2 ft)

For use with:

PT-E500, PT-E550W

 



Brother TZe241 Black on White 3/4″ Label Tape

Brother TZe241 Black on White 3/4″ Label Tape

This tape features our exclusive laminated tape process and our standard adhesive. Perfect for everyday applications. These labels stay on under normal indoor and outdoor use, including hot and cold environments. Best suited for smooth flat surfaces.

18mm (0.7″) black on white tape for P-touch 8m (26.2 ft)

For use with:

PT-E300, PT-E500,  PT-E550W



Brother TZe231 Black on White 1/2″ Label Tape

Brother TZe231 Black on White 1/2″ Label Tape

This tape features our exclusive laminated tape process and our standard adhesive. Perfect for everyday applications. These labels stay on under normal indoor and outdoor use, including hot and cold environments. Best suited for smooth flat surfaces.

12mm (0.47″) black on white tape for P-touch 8m (26.2 ft)

For use with:

GL-100, PT-1000, PT-1000BM, PT-1010, PT-1010B, PT-1010NB, PT-1010R, PT-1010RDT, PT-1010S, PT-1090, PT-1090BK, PT-1100, PT-1100QL, PT1100SB, PT-1100SBVP, PT-1100ST, PT-1120, PT-1130, PT-1160, PT-1170, PT-1170S, PT-1180, PT-1180SC, PT-1180SP, PT-1190, PT-1200, PT-1230PC, PT-1280, PT-1280BT, PT-1280SP, PT-1280SR, PT-1280TG, PT-1280VP, PT-128AF, PT-1290, PT-1290BT, PT-1290BT2, PT-1290RS, PT-1290SBVP, PT-1300, PT-1400, PT-1500, PT-1500PC, PT-1600, PT-1700, PT-1750, PT-1750SC, PT-1800, PT-1810, PT-1830, PT-1830C, PT-1830SC, PT-1830VP, PT-1880, PT-1880C, PT-1880SC, PT-1880W, PT-18R, PT-18RKT, PT-1900, PT-1900C, PT-1910, PT-1950, PT-1960, PT-200, PT-2030, PT-2030AD, PT-2030VP, PT-2100, PT-2110, PT-2200, PT-2210, PT-2300, PT-2310, PT-2400, PT-2410, PT-2430PC, PT-2470, PT-2500PC, PT-2600, PT-2610, PT-2700, PT-2710, PT-2730, PT-2730VP, PT-300, PT-300B, PT-310, PT-310B, PT-320, PT-330, PT-340, PT-350, PT-3600, PT-4000, PT-520, PT-530, PT-540, PT-550, PT-580C, PT-6100, PT-7100, PT-7500, PT-9200DX, PT-9200PC, PT-9400, PT-9500PC, PT-9600, PT-9700PC, PT-9800PCN, PT-D200, PT-D200BT, PT-D200DA, PT-D200MA, PT-D200SA, PT-D400, PT-D400AD, PT-D400VP, PT-D450, PT-D600, PT-D600VP, PT-E110, PT-E300, PT-E300VP, PT-E500, PT-E500VP, PT-E550W, PT-E550WVP, PT-H100, PT-H105, PT-H300, PT-H300LI, PT-H500LI, PT-P700, PT-P750W, ST-1150, ST-1150DX, ST-5