Pelican 1510 Carry-On Case

Pelican 1510 Carry-On Case

Waterproof, Crushproof, Dustproof Case
Made of Ultra High Impact Copolymer
FAA-Approved Maximum Carry-On Size
Telescoping Handle & Wheels
Durable Stainless Steel Hardware
Automatic Pressure Equalization Valve
Three-Piece Foam Set is Included
Retractable Extension Handle
Three-Dial TSA Combination Lock
Desiccant Silica Gel Pack

INTERIOR (L X W X D)
19.75″ x 11.00″ x 7.60″ (50.2 x 27.9 x 19.3 cm)
EXTERIOR (L X W X D)
22.00″ x 13.81″ x 9.00″ (55.9 x 35.1 x 22.9 cm)
- BODY: Polypropylene
- LATCH: ABS
- O-RING: Polymer
- PINS: Stainless Steel
- FOAM: 1.3 lb Polyurethane
- PURGE BODY: ABS
- PURGE VENT: 3 Micron Hydrophobic Non-Woven
- PURGE O-RING: 70 Shore Nitrile
- LID DEPTH: 1.79″ (4.5 cm)
- BOTTOM DEPTH: 5.79″ (14.7 cm)
- TOTAL DEPTH: 7.58″ (19.3 cm)
- INT VOLUME: 0.96 ft³ (0.027 m³)
- WEIGHT WITH FOAM: 13.60 lbs (6.2 kg)
- WEIGHT WITHOUT FOAM: 11.99 lbs (5.4 kg)
- BUOYANCY: 64.15 lbs (29.1 kg)
- MINIMUM TEMPERATURE: -40° F (-40 ° C)
- MAXIMUM TEMPERATURE: 210° F (99 ° C)
- WHEELS: 2
- EXTENDABLE HANDLE: yes
- CERTIFICATIONS: IP67 / STANAG 4280 / Def Stan 81-4
Hard rolling travel carry-on case

Powersonic PS-122500 12V 260AH Battery

Powersonic PS-122500 12V 260AH Battery

TERMINALS: Quick disconnect AMP, INC. Faston tabs, 0.250″ x 0.032″

Nominal Voltage: ……………………………………………..12 volts (6 cells)

Nominal Capacity:

20-hr. (13.0A to 10.50 volts) ………………………………….. 260.0 AH

10-hr. (25.0A to 10.50 volts) ………………………………….. 250.0 AH

8-hr. (29.8A to 10.50 volts) ……………………………………. 238.4 AH

5-hr. (43.08A to 10.20 volts) ………………………………….. 215.4 AH

3-hr. (65.05A to 10.20 volts) ……………………………………195.2 AH

1-hr. (152.5A to 9.60 volts) …………………………………….. 152.5 AH

Approximate Weight: …………………………… 161.0 lbs. (73.0 kg)

Energy Density (10-hr. rate) …………… 1.60 W-h/in3 (97.51 W-h/l)

Specific Energy (10-hr. rate) ………… 18.63 W-h/lb (41.08 W-h/kg)

Internal Resistance (approx.) ……………………………… 2.5 milliohms

Max Short-Duration Discharge Current (10 Sec.) ….. 780 amperes

Shelf Life (% of nominal capacity at 68°F (20°C):

1 Month ……………………………………………………………………… 97%

3 Months …………………………………………………………………….. 91%

6 Months ……………………………………………………………………. 83%

Operating Temperature Range:

Charge …………………………………………-4°F (-20°C) to 122°F (50°C)

Discharge ……………………………………..-40°F (-40°C) to 140°F (60°C)

Batteries do not qualify for free freight promotion

Brother TZE111 1/4″ Black on Clear Tape

Brother TZE111 1/4″ Black on Clear Tape

This tape features an exclusive laminated tape process and our standard adhesive. Perfect for everyday applications. These labels stay on under normal indoor and outdoor use, including hot and cold environments. Best suited for smooth flat surfaces.

For Use With:

GL-100, PT-1000, PT-1000BM, PT-1010, PT-1010B, PT-1010NB, PT-1010R, PT-1010S, PT-1090, PT-1090BK, PT-1100, PT1100SB, PT-1100SBVP, PT-1100ST, PT-1120, PT-1130, PT-1160, PT-1170, PT-1180, PT-1190, PT-1200, PT-1230PC, PT-1280, PT-1280SR, PT-1280VP, PT-128AF, PT-1290, PT-1290BT, PT-1290BT2, PT-1290RS, PT-1300, PT-1400, PT-1500, PT-1500PC, PT-1600, PT-1700, PT-1750, PT-1800, PT-1810, PT-1830, PT-1830C, PT-1830SC, PT-1830VP, PT-1880, PT-1880C, PT-1880SC, PT-1880W, PT-18R, PT-18RKT, PT-1900, PT-1910, PT-1950, PT-1960, PT-200, PT-2030, PT-2030AD, PT-2030VP, PT-2100, PT-2110, PT-2200, PT-2210, PT-2300, PT-2310, PT-2400, PT-2410, PT-2430PC, PT-2500PC, PT-2600, PT-2610, PT-2700, PT-2710, PT-2730, PT-2730VP, PT-300, PT-300B, PT-310, PT-310B, PT-320, PT-330, PT-340, PT-350, PT-3600, PT-4000, PT-520, PT-530, PT-540, PT-550, PT-580C, PT-6100, PT-7100, PT-7500, PT-9200DX, PT-9200PC, PT-9400, PT-9500PC, PT-9600, PT-9700PC, PT-9800PCN, PT-D200, PT-D200BT, PT-D200DA, PT-D200MA, PT-D200SA, PT-D210, PT-D400, PT-D400AD, PT-D400VP, PT-D450, PT-D600, PT-D600VP, PT-E110, PT-E300, PT-E500, PT-E550W, PT-H100, PT-H300, PT-H300LI, PT-H500LI, PT-P700, PT-P750W, PT-P750WVP, ST-1150, ST-1150DX, ST-5

Brother TZESE4 3/4″ Black on White Tamper Evident Tape

Brother TZESE4 3/4″ Black on White Tamper Evident Tape

This tape features an exclusive laminated tape process and a special tell-tale adhesive. If the label is removed, a checkerboard pattern is left behind on the item and also on the tape making it obvious that someone has tampered with the label. Primarily used for property security applications. Each tape is 8m (26.2 ft) long.

For Use With:

PT-1000BM, PT-1400, PT-1500, PT-1500PC, PT-1600, PT-170K, PT-1760, PT-1830C, PT-1830SC, PT-1880C, PT-1880SC, PT-1880W, PT-18R, PT-18RKT, PT-1900, PT-1910, PT-1950, PT-1960, PT-2030, PT-2030AD, PT-2030VP, PT-2100, PT-2110, PT-2200, PT-2210, PT-2300, PT-2310, PT-2400, PT-2410, PT-2430PC, PT-2500PC, PT-2600, PT-2610, PT-2700, PT-2710, PT-2730, PT-2730VP, PT-330, PT-350, PT-3600, PT-520, PT-530, PT-540, PT-550, PT-580C, PT-6100, PT-65SB, PT-65SCCP, PT-65SL, PT-65VP, PT-70BBVP, PT-70BMH, PT-70HK, PT-70HOL, PT-70HOT, PT-70SP, PT-70SR, PT-7500, PT-8000XL, PT-80SCCP, PT-9200DX, PT-9200PC, PT-9400, PT-9500PC, PT-9600, PT-9700PC, PT-9800PCN, PT-D400, PT-D600, PT-D600VP, PT-E300, PT-E500, PT-E550W, PT-H500LI, PT-P700, PT-P750W, PT-P750WVP

CAT6 550MHz Patch Cords, Gray

Our CAT6 550MHz Patch Cables are available in 7 colors, are verified to EIA/TIA 568B.2-1 standards, and are ready to use in any 10Base-T, 100Base-TX or 1000Base-TX (Gigabit Ethernet)network. Snagless, with soft molded boots and strain reliefs. Color: White.

Lengths: 1ft, 3ft, 5ft, 7ft, 10ft, 14ft, 25ft, 50ft, 100ft.

502673 36″-63″ Tilt TV Mount Lockable

LCD & Plasma Flat Panel Tilt TV Mount for Screens sized 36″ to 63″

This tilt angle adjustable wall bracket is lockable and ideal for hotel rooms or public place installations. The wall mount supports most 36 to 63 inch mid size flat TVs up to 132 lbs weight. The back of the display sits 2.36 inch (60mm) off the wall when set straight up. Hardware is included for wood studs or concrete wall mounting..
Max Load Capacity: 132lbs (60kg).
Tilt angle: 5° up ~ 15° down.
Universal mounting pattern.
Design and construction: Solid toughened steel construction
Durable scratch resistant finish in black
Mounting hardware included
Easy & fast installation.

Note: Supported screen size is provided as a reference only. Please check bracket dimensions, and make sure overall braCket size does not exceed TV

502729 32″-55″ Fixed TV Mount

LCD & Plasma Flat Panel Fixed TV Mount for Screens sized 32″ to 55″

Sturdy steel construction provides solid and long-lasting performance.
High quality power-coated finish provides a stylish anti-scratch surface.
Open architecture allows for increased ventilation and easier access to wires.
Security screws provide added safety for TV.

This low profile wall bracket keeps TV 1.1 inch (20.5mm) close to the wall. This wall mount supports most 32 to 50 inch flat TVs up to 100 lbs weight. It is good for boardrooms, digital signage, or home theaters. Hardware is included for wood studs or concrete wall mounting.
Max Load Capacity: 77lbs.
Universal mounting pattern.
Design and construction: Solid toughened steel construction
Durable scratch-resistant finish in black
Mounting hardware included
Easy & fast installation.

Note: Supported screen size is provided as a reference only. Please check bracket dimensions, and make sure overall bracket size does not exceed TV.

502672 32″-50″ Tilt TV Mount Lockable

LCD & Plasma Flat Panel Tilt TV Mount for Screens sized 32″ to 50″

This tilt angle adjustable wall bracket is lockable and ideal for hotel rooms or public place installations. The wall mount supports most 32 to 50 inch mid size flat TVs up to 100 lbs weight. The back of the display sits 2.36 inch (60mm) off the wall when set straight up. Hardware is included for wood studs or concrete wall mounting.
Tilt angle: 5° up ~ 15° down.
Max Load Capacity: 100lbs (45kg).
Tilt angle: 5° up ~ 15° down.
Universal mounting pattern.
Easy & fast installation.

Note: Supported screen size is provided as a reference only. Please check bracket dimensions, and make sure overall braCket size does not exceed TV

HDMI-14 HDMI Splitter 1 in 4 out

HDMI-14 HDMI Splitter 1 in 4 out

4way HDMI splitter distributes the input of the HDMI signal into 4 outputs simultaneously. Each amplifier splitter’s output can achieve long distance transmission of HDMI signal up to 60Ft. It supports 3D and 4K x 2K high resolution HDMI.

Specifications
* 1-in / 4-out HDMI splitter
* HDMI version: High-Speed with 3D and 4K x2K support
* HDMI resolution: Up to 4K
* Output cable distance: <=60Ft without equalizer
* Power adapter : Input: AC (50HZ.60HZ) 100V-240V; Output: DC5V: (included)

HDMI Splitter 2 Port 1×2 v1.4

HDMI Splitter 2 Port 1×2 v1.4

2-port 4K HDMI^TM splitter lets you share two HDMI^TM displays or projectors with an HDMI^TM-enabled audio / video source device, such as a computer, Blu-ray player or cable TV set-top box.

One HDMI Input, two HDMI outputs
Supports Full 3D and 4Kx2K resolution
Supports 340MHz/34Gbps per channel (102Gbps all channel) bandwidth
Supports 12bit per channel (36bit all channel) deep color
Supports compressed audio such as DTS Digital, Dolby Digital (including DTS-HD and Dolby True HD)

HDMI to HDMI Micro Cables

Our durable and practical, HDMI to HDMI-Micro Male to Male cables will connect to home theater devices, DVD players, set-top boxes, projectors, gaming consoles, camcorders, switches, splitters and many other audio and video devices. This premium high performance HDMI to HDMI-Micro Male to Male supports high quality audio high-bandwidth, uncompressed video, has shielding and Gold connectors which prevents signal loss and screen ghosting for maximum video performance. This cable is compatible with all HDTV resolutions up to 1080p.

HDMI Male to Female Cables

HDMI Male To Female Cables

Our durable and practical, HDMI to HDMI Male to Female cables will connect to home theater devices, DVD players, set-top boxes, projectors, gaming consoles, switches, splitters and many other audio and video devices. This premium high performance HDMI to HDMI Male to Female supports high quality audio high-bandwidth, uncompressed video, has shielding and Gold connectors which prevents signal loss and screen ghosting for maximum video performance. This cable is compatible with all HDTV resolutions up to 1080p.

HDMI to HDMI-Mini Cable

HDMI to HDMI-Mini Cables

Our durable and practical, HDMI to HDMI-Mini cables will connect to home theater devices, DVD players, set-top boxes, projectors, gaming consoles, switches, splitters and many other audio and video devices. This premium high performance HDMI to HDMI-Mini cable supports high quality audio high-bandwidth, uncompressed video, has shielding and Gold connectors which prevents signal loss and screen ghosting for maximum video performance. This cable is compatible with all HDTV resolutions up to 1080p.

HHSW-110315 HDMI Switch 4×1 – IR Remote

HDMI Switch 4×1 -IR Remote

4Way (4-in/1-out) HDMI Switch with IR Remote

The 4×1 HDMI Switch routes HD video and digital audio from any one of the four sources to display. Four inputs accommodate the connections of 4 HD video sources simultaneously, such as cable box, game, PC, or Blueray players. The output sends the HD audio/video signals to a HD display. Switching is done by push button on the unit or via the IR remote that is provided with the unit.

This switch is equipped with IR Extension function. You can control source devices and HDMI switch box either at source device location or remote display location.

* 4 HDMI input, 1 HDMI output
* Switch by push button or remote (included)
* Full HD1080p 3D supported
* IR extension function, forward or backward
* Power: DC5V (power adapter included)
* Size: 4.4 x 3 x 1″

3 year warranty

Eclipse 300-167 Fiber Optic Crimp Tool

Eclipse 300-167 Fiber Optic Crimp Tool

The Pro’sKit Fiber Optic Crimp Tool Lunar Series is designed for use with FC,SC,ST,LC, SMA & MT-RJ fiber optic connectors

HEX .139”, .151”, .178”, ROUND .134”, .190”

Jonard Tools TK-160 Fiber Prep Kit with Connector Cleaners & Visual Fault Locator

Jonard Tools TK-160 Fiber Prep Kit with Connector Cleaners & Visual Fault Locator

Jonard Tools’ TK-160 fiber preparation kit, with Connector Cleaners (FCC-126, FCC-250) & Visual Fault Locator (VFL-150) provides you with all of the tools needed to access and prepare a fiber optic cable for termination.

The TK-160 Fiber Prep Kit includes:

CST-1900 Round Cable Stripper
CSR-1575 Cable Strip & Ring Tool
FOD-2000 Fiber Optic Drop Cable Slitter
MS-6 Mid Span Slitter for opening various types of fiber optic cables
JIC-375 3-hole fiber stripper
JIC-186 Kevlar cutter for prepping the fiber for termination
SD-61 multi bit screwdriver
FL-2000 LED flashlight
JIC-2288 diagonal cutter
JIC-842 long nose pliers
FW-5 fiber wipes
FCC-125 Fiber Connector Cleaner 1.25mm
FCC-250 Fiber Connector Cleaner 2.5mm
VFL-150 Visual Fault Locator Kit

All of these tools are provided in a rugged tool case with extra pockets for additional tools, connectors and many other items.

Jonard Tools FCC-125 Fiber Connector Cleaner 1.25mm

Jonard Tools FCC-125 Fiber Connector Cleaner 1.25mm

The Jonard Tools FCC-125 quick click ferrule end face cleaner is designed to provide exceptional cleaning performance by cleaning LC connectors beyond the critical fiber core area and cleaning deep into the contact area of a bulkhead adapter or connectors on fiber optic cables. The tethered dust cap provides protection for the micro fiber cleaning fabric and is an adapter for connector end face cleaning.

The FCC-125 features a patented 360 degree Rotational Tip for extra wide cleaning, easy one push operation and extendable nozzle, providing an additional 1.5 inches for a nozzle length of 4 inches to aid in accessing deep ports or crowded access panels. Additionally the FCC-125 uses a non-woven micro fiber that is lint free. The FCC-125 provides 800 cleanings and the outer body is made from static dissipative material for safe ESD work.

Jonard Tools patented cleaning technology features:

Slide-Guide™ non-slip micro tape feeder guarantees high reliability
Dual Rotational tip provides superior ferrule End face cleaning

Brother HSe-231 1/2″ Black on White Heat Shrink Tube Labels

Brother HSe-231 1/2″ Black on White Heat Shrink Tube Labels

11.7mm (0.46in) x 1.5m (4.9ft) Size Heat Shrink Tubing Black on White

HSe tube is a printable heat shrink tubing designed to mark cables, fiber and wires

Recommended for 3.6-7.0mm (0.14-0.28in) Outside Diameter

2:1 Shrink Ratio / 300V / 125°C (257°F) / VW-1

The Brother HSE231 Heat Shrink Tube can ONLY be used in the following Brother handheld label printers to mark cables, fiber and wires: PT-E300, PT-E500, PT-E550W