LED Globe 6W Vanity Lights, 3/pk

LED Globe 6W Vanity Lights, 3/pk

$18.75 for 3/pack

MaxLite LED G25 retrofit lamp is ideal for providing high-quality lighting for globe, vanity, and decorative fixtures throughout homes and hospitality applications. It consumes only 6 watts and replaces a 40-watt incandescent lamp, resulting in up to 85 percent savings in energy. This lamp has an average rated life of 25,000 hours and it is dimmable down to 10%.

• Lumens: 450

• 6 watts-replaces 40W bulb

• 2700k warm white

• 25,000 hour life (L70)

• CRI: 82

• Five year warranty

• Lasts 13 years

• Dimmable down to 10 percent

• Suitable for damp locations

• Not for use in enclosed fixtures

G25

3″

Platinum 100071BL EXO-EX Die™ Replacement Blade

Platinum 100071BL EXO-EX Die™ Replacement Blade

Replacement blade specifically for the EXO-EX Die™. A sharp blade assures your tool will neatly trim the wire from the ends of the connectors for crisp, clean crimps every time. Always have a spare on hand.

Replacing blade improves the performance of your termination
Compatible with EXO-EX Die™ only
Qty 2

Platinum 100071C EXO-EX Die™

Platinum 100071C EXO-EX Die™

The patented EXO-EX Die™ is used with the EXO Crimp Frame™ to terminate ezEX-RJ45™connectors (typically used in Cat6 and Cat6A). The EXO-EX Die is interchangeable and reversible when used with EXO Crimp Frame. Designed for the new ezEX-RJ45™connectors (ezEX™44 and ezEX™48). The ezEX-RJ45™ connectors are an RJ45 pass through connector, developed for larger cables and conductors. Integrated Hi-Lo stagger for improved performance and one piece design pass through system.

Single cycle crimp and flush trim
Easily interchangeable
Reversible for ambidextrous operation
Connectors lock into tool for correct positioning during crimp
Compatible with ezEX™44 and ezEX™48 connectors
Terminates larger cables and conductors Cat6 and Cat6A

Platinum 100062C EXO Crimp Frame™+ EZ-RJ45® Die

Platinum 100062C EXO Crimp Frame™ EZ-RJ45® Die

The patented EXO Crimp Frame EZ-RJ45® Die was designed for termination of EZ-RJ45® connectors. The included EZ-RJ45® Die is interchangeable and reversible when used with EXO Crimp Frame. Designed for the original pass through EZ-RJ45® connectors which are a standard in the industry. The EXO Crimp Frame highlights a push button lock, ergonomic TPR handles, and works with the EXO-EX Die™ (P/N 100071C) for terminating ezEX-RJ45™ connectors.

Single cycle crimp and flush trim
EZ-RJ45® Die is easily interchangeable
Reversible EZ-RJ45 Die for ambidextrous operation
Connectors lock into tool for correct positioning during crimp
Push button lock for easy storage
Ergonomic comfort grip TPR handles
Includes the EZ-RJ45® Die for crimping EZ-RJ45®

EXO Crimp Frame works with EXO-EX™ Die for crimping ezEX-RJ45™ connectors

Platinum 100061C EXO Crimp Frame™ with EXO-EX Die

The patented EXO Crimp Frame™ EXO-EX Die™ was developed to terminate larger cables and conductors (typically Cat6/6A). EXO Crimp Frame™ EXO-EX Die™ is designed for the ezEX-RJ45™ connectors. The ezEX-RJ45™ connectors are an RJ45 pass through connector, developed for larger cables and conductors. Integrated Hi-Lo stagger for improved performance, one piece design pass through system. The EXO Crimp Frame has a patented push button lock, ergonomic TPR handles and works with the EZ-RJ45® Die for terminating EZ-RJ45® connectors.

Single cycle crimp and flush trim
EXO Die™ is easily interchangeable
Reversible EXO Die™ for ambidextrous operation
Connectors lock into tool for correct positioning during crimp
Push button lock for easy storage
Ergonomic comfort grip TPR handles
Includes EXO-EX Die™ for crimping ezEX™44 and ezEX™48 connectors
Terminates larger cables and conducts Cat6 and Cat6A

EXO Crimp Frame works with EZ-RJ45® Die for crimping EZ-RJ45® connectors.

Insulation Diameter (Conductor) size range: 0.039” to 0.048”

Max Outer Diameter: .290” (7.36mm)

X3 Hurricane Variable Speed Canless Airsystem 260+ MPH

X3 Hurricane Variable Speed Canless Airsystem 260 MPH

This is our strongest and quietest unit ever! The variable speed trigger allows you to use as little or as much power as necessary which also allows you to control the noise level. It is perfect for the strongest job but also allows you to work quietly in a busy office or retail environment.
This unit is equal to over 5,000 cans of traditional duster.
Designed for corporate and IT department use, if you use a lot of canned air and want the most power possible you need this unit.
Great for cleaning large computers, server rooms, camera lenses and mirrors, high-end medical equipment, displays in retail stores, complex circuit boards and so much more.
2 Year Warranty.
Rated for outlets 110-240v.

Hurricane Vs Canned Air
- NO CHEMICALS!
- No greenhouse gasses!
- If inhaled you would only be inhaling the same air you breathe.
- No fear of inhalant abuse.
- No proof of age needed to purchase.
- No secured inventory issues for retailers.
- Can be used continually for over 15 minutes and will never freeze-up or cause frostbite.
- Can be used at any angle.
- No flash fires resulting in severe burns caused from chemicals – CHEMICAL FREE!
- Will not explode in any temperature.
- The O2 Hurricane does not produce any pollution.
- No chemical residue danger to sensitive electronics.
- Uses limited only by your imagination.
- CA404-1807-VS

Klein Tools 44217 Electrician’s Pocket Knife with #2 Phillips

Klein Tools 44217 Electrician’s Pocket Knife with #2 Phillips

The Klein Tools 44217 Electrician’s knife: it’s a stripper and a driver too. This knife has three wire stripping notches on the back of the full-sized, stainless steel drop point blade, as well as featuring a handy No. 2 Phillips screwdriver smartly tucked into the handle. Klein Tools pocket knives are high quality, easy to carry and durable with long-lasting, sharp blades. The Electrician’s Pocket Knife is three tools in one, saving multiple trips to the tool bag.

Features:

Full sized, fine edge drop point blade made of 440A stainless steel
Three wire stripping notches on the back of the blade (sizes: 10 SLD/12 STR, 12 SLD/14 STR and 14 SLD/ 16 STR)
No. 2 Phillips driver, the most versatile size
Liner locking blade secures the blade when open
Screwdriver is liner locking and folds smartly into the handle
Rugged aluminum handle
Pocket clip for easy storage

Hakko FR-410 140W High Power Desoldering Station

Hakko FR-410 140W High Power Desoldering Station

Free Shipping on orders over $100!

Replaces Hakko 472D

The HAKKO FR‐410 Desoldering Station is designed to fit that need and bridge the gap in power between the 70W HAKKO FM‐204 Desoldering Station, and the 300W HAKKO FR‐400 Ultra Heavy Duty Desoldering Station.

The HAKKO FR‐410 provides 140W of power and has the widest selection of nozzle configurations that can meet almost every need. The station also includes the same popular features from the HAKKO FR‐400 which include an anti‐clogging feature which helps ensure instantaneous application of peak vacuum pressure to the solder joint, a delay timer to prevent premature release of the vacuum system before solder has cleared the heater and is captured in the solder collection chamber, a large, easy to read display that includes a vacuum level indicator to let you know if there are restrictions building that will need to be cleaned out, 3 user programmable presets, and process control password lockout to prevent any unauthorized changes to the systems operation or setup.

Rip-Tie Lite Y-08-900 1/2″ x 8″ Roll of 900

Black, brown, blue, green, grey, orange, red, violet, white, yellow, rainbow (10 colors)

Ideal for bundling & organizing computer and network cables.

1/2″w x 8″l
At least 200 re-fastenings.
Rip-Tie Lite is made of one piece of double-sided hook and loop fastener. It has a die-cut slot for attachment to a single cable.
10 Colors
Rip-Tie Lite is perfect for use on equipment, home theatre and audio systems, tools, appliances and more.
Max bundle diameter: 1.75″

Platinum Tools RJ45 CAT6A 10Gig Shielded Connector with Liner Solid

Platinum Tools 106190 RJ45 CAT6A 10Gig Shielded Connector 100 pack

Platinum Tools RJ45 CAT6A 10Gig Shielded Connector with Liner Solid

106190 100/Bulk

106191 25/Bag

106192 50/Bag

106192C 50/pk

106193C 10/pk

Streaming media whether data, audio or video, is on a sharp rise and users are demanding more bandwidth. That means bigger cable, commonly referred to as CAT6e, CAT6A and CAT7, and usually shielded. For maximum performance, connector and crimp tool choice is critical. Our CAT6A/10Gig termination system not only meets, but exceeds these requirements.
Connector is only compatible with our Tele-TitanXg™ and Tele-TitanXg™ 2.0 Crimp Tool. Please see related products.
- Max cable OD: 8.5mm/0.335″
- Max conductor OD: 1.35mm/0.053″
- Individual conductor OD range: 0.042” – 0.053” (1.07mm-1.35mm)
- Wire gauge range (AWG) 24—22
- Designed for both shielded and unshielded cabling
- 50µ Gold Contacts
- UL and RoHS compliant

Video Balun Passive Transceiver BNC to RJ45 / Terminal

Video Balun Passive Transceivers allow for full-motion CCTV video at distances, b/w up to 2000′ (600m), color up to 1300ft (400m)
Outstanding interference rejection and transient protection
No power required

2 versions: RJ45 and Terminal screw.

1 Channel passive video transceiver.
Receiving and transmitting video signals over Cat5e
DC Loop Resistance 52 ohms per 1,000 ft(18 ohms per 100m)
Built-in transient protection design
Enable cost-effective, point to point transmission appliance
Easy Installation
Sold individually

Nebo WLT-0003 SLYDE KING Rechargeable Flashlight Work Light

Nebo WLT-0003 SLYDE KING Rechargeable Flashlight Work Light

Call for discount price! 702-733-0024 press 2 for counter sales

The Amazing Rechargeable Work Light and Flashlight!

With all the features that you would expect from a SLYDE…and more! The 2nd generation SLYDE^™ KING is equipped with programmable memory settings for each light mode, a new C•O•B red light function, a 4x adjustable zoom and best of all…it’s rechargeable!

LIGHT
• High-power 500 lumen LED flashlight
• High-power 500 lumen C•O•B work light
• High-power 40 lumen red light
• High-power red hazard flasher

DESIGN
• Fully rechargeable
• Memory power setting
• Convex lens
• Tactical edge
• 4x adjustable zoom
• Anodized aircraft-grade aluminum;
water and impact-resistant
• Dimmable beam
• Work light is concealed inside the flashlight body
• Powerful magnetic base

OPERATION
• Side-positioned ON/OFF button
• C•O•B Work light automatically turns ON when opened and OFF when closed

BATTERIES
• Powered by 1 Li-ion rechargeable battery included
(3-4 hour recharge time)

ACCESSORIES
• Micro USB to USB cable included

SPECS
• 0.8 lbs.
• Length: Compacted: 6.875” / Extended: 9”
• Diameter: (Head) 1.75” / (Barrel) 1.25”

6726

Klein IR5 Dual Laser IR Thermometer

Klein IR5 Dual Laser IR Thermometer

Klein® Tools 12:1 Dual-Laser Infrared Thermometer provides better visualization and more accurate performance.

The IR5 features dual-lasers that use a tight 12:1 distance-to-spot ratio for accurate measuring of temperatures between -22°F and 752°F. It also offers several calculation modes for a wide range of temperature measurement applications.

Dual-laser targeting technology makes it easier to visualize the area being measured by an IR thermometer, resulting in more accurate measurement performance versus a single laser.

The IR5 is compact with a soft-touch, overmolded housing for comfort, and can withstand drops of more than six feet onto concrete or steel.

Optical Resolution (Distance-to-spot) is 12:1.
Features include dual-laser targeting; auto-scan; max/min/avg/diff; high/low alarm; backlit display; auto power-off.
Drop protection to 6.6 ft. (2 m).
Measurement Range: -22° to 752°F (-30° to 400°C)
Uses one 9-volt battery, with battery life expectancy at 10 hours of continuous use with laser and backlight on.
Includes custom pouch and batteries.
Certified to IEC EN 61326-1:2006, EN608251:1994 A2:2001 A1:2002.
Adjustable emissivity
Soft-touch, overmold housing

Klein Tools 32581 4-in-1 Electronics Screwdriver

Klein Tools 32581 4-in-1 Electronics Screwdriver

Featuring 4 Different Bits in One Miniature Tool!

Four different bits in one tool!

Includes #0 and #00 Phillips plus 1/8”and 3/32” Slotted tips

Rotating cap for optimum and precise control

Cushion-Grip handles for maximum comfort when working on small equipment

Heat-treated precision ground tip for greater strength

The new 4-in-1 Electronics Screwdriver features four different bits in one tool. Designed for precision work, this multi-purpose tool features a rotating cap for optimum control when working on small equipment.

Made of the highest quality tempered steel, carefully heat-treated for maximum strength and precision machined to fit screw openings securely. Cushion-Grip handles offer outstanding comfort.

Includes #0 and #00 Phillips plus 1/16”and 3/32” Slotted

Jonard Tools TK-400 Splicer’s Kit

Jonard Tools TK-400 Splicer’s Kit

This compact kit contains a special purpose ergonomic cable splicer’s knife, scissor and leather pouch. The knife features a short 1 3/4″ tough, cutlery-steel blade and a non-slip handle. The scissors are made of chrome vanadium steel with scraper and file on one sides plus 2 stripping notches. Both items fit securely in the leather pouch which can be mounted on belts up to 2″ wide.

Skinning Notch

18-20 AWG, 22-24 AWG

Handle Type

Chrome Vanadium Steel Loop, Thermal Plastic Rubber

Jonard Tools TK-375 Fiber Stripper & Scissor Kit

Jonard Tools TK-375 Fiber Stripper & Scissor Kit

Three Piece Fiber Optic Kit includes the JIC-375 Fiber Optic Stripper, ES-1964 Electrician’s Scissor, and convenient molded plastic pouch (with metal clip).

Jonard Tools FOD-2000 Fiber Optic Drop Cable Slitter

Jonard Tools FOD-2000 Fiber Optic Drop Cable Slitter

The FOD-2000 Fiber Optic Drop Cable Slitter is a patented tool that simplifies the slitting of drop cable jackets at the end of the cable or mid-span and was developed specifically for FTTH technicians working with flat fiber drop cables. For flat cables, where the width is .305″-.350″ and the height is .155″-.185″. These are the dimensions of a typical Corning SST-Drop flat cable with a jacket thickness of 0.03-0.04 inches. The tool will work on other cables with similar dimensions.

The FOD-2000 puts a slit on both sides of the jacket allowing easy access to the fiber or strength member. The ease of use makes this tool truly unique! To use just position the tool around the cable, pull and slit. A simple twist of the cable allows the jacket and strength members to separate from the buffer tube leaving the fiber undamaged.

Designed for .250″ flat drop cables. The FOD-2000 comes completely assembled with two blades, which can be reversed once the blades are worn. Replacement blades are also available under part number FOD-RB25 for a package of 25 blades.

Jonard Tools CSR-1575 Cable Strip & Ring Tool

Jonard Tools CSR-1575 Cable Strip & Ring Tool

The CSR-1575 is designed to slit and ring cables, buffer tubes and jackets on fiber optic cables up to 7.5mm (0.3″) in diameter. The tool features an easily adjustable slit blade and ring blade as well as a removable and reversible V block that improves slitting performance and accommodates smaller to larger diameter cables.

Simple to use:

Ringing a cable: Ring blade is easily adjustable using the adjustment knob. Rotate the knob toward the ” ” sign to increase cutting blade depth and rotate the knob toward the “-” sign to decrease cutting depth. Once depth is determined, open jaw, insert cable, rotate tool around cable 3 times, open jaw and remove cable, pull off jacket.
Slitting a cable: First select which V groove is needed on the V block, we recommend using the small V groove for cables 3mm or smaller and use the large V groove for cable larger than 3mm. To remove V block simply push on the V block, remove from tool.
Select groove then push V block back into tool. Set the depth of the slitting blade by loosening the screw holding the blade in place, use the tab on the blade to move the blade up or down to the desired slitting depth, tighten screw. Open jaw, insert cable to be slit, close jaw and pull.

LED Globe 6W Vanity Lights, 3/pk