JT&T 2653-1J Red LED Toggle Switch, SPST 15A, 12V, On/Off, .250 Tabs

Fits 1/2” hole. • Fits 2650E & 2950F Panel Mounts

JT&T 2659F Toggle Weatherproof Switch Boot Fits Standard 1/2″ Switch Stem

Fits standard 1/2″ – 3/4″ stems. Weatherproof switch boot provides dust and moisture protection. Installs over toggle stem and threads on to switch body.

JT&T 2670F 15 AMP @ 12 Volt S.P.S.T. Push-Pull Switch, Red

15 AMP @ 12 Volt – S.P.S.T., Push-Pull Switch, Red

JT&T 2806F 2-Wire GM Mixture Control Solenoid (MCS) Connector Pigtail

For 2 & 4 Barrel Rochester Varajet Carburetors.
(2) 18AWG Leads & Weather-Pack Seal.
Fits GM Solenoid Kits #17067343, 17067344 & 17111102.
Replaces GM #88860472.
Replaces AC/Delco #PT1917.

JT&T 2855-1F Double Cavity Male w/ 14 AWG 10″ pigtail

Mates with 2851-1

JT&T 2865F Single Cavity M & F w/ 14 AWG 10″ pigtails

Weather Pack Pigtail Assemblies
14 AWG GXL White Insulated Wire – (2) 10” Leads

JT&T 2866F Double Cavity M & F w/ 14 AWG 10″ pigtails

Weather Pack Pigtail Assemblies
14 AWG GXL White Insulated Wire – (2) 10” Leads

JT&T 2965F 15 AMP @ 12 Volt S.P.S.T. Illuminated Push-Pull Switch, Green

Green, On/Off, 2 terminals, .250 tabs

JT&T 2966F 15 AMP @ 12 Volt S.P.S.T. Illuminated Push-Pull Switch, Blue

Blue, On/Off, 2 terminals, .250 tabs

JT&T 4272F 3/8″ Asphalt-Coated Fabric Loom, 10 ft

JT&T Asphalt-Coated Fabric loom is a flame-retardant, non-metallic flexible conduit woven from the highest grade yarns & fibers. Standard products are a blend of cotton/poly fiber, PET monofilament & an asphaltic resin. Meets MIL-Spec, SAE-Spec, Ford, Chrysler & General Motor Specifications. Military Specs: HH-T-791 A,B,C. SAE Spec: SAE-J562A. Ford Specs: ESB-M3L38-A, ESF-M3L45-A, ESB-M99H96. Chrysler Specs: MS-542, MSJZ9-31. GM Specs: GM-675, 676, 677, 678-M, Packard Electric Speck: PM451. Fabric Loom is available in additional sizes & in additional colors by special order. Woven loom is typically shock absorbent, completely flexible, dimensionally stable & sound absorbent. Woven loom is often used in wire harnesses, fuel and vacuum lines, battery cables, oil indicators, control rods, EGR tubes and mold ducts. Specifically it has been used to protect truck battery cables during engine installation, prevent damage to starter cables during engine installation, prevent damage to wiring where exposed to sheet metal, protect copper air brake lines from stone damage & protect jumper wires between tractors & trailers. It is coated with a special flame-retardant, black bituminous coating & is ideal for harsh environments. Available in additional sizes, formulations & in additional colors by special order. Temperature rating from -40°C (-40°F) to 135°C (275°F)

Meets requirements of SAE-J562A & HH-T-791 A,B,C.
Meets Ford, Chrysler, GM & Packard Electric Specifications (see above).
Continuous Operating Temperature: -40C (-40F) to 135C (275F).
Maximum Temperature: 176C (350F).
Flame-Retardant Coating: Yes.
Material: Asphalt-Coated Fabric Loom.
Longer lengths may not be a continuous piece, and may be spliced

JT&T 4273F 1/2″ Asphalt-Coated Fabric Loom, 10 ft

JT&T 4404C 1/2″ Grommets

1/2″ Grommets feature a 3/8″ ID, 1/2″ hole diameter, and 1/16″ groove.

Grommets are inexpensive, flexible, oil resistant and have high dielectric strength with outstanding aging qualities.

See Specifications tab for measurements.

JT&T 4408H 1″ Grommets

1″ Grommets feature a 11/16″ ID, 1″ hole diameter, and 1/16″ groove.

Grommets are inexpensive, flexible, oil resistant and have high dielectric strength with outstanding aging qualities.

See Specifications tab for measurements.

JT&T 4450H Assorted Grommets with 1/4″, 5/16″, 3/8″ Mounting Holes, Black

1/4″ Grommets x 5, 5/16″ Grommets x 4, 3/8″ Grommets x 4

JT&T rubber grommets are inexpensive, flexible, oil resistant and have high dielectric strength with outstanding aging qualities.

See Specifications tab for measurements.

JT&T 4495F Insulated Cable Clamps, 7/8, 1, 1-1/4, & 1-1/2″, 2 Each

JT&T’s Rubber Insulated Clamps are made with cold rolled steel and have a 1/4″ mounting hole. Attributes include soft-touch, durability, resistance to heat and various fluids. Rubber is an excellent insulator for electrical installation and provides a consistant thickness throughout.

JT&T 4653H-0 Nylon Clamp Assortment – Black

Open Inner Diameters: 0.75”, 1”, & 1.125”. Black. Mounting Hole 13/64”

JT&T 4790F 650pc Wire Tie Kit

4701 4” 18Lb. Natural Wire Ties 200
4702 4” 18Lb. UV Black Wire Ties 100
4701-7 4” 18Lb. Yellow Wire Ties 20
4701-6 4” 18Lb. Blue Wire Ties 20
4701N5 4” 18Lb. Neon Green Wire Ties 20
4701N8 4” 18Lb. Neon Pink Wire Ties 20
4701N3 4” 18Lb. Neon Orange Wire Ties 20
4705 7.5” 50Lb. Natural Wire Ties 100
4706 7.5” 50Lb. UV Black Wire Ties 10
4705-2 7.5” 50Lb. Red Wire Ties 10
4705-7 7.5” 50Lb. Yellow Wire Ties 10
4705-6 7.5” 50Lb. Blue Wire Ties 10
4705-4 7.5” 50Lb. Purple Wire Ties 10
4707 11.5” 50Lb. Natural Wire Ties 100

JT&T 4794F 1,200pc Wire Tie Kit

4701 4” 18Lb. Natural Wire Ties 100
4702 4” 18Lb. UV Black Wire Ties 200
4701-6 4” 18Lb. Blue Wire Ties 100
4701-4 4” 18Lb. Purple Wire Ties 100
4701N5 4” 18Lb. Neon Green Wire Ties 100
4701N7 4” 18Lb. Neon Yellow Wire Ties 100
4701N3 4” 18Lb. Neon Orange Wire Ties 100
4703 5.5” 40Lb. Natural Wire Ties 100
4704 5.5” 40Lb. UV Black Wire Ties 200
4706 7.5” 50Lb. UV Black Wire Ties 100
304705-1 7.5” 250Lb. Stainless Steel Wire Ties 2