NTE 54-545 SWITCH ROUND HOLE ROCKER SPDT ON-NONE-Momentary (ON) 16A
NTE 54-545 SWITCH ROUND HOLE ROCKER SPDT ON-NONE-Momentary (ON) 16A
SWITCH ROUND HOLE ROCKER SPDT ON-NONE-(ON) 16A 125VAC W/LEGEND .185 TAB TERMINALS View Specs
SWITCH ROUND HOLE ROCKER SPDT ON-NONE-(ON) 16A 125VAC W/LEGEND .185 TAB TERMINALS View Specs
3/64”, 1/16”, 3/32”, 1/8”, 3/16”, 1/4”, 3/8”, 1/2″, 3/4″, 1”, 1-1/2”, 2”
Color: White
Our heat shrink is a flexible polyolefin tubing that offers an outstanding balance of electrical, physical and chemical properties for a wide variety of industrial and military applications. Our tubing is typically used as shrink-fit electrical insulation over cable splices and terminations. It is also used for lightweight wire harness covering, wire marking, wire bundling, component packaging and fire resistant covering.
NTE Heatshrink Tubing Technical Brochure
HEATSHRINK
1-11 | $24.92 | |
12-49 | $21.36 | |
50-99 | $19.93 |
Contact us for quantity pricing over 100 pcs.
Terminals: • F1/0
Nominal Voltage ………………………………………………………………12 volts (6 cells)
Nominal Capacity
20-hr. (100mA to 10.50 volts) ……………………………………………….. 2.00 AH
10-hr. (190mA to 10.50 volts) ………………………………………………. 1.90 AH
5-hr. (340mA to 10.20 volts) ………………………………………………. 1.70 AH
1-hr. (1.24A to 9.00 volts) ……………………………………………………. 1.24 AH
15-min. (3.33A to 9.00 volts) ……………………………………………………..0.83 AH
Approximate Weight ………………………………………………….. 1.50 lbs. (0.68 kg)
Energy Density (20-hr. rate) ………………………….. 1.44 W-h/in3 (88.00 W-h/l)
Specifi c Energy (20-hr. rate) ………………………… 16.00 W-h/lb (35.27 W-h/kg)
Internal Resistance (approx.) ……………………………………………… 80 milliohms
Max Discharge Current (7 Min.) ………………………………………….. 6.0 amperes
Max Short-Duration Discharge Current (10 Sec.) ……………… 20.0 amperes
Shelf Life (% of nominal capacity at 68°F (20°C))
1 Month ………………………………………………………………………………………… 97%
3 Months ……………………………………………………………………………………….. 91%
6 Months ………………………………………………………………………………………. 83%
Operating Temperature Range
Charge .. ………………………………………………….. -4°F (-20°C) to 122°F (50°C)
Discharge ……………………………………………….-40°F (-40°C) to 140°F (60°C)
Case …………………………………………………………………………………………ABS Plastic
Power-Sonic Chargers …………………………………………………………. PSC-12300A
Batteries do not qualify for free freight promotion
Replaces obsolete PA1441
Upgraded existing crimpers with dual-durometer ProGrips and internal improvements for greater reliability and precision.Adjustable Pin Height Locator.
26-20 AWG (.14-.50mm2)
154 Pieces of All Black Heat Shrink Assortment of sizes
A flexible, polyolefin based heat shrinkable tubing rated for continuous operation from 55°C to 135°C and up to 300°C for short durations
1-11 | $116.37 | |
12-49 | $99.74 | |
50-99 | $93.09 |
Contact us for quantity pricing over 100 pcs.
Universal Terminals: Heavy Duty Posts with Nut & Bolt Fasteners
Nominal Voltage ………………………………………………………………12 volts (6 cells)
Nominal Capacity
20-hr. (2.75A to 10.50 volts) …………………………………………………. 55.0 AH
10-hr. (5.1A to 10.50 volts) ……………………………………………………. 51.0 AH
5-hr. (8.8A to 10.20 volts) …………………………………………………… 44.0 AH
1-hr. (30.6A to 9.00 volts) …………………………………………………… 30.6 AH
15-min. (96A to 9.00 volts) …………………………………………………………24.0 AH
Approximate Weight ………………………………………………… 36.0 lbs. (16.33 kg)
Energy Density (20-hr. rate) ………………………… 1.64 W-h/in3 (100.30 W-h/l)
Specifi c Energy (20-hr. rate) ………………………… 17.65 W-h/lb (38.91 W-h/kg)
Internal Resistance (approx.) ……………………………………………….. 7 milliohms
Max Discharge Current (7 Min.) ……………………………………… 165.0 amperes
Max Short-Duration Discharge Current (10 Sec.) ……………. 410.0 amperes
Shelf Life (% of nominal capacity at 68°F (20°C))
1 Month ………………………………………………………………………………………… 97%
3 Months ……………………………………………………………………………………….. 91%
6 Months ………………………………………………………………………………………. 83%
Operating Temperature Range
Charge .. ………………………………………………….. -4°F (-20°C) to 122°F (50°C)
Discharge ……………………………………………….-40°F (-40°C) to 140°F (60°C)
Case …………………………………………………………………………………………ABS Plastic
Power-Sonic Chargers ……………………………………………………PSC-1210000A-C
Batteries do not qualify for free freight promotion
MINIMUM ORDER: 20 PIECES
Manufactured in Kiesub Electronics’ Contract Manufacturing division right here in Las Vegas.
Energy-efficient LED technology brightens machines-uses less power-saves money! Disperses LED light evenly and makes graphics glow. Refreshes the look of your machines with super-bright LED lighting. Much brighter than fluorescent or incandescent lamps.
Mounts in existing brackets in just seconds with no modifications. Bypass ballast and plug into existing harness. Operates from 24vdc of the machine.
20-1/2″w x 9-1/2″h
FREE UPS GROUND SHIPPING
You can measure around awkward sized conductors with the Fluke 376 FC True RMS Clamp Meter with iFlex®, expanding your measurement range to 2500 A ac. With True RMS voltage and current measurements, the Fluke 376 can read up to 1000 V and 1000 A in both ac and dc modes.The Fluke 376 FC is the direct replacement for the Fluke 376 Clamp Meter.
Features:
374 FC/375 FC/376 FC Users Manual
Battery | Two (2) AAA alkaline batteries |
Bulb | C4 LED technology, impervious to shock with a 30,000 hour lifetime. |
Material | Corrosion & water resistant, machined aircraft-grade aluminum alloy, Type II MIL-Spec anodize plating. |
Color | Black |
Weight (with batteries) | 1.64 ounces |
Dimensions | .6″ (Dia.) x 5.3″ (L) |
Run Time | 6 hours, 15 minutes hours |
Power | 48 lumens |
Special Features | C4 ®LED technology for extreme brightness, IPX4 rated for water resistant operation. All openings o-ring sealed.1 meter impact resistance tested. Removable pocket clip. |
Streamlight Nano Light LED Key Chain Light
ESD Grounding Wrist Strap, 6′
Hosa GPM-179 1/8-inch TRS to 1/4-inch TS Adapter is designed to adapt a mini stereo phone plug to a mono phone output. It applies mono equally to stereo left and right.
DeoxIT® Fader F-Series – Moving Contact Lubricant for Conductive Plastic Faders and Controls
Part No. F5S-H6 Spray:
Using Adjustable Low-Med-High Valve
Applicator: Spray, provides flushing action, briefly flammable (until solvent evaporates within 2-3 minutes).
Formulation: 5% DeoxIT® Fader (active ingredient), 75% odorless mineral spirits (carrier solvent), 20% propellant
Use: Solvent is slower to evaporate, providing flushing action to remove surfaces dirt, grease and other contaminants. Is ideal for connectors and components removed from equipment or those that are easily accessible.
Notes: Use when over spray not an issue. Formulation safe on plastics. Always recommend testing for compatibility, especially on critical/sensitive parts, and vintage equipment with aging ABS plastic(s). On rubber, may swell until solvent evaporates. For quick-dry, non-drip spray, we recommend Part No. FN5S-2N. Need more tactile feel, use the DeoxIT® Fader Grease after cleaning with DeoxIT® Fader F-Series.
Metal and/or Plastic: Not sure if faders have plastic and/or metal components, we recommend using DeoxIT D-Series, Part No. D100S-2 (100% DeoxIT spray).
INFO: Using DeoxIT® Sprays, Cautions, Warnings and Best Practices (caig.com/d-sprays).
DeoxIT® Fader F-Series is a precision lubricant and treatment for moving contact surfaces (faders, switches, potentiometers and other mechanisms with sliding surfaces). It replenishes lubrication lost on surfaces that have been cleaned with solvents or other cleaning solutions.
Over time these conductive plastic components lose their original lubrication from wear and/or repeated cleaning. Dust, dirt, drink spills and other contamination also degrade the components’ lubricant. The need for re-lubrication is necessary to avoid excess wear and abrasion to the plastic surfaces. Another use for DeoxIT® Fader is on conductive membrane switches and components. Oil, grease and acids build up on the membrane surfaces due to repeated finger contact and can lead to device malfunction. Applying DeoxIT® Fader will provide a long-lasting barrier against these types of contamination. The oil, grease and acids will be displaced above the DeoxIT® Fader layer preventing contact with the plastic membrane.
For reference, DeoxIT® Fader F-Series has approximately 1% cleaning action.
C02018 Duster with THREE 16 gram carbon dioxide cartridges
A high velocity, residue free stream of gas, perfect for cleaning cameras, camcorders, electronics, musical instruments, sewing machines, electric razors, smoke detectors and much more. Additionally, carbon dioxide gas will not break down delicate lubricants, inks and dyes.
If you currently use an aerosol duster, you may have heard it referred to as “canned air”. However you should know there is no such thing as “CANNED AIR”. All you have to do is read the warning label on traditional aerosol dusters to see they contain chemicals that emit harmful and potentially toxic or flammable vapors. Not only are you exposing yourself to these dangerous chemicals, but your family, pets or co-workers as well. In addition, these chemicals can leave a residue that adversely effect delicate materials and sensitive equipment! There is an alternative to harmful aerosols and that is carbon dioxide gas. Carbon dioxide is a pure gas that exists naturally in Earth’s atmosphere, so it is not dangerous to human health. In fact, carbon dioxide gas is part of the Earth’s “Cycle of Life” – plants absorb carbon dioxide as food and produce oxygen as waste, which humans and animals then breathe. It is also an environmentally friendly gas that demands much less energy to produce than synthetic aerosols chemicals. Carbon dioxide gas is totally safe to use on all types of electronics, musical instruments, electric razors, sewing machines, smoke detectors, lab equipment, forensics, tablets and phones. Additionally delicate lubricants, inks, toner, fabric, dyes will not be adversely effected by carbon dioxide gas. And unlike aerosol cans that can only be partially recycled, the CO2’s empty steel cartridges are 100% recyclable. The CO2 is our smallest unit, perfect for travel and working in tight areas. This model includes a precision valve and nozzle with 3 each – 16 gram carbon dioxide cartridges.
IMPORTANT NOTE: Liquefied gas under pressure will naturally produce a “cold effect” when discharged. Unlike large aerosol canisters, the CO2 is a very tiny unit and does not have the same surface area to dissipate the cold as as large units, so it is important to follow the CO2’s operating instructions; DO NOT FULLY DEPRESS THE TRIGGER. ONLY USE QUICK, SHORT BURSTS. By doing so you will reduce the “cold effect” and keep the output pressure as high as possible.
Click here for replacement cartridges: CO-42104 16gram cartridges, 3/pk
In-store pickup or local delivery only.
16oz. Contact Cleaner, Aerosol. This innovative solvent blend of Honeywell’s HFC-245fa and 1,2-trans-dichloroethylene is a direct replacement for solvents containing HCFC-141b. Designed for removing oils, greases, silicones, dirt, and grim from switches, relays, contact pads, and other electrical connections. Non-ozone depleting. Non-flammable. Safe on most plastics. Rapidly evaporating.
Energizer® Alkaline batteries are available in a wide variety of sizes to fit most applications and operate well in extreme temperatures, and they can be stored for a up to 7 years before use.
Classification: Alkaline
Chemical System: Zinc-Manganese Dioxide (Zn/MnO 2)
Designation: ANSI-1604A, IEC-6LR61
Nominal Voltage: 9.0 volts
Operating Temp: -18°C to 55°C (0°F to 130°F)
Typical Weight: 45.6 grams (1.6 oz.)
Typical Volume: 21.1 cubic centimeters (1.3 cubic inch)
Jacket: Metal
Shelf Life: 5 years at 21°C
Terminal: Miniature Snap
Price per box of 12
$1.59 each x box of 12 = $19.08
Batteries are excluded from free shipping.
Our battery pricing is extremely competitive for bulk purchases. Call for quantity pricing & special shipping rates.
1-11 | $16.58 | |
12-49 | $14.21 | |
50-99 | $13.27 |
Contact us for quantity pricing over 100 pcs.
TERMINALS: “F2″ Quick Disconnect Tabs (0.250″x0.032”)
Length | 5.95 inches | 151 millimeters |
Width | 2.00 inches | 51 millimeters |
Height | 3.70 inches | 94 millimeters |
Height over Terminals | 3.86 inches | 98 millimeters |
Approximate Weight | 4.40 pounds | 2.00 kilograms |
Nom Cap: 20 hour rate | (600mA to 5.25 volts) | 12.0 AH |
Nom Cap: 10 hour rate | (1.15A to 5.25 volts) | 11.5 AH |
Nom Cap: 5 hour rate | (2.10A to 5.10 volts) | 10.5 AH |
Nom Cap: 1 hour rate | (7.3A to 4.50 volts) | 9.0 AH |
Batteries do not qualify for free freight promotion
1-11 | $29.92 | |
12-49 | $25.64 | |
50-99 | $23.93 |
Contact us for quantity pricing over 100 pcs.
TERMINALS: “F2″: Quick disconnect tabs (0.250″ x 0.032”) mate with AMP. INC. FASTON “250”
Nominal Voltage ………………………………………………………………12 volts (6 cells)
Nominal Capacity
20-hr. (600mA to 10.50 volts) ………………………………………………. 12.0 AH
10-hr. (1.1A to 10.50 volts) …………………………………………………… 11.0 AH
5-hr. (2.1A to 10.20 volts) …………………………………………………… 10.5 AH
1-hr. (7.25A to 9.00 volts) ……………………………………………………. 7.25 AH
15-min. (21.5A to 9.00 volts) ……………………………………………………..5.38 AH
Approximate Weight ………………………………………………….. 7.92 lbs. (3.59 kg)
Energy Density (20-hr. rate) …………………………. 1.69 W-h/in3 (103.41 W-h/l)
Specifi c Energy (20-hr. rate) ………………………… 18.18 W-h/lb (40.08 W-h/kg)
Internal Resistance (approx.) ……………………………………………… 20 milliohms
Max Discharge Current (7 Min.) ……………………………………….. 36.0 amperes
Max Short-Duration Discharge Current (10 Sec.) ……………. 120.0 amperes
Shelf Life (% of nominal capacity at 68°F (20°C))
1 Month ………………………………………………………………………………………… 97%
3 Months ……………………………………………………………………………………….. 91%
6 Months ………………………………………………………………………………………. 83%
Operating Temperature Range
Charge .. ………………………………………………….. -4°F (-20°C) to 122°F (50°C)
Discharge ……………………………………………….-40°F (-40°C) to 140°F (60°C)
Case …………………………………………………………………………………………ABS Plastic
Power-Sonic Chargers ……………………………………. PSC-122000A, 122000A-C
Batteries do not qualify for free freight promotion