Klein Tools VDV327-103 Wire Pick

Klein Tools’ voice/data/video wire pick enables manipulation of wires at busy blocks and panels. Grab wires or clean out debris in confined spaces with ease. No more messy blocks or panels.

Pick wire and insulation debris left in terminals
Pull, manipulate or trace wires
Pull bridge clips from 66 blocks
Push wires into position
Pry open covers
Non-conductive body material prevents shorts when pulling wire
Includes a metal hook end and non-conductive spudger end
See our Cushion-Grip Impact Punchdown Tool Kit (VDV427-822) for everything required to install and maintain 110 and 66 panels, cross-connect systems and wall jacks

Klein Tools VDV226-107 Ratcheting Data Cable Crimper / Stripper / Cutter

The Compact Ratcheting Modular Crimper/Stripper/Cutter provides fast, reliable connector termination for voice and data applications. This all-in-one tool, cuts, strips, and crimps CAT6, CAT5e, CAT3 and flat-satin voice cables. Its direct lateral crimp action provides more even, precise contact termination across all pins than ordinary indirect crimp tools. A compact, ergonomic design provides easy usage and storage.

Wire Stripper, Wire Crimper, Wire Cutter for CAT3, CAT5e, CAT6 and flat-satin voice cable
Crimps RJ45 and RJ11/12 modular connectors
Full-cycle ratchet mechanism ensures complete connector termination
Compact, ergonomic design for natural, single-hand operation
Direct lateral crimp action provides more even, precise contact termination across all pins
Quick reference connector wiring diagrams provided on the tool
Not for use with AMP connectors
AMP is a registered trademark of TYCO, Inc.

Klein Tools VDV211-100 Extended Reach Multi-Connector Compression Crimper

The Extended Reach Coax Crimper is designed with an elongated neck specifically for work in confined spaces and for short cable installations. This versatile tool easily crimps compression F, BNC and RCA connectors with an adjustable universal plunger and on-tool markings. The open-channel design makes it easy to insert all connector head styles. Klein Tools also offers Universal Sleeve connectors that are 5x faster to install–they fit all diameter variations within a cable series and even fit difficult to work with multi-shield and plenum cables.

Optimized for confined-space and short cable installation and repair
Crimps F, BNC and RCA compression connectors onto RG59, RG6 and RG6Q coaxial cables
Made of stamped steel for added durability
Adjustable extended length universal plunger ensures optimized crimping on multiple types of connectors
Open-channel design for easy insertion of all connector head styles
Integrated leverage point to assist F-connector installation
Connector markings and mm scale are lasered into tool for consistent crimping

Klein Tools VDV200-010 Ratcheting Crimper Frame

Klein Tools’professional CATV, Electrical, Home Theater, Satellite and Security System ratcheting crimper frame with optional dies is perfect for fast, reliable connector installations.Full-cycle ratchet action assures a complete, precise crimp every cycle.It has a preset tension for optimum performance.

Ratchet mechanism is designed to prevent the release of the connector prior to full compression
Safety crimp release helps eliminate rejected terminations due to incorrect positioning
Steel body with black-oxide finish for corrosion resistance and durability
Yellow and black grips enhance comfort, visibility, and allow quick identification
Thumb-screws secure die-sets for quick, easy changes
Optional replacement thumb and Phillips screw set (VDV999-033) also available
VDV211-038 (RG 58/59/62);VDV205-039 (Pin Terminal Insulated or Non-Insulated Ferrule AW12-22); VDV201-040 (RG58/59/62/174 Fiber Optic); VDV211-041 (RG58/59/62/6); VDV201-042 (RG174/179/Belden 8218 and Fiber Optic); VDV211-043 (RG8/11/174/179/213);
VDV205-044 (Non-Insulated Terminal AWG8-18)
Optional, quick interchangeable die sets available
Optional die sets available: VDV212-034 (CATV F-Connector RG59/6); VDV205-035 (Insulated Terminal AWG10-22); VDV205-036 (Non-Insulated Terminal or Open Barrel Terminal AWG10-20); VDV211-037 (RG6/58/59/62);

Klein Tools VDV110-261 Twisted Pair Radial Stripper

Klein Tools’ Twisted Pair Radial Stripper provides fast, one-step stripping of coax cables.Durable, high-carbon steel cutting blades automatically adjust to the cable diameters and won’t damage internal conductors. Consistent cuts won’t nick the inner sheaths. Klein’s exclusive external blade easily strips wire jacket mid-span and/or opens wire jacket lengthwise.

Easily and cleanly strips shielded and unshielded twisted pair cable (CAT3, CAT5/5e and CAT6/6A)
Durable, high-carbon steel cutting blades automatically adjust to cable diameters
Finger loop design for smooth, easy rotation
Additional external blade in a structured design allows user to slit wire jacket for mid-span access or to open lengthwise
Consistent cuts won’t damage internal conductors

Klein Tools VDV110-095 Coax Cable Radial Stripper

Klein Tools’ Coax Combination Radial Stripper works on both standard and utility size cables. The durable, high-carbon steel cutting blades automatically adjusts to the different cable diameters. Klein’s exclusive sliding depth gauge pre-measures cable for fast, accurate and repeatable stripping every time.

Durable high-carbon steel cutting blades automatically adjust to different cable diameters
Complete 2-level cable prep/stripping in one step to 5/16-Inch and 1/4-Inch (7.9 mm and 6.4 mm)
It preps/strips five different series of RG cables including: RG59, RG6, RG6Q, RG11 and RG7
Easy debris clean-out
Finger loop facilitates easy, controlled rotation
Perfect for the data installer who works with utility cable as well standard cable

Klein Tools VDV110-061 Coax Cable 2-Level Radial Stripper

This cable stripper prepares multiple types of cable in common voice/data/video applications. It features an exclusive sliding depth gauge and variable stripping capability. The Klein Tools’ coax cable radial stripper 2-level is made of high quality materials and construction for long-lasting results.

Exclusive sliding cable stop pre-measures cable for fast, accurate and repeatable strips
Preps and strips RG59/RG6/6Q coaxial cable
Two-level coaxial prep – 5/16-Inch and 1/4-Inch (7.9 mm and 6.4 mm)
Sliding depth gauge for easy debris clean-out
Durable high-carbon steel pre-set cutting blades automatically adjust to different cable diameters for precise, accurate cable stripping
Finger loop design facilitates easy, controlled rotation
Bright, highly visible color for quick identification
U.S. Patent No. D688,927

Klein Tools VDV026-831 VDV ProTech Data Kit

The VDV ProTech Data Kit has the tools you need to install twisted pair cables. The kit includes plugs, a crimper and scissors. The box has room to hold these and any additional tools you may carry to make your data connections.

The VDV ProTech Data Kit has the tools you need to install twisted pair cables including:
One VDV ProTech Transport which is a lightweight tool case with 12 organizational compartments for small parts and a large, open section to hold hand tools
One Compact Ratcheting Modular Crimper (VDV226-107)
One Free-Fall Snip – Stainless Steel (2100-8)
One 25-pack — Telephone Plug – RJ11 – 6P6C (VDV826-600)
Two 10-packs — Modular Data Plug – RJ45 – CAT5e (VDV826-628)
One 25-pack — Modular Data Plug – RJ45 – CAT6 (VDV826-603)

Klein Tools TI222 Thermal Imager for iOS Devices

The Klein Tools TI222 Thermal Imager for iOS Devices has 10,800 pixels delivering excellent resolution to troubleshoot hot and cold spots. This Thermal Imager is perfect for detecting hot spots in panels, on wiring, or on parts of equipment; helping find sources of energy loss within a home/building; helps detect moisture behind walls and flooring; clogs in pipes; and much more. Fits phone cases up to 1/16-Inch (1.5 mm). Phone cases thicker than 1/16-Inch (1.5 mm) may require removal of case for secure connection. Easily capture, store, and share thermal images and video through the Klein Tools Thermal Imager App, available for free in the App Store.

Thermal Imager for iOS Devices has 10,800 pixels to deliver excellent resolution for troubleshooting hot and cold spots
Fits phone cases up to 1/16-Inch (1.5 mm); phone cases thicker than 1/16-Inch (1.5 mm) may require removal of case for secure connection
Easily capture, store and share thermal images and video, including time-lapse video
Features touch screen temperature, high/low temperatures, and differential temperature readout
View temperature ranges from -4 to 752-Degree Fahrenheit (-20 to 400-Degree Celsius) in three color palettes; ironbow, rainbow, or grayscale
Includes high/low temperature alarms to monitor systems
Compatible with iOS devices 11 and higher
Klein Tools Thermal Imager App is available for free in the App Store
Durable 6.6-Foot (2 m) drop test protection

Klein Tools RT210 GFCI Outlet Tester

Klein Tools Receptacle Testers are designed to detect the most common wiring problems in standard and GFCI receptacles. A convenient chart on the tester helps determine wiring condition in outlet, based on lights results. Conditions indicated: open ground, reverse polarity, open hot, open neutral, hot/ground reversed.

GFCI Tester detects the most common wiring problems in standard and GFCI receptacles
Works on GFCI outlets and confirms operation of the ground fault protective device
Built to withstand a 6.6-foot (2m) drop
Operating temp: 32-Degree to 140-Degree Fahrenheit (0-Degree to 40-Degree Celsius)
Nominal Voltage: 110/125V AC at 50/60Hz in 3-wire outlet

Klein Tools RT110 Receptacle Tester

Klein Tools RT110 Receptacle Tester detects the most common wiring problems in standard receptacles. Conditions indicated: wiring correct, open ground, reverse electrical outlet, open hot, open neutral, hot/ground reversed. Conditions not indicated: quality of ground, multiple hot wires, combinations of defects, reversal of grounded and grounding conductors.

Outlet tester’s light sequence on receptacle tester indicates correct/incorrect wiring
Receptacle tester conforms to UL Std 1436, Certified to CSA Std C22.2 #160
Operating temp: 32-degrees F to 140-degrees F (0-degrees C to 40-degrees C)
Built to withstand a 6.6-foot (2m) drop
Nominal Voltage: 110/125V AC at 50/60Hz in 3-wire outlet
Designed to detect the most common wiring problems in standard receptacles

Klein Tools NCVT-4IR Non-Contact Voltage Tester Pen, 12-1000 AC V with Infrared Thermometer

Klein Tools NCVT-4IR is a voltage tester that provides non-contact determination of AC voltage in cables, cords, circuit breakers, switches, outlets and wires; as well as infrared (IR) thermometer measurements, making it the perfect choice for HVAC professionals.

Voltage Tester designed specifically for HVAC applications
Non-Contact Voltage Tester provides non-contact determination of AC voltage in cables, cords, circuit breakers, switches, outlets and wires, and AC voltage in security, entertainment, communications, environmental control, and irrigation systems
Detects AC voltage from 12 to 1000V with visual and audible indicators
4:1 distance-to-spot ratio IR thermometer with user selectable Degrees Fahrenheit or Degrees Celsius from -22 to 482-Degree Fahrenheit (-30 to 250-Degree Celsius)
Convenient laser pointer to target measurement area for temperature measurement
Backlit LCD display with 0.1-Degree resolution
Auto power-off conserves and extends battery life
Screw-thread battery cap with O-ring ensures dust and water resistance
Lightweight, compact tool with pocket clip provides easy storage and quick access

Klein Tools NCVT2P Dual Range Non-Contact Voltage Tester 12 – 1000V AC

The NCVT-2P is a non-contact voltage tester that detects 12 to 1000V AC and indicates the presence of voltage in cables, cords, circuit breakers, light fixtures, switches, outlets and wires as well as AC voltage in doorbells, thermostats, low voltage lighting and irrigation systems. Includes both visual and audible signals. The NCVT-2P is rugged enough for any job site.

Non contact voltage tester’s dual-range capabilities allow tester to detect from 12 to 1000 V AC or 70 to 1000V AC for a broad variety of low-voltage or standard voltage applications
Electrical voltage tester detects voltage with simultaneous visual and audible indicators
Non-contact detection of low voltage in security, entertainment, communications, environmental control, and irrigation systems
Green light indicates no voltage
Lightweight, compact tool with pocket clip provides convenient storage and quick access
Auto power-off feature conserves and extends battery life
CAT IV 1000 V rating provides expanded operation and protection
Screw-thread battery cap with O-ring ensures protection against dust and water ingress
6.6-Foot (2 m) drop protection
IP54: Dustproof and waterproof

Klein Tools KT223X4 Lineman’s Ratcheting 4-in-1 Box Wrench

The Lineman’s Ratcheting 4-in-1 Box Wrench is a versatile and rugged tool designed for tough, utility applications. It features four 12-point socket sizes: 1/2-Inch, 9/16-Inch, 5/8-Inch, and 3/4-Inch, all in one compact tool. The wrenches have grooved handles to prevent slipping and reverse ratcheting action by reversing switches on each end of the wrench. They also have a chrome-plated finish to resist corrosion, making them ideal for use in harsh environments. With different size openings at each end, this wrench is perfect for a wide range of tasks.

4-in-1 Lineman’s Ratcheting Box Wrench with 1/2-, 9/16-, 5/8- and 3/4-Inch sockets feature smooth edges to provide extra comfort during use
Compact size makes it easy to store in a toolbox or carry on the job
Four 12-point sockets ensure a tight and secure grip on nuts of different sizes
Grooved handles provide a non-slip grip for added safety and precision
Made in the USA
Reverse ratcheting action provides added flexibility in various applications
Chrome plated finish prevents rust and corrosion for long-lasting use
Clearly marked sockets allow for easy identification and quick selection of the desired size

Klein Tools K12065CR Klein-Kurve Heavy-Duty Wire Stripper / Cutter / Crimper Multi Tool

Klein’s forged Wire Stripper / Cutter / Crimper Heavy-Duty Multi Tool is built with the durability of pliers, the sharpness and precision of a wire stripper and an integrated crimper. This American-made tool provides durable wire cutting, stripping, crimping and twisting plus bolt shearing in one tool. Four times (4X) stronger than traditional Klein wire strippers. This tool strips 8-18 AWG solid and 10-20 AWG stranded wire and crimps 10-20 AWG stranded. Easily twists three wires at a time.

Wire Stripper with six stripping holes for 8-18 AWG solid and 10-20 AWG stranded wire
Multi Tool’s side cut design features longer knives for more cutting
Crimps non-insulated connectors, lugs and terminals for 10-20 AWG stranded wire
Knurled jaw for twisting, grabbing and looping wire, twists up to three wires at a time
Made in USA
High leverage design for improved performance
Klein-Kurve comfort grip handles for reduced hand fatigue
Induction hardened cutting knives for long life
Hot-riveted joint ensures smooth action and no handle wobble
Forged of custom, US made steel

Klein Tools K11095 Klein-Kurve Wire Stripper / Cutter, 8-20 AWG

This Wire Stripper/Cutter features six stripping holes and a shear-cutting knife to handle 8-18 AWG Solid and 10-20 AWG Stranded wire, plus shearing holes for 6-32 and 8-32 bolts. Longer hand grip coverage provides a more comfortable grip while the updated lock tucks nicely out of the way. The narrow head design allows this tool to easily get into tight places.

Wire Stripper with six precision ground stripping holes for 8-18 AWG Solid and 10-20 AWG Stranded wire
Narrower head geometry gets into hard to reach places
Screw shearing holes for 6-32 and 8-32 bolts and precision, shear-like blades that provide clean cuts
Dual wire looping holes
Made in USA
Updated lock tucks out of the way
Coil spring provides fast self-opening action
Klein-Kurve comfort grip handles with extended tool coverage

Klein Tools JTH9E15 3/8-Inch Hex Key, Journeyman T-Handle, 9-Inch

Klein hex-keys are the tools professionals cannot afford to be without. The Journeyman Hex T-Handle from Klein Tools delivers more torque to the fasteners than standard hex keys. Heat-treated and tempered for superior strength and durability. Klein hex-keys are designed for a precise fit in sockets, preventing slippage and stripping of the socket.

T-handle design delivers maximum power
Soft touch grips for maximum control and comfort
Sizes laser etched on blade
Blade-through-handle design for high torque applications
Tip-Ident sizes marked
Convenient hang hole
Chamfered end for ease of use
Treated steel for rust and corrosion resistance

Klein Tools J63225N Journeyman High Leverage Cable Cutter with Stripping

Cut aluminum, copper and communications cable with this Journeyman High-Leverage Cable Cutter. Strip 1/0 and 2/0 cable with the integrated stripping hole. Cable-gripping shear-type jaws and a high-leverage design provide exceptional cutting capability. Dual material Journeyman handles provide a superior grip.

Cable cutter cuts 4/0 aluminum, 2/0 soft copper and 100-pair 24 AWG communications cable
High-leverage design for exceptional cutting capability and precision, one-hand shearing action
Integrated stripping hole strips 1/0 and 2/0 cable
State-of-the-art, dual material Journeyman handles provide a better grip without sacrificing tool strength or durability
Made in USA from forged, custom, US-made tool steel for maximum durability
Cable-gripping shear-type jaws
Perfect for working in confined spaces
Through-hardened (not case-hardened) for longer-lasting cutting surfaces
Hot-riveted joint ensures smooth action and no handle wobble
Do not use to cut steel or ACSR