2:1 Ratio Heat Shrink Tubing, Spool – Green

3/64”, 1/16”, 3/32”, 1/8”, 3/16”, 1/4”, 3/8”, 1/2″, 3/4″, 1”, 1-1/2”, 2”

Color: Green

Our heat shrink is a flexible polyolefin tubing that offers an outstanding balance of electrical, physical and chemical properties for a wide variety of industrial and military applications. Our tubing is typically used as shrink-fit electrical insulation over cable splices and terminations. It is also used for lightweight wire harness covering, wire marking, wire bundling, component packaging and fire resistant covering.

NTE Heatshrink Tubing Technical Brochure

HEATSHRINK

Kiesub LB5001-REELA/D LED Reel Light S2000 Slot Machines

MINIMUM ORDER: 20 PIECES

Kiesub LB5001-REELA/D LED Reel Light S2000 Slot Machines

Manufactured in Kiesub Electronics’ Contract Manufacturing division right here in Las Vegas.

Energy-efficient LED technology brightens machines-uses less power-saves money! Disperses LED light evenly and makes graphics glow. Refreshes the look of your machines with super-bright LED lighting. Much brighter than fluorescent or incandescent lamps.
Mounts in existing brackets in just seconds with no modifications. Bypass ballast and plug into existing harness. Operates from 24vdc of the machine.

LEDs last 50,000 to 100,000 hours (5 years)
Generates less heat-cool to the touch
Bypasses the ballast-no more ballasts to fail
Saves on repair and replacement of other heat-sensitive components
Machines can be opened or moved without lamp failure-no filaments to break
Made in USA
Contact us to discuss your needs,get quantity pricing, request a demonstration, and to request the ROI worksheet.

All LED Panels from Kiesub Electronics are made in our manufacturing facility in Las Vegas, NV.

Neutrik NAC3FCA Powercon Locking 3-Pole Power Connector

Neutrik NAC3FCA Powercon Locking 3-Pole Power Connector

The Neutrik NAC3FCA Powercon locking 3-Pole power connector is for mission-critical applications where current loads up to 20 Amps at 250 Volts (AC) are handled.

NTE 54-544 SWITCH ROUND HOLE ROCKER SPST ON-NONE-(OFF) 16A

NTE 54-544 SWITCH ROUND HOLE ROCKER SPST ON-NONE-(OFF) 16A :

SWITCH ROUND HOLE ROCKER SPST ON-NONE-(OFF) 16A 125VAC W/LEGEND .185 TAB TERMINALS View Specs

2:1 Ratio Heat Shrink Tubing, 4ft. Lengths – Red

2:1 Ratio Heat Shrink Tubing, 4ft. Lengths – Red:

1/16″, 3/32”, 1/8”, 3/16”, 1/4”, 3/8”, 1/2″, 3/4″, 1”, 1-1/2”, 2″

125 deg. C
600V
Thin wall
2:1 ratio
Color: Red

Heatshrink

Powersonic PS-1227-F1 12V 3AH Battery

Powersonic PS-1227-F1 12V 3AH Battery

1-11		$14.17
12-49		$12.14
50-99		$11.33

TERMINALS: “F1″: Quick disconnect tabs, 0.187″X0.032”-Mate with AMP INC FASTON “187 series

Length	3.11 inches	79 millimeters
Width	2.20 inches	56 millimeters
Height	3.90 inches	99 millimeters
Height over Terminals	4.13 inches	105 millimeters
Approximate Weight	2.40 pounds	1.09 kilograms
Nom Cap: 20 hour rate	(145mA to 10.50 volts)	2.90 AH
Nom Cap: 10 hour rate	(260mA to 10.50 volts)	2.60 AH
Nom Cap: 5 hour rate	(490mA to 10.20 volts)	2.45 AH
Nom Cap: 1 hour rate	(1.8A to 9.00 volts)	1.80 AH

Batteries do not qualify for free freight promotion

K506-960 Keychain Single Clip

Heavy-Duty
Super-Strong
Flexible
Single Clip

25PA32 Belt Key Holder, Clip On, Silver

Powersonic 035018 F2 to F1 Battery Terminal Adapter (10pk)

Powersonic 035018 Terminal Adapter for sealed Lead Acid Battery

Adapts from .250 inch quick connect. F2 to 1.87 inch wide F1 connector.

10/pack

NTE 54-668 SWITCH SLIDE DPDT ON-OFF 6A 125VAC 3A

NTE 54-668 SWITCH SLIDE DPDT ON-OFF 6A 125VAC 3A :

SWITCH SLIDE DPDT ON-OFF 6A 125VAC 3A 250VAC .43 INCH ACTUATOR SOLDER TERMINALS View Specs

NTE 54-636 SWITCH BROWN MAGNETIC ALARM REED SPST

NTE 54-636 SWITCH BROWN MAGNETIC ALARM REED SPST :

SWITCH BROWN MAGNETIC ALARM REED SPST-NO 18 INCH LEADS ADHESIVE AND SCREW MOUNT 2 PIECE UNIT View Specs

NTE 54-062 SWITCH ROCKER MINIATURE SNAP-IN SPST OFF-NONE-ON 16A 125VAC

NTE 54-062 SWITCH ROCKER MINIATURE SNAP-IN SPST OFF-NONE-ON 16A 125VAC :

SWITCH ROCKER MINIATURE SNAP-IN SPST OFF-NONE-ON 16A 125VAC VISI RED ACTUATOR .250 INCH QC TERMINAL
View Specs

2:1 Ratio Heat Shrink Tubing, Spool – White

3/64”, 1/16”, 3/32”, 1/8”, 3/16”, 1/4”, 3/8”, 1/2″, 3/4″, 1”, 1-1/2”, 2”

Color: White

NTE Heatshrink Tubing Technical Brochure

HEATSHRINK

Powersonic PS-650-L-F1 6V 5.0AH Battery

Powersonic PS-650LF 6V 5.0AH Battery

F1 – Quick disconnect tabs, 0.187” x 0.032” – Mate with AMP. INC. FASTON “187” series

Nominal Voltage …………………………………………………………………6 volts (3 cells)
Nominal Capacity
20-hr. (250mA to 5.25 volts) …………………………………………………. 5.00 AH
10-hr. (430mA to 5.25 volts) …………………………………………………. 4.30 AH
5-hr. (800mA to 5.10 volts) …………………………………………………. 4.00 AH
1-hr. (3A to 4.50 volts) ………………………………………………………… 3.00 AH
15-min. (9.0A to 4.50 volts) ……………………………………………………….2.25 AH
Approximate Weight ………………………………………………….. 1.80 lbs. (0.82 kg)
Energy Density (20-hr. rate) ………………………….. 1.09 W-h/in3 (66.67 W-h/l)
Speciﬁ c Energy (20-hr. rate) ………………………… 16.67 W-h/lb (36.74 W-h/kg)
Internal Resistance (approx.) …………………………………………….. n/a milliohms
Max Discharge Current (7 Min.) ……………………………………….. 15.0 amperes
Max Short-Duration Discharge Current (10 Sec.) ……………….. n/a amperes
Shelf Life (% of nominal capacity at 68°F (20°C))
1 Month ………………………………………………………………………………………… 97%
3 Months ……………………………………………………………………………………….. 91%
6 Months ………………………………………………………………………………………. 83%
Operating Temperature Range
Charge .. ………………………………………………….. -4°F (-20°C) to 122°F (50°C)
Discharge ……………………………………………….-40°F (-40°C) to 140°F (60°C)
Case …………………………………………………………………………………………ABS Plastic
Power-Sonic Chargers …………………………..PSC-61000A, 6500A-C, 61000A-C

Batteries do not qualify for free freight promotion

Powersonic PS-1221-S 12V 2.0AH Battery

1-11		$27.92
12-49		$23.93
50-99		$22.33

Terminals: • F1/0

Nominal Voltage ………………………………………………………………12 volts (6 cells)
Nominal Capacity
20-hr. (100mA to 10.50 volts) ……………………………………………….. 2.00 AH
10-hr. (190mA to 10.50 volts) ………………………………………………. 1.90 AH
5-hr. (340mA to 10.20 volts) ………………………………………………. 1.70 AH
1-hr. (1.24A to 9.00 volts) ……………………………………………………. 1.24 AH
15-min. (3.33A to 9.00 volts) ……………………………………………………..0.83 AH
Approximate Weight ………………………………………………….. 1.50 lbs. (0.68 kg)
Energy Density (20-hr. rate) ………………………….. 1.44 W-h/in3 (88.00 W-h/l)
Speciﬁ c Energy (20-hr. rate) ………………………… 16.00 W-h/lb (35.27 W-h/kg)
Internal Resistance (approx.) ……………………………………………… 80 milliohms
Max Discharge Current (7 Min.) ………………………………………….. 6.0 amperes
Max Short-Duration Discharge Current (10 Sec.) ……………… 20.0 amperes
Shelf Life (% of nominal capacity at 68°F (20°C))
1 Month ………………………………………………………………………………………… 97%
3 Months ……………………………………………………………………………………….. 91%
6 Months ………………………………………………………………………………………. 83%
Operating Temperature Range
Charge .. ………………………………………………….. -4°F (-20°C) to 122°F (50°C)
Discharge ……………………………………………….-40°F (-40°C) to 140°F (60°C)
Case …………………………………………………………………………………………ABS Plastic
Power-Sonic Chargers …………………………………………………………. PSC-12300A

Batteries do not qualify for free freight promotion

Kiesub CC25 Coin Comparator Cable

Upgrade for 5 cent and 25 cent Coin Mech unit

Fluke 302+ CAT III Digital Clamp Meter

The Fluke 302+ is a compact, easy-to-use digital clamp meter made to fit the way you work. It is the perfect first-pass troubleshooting tool: small enough to fit in a work bag, tough enough to withstand daily use, and extremely simple to use. All without compromising safety. For everyday applications, where True-RMS accuracy isn’t needed, the Fluke 302+ delivers reliable measurements time after time.

Fluke 302+ Additional Features

The Fluke 302+ CAT III Digital Clamp Meter is more compact, making the use of clamp-type ammeter more flexible and simpler
Measure AC current up to 400A
30 mm large jaw
High accuracy of 1.8%
Backlit display
Two-year warranty

Fluke 302+ Comes with Fluke TL75 Hard Point™ Test Lead Set

One pair (red, black) of comfort grip probes
48 inches (1.22 meter) PVC insulated test leads with right-angle shrouded banana plugs
Recommended for general purpose measurements
CAT II 1000 V, 10 A rating
CAT IV 600 V, CAT III 1000 V only with protective cap

Fluke 302+ Safety Features

Meets CAT IV 300V/CAT ||| 600V safety rating

Key features

AC current measurements up to 400 A, handling your everyday electrical maintenance needs
Comes with the TL75 Hard Point™ Test Lead Set offering the convenience of a test lead and probe in one unit with a variety of connections
Rugged, easy-to-use digital clamp meter with CAT IV 300 V/CAT III 600 V safety rating

Technical Specifications
AC current	Range	400.0 A
	Accuracy	1.8% ±5
AC voltage	Range	400/600
	Accuracy	1.5% ±5
DC voltage	Range	400/600
	Accuracy	1.5% ±5
DC mV range		–
Resistance	Range	4000 Ω
	Accuracy	1% ±5
Continuity		≤ 70 Ω
Backlight display		Yes
Data hold		Yes
Size	H x W x D (mm)	208 x 58.5 x 28
	Jaw size	30 mm
Safety rating		CAT III 600 V
Temperature		0 ~ 40 °C
Screen refresh rate		> 2 times / sec.
Test leads		TL75
Battery		2 AAA batteries
Warranty		2 years

Includes:

Fluke 302+ CAT III Digital Clamp Meter
Fluke TL75 Hard Point™ Test Lead Set
2 AAA batteries (installed)
2-year warranty

NTE 54-574 SWITCH ILLUMINATED DUCK BILL TOGGLE SPST ON-NONE-OFF 20A

NTE 54-574 SWITCH ILLUMINATED DUCK BILL TOGGLE SPST ON-NONE-OFF 20A :

SWITCH ILLUMINATED DUCK BILL TOGGLE SPST ON-NONE-OFF 20A 12VDC BLUE 12V NEON LAMP .250 IN QC TERM View Specs

NTE 54-240W SWITCH WATERPROOF ILLUMINATED ROCKER SPDT 20A ON-OFF-ON RED-GREEN 110V

SWITCH WATERPROOF ILLUMINATED ROCKER SPDT 20A ON-OFF-ON RED/GREEN 110V NEON LAMP .187 QC TERMINALS
View Specs