Eclipse 300-011 IDC CONNECTORS CRIMPER FOR FLAT CABLE

Eclipse 300-011 IDC CONNECTORS CRIMPER FOR FLAT CABLE
- DC connectors height: 6mm~27.5mm width(max): 55mm
- 9.4 in. overall length
CAIG Rosin Soldering Flux, 56 gram jar
SPECS: The RMA paste flux meets DOD-STD-2000 & also the IPC-J-004 standard for type ROL0 , the lowest residue corrosivity category.
CAIG Rosin Soldering Flux, TYPE RSF-R80
Part No. RSF-R80-2:
Jar, 56 grams
Applicator: Jar
Formulation: WW Gum Rosin, Diethyene Glycol Dibutyl, Dymerex Rosin.
Use: Electrical soldering
Notes: General purpose flux for soldering electrical connections. Use CAIG NO-CLEAN Soldering Flux, TYPE RSF-R39 for precision soldering.
NEW . . .
CAIG Brand ELECTRONIC CLEANER WASH, Val-U Series Spray, 5.5 oz. / 156 g, fast evaporating and safe on plastics Ergonomic / Easy to Handle.
RoHS and VOC Compliant.
NEW . . .
CAIG Brand CONTACT CLEANER WASH, Val-U Series Spray, 5.5 oz. / 156 g, fast evaporating and safe on plastics Ergonomic / Easy to Handle
RoHS and VOC Compliant.
DeoxIT D-Series D5 Spray, 5% solution, flushing action, L-M-H adjustable valve, 142 g (182 mL), each
(Applications = 1200 +/-)
Can using the original Low-Med-High (LMH) Adjustable valve
DeoxIT D-Series Contact/Connector Treatment, Deoxidizer, Rejuvenator & Protectant
Part No. D5S-6-LMH (142 g)(182 ml):
Original Low-Med-High Adjustable Valve
Applicator: Spray, provides flushing action, briefly flammable (until solvent evaporates within 2-3 minutes).
Formulation: 5% DeoxIT (active ingredient), 75% odorless mineral spirits (carrier solvent), 20% propellant
Use: Solvent is slower to evaporate, providing flushing action to remove surfaces dirt, grease and other contaminants. Is ideal for connectors and components removed from equipment or those that are easily accessible.
Notes: Use when over spray not an issue. Formulation safe on plastics. Always recommend testing for compatibility, especially on critical/sensitive parts, and vintage equipment with aging ABS plastic(s). On rubber, may swell until solvent evaporates. For quick-dry, non-drip spray, we recommend Part Nos. DN5S-2N and DN5S-6N.
DeoxIT Cell Phone Connector Cleaning Kit, D100L Brush Bottle, 100% solution, 1.6 ml,
(Applications = 50 +/- drops, 0.04 ml/drop)
Ideal for connections on your cell phones, PDA s, MP3 Players, Cordless Phones and Mobile Radios.
100% Liquid, No solvents
Applicator: Micro Brush, provides NO flushing action, applies 100% DeoxIT, Great for OEMs or include in service kit.
Formulation: 100% DeoxIT.
Use: When contact and connector are easily accessible. No flushing action.
Notes: Use when over spray is an issue on materials. Formulation safe on plastics. Recommend wiping off excess, leaving a thin layer. After application, if you notice a green or black discoloration (sometimes over time), this indicates it is doing its job (dissolving oxidation) and improving the connection. Wipe off and re-apply DeoxIT.
Frame: Die Cast Aluminum, Black Finish
Impeller: PBT, UL94 V-0 Plastic
Power Connection: 2x Lead Wires, 22 AWG 300mm, or Terminals
Motor: AC Shaded Pole, Impedance Protected
Bearing System: Dual Ball, or Sleeve
Dielectric Strength: 1500VAC/min, <1mA
Insulation Resistance: >=10MOhm @ 500V DC
Operating Temperature: -20 degrees C ~ +75 degrees C
Storage Temperature: -40 degrees C ~ +100 degrees C
Features:
• Wide range temperature measurements from
-54°F to 1000°F without contact
• Large LCD display with backlighting
• Built-in laser pointer to improve aim
• °F/°C switchable with 0.1° resolution to 199.9
• Fixed emissivity (0.95) covers 90%
of surface applications
• Narrow field of view
• Audible and visible overrange indicators
• Automatic Data Hold
• Pocket size meter
• Complete with 9V battery and carrying case
Applications:
• Measure surface temperature of objects which
are difficult to reach or unsafe to contact
• Measure hot spots in electrical panels and equipment
• In-process temperature measurements
Cable end X series 5 pin male – nickel/silver. The “industry standard” XLR cable connector, easy to assemble with only 4 parts and no screws. Compact design with sturdy diecast shell, fibreglass reinforced hard plastic insert and chuck type strain relief for secure clamping of all cables.
The SWYVEL is a versatile, rechargeable flashlight that features Smart Power Control, which smoothly transitions the 5 light modes, including the 1,000 lumen Turbo Mode. The compact size and steel clip provide convenient carry, and the 90º swivel head and magnetic base give you hands-free light in any direction. The SWYVEL is small enough for your pocket and bright enough for any job.
The SLIM+ is a thin, ergonomic rechargeable 700 lumen pocket light with a red laser pointer and a Power Bank for your USB powered devices. Equipped with full dimming and Power Memory Recall, the SLIM+ also features a detachable magnetic pocket clip, collapsible hanging hook and powerful magnetic base for convenient hands-free lighting.
The beauty of the COLUMBO™ Keychain Pocket Light is its’ simplicity and convenience. No need to cycle through multiple light modes, simply activate it with the easy, one-hand twist operation. Built from aircraft-grade aluminum, the housing is anodized for corrosion resistance and it is water-proof and impact-resistant. The 100 lumen LED runs on a single AAA battery and the removable keyring lets you attach it to your car keys, a backpack or purse so it is always close at hand. Measuring at just over 3-inches in length and less than 1-inch in diameter, it is not much larger than a lip balm or a pack of gum. Thanks to the COLUMBO™ Keychain Pocket Light, there’s no excuse to not have a light so you’re prepared for the unexpected.
The INSPECTOR™ 500+ is a powerful 500 lumen, rechargeable, waterproof (IPX7) penlight and expandable area light. The INSPECTOR™ 500+ is equipped with a powerful magnetic base, steel clip, 4 light modes and features Flex-Power Technology, which allows the light to be powered by rechargeable or AAA batteries.