Jonard Tools JIC-22035NT/10 Probe Picks (Spudger pack of 10)

Designed with an uninsulated L-shaped wire hook extension on one end and a 3/16″ wide flat notched end on the other, this probe pick is perfect for guiding, probing, separating, and removing wire and insulation debris from network punch-down panels and jacks. This probe pick features the following:

Two small notches on the flat end help grasp wires and electrical contacts
Made of a resiliant ABS material for high durability and insulating properties
Can also be used to probe electrical contacts without damaging them
Includes (10) probe picks without shrink tubing

Jonard Tools JIC-186 Wire & Kevlar Cutting Shears

The Jonard Tools JIC-186 Wire and Kevlar Cutting Shears are designed to cut Kevlar, cabling insulation, tape, cable ties, and other materials with ease. These cutting shears feature the following:

High carbon stainless steel blades are heat-treated to HRC 58-60 for longer life and durability
Handles are made of dual component nylon and Santoprene material and are ergonomically designed for superior comfort and long term durability
Adjustable with joint screw under the protective cap
Serrated blade for gripping as well as sharp and durable cutting

Jonard Tools JIC-175 Ergonomic Fiber Optic Stripper, 250 micron

The Jonard Tools JIC-175 Ergonomic Fiber Optic Stripper is made with preset factory settings and no adjustments required. This fiber optic stripper is designed to strip 250 micrometer buffer coating to expose the 125micrometer optical fiber in fiber optic cables. This fiber optic stripper features the following:

Unique design strips 250-micron buffer to expose 125-micron optical fiber without damaging the fiber
Blades are ground and hardened for higher durability and longer life
Ergonomic thermoplastic rubber (TPR) handles are comfortable and easy to use

Jonard Tools FDC-66 Fiber Scraps Disposal Can

The Fiber Scraps Disposal Can allows safe disposal of cleaved fiber ends. The disposal can features the following:

Twist lock cover locks scraps in the disposal can for safe and easy disposal
Disposal can has a 2 oz capacity with a paperboard body and plastic top and bottom
Lightweight design to accommodate any tool kit or splice/connector station

Jonard Tools FCC-250 Fiber Connector Cleaner, 2.5 mm

Featuring a patented 360 rotational tip for extra-wide cleaning, the FCC-250 Fiber Connector Cleaner provides exceptional cleaning performance on 2.5 mm ferrules in recessed fiber optic adapters or individual FC, SC, and ST connectors. This fiber connector cleaner features the following:

Slide-Guide non-slip micro tape feeder guarantees consistent cleaning
Dual rotational tip and one-push operation makes cleaning ferrule end-faces quick and easy
Flip-open cap makes it easy to insert connectors for cleaning
Can be used for over 800 cleanings and has a visual indicator to see how much cleaning material is left
Static-free housing and cleaning cloth make this tool perfect for ESD-safe work
Great for many applications (satellite communication systems, military and civilian maritime optical networks, aviation, broadcasting and HDTV, fiber to the antenna for WiMax and cellular networks, outside plant and fiber to the home, cable television head end, data centers, telecom central offices) and crush resistant to over 250N, impact resistant to survive drops over 1.5M
Jonard cleaners meet or exceed all current and emerging standards for fiber cleanliness in high power laser applications (Telcordia GR-2923-CORE, iNEMI, IEC 61300-3-35, Cisco EDCS 7027180)

Jonard Tools EX-6 PLCC Extractor (20-128 Pins)

Designed to extract Plastic Leaded Chip Carriers (PLCC) without damaging them, this PLCC Extractor is perfect for removing PLCCs with 20-128 pins. This DIP/IC Extractor features the following:

Spring-loaded design requires no pulling at all, simply squeeze the handles and the chip is lifted from the socket
Stainless steel construction provides long life and durability

Jonard Tools EX-5 PLCC Extractor (20-128 Pins), ESD Safe

Designed to extract Plastic Leaded Chip Carriers (PLCC) without damaging them, this PLCC Extractor is perfect for removing PLCCs with 20-128 pins. This DIP/IC Extractor features the following:

ESD-safe housing protects the chips from accidental static discharge
Spring-loaded design requires no pulling at all, simply squeeze the handles and the chip is lifted from the socket
Stainless steel construction provides long life and durability

Jonard Tools EX-2 DIP/IC Extractor (24-40 Pins)

Designed to extract internal components from DIP Sockets as well as LSI, MSI, and SSI Devices, this DIP/IC Extractor is perfect for removing chips with 24-40 pins. This DIP/IC Extractor features the following:

Built-in grounding lug helps protect from short circuiting or static discharge
Specially designed hooks firmly grasp chips without damaging them.

Jonard Tools DPT-200 Antistatic Desolder Pump Tip For DP-200

Desoldering Pump Replacement Tip for DP-200

Hakko TRR-58-G Macro Cutter

Very strong tool for a flush cut, suitable, apart from work in electronics and can also be used for jewelry and for cutting rubber seals.
This tool is a very strong flush cut tool with a wide head and long handles. Aside from work in electronics, goldsmiths use this tool to cut rubber seals.

Cutting Force: 15 kg
Cut: Flush
Max cut: 10 AWG copper wire
Center Screw: NA
Safety clip: NA

Hakko TR-30-58 Medium Cutter

Tool for a chamfered cut. The special treatment of blades make this tool particularly suitable for the cutting of ferrous material. Safety clip for holding wire scraps securely after cutting available (order part number TR-30-58-A). Safety clip type AL.

Chamfered cutting tool
Special treatment of the blades makes this tool particularly suitable for cutting ferrous material
Cutting Force: 8.5 kg
Cut: Chamfered
Max cut: 14 AWG copper wire
Handle: NA
Part Number (with safety clip): TR-30-58-A

Hakko TR-30 Medium Cutter

Tool for a flush cut. One of the most popular cutting tool. Safety clip for holding wire scraps securely after cutting available (order part number TR-30-A). Safety clip type AL.

Tool for a flush cut
Similar to the TR-25 but with stronger blades
As an added bonus, the tool exhibits longer life due to its thicker steel
Cutting Force: 5.5 kg
Cut: Flush
Max cut: 16 AWG copper wire
Handle: NA
Part Number (with safety clip): TR-30-A

Hakko TR-20-M Micro Cutter

Tool for a flush cut. The reduced head s dimension and its pointed shape, allow access to difficult to reach areas. Safety clip for holding wire scraps securely after cutting available (order part number TR-20-M-A). Safety clip type AF.

The small head and anatomic design makes this an ideal cutter for working in tight spaces.

Cutting Force: 3 kg
Cut: Flush
Max cut: 20 AWG copper wire

Hakko T18-DL32 Chisel Tip

3.2MM Long Chisel

This tip is used with the following Hakko Soldering Stations and Systems:
Hakko FX-888 Soldering Station
Hakko 913 ESD Safe Fume Extraction Iron (Requires a Fume Extraction System)
Hakko 907 Soldering Iron
Hakko 907-ESD Soldering Iron
Hakko 900M Soldering Iron
Hakko 900M-ESD Soldering Iron
Hakko 928 Soldering Station
Hakko 936 Soldering Station
Hakko 936-ESD Soldering Station
Hakko 937 Soldering Station
Hakko 703 Soldering Station

Hakko T18-C2 Bevel Tip

2.1MM/45 degree Bevel

Hakko PN-2007 Long Nose Pliers

The PN-2007 is a serrated, flat long nose pliers ideal to be used in difficult to reach areas.

For delicate work in tight areas
32mm long jaw with 3.0mm nose
Nose: Flat
Jaws: Serrated
Outside Edge: Flat

Hakko PN-2006 Long Nose Pliers

The PN-2006 is a smooth, pointed long nose pliers ideal to be used in difficult to reach areas.

For delicate work in tight areas
32mm long jaw with 1.2mm nose
Nose: Pointed
Jaws: Smooth
Outside Edge: Flat

Hakko PN-2002-PM Pointed Nose Pliers

Smooth, 45 degree angled long nose pliers with rounded external edges. Thanks to its shape, it gives a wide angle of vision of the work area.

Thin, short pliers for very delicate work
Angled to 45 degrees
16mm jaw with 1mm nose
Nose: Pointed
Jaws: Smooth
Outside Edge: Rounded