Fluke C125 Meter Case
Fluke C125 Meter Case
- Zippered carrying case with detachable external pouch.
- Additional pouch is designed to carry test leads and probes.
- Convenient belt loop accommodates tool belt.
- 1 year warranty
Fluke AC285 SureGrip Alligator Clips
Fluke AC285 SureGrip Alligator Clips
Fluke AC285 SureGrip Alligator Clips are designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.
- One pair (red, black) of large alligator clips with nickel-plated steel jaws
- Multi-purpose tooth pattern grips anything from fine gauge wire to a 20 mm bolt
- Recommended for use with TL222 and TL224 test leads
- CAT IV 600 V; CAT III 1000 V, 10 A rating. UL listed
- One year warranty
Fluke AC220, AC280, AC283 CE Declaration of Conformity
Fluke AC283A SureGrip Pincer Clips
Fluke AC283A SureGrip Pincer Clips
Fluke AC283A SureGrip Pincer Clips designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.
- One pair (red, black) of nickel plated pincers open to 5 mm
- 11.4 cm flexible insulated shaft
- Recommended for use with TL222 and TL224 test leads
- CAT IV 600 V, CAT III 1000 V, 1 A rating. UL listed
- One year warranty
Fluke AC220, AC280, AC283 CE Declaration of Conformity
Fluke AC280 Hook Clips
Fluke AC280 Hook Clips
Fluke AC280 Hook Clips SureGrip™ accessories are designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.
- One pair (red, black) of nickel plated clips
- Profile narrows to 5.6mm at tip, hook opening 6.4mm at front, 2mm at base
- Recommended for use with TL222 and TL224 test leads
- CAT IV 600 V, CAT III 1000 V, 3 A rating. UL listed
- One year warranty
Fluke AC280 Declaration of Conformity
Fluke AC220 Alligator Clips
Fluke AC220 Alligator Clips
Fluke AC220 Alligator Clips are designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.
- One pair (red, black) of small, insulated, nickel plated jaws
- Blunt tip grabs round screw heads up to 9.5 mm
- Recommended for use with TL222 and TL224 test leads
- CAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed
- One year warranty
Fluke 80TK Thermocouple Module
Fluke 80TK Thermocouple Module
FREE UPS GROUND SHIPPING
- Converts a DMM to a thermometer
- For use with type-K thermocouples in low voltage applications(below 24 V AC, 60 V DC)
- Measurement range:-50 to 1000°C (probe dependent)
- One year warranty
Fluke 80PK-22 SureGrip Immersion Temperature Probe
Fluke 80PK-22 SureGrip Immersion Temperature Probe
This Fluke 80PK-22 SureGrip Immersion Temperature Probe is an immersion temperature probe is designed for use in liquid and gels. It can be used as a general purpose temperature probe.
The Fluke 80PK-22 SureGrip Immersion Temperature Probe is designed for use in liquid and gels. It can also be used as a general purpose temperature probe. The thermocouple junction is protected from tip to handle by an Inconel sheath. The 80PK-22 can be used with any temperature-measuring instrument that is designed to accept type K thermocouples and has a miniature connector input.
- Type-K thermocouple for use in liquids and gels
- Measurement range:-40 to 1090°C
- One year warranty
Fluke 80K-6 High Voltage Probe
Fluke 80K-6 High Voltage Probe
FREE UPS GROUND SHIPPING
The 80K-6 is a high voltage probe designed to extend the voltage measuring capability of an AC/DC voltmeter to 6000 volts peak AC or DC Overvoltage Category I. This means the probe can only be used to make measurements on energy limited circuits within equipment. Examples include high voltage within televisions or photo copy machines. DO NOT use this probe to measure high voltages on power distribution systems. The probe provides high accuracy when used with a voltmeter having 10 Megohm input impedance.
- A high voltage probe that allows a multimeter to measure up to 6,000V or 40,000V respectively. Intended for low energy applications only
- One year warranty
Fluke 80K-40 High Voltage Probe
Fluke 80K-40 High Voltage Probe
FREE UPS GROUND SHIPPING
The Fluke 80K-40 High Voltage Probe is designed to extend the voltage measuring capability of an AC/DC voltmeter to 40,000 volts peak AC or DC Overvoltage Category I. This means the probe can only be used to make measurements on energy limited circuits within equipment. Examples include high voltage within televisions or photo copy machines. DO NOT use this probe to measure high voltages on power distribution systems. The probe provides high accuracy when used with a voltmeter having 10 Megohm input impedance.
- A high voltage probe that allows a multimeter to measure up to 6,000V or 40,000V respectively. Intended for low energy applications only
- One year warranty
80K-15 Instruction Sheet
Fluke T5-600 Voltage, Continuity Current Tester
Fluke T5-600 Voltage, Continuity Current Tester
The Fluke T5 Electrical Tester let you check voltage, continuity and current with one compact tool. With the T5, all you have to do is select volts, ohms, or current and the tester does the rest. OpenJaw™ current lets you check current up to 100A – without breaking the circuit. Its tough test leads stow neatly in the back of the tester, making it easy to tote the T5 in your tool pouch. Detachable SlimReach™ test probes are customized for national electrical standards. The test leads accept optional accessories such as clips and specialty probes.
- 600 Volt Model
- Automatically measures volts ac and volts dc with precise digital resolution
- Displays resistance to 1000Ω
- Easy and accurate OpenJaw™ current measurement
- Continuity beeper
- Compact design with neat probe storage
- Rugged enough to withstand a 10-foot (3m) drop
- Detachable SlimReach™ probe tips are customized for national electrical standards
- Test leads accept Fluke accessory test clips
- Can stay connected much longer than solenoid type tester
- Auto off mode to conserve battery life
Fluke T5-1000 Voltage Tester
Fluke T5-1000 Voltage Tester
FREE UPS GROUND SHIPPING
The Fluke T5 Electrical Tester let you check voltage, continuity and current with one compact tool. With the T5, all you have to do is select volts, ohms, or current and the tester does the rest. OpenJaw™ current lets you check current up to 100A – without breaking the circuit. Its tough test leads stow neatly in the back of the tester, making it easy to tote the T5 in your tool pouch. Detachable SlimReach™ test probes are customized for national electrical standards. The test leads accept optional accessories such as clips and specialty probes.
- 1000 Volt Model
- Automatically measures volts ac and volts dc with precise digital resolution
- Displays resistance to 1000?
- Easy and accurate OpenJaw™ current measurement
- Continuity beeper
- Compact design with neat probe storage
- Rugged enough to withstand a 10-foot (3m) drop
- Detachable SlimReach™ probe tips are customized for national electrical standards
- Test leads accept Fluke accessory test clips
- Can stay connected much longer than solenoid type tester
- Auto off mode to conserve battery life
Fluke 1LAC VoltAlert
Fluke 1LAC VoltAlert
The pocket-sized voltage detector
The next generation VoltAlert™ AC non-contact voltage testers from Fluke are easy to use – just touch the tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, you know there’s voltage present. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits in the workplace or at home.
- Voltbeat™ technology and continuous self-test – so you always know it’s working
- Upon detection, tip glows and beeper sounds
- CAT IV 1000 V for added protection
- Expanded range: 90 V AC to 1000 V AC
- 20 V to 90 V AC control circuit model also available
- Two-year warranty
- Batteries included
- On/Off Button
- Audible/Silent
Fluke 1AC II A1 VoltAlert Electrical Tester
Fluke 1AC II A1 VoltAlert Electrical Tester
The pocket-sized voltage detector
The next generation Fluke 1AC II A1 VoltAlert Electrical Tester non-contact voltage testers from Fluke are easy to use – just touch the tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, you know there’s voltage present. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits in the workplace or at home.
- Voltbeat™ technology and continuous self-test – so you always know it’s working
- Upon detection, tip glows and beeper sounds
- CAT IV 1000 V for added protection
- Expanded range: 90 V AC to 1000 V AC
- 20 V to 90 V AC control circuit model also available
- Two-year warranty
- Batteries included
- On/Off Button
- Audible/Silent
Fluke 190-102-III ScopeMeter Test Tool
ScopeMeter 190-102-III Test Tool
FREE UPS GROUND SHIPPING
High performance portable oscilloscopes engineered for harsh environments
Fluke 190 Series III ScopeMeter® Test Tools are engineered to go where you go, and tackle just about any troubleshooting job along the way. These CAT III 1000 V/CAT IV 600V rated test tools combine rugged portability with the high performance of bench oscilloscopes to help you take on the challenges of installing, commissioning and maintaining industrial machinery, automation and process controls, and power conversion electronics with ease—from DC to 500 MHz.
Choose from two or four channel models with a wide range of bandwidth options. Fast sampling rates up to 5.0 GS/s, 200 ps resolution and deep memory of 10,000 samples per channel allow high-accuracy capture and display of waveform details, noise, and other disturbances. Perform timing or amplitude related measurements on three phases or three-axis control systems, or simply compare and contrast multiple test points in a circuit under test. Features like TrendPlot™ Paperless Recorder, ScopeRecord™ Mode, Connect-and-View™ Triggering and a unique 100-screen Replay function help you quickly diagnose issues to minimize repair costs and downtime. These features make the oscilloscopes easy to use especially when diagnosing the most difficult problems like complex waveforms, induced noise, intermittent events and signal fluctuations or drift.
- Up to four independent floating isolated inputs, up to 1000 V
- Up to 5 GS/s real time sampling (depending on model and channels used)
- Deep memory: 10,000 points per trace waveform capture (scope mode)
- CAT III 1000 V/CAT IV 600 V safety rated instrument for industrial environments
- Up to seven hours of battery operation using BP291
- Large, bright color display is easy to view in nearly any environment
- Easy to store and view historical data and transfer to a PC via USB or Wifi
- Convenient battery access door for quick battery swaps in the field
- IP51 rating, dust and drip-proof
- Connect-and-View triggering for intelligent, automatic triggering on fast, slow and even complex signals
- Frequency spectrum using FFT-analysis
- Automatic capture and REPLAY of 100 screens
- ScopeRecord mode gives 30,000 points per input channel for low frequency signal analysis
- TrendPlot Paperless Recorder mode with deep memory for long- term automatic measurements
- 5,000 count DMM included in the 2-channel models
- Connect-and-View™ triggering for intelligent, automatic triggering on fast, slow and even complex signals
- Frequency Spectrum using FFT-analysis
- Automatic capture and REPLAY of 100 screens
- ScopeRecord™ Roll mode gives 30,000 points per input channel for low frequency signal analysis
- TrendPlot™ paperless recorder mode with deep memory for long-term automatic measurements
- 5,000 count DMM included in the 2-channel models
- ScopeMeter 190-062-III
- BC190/830 power adapter
- Power cord set
- BP290 Li-ion battery pack
- TL175 test lead set
- VPS421 probe (2x)
- Hand strap
- Hanging strap
- USB-cable
- Printed instructions
Fluke 177 True RMS Digital Multimeter
Fluke 177 True RMS Digital Multimeter
FREE UPS GROUND SHIPPING
Electrician’s Dream!
With its precision, reliability and ease of use, the Fluke 177 True RMS Digital Multimeter is the preferred solution for professional technicians worldwide. Independently tested for safe use in CAT IV 600 V/ CAT III 1000 V environments, the Fluke 177 is the industry standard with all the features you need to troubleshoot and repair many problems in electrical and electronic systems.
The Fluke 177 Digital Multimeter gives you True-rms voltage and current measurements, 6000-count resolution, manual and automatic ranging and provide frequency, capacitance, resistance, continuity and diode measurements. In addition, the Fluke 177 provides higher 0.09% basic accuracy, a digital display with analog bar graph and backlight.
- True RMS voltage and current measurements
- 0.09% basic accuracy
- 6000 count resolution
- Digital display with analog bargraph and backlight
- Manual and automatic ranging
- Display Hold and Auto Hold
- Frequency and capacitance measurements
- Resistance, continuity and diode measurements
- Min-max-average recording
- Smoothing mode allows filtering of rapidly changing inputs
- Easy battery exchange without opening the case
- Closed case calibration through front panel
- Ergonomic case with integrated protective holster
- EN61010-1 CAT III 1000V / CAT IV 600V
- Measures twice as fast as other multimeters
175, 177 & 179 Users Manual
Fluke 175 True RMS Digital Multimeter
Fluke 175 True RMS Digital Multimeter
FREE UPS GROUND SHIPPING
The Baseline for Industrial Measurements
The Fluke 175 True RMS Digital Multimeter is the baseline for professional technicians around the world. With features you need to troubleshoot and repair in electrical and electronic systems, the Fluke 175 CAT IV 600V/CAT III 1000 V digital multimeter provides accurate, True RMS readings through years of reliable service.
Need More Accuracy or Temperature Measurements?
If you need a higher degree of accuracy or contact temperature measurements click here to see Fluke 177 and Fluke 179 True RMS Digital Multimeters at Kiesub Electronics.
- True RMS voltage and current measurements
- 6000 count resolution
- Manual and automatic ranging
- Display Hold and Auto Hold
- Frequency and capacitance measurements
- Resistance, continuity and diode measurements
- Min-max-average recording
- Smoothing mode allows filtering of rapidly changing inputs
- Easy battery exchange without opening the case
- Closed case calibration through front panel
- Ergonomic case with integrated protective holster
- EN61010-1 CAT III 1000V / CAT IV 600V
- Measures twice as fast as other multimeters
175, 177 & 179 Users Manual
Fluke 1550C MegOhmMeter
Fluke 1550C MegOhmMeter
FREE UPS GROUND SHIPPING
The Fluke 1550C is a digital insulation tester capable of testing switchgear, motors, generators and cables at up to 5000 V DC. It can be used for a wide range of tests: from simple spot checks to timed tests and breakdown tests. Measurement storage and PC interface software make it ideal for preventive maintenance. Heavy-duty leads, probes and alligator clips fit in the custom carrying case, for a rugged field testing kit.
- Test voltages of 250V, 500 V, 1000 V, 2500 V, and 5000 V
- Capable of testing in 50V increments between 250V and 1000V and 100V increments between 1000V and 5000V
- Measures 0 to 1 Tera-Ohm
- Warning voltage function alerts the user that line voltage is present and gives the voltage reading up to 600 V AC or DC
- Guard system eliminates the effect of surface leakage current on high-resistance measurements
- Large digital/analog LCD shows detailed measurement data
- Cable or insulation capacitance
- Leakage current
- Ramp function (0-5000 V DC) for breakdown testing
- Timer 1 to 99 minutes
- Polarization index and dielectric absorption calculated automatically
- 99 memory locations store all measurements parameters
- Includes Quicklink 1550B Software and Optical Interface cable
- Two year warranty
Hakko T15-I Conical Solder Tip
Hakko T15-I Conical Solder Tip
Shape: Conical
TIP,CONICAL,R0.2 x 9.5mm,FM-2021,FM-2027
This tip is used with the following Hakko Soldering Stations and Systems:
- Hakko FM-206 3-Port Soldering Station (FM2027 Handpiece)
- Hakko FM-204 Soldering Station
- Hakko FM-203 Soldering Station
- Hakko FX-951 Soldering Station
- Hakko FM-202 Soldering System
- Hakko FP-102 Soldering Station
- Hakko FP-101 Soldering Station
Tip Shape: Conical
This type has a thin conical end and is an ultrafine tip which is best suited for soldering at narrow pitches, etc.
It is the best for soldering micro components such as 0603, etc. and for repairing high-density-mounting P.W.Bs. such as in cellular phones, etc.
How to use the Shape I and examples
HAKKO proposes guidelines on how to select the most suitable tip size.
Kiesub Electronics is a leading distributor of Hakko soldering equipment. Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.