Fluke TL238 SureGrip Test Lead Set for High Energy Environments

The Fluke TL238 SureGrip Test Lead Set for High Energy Environments provide the convenience and variety for test lead configurations by attaching clips, hooks and grabbers as needed in High Energy Environments.

An accessory kit especially designed for working in high energy environments. The SureGrip™ Test Probe has only 4 mm of exposed metal at the tip. Test probes with less exposed metal help reduce the risk of inadvertant shorts between each other and other metal surfaces that could result in an arc flash explosion. Probe extenders fit between modular test leads and test probes, increasing the distance between you and a live circuit by 20.5 cm.

The kit includes:

TP238 SureGrip™ Insulated Test Probe Set
TP280 SureGrip™ Test Probe Extender
TL224 SureGrip™ Silicone Right Angle/Straight Test Lead Set

TP238 and TL224 conform to safety standard IEC 1010-2-031, maximum 1000V CAT III, 600V CAT IV, Pollution Degree 2, 10A

Probe extenders conform to safety standard IEC 1010-2-031, maximum 1000V CAT III, Pollution Degree 2, 10A

Fluke TL224 SureGrip Insulated Test Leads

These insulated Fluke TL224 SureGrip Insulated Test Leads provide convenience and variety for test lead configurations by attaching clips, hooks and grabbers as needed.

SureGrip™ accessories are designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.

Test leads are an integral part of the complete measurement system and extend the capabilities of your digital multimeter. The TL224 SureGrip™ Insulated Test leads offer reinforced strain relief and includes banana jack termination for a variety of test lead configurations. SureGrip™ accessories are designed to improve steadiness in slippery hands. Rubber over molded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.

DMM test leads (red, black) with safety shrouded, standard diameter banana plugs
Right angle connector on one end and straight connector on the other
Reinforced strain relief
1.5 meter silicone-insulated wire resists heat & cold
CAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed
One year warranty

Fluke TL223 SureGrip Electrical Test Lead Set

Test leads are an integral part of the complete measurement system and extend the capabilities of your meter. The Fluke TL223 SureGrip Electrical Test Lead Set is an ideal starter kit for electrical applications. This all in one set includes three test lead accessories with the SureGrip™ design, designed for your comfort so you can focus on taking accurate measurements.

Handy all-in-one kit that includes:

AC220 SureGrip™ Alligator Clip Set
TP1 Slim-Reach™ Test Probes (flat bladed)
TL224 SureGrip™ Silicone Test Lead Set (straight to right)
One year warranty

Fluke TL222 SureGrip Silicone Insulated Test Leads

Fluke TL222 SureGrip Silicone Insulated Test Leads:

DMM test leads (red, black) with safety shrouded, standard diameter banana plugs
Right angle connector on both ends
Reinforced strain relief
1.5 meter silicone-insulated wire resists heat & cold
CAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed
One year warranty

Fluke TL221 SureGrip Test Lead Extension Set

The Fluke TL221 SureGrip Test Lead Extension Set is designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.

One pair (red, black) of silicone insulated leads with straight connectors on both ends
Reinforced strain relief
Includes one pair (red, black) of female couplers
Extends test leads by 1.5 m
600 V CAT IV, 1000 V CAT III, 10 A rating. UL listed
One year warranty

Fluke TL220 SureGrip Industrial Test Lead Set

Fluke TL220 SureGripTM Industrial Test Lead Set

Fluke TL220 SureGrip Industrial Test Lead Set

The Fluke TL220 SureGrip Industrial Test Lead Set is designed to provide a reliable grip in slippery hands, with interchangeable test lead set for multiple electrical applications. Compatible with all instruments and test probes that accept standard 4 mm shrouded banana connectors.

This test lead set with test probes works in multiple electrical applications. SureGrip™ feature is designed to do your work with comfort.

AC220 SureGrip™ Alligator Clip Set
TP220 SureGrip™ Test Probe Set
TL222 SureGrip™ Silicone Test Lead Set (right to right)
One year warranty

Fluke i410 AC/DC Current Clamp

FREE UPS GROUND SHIPPING

The Fluke i410 AC/DC Current Clamp expands the functionality of digital multimeters and measures up to 400 amps for both AC and DC current. The large clamp claw gives you access to difficult to reach areas. The kit includes a handy carrying case.

Battery-powered Hall-effect clamp-on probe measures AC/DC current from 1A to 400A
The i410 is a single range ac/dc current clamp with mV output
The i410 is compatible with most Fluke multimeters or any other current measurement device that accepts safety shrouded banana plugs
One year warranty

i410 Instruction Sheet

Fluke i1010 AC/DC Current Clamp

FREE UPS GROUND SHIPPING

Fluke current clamps extend the current ranges of Fluke tools. The Fluke i1010 AC/DC Current Clamp is highly reliable, measures 1 A to 1000 A and provides accurate current reading without breaking the circuit. This clamp measures both ac and dc current with a large jaw, battery-powered Hall-effect probe that gives access to difficult to reach areas. Compatible with most Fluke multimeters.

Battery-powered Hall-effect clamp-on probe measures ac current to 600A, dc current to 1000A
The i1010 is a single range ac/dc current clamp with mV output
The i1010 is compatible with most Fluke multimeters or any other current measurement device that accepts safety shrouded banana plugs
One year warranty

i1010 Instruction Sheet

Fluke H5 Electrical Tester Holster

Protect your Fluke tools with the Fluke H5 Electrical Tester Holster!

Rugged fabric holster includes flap for lead storage and built-in belt loop
Fits Fluke T3 and T5 testers
One year warranty

Fluke C90 Soft Case for DMM and Visual IR Thermometers

Protect your Fluke tools with the Fluke C90 Soft Case for DMM and Visual IR Thermometers!

Zippered carrying case with inside pocket and belt loop
One year warranty

Fluke C550 Tool Bag

Protect your Fluke tools with the long lasting, durable Fluke C550 Tool Bag!

Steel reinforced frame
Rugged ballistic cloth with heavy duty hardware
Large zippered storage compartment with 25 pockets
Weather resistant
Carry all your tools to the job
One year warranty

Fluke C50 Soft Meter Case

Give your Fluke tools the protection they deserve with the Fluke C50 Soft Meter Case!

Zippered carrying case with inside pocket belt loop and inside meter strap.
One year warranty

Fluke C25 Large Soft Case

Give your Fluke tools the protection they deserve with the Fluke C25 Large Soft Case for DMMs. Protect your meter and conveniently carry it from one job to the next with this handy carrying case!

The C25 carrying case is a durable, zippered carrying case with padding and inside pocket, and high quality polyester exterior. It includes a convenient hand strap and carries most of Fluke’s popular digital multimeters. Our most popular case sold to date!

Zippered carrying case with padding and inside pocket.
One year warranty

Fluke C1600 Gear Box

The C1600 is a rugged, molded plastic case designed to carry Fluke handheld digital multimeters and process calibrators and most accessories used for these meters.

Deep interior large enough to hold and protect your gear and leaves room for accessories and other essentials.
Rubber gasket in lid seals out dust and keeps contents dry.
Lift out tray keeps everything organized.
Snap open compartment on top of lid for easy access to small parts, batteries, probes and leads.
Includes five hook and loop straps to wrap cords and test leads when not in use.
Can be locked.
Large carry handle for comfortable hauling.

C1600 Instruction Sheet

Fluke C125 Meter Case

Fluke C125 Meter Case

Zippered carrying case with detachable external pouch.
Additional pouch is designed to carry test leads and probes.
Convenient belt loop accommodates tool belt.
1 year warranty

Fluke AC285 SureGrip Alligator Clips

Fluke AC285 SureGrip Alligator Clips are designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.

One pair (red, black) of large alligator clips with nickel-plated steel jaws
Multi-purpose tooth pattern grips anything from fine gauge wire to a 20 mm bolt
Recommended for use with TL222 and TL224 test leads
CAT IV 600 V; CAT III 1000 V, 10 A rating. UL listed
One year warranty

Fluke AC220, AC280, AC283 CE Declaration of Conformity

Fluke AC283A SureGrip Pincer Clips

Fluke AC283A SureGrip Pincer Clips

Fluke AC283A SureGrip Pincer Clips designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.

One pair (red, black) of nickel plated pincers open to 5 mm
11.4 cm flexible insulated shaft
Recommended for use with TL222 and TL224 test leads
CAT IV 600 V, CAT III 1000 V, 1 A rating. UL listed
One year warranty

Fluke AC220, AC280, AC283 CE Declaration of Conformity

Fluke AC280 Hook Clips

Fluke AC280 Hook Clips SureGrip™ accessories are designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.

One pair (red, black) of nickel plated clips
Profile narrows to 5.6mm at tip, hook opening 6.4mm at front, 2mm at base
Recommended for use with TL222 and TL224 test leads
CAT IV 600 V, CAT III 1000 V, 3 A rating. UL listed
One year warranty

Fluke AC280 Declaration of Conformity