Bussmann MDA Time Delay Ceramic Tube Fuse

MUST ORDER IN QUANTITIES OF 5

Dimensions	1⁄4˝ x 1 1⁄4˝ (6.35 x 31.75mm)
Volts	250Vac (or less), 125Vdc (20A- 30A)
Amps	1⁄4-30A
IR	35A (1⁄4-1A @250Vac), 100A (11⁄2-2A @ 250Vac), 200A (21⁄2-10A @ 250Vac), 750A (12-15A @ 250Vac), 1500A (20-30A @ 250Vac), 10kA (1⁄4-30A @ 125Vac), 10kA (20-30A @ 125Vdc)
Agency Information	CE, Std. 248-14, UL Listed, Guide JDYX, File E19180, 0-20A CSA Certification, Class 1422-01, File 53787, 0-20A. UL Recognized, Guide JDYX2, File E19180, 25-30A, CSA Component Acceptance, Class 1422-30, 25-30A
Typical Applications	Electronic Circuits
Construction	Ceramic tube with nickel-plated brass endcaps

Bussmann GMD Time Delay Glass Tube Fuse

Bussmann 1.25 AMP Time Delay Glass Tube Fuse, 5mm x 20mm.

MUST ORDER IN QUANTITIES OF 5

Dimensions	5 x 20mm (0.197” x 0.788”)
Volts	250Vac
Amps	125mA-4A
IR	10kA (125mA-3A @125Vac, p.f. = 0.7-0.8), 10kA (4A @ 125Vac,p.f. = 1.0), 35A (125mA-1A @ 250Vac,p.f. = 0.7-0.8), 100A (1.2A-3.A @ 250Vac,p.f. = 0.7-0.8), 200A (4A @ 250Vac,p.f. = 1.0)
Agency Information	CE, UL Listed Guide JDYX, File E19180, 125mA-3A, UL Recognized, Guide JDYX2, File E19180, 4A, CSA Certified, Class 1422-01, File 53787, 0-4A, PSE/JET. File 1641-31003-1001, 1.2A-4A
Typical Applications	Electronic Circuits
Construction	Glass tube, nickelplated brass endcaps

Bussmann GMC Medium Time Delay Glass Tube Fuse

Bussmann Medium Time Delay Glass Tube Fuse, 5mm x 20mm.

MUST ORDER IN QUANTITIES OF 5

Dimensions	5 x 20mm (0.197” x 0.788”)
Volts	250Vac (63mA-3.15A), 125Vac (3.5-10A)
Amps	63mA-10A
IR	35A (63mA- 1A @ 250Vac,p.f. = 0.7-0.8), 10kA (63mA-6A @ 125Vac, p.f.= 0.7-0.8), 100A (1.25-3.15A @ 250Vac,p.f. = 0.7-0.8), 200A (6.3-10A @ 125Vac, p.f.= 1.0)
Agency Information	CE, Std. 248-14, UL Listed Guide JDYX, File E19180, 0-6.3A, UL Recognized, Guide JDYX2, File E19180, 7-8A, CSA Certified, Class 1422-01, File 53787, 0-6.3A
Typical Applications	Electronic Circuits
Construction	Glass tube, nickel-plated brass endcaps

Bussmann GMA Fast Acting Glass Fuses

Bussmann Fast Acting Glass Tube Fuse, 5mm x 20mm.

MUST ORDER IN QUANTITIES OF 5

Bussmann GDB Fast Acting Glass Fuses

Bussmann Fast-Acting Low Breaking Glass Tube Fuse, 5mm x 20mm. It is rated for 250VAC.

MUST ORDER IN QUANTITIES OF 5

Bussmann ATC Fast Acting Blade Fuses

A range of UL Recognized fast-acting ATC blade fuses for automotive and low-voltage control circuits.

Volts	32Vdc
Amps	1-40A
IR	1kA
Agency Information	– UL Recognized File E56412, Guide JFHR2, UL 248-1 (1-40A) – ISO 8820-3 / SAE J1284 / JASO 612 (1-40A) – SAE J1171 (Ignition Protection) (1-4A, 35-40A) – RoHS Compliant – Lead-free – Halogen free
Materials	– Terminals — Tin-plated zinc – Element — Tin-plated zinc – Housing: — 1-4A Polycarbonate, UL 94 Flammability Rating — 5-30A Polyamide, UL 94 Flammability Rating — 35A Polysulfone, UL 94 Flammability Rating — 40A Polyethersulfone, UL 94 Flammability Rating
Environmental	– Operating Temperature Range -40°C to 100°C, 95% RH non-condensing – Storage Temperature Range -5°C to 35°C or lower, 85% RH non-condensing
Typical Applications	– Automotive – Low voltage control circuits

MUST ORDER IN QUANTITIES OF 5

Bussmann ABC Fast Acting Ceramic Fuses

Fast-acting, ceramic tube
Optional axial leads available
1⁄4” x 1 1⁄4” (6.4 x 31.7mm) physical size
Ceramic tube, nickel-plated brass endcap construction
UL Listed product meets standard 248-14
Packaged 5 fuses per box
Minimum order 5 fuses

MUST ORDER IN QUANTITIES OF 5

HDMI to DVI-D Cables, Male to Male

HDMI Male to DVI-D Male Cables

Lengths: 1M (3.3ft), 2M (6.5ft), 3M (9.8ft), 4M (13.1ft), 5M (16.4ft)

Our HDMI to DVI-D single link cables will connect to a DVI-D or DVI-I digital flat panel and home theater devices such as DVD players, set-top boxes, projectors, switches and splitters with HDMI to DVI or vice versa. This premium high performance cable supports HDCP, high-bandwidth, uncompressed video, and has double shielding and 24k Gold connectors which prevents signal loss and screen ghosting for maximum video performance. This cable is compatible with all HDTV resolutions up to 1080p.

NOTE: HDMI-DVI cables are a VIDEO ONLY solution. The audio signal is not transmitted.

Hakko T15-IL Conical Solder Tip

Shape: Conical

This Hakko T15-IL Conical Solder Tip is used with the following Hakko Soldering Stations and Systems: FM-204, FM-203, FX-951, FM-202, FP-102, FP-101

TIP,CONICAL,R0.1 x 12.7mm,FM-2021,FM-2027

This type has a thin conical end and is an ultrafine tip which is best suited for soldering at narrow pitches, etc.

It is the best for soldering micro components such as 0603, etc. and for repairing high-density-mounting P.W.Bs. such as in cellular phones, etc.

How to use the Shape I and examples

Kiesub Electronics is a leading distributor of Hakko soldering equipment. Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.

K07-20257 Player Tracking Cable Aristocrat

K07-20257 Player Tracking Cable Aristocrat:

Communications harness for CDS/Aristocrat sentinel and sentinel II systems

Fluke 715 Volt/mA Calibrator

Fluke 715 Volt/mA Calibrator:

FREE UPS GROUND SHIPPING

The Fluke 715 Volt/ mA Calibrator delivers outstanding performance, durability and reliability. the calibrator is compact, lightweight, and easy to carry.

Measure loop current (0-20 mA, 4-20 mA) signals with very high accuracy of 0.015% and 1 mA resolution
Measure voltage output process signals from PLCs, transmitters
Source or simulate 24 mA loop current
Source voltage to 100 mV or 10V
24V loop supply with simultaneous current measurement
Enhanced voltage and current measure and source accuracy
Improved battery life
250 ohm HART resistor with loop power
Holster features test lead storage
Compatible with toolpack magnetic hanging system
Step and linear ramp output function
Configurable zero and span settings

Fluke 62 MAX Infrared Thermometer

Small in size. Big on toughness.

Why IR Thermometers?

Temperature is often the first indication of potential problems in electrical and mechanical applications. But how can you easily determine if an electrical panel has a hot spot, a motor is overheating or an HVAC system is inefficient? The answer is with an infrared (IR) thermometer. With handheld, non-contact IR thermometers, you can instantly measure equipment temperatures in hard-to-reach or hazardous areas. And with early detection of abnormal temperatures comes early correction of problems.

Fluke 62 MAX and Fluke 62 MAX

Designed with your on-the-job needs in mind, the new Fluke 62 MAX Infrared Thermometer and 62 MAX infrared thermometers are everything you’d expect from the experts in measurement tools. Small in size, extremely accurate and very easy to use. IP54 rated for dust and water resistance. Precise yet rugged enough to take a 3-meter drop. In fact, the 62 MAX and 62 MAX are so tough, they’re the only IR thermometers around you can handle without care.

Single point offset laser sighting
Best accuracy in its class: 1% of reading
Holds temperature readings for 7 seconds
Dual displays shows current and MAX measurements simultaneously
Backlit display for poorly lit areas
Comfortable ergonomic handle with protective rubber boot for added durability
Fitted carrying case
Robust, award winning design
Wide temperature range from -30º to 500ºC (–20º to 932ºF)

62 MAX/62 MAX Users Manual

Fluke 566 Infrared and Contact Thermometer

FREE UPS GROUND SHIPPING

The Fluke 566 two-in-one contact and non contact thermometer can stand up to tough industrial, electrical, and mechanical environments.

Laser guided sighting system for easy targeting with 1 % accuracy
12-point data logging
Advanced optics to measure smaller targets at greater distances
Adjustable emissivity for more accurate temperature measurements
Selectable MAX, MIN, DIF and AVG functions that display values instantly with Hi/Lo Alarm
Expanded measurement range up to 600 ºC (1100 ºF)
Optional probe accessory available for dual contact and non-contact temperature measurements

Energizer EN95 Industrial D Battery, 12/pk

Designed for today’s heavy current or continuous applications
No mercury added.
No special disposal required
Operate well in temperature extremes (-30C – 55C).
Excellent shelf life
Batteries are excluded from free shipping.

Classification: Alkaline
Chemical System: Zinc-Manganese Dioxide (Zn/MnO2)
Designation: ANSI-13A, IEC-LR20
Nominal Voltage: 1.5 volts
Nominal IR: 150 to 300 milliohms (fresh)
Operating Temp: -18°C to 55°C (0°F to 130°F)
Typical Weight: 144.0 grams (5.1 oz.)
Typical Volume: 56.0 cubic centimeters (3.4 cubic inch)
Jacket: Plastic Label
Shelf Life: 10 years at 21°C
Terminal: Flat Contact

Price per box of 12

$1.19 each x box of 12 = $14.28

Energizer EN95 Data Sheet

Our battery pricing is extremely competitive for bulk purchases. Call for quantity pricing & special shipping rates.

Energizer EN93 Industrial C Battery, 12/pk

Long-Lasting Performance in the widest range of devices
Up to 7-year shelf life
1.5 Volt
No added mercury or cadmium
Batteries are excluded from free shipping.

Classification: Alkaline
Chemical System: Zinc-Manganese Dioxide (Zn/MnO2)
Designation: ANSI-14A, IEC-LR14
Nominal Voltage: 1.5 volts
Nominal IR: 150 to 300 milliohms (fresh)
Operating Temp: -18°C to 55°C (0°F to 130°F)
Typical Weight: 66.2 grams (2.3 oz.)
Typical Volume: 26.9 cubic centimeters (1.6 cubic inch)
Jacket: Plastic Label
Shelf Life: 10 years at 21°C
Terminal: Flat Contact

Price per box of 12

$.84 each x box of 12 = $10.08

Energizer EN93 Data Sheet

Our battery pricing is extremely competitive for bulk purchases. Call for quantity pricing & special shipping rates.

CAT5E Patch Cable Snagless Molded, Black

Lengths: 1ft, 3ft, 5ft, 7ft, 10ft, 14ft, 25ft, 50ft, 75ft, 100ft

CAT 5E 350 MHz Patch Cable designed for high performance in a CAT5E link. CAT 5E Patch Cable with snagless, molded strain relief boots. Standard T568B wiring. These cords meet ISO/IEC 11801, EIA/TIA 568B CAT 5E standard verified. Black.

Ripoffs CO-175 EMT/Tool Holster

The CO-175 is a 9 Pocket Carry-All for EMT’s

Fits EMT Tools and Accessories
Carry Scissors, Flashlights, Multi-tools, Gloves, Stethoscope and more.
TOOLS NOT INCLUDED!

Techspray 1631-16S Flux Remover G3

In-store pickup or local delivery only.

16oz. Flux Remover, Aerosol. This innovative solvent blend of Honeywell’s HFC-245fa and 1,2-trans-dichloroethylene is a direct replacement for solvents containing HCFC-141b. Designed specifically for removing R, RA, RMA, and SA type flux residues after high temperature reflow. Can be used as an all-purpose cleaner to remove light oils, silicones, waxes, greases, and similar contaminants often found in electronics manufacturing. Non-ozone depleting. Non-flammable. Safe on most plastics. Rapidly evaporating.