Tripplite PV1800HF PowerVerter 1800W Compact Inverter

Tripplite PV1800HF Power Inverter

Compact case, permanent mount, 12V DC, user supplied cables.

Allows users to run AC appliances from any properly-sized 12V battery or automotive DC system
Converts 12V DC battery power to 120V AC power
1800 watts continuous output; 3000 watts peak output power
3 outlets
Ultra compact, lightweight design with all-metal housing
Diagnostic LED indicates low battery-voltage
Low battery alarm with auto-shutoff prevents deep battery discharge
High-efficiency operation conserves batteries to prolong run time
Lighted power switch

Bussmann MDL Slow-Blow Glass Fuses

MDL Fuses – Slow Blow Type

Glass tube with nickel-plated brass end caps
1/4-in diameter x 1-1/4-in length
Dual-element, slow blowing type to prevent needless fuse blows
Various amperages
250Vac (1⁄16-8A), 32Vac (9-30A)
Made in the USA
Packaged 5 fuses per box
Minimum order 5 fuses

MUST ORDER IN QUANTITIES OF 5

Energizer L91BP4 Photo Lithium Batteries

Lithium-ion AA Battery
Weigh 1/3 less than standard alkaline batteries
Perform in extreme temperatures from -40°F to 140°F
15 year storage life
Leak resistant construction

Classification: “Cylindrical Lithium”
Chemical System: Lithium/Iron Disulfide (Li/FeS2)
Designation: ANSI 15-LF, IEC-FR6
Nominal Voltage: 1.5 Volts
Compatible With: EA91, E91, NH15, 1215
Storage Temp: -40°C to 60°C (-40°F to 140°F)
Operating Temp: -40°C to 60°C (-40°F to 140°F)*
Typical Weight: 14.5 grams (0.5 oz.)
Typical Volume: 8.0 cubic centimeters (0.49 cubic inch)
Max Discharge: 3.0 Amps Continuous (single battery only) 5.0 Amps Pulse (2 sec on / 8 sec off)
Max Rev Current: 2 uA
Lithium Content: Less than 1 gram
Typical IR: 60 to 210 milliohms (depending on method)
Shelf Life: 20 years at 21°C

Energizer L91BP4 Data Sheet

K902-106 All White LED Replacement Board for Denom Panel on IGT GK Upright or I-Game Slot Machines

Replaces the five existing lamps in denom display panel. All white LEDs. Drop-in replacement of incandescent lamps in Gameking upright or I-Game machines. Operates on standard 13.5 volt system and is configured with connector that matches original design to make this a “plug and play” device. 3 easy steps: Remove lamps and sockets from the existing PCB, peel the double-sided tape from new board, and press new board in place over old board. Plug board in.

Made in USA

Denom arrow

3 year warranty.

K902-105W White/Yellow LED Replacement Board for Denom Panel on IGT GK Upright or I-Game Slot Machines

Replaces the five existing lamps in denom display panel. White LEDs in top, three others yellow. Drop-in replacement of incandescent lamps in Gameking upright or I-Game machines. Operates on standard 13.5 volt system and is configured with connector that matches original design to make this a “plug and play” device. 3 easy steps: Remove lamps and sockets from the existing PCB, peel the double-sided tape from new board, and press new board in place over old board. Plug board in. Call or email for quantity pricing.

Made in USA

Denom arrow

3 year warranty.

Hakko FX-791 Nitrogen Controller

FREE UPS GROUND SHIPPING

The compact FX-791 Nitrogen Controller is a flowmeter for N₂ soldering iron with flow control valve and regulator.

Controls the flow of nitrogen to the FM-2026 nitrogen iron with the FM-202 and FP-102 soldering stations
Controls the flow level from 0.25 l/min to 2.5 l/min. (recommended level 0.5 – 1.5 l/min.) and should be adjusted to the tip shape
ESD Safe

Kiesub Electronics is a leading distributor of Hakko soldering equipment. Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.

Hakko FX-780 Nitrogen Generator

Hakko FX-780 Nitrogen Generator

FREE UPS GROUND SHIPPING

The Hakko FX-780 Nitrogen Generator generates Nitrogen gas at max. concentration of 99.9 and provides N₂ gas by compressed air which does not need an electric power supply. Large-capacity type accepts 2 soldering irons.

Concentration of generated air = 99.9%
Concentration of generated N2 gas = 98%
Generator can be placed perpendicularly or horizontally
Part Number: FX780-01 (sold separately, NOT included with FM2026-KIT)

Nitrogen Generation

Hakko FT-700 Tip Polisher

FREE UPS GROUND SHIPPING

The Hakko FT-700 Tip Polisher is the ideal maintenance kit to renew oxidized soldering iron tips, especially when soldering with Lead-Free alloys.

FAST and EASY way to keep your soldering iron tips clean and free from oxidation
Two spinning polishing brushes (brushes will not damage tip plating)
Lead-free chemical paste for immediate tip tinning
ESD safe by desigm

Total Power Consumption: 120V – 430W
Pump Type: Diaphragm pump
Pump Capacity: 5 to 20 l/min. (max)
Control Temperature: 100 to 420

Hakko FM2026-KIT N2 Soldering System

FREE UPS GROUND SHIPPING

bnr_n2_250x51

NOTE:

Used together with HAKKO FM-202, FM-203, FM-204, FM-205, FX-950, FX-951 and FX-952

FM-2026-KIT includes FM2026-01 (Iron) and FX791-01 (Controller) ONLY – It does not include the FM202 Solder Station or the FX780!

The Hakko N2 soldering system is the ideal solution for all your LEAD-FREE hand-soldering applications. The bench-top FX-780 Nitrogen Generator creates nitrogen gas from filtered, dry compressed air and the FX-791 Nitrogen Controller and FM-2026 Soldering Iron delivers it efficiently and uniformly to the soldering area.

NOTE: If you do NOT have nitrogen availability at your work station, the compact FX-780 Generator is the best bang for your buck.

Compact FX-791 Nitrogen Controller
Controls the flow of nitrogen to the FM-2026 nitrogen iron with the FM-202 and FP-102 soldering stations
Controls the flow level from 0.25 l/min to 2.5 l/min. (recommended level 0.5 – 1.5 l/min.) and should be adjusted to the tip shape
ESD-safe

FM-2026 N2 Soldering Iron (for the FM-202 and FP-102 solder stations)
Supplies hot nitrogen (N2) gas to the soldering area
The nitrogen gas is preheated as it passes along the ceramic heater in the FM-2026 handpiece
Soldering efficiency can be improved as the hot nitrogen creates a preheating effect while reducing the amount of oxygen in the solder connection area (less oxidation)

Fluke 117 True-RMS Multimeter

FREE UPS GROUND SHIPPING

The compact Fluke 117 true RMS digital multimeter is optimized to help you keep commercial buildings, hospitals and schools running right.

The advanced features of the Fluke 117 help you get the job done, quickly and safely. Integrated non-contact voltage detection helps you identify energized circuits. The AutoV/LoZ function prevents false readings caused by ghost voltage. The Fluke 117 delivers true-rms ac voltage and current readings with 6000-count resolution. It provides Min/Max/Average readings and measures frequency and capacitance. The battery door is easy to access, so you and your Fluke 117 can stay on the job.

Fluke 117 multimeters are independently tested for safe use in CAT III 600V environments.

- VoltAlert™ technology for non-contact voltage detection
- AutoVolt automatic ac/dc voltage selection
- Low input impedance: helps prevent false readings due to ghost voltage
- Large white LED backlight to work in poorly lit areas
- True-rms for accurate measurements on non-linear loads
- Measures 10 A (20 A overload for 30-seconds)
- Resistance, continuity, frequency and capacitance
- Min/Max/Average with elapsed time to record signal fluctuations
- Compact ergonomic design for one-handed operation
- Compatible with optional magnetic hanger (ToolPak™) for hands free operation
- CAT III 600 V safety rated
AutoVolt/LoZ
VoltAlert

Case: C90

Fluke 116 HVAC Multimeter

Fluke 116 HVAC Multimeter

FREE UPS GROUND SHIPPING

The Fluke 116 digital multimeter delivers the capabilities professionals demand to troubleshoot and repair HVAC (heating, ventilation and air conditioning) systems. It has everything you need in an HVAC meter, including temperature and microamp measurements to help you quickly troubleshoot problems with HVAC equipment and flame sensors.

The Fluke 116 comes with the Fluke 80BK-A integrated DMM temperature probe. The microamp function allows flame sensor measurement down to 0.1 microamps. The AutoV/LoZ function prevents false readings caused by ghost voltage. The Fluke 116 also has a large white LED backlight for work in poorly lit areas. It measures resistance, continuity, frequency, and capacitance and provides Min/Max/Average readings with elapsed time to record signal fluctuations.

Fluke 116 multimeters are independently tested for safe use in CAT III 600V environments.

Built-in thermometer for HVAC applications
Microamps to test flame sensors
Low input impedance: helps prevent false readings due to ghost voltage
Large white LED backlight to work in poorly lit areas
Resistance, continuity, frequency and capacitance
Min/Max/Average with elapsed time to record signal fluctuations
Compact ergonomic design for one-handed operation
Compatible with optional magnetic hanger (ToolPak™)
CAT III 600 V safety rated

Fluke 115 True-RMS Multimeter

FREE UPS GROUND SHIPPING

With its simple operation, compact design and ease of use, the Fluke 115 True RMS digital multimeter provides the perfect answer for general purpose electrical and electronic test requirements. The Fluke 115 displays True RMS voltage and current readings with 600 count resolution, continuity and capacitance, making it perfect for quick verifications and field service use. Fluke 115 Digital Multimeters are independently tested for safe use in CAT III 600V Environments.

Large white LED backlight to work in poorly lit areas
Resistance and continuity
Frequency and capacitance
Maximum Voltage ac/dc 600V
10A ac/dc current measurement (20 A overload for 30-seconds max)
Min/Max/Average to record signal fluctuations
CAT III 600 V safety rated

Safety conformance

All inputs are protected to CE, IEN61010-1 CAT III 600V. UL, CSA, TÜV listed and VDE.

Specifications
Maximum voltage between any terminal and earth ground	600 V
Surge protection	6 kV peak per IEC 61010-1 600 VCAT III, Pollution Degree 2
Display	Digital: 6,000 counts, updates 4 per second
Bar graph	33 segments, updates 32 per second
Operating temperature	-10 °C to 50 °C
Storage temperature	-40 °C to 60 °C
Battery type	9 volt Alkaline, NEDA 1604A/ IEC 6LR61
Batterylife	400 hours typical, without backlight
Accuracy Specifications
DC millivolts	Range/Resolution	600.0 mV / 0.1 mV
DC millivolts	Accuracy	± ([% of reading] [counts]): 0.5% 2
DC volts	Range/Resolution	6.000 V / 0.001 V 60.00 V / 0.01 V 600.00 V / 0.1 V
DC volts	Accuracy	± ([% of reading] [counts]): 0.5% 2
AC millivolts¹ True RMS	Range/Resolution	600.0 mV / 0.1 mV
AC millivolts¹ True RMS	Accuracy	1.0 % 3 (dc, 45 Hz to 500 Hz) 2.0 % 3 (500 Hz to 1 kHz)
AC volts¹ True RMS	Range/Resolution	6.000 V / 0.001 V 60.00 V / 0.01 V 600.0 V / 0.1 V
AC volts¹ True RMS	Accuracy	1.0 % 3 (dc, 45 Hz to 500 Hz) 2.0 % 3 (500 Hz to 1 kHz)
Continuity	Range/Resolution	600 Ω / 1 Ω
Continuity	Accuracy	Beeper on < 20 Ω, off > 250 Ω; detects opens or shorts of 500 μs or longer.
Ohms	Range/Resolution	600.0 Ω / 0.1 Ω 6.000 kΩ / 0.001 kΩ 60.00 kΩ / 0.01 kΩ 600.0 kΩ / 0.1 kΩ 6.000 MΩ / 0.001 MΩ
	Accuracy	0.9 % 1
	Range/Resolution	40.00 MΩ / 0.01 MΩ
	Accuracy	5 % 2
Diode test	Range/Resolution	2.00 V / 0.001 V
Diode test	Accuracy	0.9% 2
Capacitance	Range/Resolution	1000 nF / 1 nF 10.00 μF / 0.01 μF 100.0 μF / 0.1 μF 9999 μF / 1 μF 100 μF to 1000 μF
	Accuracy	1.9% 2
	Range/Resolution	> 1000 μF
	Accuracy	5% 20%
Lo-Z capacitance	Range	1 nF to 500 μF
Lo-Z capacitance	Accuracy	10% 2 typical
AC amps True RMS (45 Hz to 500Hz)	Range/Resolution	6.000 A / 0.001 A 10.00 A / 0.01 A
AC amps True RMS (45 Hz to 500Hz)	Accuracy	1.5% 3 20 A overload for 30-seconds max
DC amps	Range/Resolution	6.000 A / 0.001 A 10.00 A / 0.01 A
DC amps	Accuracy	1.0% 3 20 A overload for 30-seconds max
Hz (V or A input)²	Range/Resolution	99.99 Hz / 0.01 Hz 999.9 Hz / 0.01 Hz 9.999 kHz / 0.001 kHz 50 kHz / 0.01 kHz
Hz (V or A input)²	Accuracy	0.1% 2
Notes: ¹ All AC voltage ranges except Auto-V/LoZ are specified from 1 % to 100 % of range. Auto-V/LoZ is specified from 0.0 V. ² Frequency is AC coupled, 5Hz to 30 kHz for AC voltage. • Temperature uncertainty (accuracy) does not include the error of the thermocouple probe. • Frequency is AC coupled, 5 Hz to 50 kHz for AC voltage. Frequency is DC coupled, 45 Hz to 5 kHz for AC current. • Temperature Range/Resolution: -40 °F to 752 °F / 0.2 °F.
Mechanical & General Specifications
Size	167 x 84 x 46 mm (6.57″ x 3.31″ x 1.82″)
Weight	550 g
Warranty	3 years

E73 Mini Indicator Lamp

E73 Indicator Lamp

Sub-Mini Wedge Base
T-1 1/2 Bulb
14 Volts
C-2F filament

MUST ORDER IN BOX OF 10

CO-2/6 CO2 Replacement Cartridges 6/pk

NOTE: In store pickup or ship by UPS Ground only IMPORTANT NOTE: Liquefied gas under pressure will naturally produce a “cold effect” when discharged. Unlike large aerosol canisters, the CO2 (with the 12 gram cartridge) is a very tiny unit and does not have the same surface area to dissipate the cold as large units, so it is important to follow the CO2’s operating instructions; DO NOT FULLY DEPRESS THE TRIGGER. ONLY USE QUICK, SHORT BURSTS. By doing so you will reduce the “cold effect” and keep the output pressure as high as possible.

C02 Replacement Cartridges

A high velocity, residue free stream of gas, perfect for cleaning cameras, camcorders, electronics, musical instruments, sewing machines, electric razors, smoke detectors and much more. Additionally, carbon dioxide gas will not break down delicate lubricants, inks and dyes.

The CO-2/6 must be used with the CO-2. Do not use gas cylinders designed for use with BB guns. These cylinders contain lubricating oils that will permanently contaminate the valve and nozzle as well as damage the equipment being cleaned! Therefore, only use AMERICAN RECORDER TECHNOLOGIES branded cylinders.

NOT FOR USE WITH THE NEW C0-2016, which only takes 16 gram cartridges.

Hakko CHP-170 Clean Cut Micro Cutter

Hakko CHP-170 Clean Cut Micro Cutter

The Hakko CHP-170 Clean Cut Micro Cutter is an excellent general use wire cutting tool suitable for a wide range of applications, including cutting LED strips. Note: Max cut is determined with copper wire.

Clean cut micro cutter
Steel: 2.5 mm
Cut: Flush
Max cut: 16 AWG
Handle: NA
Rockwell Hardness (RHC): 56
View spec

68-170

Pelican 1495CC1 Laptop Computer Case

1495CC1 Laptop Case
Interior Dimensions:
18.87″ x 13.12″ x 3.81″ (47.9 x 33.3 x 9.7 cm)

Fits up to 17″ laptops
3 dial combination lock included
Nylon padded computer sleeve and accessories pouch
Lid organizer, shock absorbing tray, and padded shoulder strap
Fold down overmolded handle
Easy open Double Throw latches
Automatic Pressure Equalization Valve
Stainless steel padlock protectors
Lifetime Guarantee of Excellence
Watertight, crushproof, and dust proof
Combination Lock Information

CERTIFICATES

1495_DEF_STAN_81-41.pdfDOWNLOAD

1495_IP67.pdfDOWNLOAD

Extech 407730 Digital Sound Level Meter

Digital Sound Level Meter

±2dB accuracy with 0.1dB resolution
A&C weighting
AC analog output
Record Max/Min values over time
Auto power off and Max Hold functions
Utilizes 0.5″(12.7mm) condenser microphone
Tripod mountable
40 to 130dB measuring range
Fast/slow response time
Tripod mountable

Applications:

Monitoring workplace machinery
Installing audio and alarm systems
Product noise certification and reduction

Extech 407026 Heavy Duty Light Meter

FREE UPS GROUND SHIPPING!

Heavy Duty Light Meter with PC Interface

Enhance accuracy by selecting one of four lighting types plus PC interface

Microprocessor assures maximum accuracy plus special functions
Super large 1.4″ LCD display
% displays differential from reference point
ZERO Re-Calibration
Utilizes precision photo diode and color correction filter
Cosine and color corrected measurements
±4% accuracy is enhanced by selecting lighting type
Record/Recall MIN, MAX, and AVG readings
Data Hold plus Auto shut off
Built-in RS232 serial interface, optional software