DVI-D Dual Link Cables, Male to Male

Lengths: 2M (6.56ft), 3M (9.84ft), 4M (13.12ft), 5M (16.4ft)

The DVI-D dual link cable can be used to connect your flat panel digital monitor, digital CRT display, projector, HDTV, etc., with the DVI-D (or DVI-I) port to a DVI-D (or DVI-I) port on your source device.
The dual link cable doubles the power of the transmission increasing the speed and quality of the signal.

HDMI Female to DVI-D Male Adapter

HDMI Female to DVI-D Male Adapter

45-5126 VGA to 5 BNC Male Cable, 1ft

HD15 Male to 5 BNC Males, Gold Plated

1′ Breakout Cable
Shielded RGB Video Cable

RGB Video Cable 5 BNC to 5 BNC Cable

6ft, 12ft

Component Video Cable 5 BNC Male to 5 BNC Male

Shielded RGB 75 Ohm Cable
Gold BNC Male Connectors
Color Coded Ends

RGB-HDTV Cable 3 BNC to 3 BNC Cable

6ft, 12ft

RGB-HDTV Component Video Cable (3 BNC)

Shielded
Gold Plated BNC Connectors
Color Coded

Component Video Cable 3RCAs to 3-RCAs

Lengths: 3′, 6′, 12′, 25′, 50′

DVD Component Video Cable 3 RCA Male to 3 RCA Male

For TV and DVD Players Equipped with Component Video Jacks
3 Color Coded RCA Male Connectors at Each End

HDMI/DVI Pushbutton Selector Switch

For connecting two digital input devices, such as a DVD and a set-top satellite box, to one HDTV. Inputs can be either two HDMI or two DVI or one of each to an HDMI or DVI output. Audio may be handled separately via single digital RCA audio jack or two (left and right) conventional stereo jacks. Saves a lot of cable switching when you want to use more than one input device with one HDTV monitor. Easy operation.

44-535 2 In 1 Component/Composite A/V Selector

Switching For Up To Five Accessories To One HDTV

A/V Selector One:

Input: 3 Component Video & 3 Stereo Audio on RCA Connectors
Output: 1 Component Video & Stereo Audio on RCA Connectors Plus 3.5MM jackA/V Selector Two:
2 S-Video Inputs (4 Pin Mini-Din)
2 Composite Video Inputs on RCA Connector
2 Stereo Audio Inputs on RCA Connectors
1 S-Video Output on 4 Pin Din Connector
1 Composite Video Output on RCA Connector
1 Stereo Audio Output on RCA Connectors
No Power is Required.
75 Ohm Integrity is Maintained Throughout
A Nice Looking Black Finish that will Sit Comfortably on Flat Surfaces.

Techspray 1610-G4 Isopropyl Alcohol 99.8% 1 GAL

Techspray 1610-G4 Isopropyl Alcohol 99.8% 1 GAL

One Gallon Plastic Bottle

Sold individually

4 per case.

1-3 $49.94

4 $46.46

Store pickup or local delivery only.

99.8% Pure Anhydrous Isopropyl Alcohol
Excellent for Tape Head Cleaning
Defluxing
Stencil Cleaning
Fiber Optic Cleaning
Other Light Cleaning

Techspray 1610-50PK Alcohol Pre-Saturated Wipes 50 Pack

50 Individually wrapped Wipes in Dispenser Box

Low Linting Wipes
Pre-Saturated with 99.8% Pure IPA

TECHSPRAY Isopropyl Alcohol is 99.8 % pure, anhydrous isopropanol for all-purpose cleaning. Excellent for tape head cleaning, removal of fluxes, light oils, polar soils, and white mineral residue. Can be used as a thinner for most fluxes.
Features

Non-Ozone Depleting
Safe on Plastics
Rapidly Evaporating
Zero Residue
Non-Corrosive

Platinum Tools 100054C EZ-RJPRO HD Crimp Tool

The EZ-RJPRO® HD Crimp Tool is designed for the professional installer providing a ratcheted, high leverage, ultra stable platform for consistent, repeatable terminations. This heavy duty tool is the perfect solution when working with high performance, larger OD cables that are tougher to terminate due to larger wire gauges, thicker, harder insulation on the conductors and pair separating splines. Not only will you overcome these connectivity obstacles but you can be assured that every termination will meet FCC specifications. Compatible with all EZ-RJ45® and EZ-RJ12/11 connectors as well as all standard modular plugs, except AMP.

Zero flex frame prevents torque loss during the crimping cycle.
Tool steel die head assembly provides 360 degree of connector support during crimp.
Clean, ultra flush trim on the EZ-RJ45® extended conductors.
Expanded surface area on contact drivers delivers full, uniform crimp force.
Built in wire cutter and strippers.

Platinum Tools EZ-RJ12/11 Connectors

Platinum Tools EZ-RJ12/11 Connectors

100026C 50/pk

100026B 100/Box

105005 500/bulk

The EZ-RJ12/11 Connector simplifies twisted pair terminations by allowing the wires to be inserted through the connector and out the front. This allows the technician to easily verify the proper wiring order prior to termination. Use the EZ-RJPRO HD™ Crimp Tool (P/N 100054) or EXO Crimp Frame® with EZ-12/11 Die (100061 & 100073C) for single cycle crimping and trimming of the excess wire. FCC compliant and UL rated. Made in the USA.

For use in telephone & security installations.
Faster, easier terminations with reduced scrap.
For specialized telephone installations & communications equipment.
For applications requiring custom/specific wire configurations.
Works on solid or stranded wire.
Designed for 6, 4, and 2 conductor applications.

Platinum Tools 100011C EZ-RJ45 CAT6/6 Connectors with Strain Relief

30 connectors & 30 strain reliefs

The new patented EZ-RJ45 Cat 6 Connector simplifies twisted pair terminations by allowing the wires to be inserted through the connector and out the front. This allows the technician to easily verify the proper wiring order. Electrical performance of the termination is optimized by pulling the connector down over the cable jacket and seating it tightly in the rear of the connector. By reducing the distance between the wire twists and contacts, performance is optimized! Crimp with the patented EZ-RJ45 Crimp Tool… crimps and trims in one cycle. (See Part Number 100 004 or 100 054 EZ-RJPRO HD). Manufactured in the USA. Patented.

For use in Cat 6 compliant data networks.
Category 6 performance per EIA/TIA B.2. FCC compliant, UL rated. RoHS compliant
EZ to verify wire sequence. Simple one piece design…no bars or liners.
Works with solid or stranded wire.
Faster terminations with reduced scrap.
Max Cable OD: 6.60mm (0.260″); Max Conductor OD: 1.10mm (0.041″)

Platinum Tools 100004C EZ-RJ45 Crimp Tool

This high quality crimp tool is designed to quickly crimp and cut the wires of the EZ-RJ45® Connector in one easy simple operation! The ratcheted straight action crimping motion ensures a uniform crimp every cycle. Features precision cast crimping dies for superior accuracy. Built in wire cutter and stripper for silver satin. All steel frame with rust resistant black oxide finish.

Crimps and trims extended wire in EZ-RJ45® Connector in a single cycle. (EZ-RJ12/11® requires manual trimming)
For use with EZ-RJ45® Cat 5/5e & Cat 6 Connectors.
Will also work on most other RJ-11, RJ-12 and RJ-45 connectors. (Except AMP)
Patented

SC-ST Singlemode Duplex Fiber Optic Jumpers

Kiesub’s fiber jumpers are manufactured to the highest of quality standards, and are rigorously tested to ensure reliability and performance. All types and lengths of fiber jumpers are in stock or can be custom-made and shipped quickly. Contact us for custom fiber jumpers. Competitive pricing and quick turnaround.

ST-ST Singlemode Duplex Fiber Jumpers

ST-ST Multimode Duplex Fiber Optic Jumpers

SC-ST Multimode Duplex Fiber Optic Jumpers