PA1461 D-sub 4 Indent Crimper 20-12 AWG

Replaces obsolete PA1441
Upgraded existing crimpers with dual-durometer ProGrips and internal improvements for greater reliability and precision.
Adjustable Pin Height Locator.
20-12 AWG (.50-4.0mm2)

Orion OA825AP-11-1WB 80 x 25mm Fan, 115AC

80 x 80 x 25mm

Axial

Operating Voltage:	115 VAC
Nominal Height:	80 MilliMeters
Nominal Width:	80 MilliMeters
Nominal Depth:	25 MilliMeters
Air Flow:	25 CFM
Connection Type:	Wire Leads
Bearing Type:	Ball
Power Consumption:	9 Watts
Fan Speed:	3,000 RPM
Noise Level:	28 dB
Tachometer Output:	No
Impeller Material:	Plastic
Operating Temp Range (F):	-4~176
RoHS:	Yes
Approvals:	ULR;cULR;TUV
Picture No.:	fans_ta_orin_80sqx25_wire
H x W x D (in.):	3.15” x 3.15” x 1.0”

Hosa MCH-125 Hi-Z Microphone Cable, 25ft.

Hosa MCH-125 Hi-Z Microphone Cable, 25ft.:

HOSA HI Z MIC CABLE XLR/F TO 1/4M PHONE
XLR Female – Phono Male – 25ft

Conductor(s): 22 AWG x 2 OFC
Connector(s): Hosa XLR3F to 1/4 in TS
Shield: 88% OFC Braid

MIC CABLES

Hosa MCH-110 Hi-Z Microphone Cable, 10ft.

Hosa MCH-110 Hi-Z Microphone Cable, 10ft.:

HOSA HI Z MIC CABLE XLR/F TO 1/4M PHONE
XLR Female – Phono Male – 10ft

Conductor(s): 22 AWG x 2 OFC
Connector(s): Hosa XLR3F to 1/4 in TS
Shield: 88% OFC Braid

MIC CABLES

K630-TPA LED Replacement Board for Ticket Printer Arrow on IGT Slant or Bar Top Slot Machines

Minimum order quantity 100 pcs. We cannot take orders for less than 100 pcs.

LED Replacement Board for Ticket Printer Arrow on IGT Slant or bartop Slot Machines

Made in USA

Call or email for quantity pricing. 3 year warranty.

K628-BVD-C LED Replacement Board for Bill Validator on IGT Bar Top Slot Machines

K628-BVD-C LED Replacement Board for Bill Validator on IGT Bar Top Slot Machines

LED Replacement Board for Bill Validator on IGT bartop Slot Machines

Replaces the yellow LED board in newer bar tops. Call or email for quantity pricing.

Made in USA

3 year warranty.

K621-BVD LED Replacement Board for Bill Validator on IGT Slant Top Slot Machines (Yellow/Green LEDs)

K621-BVD LED Replacement Board for Bill Validator on IGT Slant Top Slot Machines

Replaces plastic light board holder & board for IGT Slant Top slot machines.
Yellow & green LEDS.
All white LEDs available: p/n K621-BVD-W. Call or email for quantity pricing.

3 year warranty.

ECG J025 25-Watt Soldering Iron

Temperature reaches 464 degrees F
Quick heat up time
Quick heat-recovery
Long life soldering tip

Fluke i2500-18 iFlex

FREE UPS GROUND SHIPPING

The new Fluke i2500-18 iFlex flexible current probes expand the measurement range of select Fluke meters to 2500 A ac while providing ultimate measurement flexibility. The iFlex probes connect directly to the meter, displaying current measurements without error prone scaling factors. The 1.8 m (6 ft) cord allows separation between the measurement location and the clamp meter making it easier to view the display. The large loop size and thin cross section allow measurement of awkward sized conductors and improved wire access in crowded spaces.
Expands the measurement range to 2500 A AC while providing increased display flexibility, Ability to measure awkward sized conductors and improved wire access
CAT IV 600 V, CAT III 1000 V

Features and Benefits

Expands the measurement range to 2500 A AC while providing increased display flexibility, Ability to measure awkward sized conductors and improved wire access
CAT IV 600 V, CAT III 1000 V
7.5 mm coil diameter allows measurement in tight spaces
Ergonomic design allows easy operation with one hand
1.8 m (6 ft) Cable
Three-year warranty

i2500-18/i2500-10 Quick Reference Guide

Fluke i2500-10 iFlex

FREE UPS GROUND SHIPPING

Be Ready for Anything

The Fluke i2500-10 iFlex flexible current probes expand the measurement range of the select Fluke meters to 2500 A AC while providing the ultimate measurement flexibility. The iFlex^® probes connect directly to the meter, displaying current measurements without error prone scaling factors. The 1.8 m (6 ft) cord allows separation between the measurement location and the clamp meter making it easier to view the display. The large loop size and thin cross section allow measurement of awkward sized conductors and improved wire access in crowded spaces. Available in 25 cm (10 in) and 45 cm (18 in) sizes.

Expands the measurement range to 2500 A AC while providing increased display flexibility, Ability to measure awkward sized conductors and improved wire access
CAT IV 600 V, CAT III 1000 V

7.5 mm coil diameter allows measurement in tight spaces
Ergonomic design allows easy operation with one hand
1.8 m (6 ft) Cable
Three-year warranty

i2500-18/i2500-10 Quick Reference Guide

Hosa HSS 1/4″ to 1/4″ Stereo Cables

Hosa HSS 1/4″ to 1/4″ Stereo Cables

3ft, 5ft, 10ft, 30ft, 50ft

Designed to interconnect pro audio gear with balanced phone jacks. It is ideal for use in touring and other live-sound applications. Features include:

Nickel-plated REAN plugs for efficient signal transfer and rugged durability
Oxygen-Free Copper (OFC) conductors for enhanced signal clarity
OFC spiral shield for effective EMI and RFI rejection and flexibility

Conductor(s): 24 AWG x 2 OFC
Connector(s): REAN 1/4 in TRS to Same
Shield: 90% OFC Spiral

NTE HG-300D 350W Mini Heat Gun

Miniature 350 Watt Heat Gun

2 Speed/Temperature Settings
Features Quitet Operation
250 Degree C (Low) / 350 Degree C (High)
Comfortable & Lightweight
Safety Shield on the Nozzle
Built-in Bracket for Self-Support and Table Top Use.

Kiesub Electronics:

If you are looking for best electronic product distributor providing effective equipment’s and accessories with satisfying service and affordable rates then Kiesub Electronics will offer fulfilling services to you.

Kiesub Electronics is well known and growing firm for wholesale distributor for electronics appliances and devices in Nevada. We will provide best electronics equipment, parts or accessories which will suit customer’s requirement. We provide various products such as wires and cables, audio equipment, batteries, fiber optic products, flashlights, fuses, switches, power supplies and power products, various tools and tool sets and more such products which are needed for various purposes. We are largest distributor of Batteries and Battery Backup products.

We are leading wholesaler firm for electronics products distributor providing finest and quality service to consumer. Here you will get variety of electronic product with best of market price. Here on our website we have listed our entire product along with description and specification, If you still have any query regarding product or not getting what you exactly needed just give us a Call or E- Mail Us. We will reach out to you as customer satisfaction is our prime motto behind our wholesale distributor service.

Hakko FM206-DTS 3-Port Rework Station

FREE GROUND SHIPPING!
FM-206 Desoldering Rework Station with FM-2022 Tweezer, FM-2024 Desoldering and FM-2027 Soldering Irons

Hakko FM206-DTS Features:

The Hakko FM-206 3-Port Rework Station can power any Hakko FM Series handpiece, thus offering the ability for you to tailor the station to fit your specific rework needs. The station’s sleek, compact design minimizes loss of bench space and its powerful ports allow the use of the Hakko FM-2029 single hot air handpiece, and the Hakko FM-2030 heavy duty soldering iron, making this the ultimate rework station.
• Graphic User Interface for easy setup and operation
• 3 simultaneous powered ports
• Self-contained pump for vacuum and air flow
• Digital airflow indicator
• Configurable display in °C or °F
• High performance hot air handpiece ramps up to max temp in < 20 secs
• Capable of hot air rework of 0201, 01005 and up to 10x10mm QFNs
• Meets or exceeds ANSI J-STD-001
• Manual or Automatic profile for hot air
• Auto shutoff with sleep function
• Passcode protected
• Security lock to protect against theft or unauthorized re-location
• Integrates with the Hakko FR-830 and FR-870 Preheaters
• Low cost composite hot air nozzles
• Desoldering delay timer
• Optional footswitch for pump operation
• Option for external gas supply for hot air
• ESD safe by design

• NOTE: Tips and Nozzles are NOT included with station or any configuration. Must order separately.

The Hakko FM206-DTS configuration contains:

(1) FM-2024 desoldering tool (FM2024-42 Kit) Order N3 nozzles here
(1) FM-2022 Parallel Remover (FM2022-05 Kit)
(1) FM-2027 soldering iron (FM2027-06 Kit) Order T15 tips here
• FM206-55 station is included.

Kiesub Electronics is a leading distributor of Hakko soldering equipment. Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.

Hakko FM-206-DSS 3-Port Rework Station

FREE UPS GROUND SHIPPING

The Hakko FM206-DSS configuration contains:

(1) FM-2024 desoldering tool (FM2024-42 Kit)
(2) FM-2027 soldering irons (FM2027-06 Kit)
• FM206-55 station is included.

• Graphic User Interface for easy setup and operation
• 3 simultaneous powered ports
• Self-contained pump for vacuum and air flow
• Digital airflow indicator
• Configurable display in °C or °F
• High performance hot air handpiece ramps up to max temp in < 20 secs
• Capable of hot air rework of 0201, 01005 and up to 10x10mm QFNs
• Meets or exceeds ANSI J-STD-001
• Manual or Automatic profile for hot air
• Auto shutoff with sleep function
• Passcode protected
• Security lock to protect against theft or unauthorized re-location
• Integrates with the Hakko FR-830 and FR-870 Preheaters
• Low cost composite hot air nozzles
• Desoldering delay timer
• Optional footswitch for pump operation
• Option for external gas supply for hot air
• ESD safe by design

NOTE: Tips and Nozzles are NOT included with station or any configuration

Click here for N3 nozzles for the included FM2024 Desoldering Tool

Click here for T15 tips for the included FM2027 Soldering Irons

Fluke 381 Remote Display True RMS AC/DC Clamp Meter with iFlex®

Fluke 381 Remote Display True RMS AC/DC Clamp Meter

FREE UPS GROUND SHIPPING

Be ready for anything.

Fluke 381 Remote Display True-rms AC/DC Clamp Meter with iFlex : The Fluke 381 is the first clamp meter with a detachable, remote display and iFlexTM flexible current probe for easier, faster, safer measurements. Be ready for anything. The new Fluke 381 does everything you would expect from a clamp meter, and then lets you remove the display for even more flexibility. Now one technician can do jobs that used to require two people. Clamp the Fluke 381 around a conductor, remove the display and walk across the room to operate controls or remove protective equipment, all while watching real-time readings. The new iFlex flexible current probe (included) expands the measurement range to 2500 A ac while providing increased display flexibility, ability to measure awkward sized conductors and improved wire access.

Wireless technology allows the display to be carried up to 30 ft. away from the point of measurement for added flexibility without interference with measurement accuracy
The removable magnetic display can be conveniently mounted where it is easily seen
iFlex flexible current probe expands the measurement range to 2500 A acCAT IV 600 V, CAT III 1000 V
Integrated low pass filter and state of the art signal processing allows for use in noisy electrical environments while providing stable readings
Proprietary inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it
Ergonomic design fits in your hand and can be used while wearing protective equipment
Radio transmitter automatically sets the correct measurement range so you do not need to change the switch positions while taking a measurement
Three-year warranty

Soft carrying case
Safety Conformance IEC/EN 61010-1:2001, 1000V CAT III, 600V CAT IV

Specifications
Diameter of measurable conductor	1.3” or 34 mm max
Operating temperature	-14 to 122ºF (-10 to 50ºC)
Storage temperature	-40 to 140ºF (-40 to 60ºC)
Operating humidity	< 90% @ 10 to 30 ºC, < 75% @ 30 to 40ºC
Operating altitude	0 to 2000 m
Size	277 x 88 x 43 mm, (10.905 x 3.464 x 1.629 in.)
Weight	350g, (12 oz.)
Temperature coefficient	0.01% ºC (< 18ºC or > 28ºC)
Warranty	Three years for electronics One year for cable and clamp assembly

381 Data Sheet

Fluke 375 FC True-rms AC/DC Clamp Meter

Fluke 375 FC True-rms AC/DC Clamp Meter

FREE UPS GROUND SHIPPING

With true-rms ac voltage and current measurements, the Fluke 375 FC 600A True-rms AC/DC Clamp Meter can read up to 600 V and 600 A in both ac and dc modes, and is capable of frequency measurement up to 500 Hz. Additionally, the 375 FC is compatible with the new iFlex flexible current probe (sold separately), which expands the measurement range to 2500 A ac.

The 375 FC directly replaces the Fluke 375.

Features:

Log and trend measurements to pinpoint intermittent faults.
Transmit results wirelessly via Fluke Connect Measurements app.
Create and send reports right from the field.
Stay safely away from the arc flash zone through Bluetooth connectivity to Apple and Android device.
Read measurements on your phone at a safe distance, wearing less PPE while your meter takes all the risks
Record results directly to your phone and the Cloud
Capture intermittent faults while performing other tasks using the logging capabilities of the Fluke 375 FC
Create and share reports from the field via email, or converse in real-time with ShareLive™ video calls
Compatible with iFlex flexible current probe; use to expand the measurement range to 2500 A ac; provides access to large conductors in tight spaces
Compatible with TPAK magnetic hanging strap
Integrated VFD low pass filter for accurate motor drive measurements
Proprietary inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it
CAT IV 600 V, CAT III 1000 V safety rating
Three-year manufacturer warranty
Soft carrying case included

374 FC/375 FC/376 FC Users Manual

Fluke 374 FC True-rms AC/DC Clamp Meter

Fluke 374 FC True-rms AC/DC Clamp Meter

FREE UPS GROUND SHIPPING

The Fluke 374 FC AC/DC Clamp Meter offers advanced troubleshooting performance and is now part of the Fluke Connect family of wireless test tools.

The Fluke 374 FC directly replaces the Fluke 374 Clamp Meter.

Features:

Trend measurements and pinpoint intermittent faults by connecting your meter to your phone via Fluke Connect® Measurements app.
Transmit results wirelessly via Fluke Connect® Measurements app
Create and send reports right from the field
Stay safely away from the arc flash zone through Bluetooth connectivity to Apple and Android devices
Connect your meter to your smartphone with Fluke Connect Measurements.
Read measurements on your phone at a safe distance, wearing less PPE while your meter takes all the risks.
Record results directly to your phone and the Cloud.
Create and share reports from the field via email, or converse in real-time with ShareLive™ video calls.
Compatible with iFlex flexible current probe; use to expand the measurement range to 2500 A ac; provides access to large conductors in tight spaces.
Compatible with TPAK magnetic hanging strap.
Proprietary inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it.
CAT IV 600 V, CAT III 1000 V safety rating.
Three-year manufacturer warranty.
Soft carrying case.

374 FC/375 FC/376 FC Users Manual

Fluke 373 True RMS AC/DC Clamp Meter 600A

FREE UPS GROUND SHIPPING

Be ready for anything.

The new Fluke 373 True RMS AC/DC Clamp Meter 600A offers improved performance, perfect for many ac only current measurement situations. With true-rms ac voltage and current measurements, the Fluke 373 reads up to 600 A ac and 600 V ac or dc.

Featuring True RMS AC voltage and current measurements, and resistance measurement up to 6000 Ω with continuity detection, the Fluke 373 is everything you need, plus a little more.

600 A ac current measurement with fixed jaw
600 V ac and dc voltage measurement
True-rms ac voltage and current for accurate measurements on non-linear signals
Resistance measurement to 6000? with continuity detection
1000 ?F capacitance measurement
State of the art signal processing allows for use in noisy electrical environments while providing stable readings
Large, easy to read, backlight display automatically sets the correct measurement range so you do not need to change switch positions while taking a measurement
CAT IV 300 V, CAT III 600 V safety rating
Three-year warranty
Soft carrying case

373 Users Manual