NTE 54-003 SWITCH TOGGLE DPDT 15A ON-NONE-ON 125VAC
NTE 54-003 SWITCH TOGGLE DPDT 15A ON-NONE-ON 125VAC
NTE 54-003 SWITCH TOGGLE DPDT 15A ON-NONE-ON 125VAC
NTE 54-002 SWITCH TOGGLE SPDT 15A Momentary(On)-Off-Momentary(On) 125VAC
NTE 54-002 SWITCH TOGGLE SPDT 15A Momentary(On)-Off-Momentary(On) 125VAC
SWITCH TOGGLE SPDT 15A (ON)-OFF-(ON) 125VAC
View Specs
NTE 54-001 SWITCH TOGGLE SPST 15A ON-NONE-(OFF) 125VAC
NTE 54-001 Switch Toggle SPST 15A ON-NONE-OFF 125VAC:
SWITCH TOGGLE SPST 15A ON-NONE-(OFF) 125VAC
Prime EC502608 Extension Cord, 16/3 SJTW 8ft.
Prime EC502608 Extension Cord, 8ft.
8ft. 16/3 SJTW Black Cord
Features
- Water Resistant
- Flame Retardant
- Ultra Flexible
- Abrasion Resistant
- Nickel-Coated Brass Blades Resist Corrosion
Specifications
- Length (ft):8
- Color:Black
- Gauge:16/3
- Wire Type:SJTW
- Certifications:cULus or equivalent
- Electrical Ratings:13A/ 125V/ 1625W
Bussmann AGX Fast Acting Glass Fuse
Bussmann AGX Fast Acting Glass Fuse
MUST ORDER IN QUANTITIES OF 5
| Dimensions | 1⁄4” x 1” (6.4 x 25.4mm) |
| Volts | 250Vac (1⁄200-10A), 32Vac (15-30A) |
| Amps | 1⁄200-30A |
| IR | 35A (1⁄200-1A @ 250Vac), 100A (1-1/4-3A @ 100Vac), 200A (4-10A@250Vac) 1000A (15-30A @ 32Vac) See data sheet for more ratings |
| Agency Information | CE, Std. 248-14, UL File E19180 UL Listed, Guide JDYX, 0-5A UL Recognized, Guide JDYX2, 6-20A CSA File 53787; Class 1422-01 |
| Typical Applications | Electronic Circuits |
| Construction | Glass Tube |
FUSES
Bussmann AGW Very Fast-Acting, Current-Limiting Fuses
Bussmann AGW Very Fast-Acting, Current-Limiting Fuses
MUST ORDER IN QUANTITIES OF 5
| Dimensions | 1⁄4” x 7⁄8” (6.4 x 22.2mm) |
| Volts | 32Vac |
| Amps | 1-30A |
| IR | 1000A |
| Typical Applications | Electronic Circuits |
| Construction | Glass Tube |
Bussmann AGA Fast Acting Glass Fuses
Bussmann AGA Fast Acting Glass Fuses:
MUST ORDER IN QUANTITIES OF 5
| Dimensions | 1⁄4” x 5⁄8” (6.4 x 15.9mm) |
| Volts | 125Vac (or less) |
| Amps | 1-30A |
| IR | 10kA (1-11⁄2A @ 125Vac), 200A (2-5A @ 125Vac), 1000A (6-30A @ 32Vac) |
| Agency Information | CE, Std. 248- 14, UL File E19180, UL Listed, Guide JDYX 0-11⁄2A UL Recognized, Guide JDYX2 2-12A |
| Typical Applications | Electronic Circuits |
| Construction | Glass Tube |
Hakko T15-BC28 Solder Tip
Hakko T15-BC28 Solder Tip:
T15-BC28
TIP,BEVEL,2.8mm/60° x 17.6mm,FM-2027
T15 Series Composite Tip
This solder tip is used with the following Hakko Soldering Stations and Systems:
- Hakko FM-206 3-Port Soldering Station (FM2027 Handpiece)
- Hakko FM-204 Soldering Station
- Hakko FM-203 Soldering Station
- Hakko FX-951 Soldering Station
- Hakko FM-202 Soldering System
- Hakko FP-102 Soldering Station
- Hakko FP-101 Soldering Station
Tip Shape: Bevel
This type has a shape like a cone or column cut at a slant, which allows users to select the cut surface size depending on the workpiece.
It is used for drag soldering and pre-tinning of lead wires.
How to use the Shape BC/C and examples
Difference between BC/C and BCF/CF tip shape
HAKKO proposes guidelines on how to select the most suitable tip size.
Kiesub Electronics is a leading distributor of Hakko soldering equipment. Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.
Hakko T15-JS02 Solder Tip
Hakko T15-JS02 Solder Tip
T15-JS02
TIP,BENT,R0.2mm/30° x 1.6mm x 7.9mm,FM-2027
T15 Series Composite Tip
This tip is used with the following Hakko Soldering Stations and Systems:
- Hakko FM-206 3-Port Soldering Station (FM2027 Handpiece)
- Hakko FM-204 Soldering Station
- Hakko FM-203 Soldering Station
- Hakko FX-951 Soldering Station
- Hakko FM-202 Soldering System
- Hakko FP-102 Soldering Station
- Hakko FP-101 Soldering Station
Tip Shape: Bent
This type differs from Shape B and I by bending the tip end and is capable of soldering by applying the tip in 2 ways: face and point.
It is used for drag soldering and correction of bridging.
How to use the Shape J and examples
HAKKO proposes guidelines on how to select the most suitable tip size.
Kiesub Electronics is a leading distributor of Hakko soldering equipment. Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.
Klein Tools 32477 10-in-1 Screwdriver/Nut Driver
Klein Tools 32477 10-in-1 Screwdriver/Nut Driver
Contains: 5/16” and 1/4” nut drivers, #1 and #2 Phillips, 1/4” and 3/16” slotted, T10 and T15 TORX®, #1 and #2 square-recess
Cushion-Grip handle for greater torque and comfort.
End of handle is marked to quickly identify tool.
Features 5/16” (8 mm) & 1/4” (6 mm) nut drivers, #1 and #2 Phillips, 1/4” (6 mm) & 3/16” (5 mm) slotted, T10 & T15 TORX®, and #1 and #2 square-recess.
The following replacement bits are available: see Cat. No. 32482 (#1 Phillips & 3/16” [5 mm] Slotted), Cat. No. 32483 (#2 Phillips & 1/4” [6 mm] Slotted), Cat. No. 32484 (#1 Square & #2 Square), and Cat. No. 32485 (T10 Torx® & T15 Torx®).
Cat5E Cable, 1000′ Pull Box
Cat5E Cable, 1000′ Pull Box
Blue, gray, green, orange, purple, red, white, yellow, black
Category 5E UTP 350MHz Enhanced Cable
- Quality CAT5E specifications
- 350MHz
- 24AWG Solid Cable
This cable consists of 8 solid 24 AWG paired wires and comes in a 1000-foot pull-out box.
UL Listed
- ETL Listed Type CMR
- C(ETL) listed CMG FT4
- ETL Verified to TIA – 568-C.2, and ISO/IEC 11801
- ROHS Compliant
- ATM 155 Mbps
- Ethernet 10BASE-T, 100BASE-TX, 100BASE-VG, 100BASE-T4
- 1000 Mbps 1000BASE-T Gigabit Ethernet™ (IEEE 802.3)
- 16 Mbps Token Ring™ (IEEE 802.5)
- (Does not qualify for free freight)
- View specifications
Bussmann AGC Fast Acting Glass Fuses
Bussmann AGC Fast Acting Glass Fuses
| Construction | Glass tube with nickelplated brass endcaps. |
| Agency Information | CE, Std. 248-14, UL Listed, Guide JDYX, File E19180, 0-10A UL Recognized, Guide JDYX2, File E19180, 15-30A CSA Certification, Class 1422-01, File 53787. |
MUST ORDER IN QUANTITIES OF 5
2:1 Ratio Heat Shrink Tubing, 4ft. Lengths – Violet
2:1 Ratio Heat Shrink Tubing, 4ft. Lengths – Violet:
1/16″, 3/32”, 1/8”, 3/16”, 1/4”, 3/8”, 1/2″, 3/4″, 1”
Our heat shrink is a flexible polyolefin tubing that offers an outstanding balance of electrical, physical and chemical properties for a wide variety of industrial and military applications. Our tubing is typically used as shrink-fit electrical insulation over cable splices and terminations. It is also used for lightweight wire harness covering, wire marking, wire bundling, component packaging and fire resistant covering.
- 125 deg. C
- 600V
- Thin wall
- 2:1 ratio
- Color: Violet
Heatshrink
2:1 Ratio Heat Shrink Tubing, 4ft. Lengths – Yellow
2:1 Ratio Heat Shrink Tubing, 4ft. Lengths – Yellow :
1/16″, 3/32”, 1/8”, 3/16”, 1/4”, 3/8”, 1/2″, 3/4″, 1”, 1-1/2”, 2″
Our heat shrink is a flexible polyolefin tubing that offers an outstanding balance of electrical, physical and chemical properties for a wide variety of industrial and military applications. Our tubing is typically used as shrink-fit electrical insulation over cable splices and terminations. It is also used for lightweight wire harness covering, wire marking, wire bundling, component packaging and fire resistant covering.
- 125 deg. C
- 600V
- Thin wall
- 2:1 ratio
- Color: Yellow
NTE Heatshrink Tubing Technical Brochure
Heatshrink
2:1 Ratio Heat Shrink Tubing, 4ft. Lengths – White
2:1 Ratio Heat Shrink Tubing, 4ft. Lengths – White
1/16″, 3/32”, 1/8”, 3/16”, 1/4”, 3/8”, 1/2″, 3/4″, 1”, 1-1/2”, 2″
Our heat shrink is a flexible polyolefin tubing that offers an outstanding balance of electrical, physical and chemical properties for a wide variety of industrial and military applications. Our tubing is typically used as shrink-fit electrical insulation over cable splices and terminations. It is also used for lightweight wire harness covering, wire marking, wire bundling, component packaging and fire resistant covering.
- 125 deg. C
- 600V
- Thin wall
- 2:1 ratio
- Color: White
Heatshrink
2:1 Ratio Heat Shrink Tubing, 4ft. Lengths – Green
2:1 Ratio Heat Shrink Tubing, 4ft. Lengths – Green
1/16″, 3/32”, 1/8”, 3/16”, 1/4”, 3/8”, 1/2″, 3/4″, 1”, 1-1/2”, 2″
Our heat shrink is a flexible polyolefin tubing that offers an outstanding balance of electrical, physical and chemical properties for a wide variety of industrial and military applications. Our tubing is typically used as shrink-fit electrical insulation over cable splices and terminations. It is also used for lightweight wire harness covering, wire marking, wire bundling, component packaging and fire resistant covering.
- 125 deg. C
- 600V
- Thin wall
- 2:1 ratio
- Color: Green
NTE Heatshrink Tubing Technical Brochure
2:1 Ratio Heat Shrink Tubing, 4ft. Lengths – Clear
2:1 Ratio Heat Shrink Tubing 4ft. Lengths | Clear:
1/16″, 3/32”, 1/8”, 3/16”, 1/4”, 3/8”, 1/2″, 3/4″, 1”, 1-1/2”, 2″
Our heat shrink is a flexible polyolefin tubing that offers an outstanding balance of electrical, physical and chemical properties for a wide variety of industrial and military applications. Our tubing is typically used as shrink-fit electrical insulation over cable splices and terminations. It is also used for lightweight wire harness covering, wire marking, wire bundling, component packaging and fire resistant covering.
- 125 deg. C
- 600V
- Thin wall
- 2:1 ratio
- Color: Clear
NTE Heatshrink Tubing Technical Brochure
Heatshrink
2:1 Ratio Heat Shrink Tubing, Spool – Red
2:1 Ratio Heat Shrink Tubing, Spool – Red
3/64”, 1/16”, 3/32”, 1/8”, 3/16”, 1/4”, 3/8”, 1/2″, 3/4″, 1”, 1-1/2”, 2”
Color: Red
Our heat shrink is a flexible polyolefin tubing that offers an outstanding balance of electrical, physical and chemical properties for a wide variety of industrial and military applications. Our tubing is typically used as shrink-fit electrical insulation over cable splices and terminations. It is also used for lightweight wire harness covering, wire marking, wire bundling, component packaging and fire resistant covering.
NTE Heatshrink Tubing Technical Brochure
HEATSHRINK