THAW ACC-0008 Rechargeable Heated Scarf 2.0

THAW ACC-0008 Rechargeable Heated Scarf 2.0

The THAW Heated Scarf was purposefully designed to deliver rapid warmth and superior comfort in cold conditions more effectively than the average scarf or collar on a coat. Much like the cooling effect of an ice pack on the neck during hot weather, our scarf optimally targets this same area with heat in cold weather conditions for a soothing warming effect. The reason this works is because the brainstem resides in this part of the neck, and it is responsible for helping you to sense and regulate your body temperature. Powered with an included 5000mAh power bank, the scarf has 3 heat modes reaching up to 131°F (55°C) and a max run time of 8 hours, so you’ll be able to dial in your comfort level and adapt to changing environments without having to take a break from the cold. The fleece liner is comfortable against your skin while the down insulates and the exterior nylon shell provides wind and water-resistance. The interlocking design keeps the scarf perfectly in place, and easily adjusts to accommodate all sizes. Experience the ultimate cold-weather companion that not only shields you from the icy wind but also taps into your body’s natural warmth mechanisms for maximum coziness.

DETAILS

• Heated Neck Zone
• 3 Heating Modes
• Heats up to 140°F (60°C)
• Provides Up To 8 Hours of Heat
• Fleece Interior Liner
• Insulated Synthetic Down
• Nylon Exterior Shell
• Interlocking Design
• Power Storage Pocket
• Push-button Temperature Control
• Powered by a 5000mAh Power Bank
• USB-C Rechargeable
• Air Travel Ready
• One-Size Fits All
• Machine Washable (Gentle/Delicate Cycles Only)
• Color: Black

HEATED NECK ZONE

Experience the ultimate cold-weather companion that not only shields you from the icy wind but also taps into your body’s natural warmth mechanisms for maximum coziness.

3 HEATING MODES
Up to 131°F (55°C) / 6 Hours of Run Time
Up to 122°F (50°C) / 7 Hours of Run Time
Up to 113°F (45°C) / 8 Hours of Run Time

With 3 heat modes reaching up to 131°F (55°C) and a max run time of 8 hours, you’ll be able to dial in your comfort level and adapt to changing environments without having to take a break from the cold.

AIR TRAVEL READY

There’s no need to leave your heated scarf and power bank at home when you travel since they meet the TSA & FAA regulations as approved carry-on items.

IMPORTANT: The final decision rests with the TSA officer on whether any item is allowed through the security checkpoint. Please see TSA to check and verify all requirements and regulations.

Included Accessories:
1x 5000mAh Power Bank
1x USB-A to USB-C Charging Cable

THAW Rechargeable Heated Glove

Nothing keeps you from enjoying the outdoors more than cold hands. Our Rechargeable Heated Gloves keep you moving freely with individual, full-finger heating and convenient touchscreen compatibility to make sure your hands aren’t stuck in your pockets, even on the coldest days.

Click Here For Sizing Chart

MODES
· High (131°F / 55°C): 2.5 hours
· Medium (113°F / 45°C): 5 hours
· Low (95°F / 35°C): 8 hours

FEATURES
· Rechargeable
· I.G.N.I.T.E™ Tech Heating
· 3M™ THINSULATE™ Insulation
· Water-Repellent Exterior Shell
· Touchscreen Compatible
· Zippered Battery Compartment
· Adjustable Wrist Strap
· LED Power Button with Mode Indicator

SIZE
· Small (Length: 7.08″ x Circumference: 8.3″)

· Medium (Length: 7.57″ x Circumference: 8.8″)

· Large (Length: 8.18″ x Circumference: 9.4″)

· X-Large (Length: 8.88″ x Circumference: 10.1″)

MATERIALS
· Shell: 80% Polyester, 15% Nylon, 5% Spandex
· Lining: 100% Polyester
· Filling: 70% Polyester, 30% Olefin

ACCESSORIES
· USB-A to Dual DC Charging Cable
· (2) 2200mAh Batteries

THAW Rechargeable Men’s Heated Vest

The Rechargeable Heated Vest provides four strategically placed heating zones to keep your core warm and comfortable, even in the coldest conditions. With three adjustable heating modes, you can customize your warmth while staying stylish.

Click Here For Sizing Chart

MODES
· High (131°F / 55°C): 3 hours
· Medium (113°F / 45°C): 6 hours
· Low (95°F / 35°C): 9 hours

FEATURES
· USB-C Rechargeable
· I.G.N.I.T.E.™ Tech Heating
(Integrated Graphene Nano Insulated Thermal Element)
· 4 Targeted Heat Zones
· Zipper Closure / Cinch Bottom Cords
· Water-Repellent Outer Shell
· LED Power Button with Mode Indicator
· Machine Washable

SIZE
· Small (Back: 26.3″ Chest: 42.1″ Hip: 41″)

· Medium (Back: 26.8″ Chest: 45.3″ Hip: 44″)

· Large (Back: 27.5″ Chest: 48″ Hip: 46.8″)

· X-Large (Back: 28.3″ Chest: 51.8″ Hip: 52″)

· XX-Large (Back: 29.1″ Chest: 54.7″ Hip: 55″)

MATERIALS
· Shell: Nylon
· Lining/Fill: Polyester
· Neck/Pockets: Fleece

ACCESSORIES
· Power Bank (7.4V, 5,000mAh, 37Wh)
· USB-A to USB-C Charging Cable
· USB-A to USB-C Adapter

TRUE BERM Keychain Knife

Sometimes the most useful knife in your collection isn’t the biggest, it’s the one that is most easily accessible day in and day out. The ultra-compact BERM Keychain Flipper achieves maximum portability without compromising usability, featuring a carabiner, reversible clip, and a ball bearing pivot system which makes this knife as easy to deploy as it is to carry.

TRUE FMK-0004 Pocket Knife

Pocket Knife, 3-1/4 in L Blade, Stainless Steel Blade, Ergonomic Handle

Chances are you’re not going to need to cut a seat belt or break a car window to free yourself. But you can’t deny the feeling of confidence from being prepared. The EDC knife with its 3-1/4 in steel blade and emergency glass breaker on the handle give you that confidence. Plus, with a quick flip of your thumb, you can instantly lock the black oxidized, stainless steel blade into place for all of your everyday carry cutting needs. More like an extension of your hand, the ergonomic handle of the EDC Knife helps give you a secure grip for greater precision and effectiveness. The titanium coating on the stainless steel handle resists scratches, corrosion and has the right amount of heft to it for using the emergency glass breaker. You can even reverse or remove the pocket clip to better suit your carry style.

Blade Finish	Black-Oxide
Blade Length	3-1/4 in
Blade Material	Stainless Steel
Blade Type	Drop-Point
Closed Length	4-3/4 in
Handle Material	Stainless Steel
Handle Type	Ergonomic
Includes	Glass breaker and Lanyard Hole
Lock Type	Frame
Overall Length	8 in

TRUE FMK-0006 Ball Bearing Flipper Knife

Admit it, opening a knife with one hand and just the flick of your finger feels, sounds and looks amazing. The Ball Bearing Flipper Knife with its 3” drop point blade is ready in the wink of an eye and the satisfying “click” lets you know you’re locked and ready to solve the task at hand.

With a slim profile and lightweight design, the Ball Bearing Flipper Knife slips into and out of your pocket with ease, and the deep-carry pocket clip keeps the knife secure until you need it.

One-Handed Wonder

A knife that allows you to open it with one hand is a godsend when you have a lot on your hands. With a simple flick, the Ball Bearing Flipper Knife is ready when you need it without causing you to drop what you’re doing.

DESIGN

Blade Shape: Drop Point Blade
Length: 3”
Blade Steel: 8Cr13MoV Stainless Steel
Blade Finish: Black Oxide
Locking Mechanism: Liner lock
Handle: G10
Features a lanyard hole

TRUE FMK-0007 MAAR Cleaver Flipper Knife

The MAAR™ knife epitomizes TRUE’s call to “Take a Firm Grip” by providing the every-day carry enthusiast with an assertive, bold and uncompromising design that succeeds where small, minimalist knives fall short. It is an oversized, yet pocketable knife that boasts heft, strength, and full grip ergonomics in a responsive, flipper design. The shape of the blade spine and handle scale is a nod to its namesake, the volcanic crater-like maar landform produced by Mother Nature’s intense heat and strength. The knife features tough D2 steel that holds a sharp edge and requires less frequent sharpening. The black oxide coating enhances the corrosion resistance and the stonewash finish provides a matte look that hides scratches and is low maintenance. The modified cleaver blade is designed to excel at cutting, slicing and chopping, yet it has as modified point for piercing that traditional cleavers lack. The broad 3.5” edge works great for common slicing tasks and the belly of the blade has a rocker design allowing it to easily rock and chop. Whether you choose the MAAR for everyday carry (EDC), general utility uses or for personal-defense applications, you’ll appreciate the versatility and the knife envy it is sure to generate as you confidently cut, slide, and chop your way through daily tasks.

DESIGN

• Blade Shape: Modified Cleaver
• Blade Length: 3.5”
• Blade Material: D2 Steel
• Blade Finish: Black Oxide + Stonewash
• Handle Material: G10
• Handle Color: Black
• Open Mechanism: Fast Flip On-hand Deployment
• Locking Mechanism: Liner Lock
• Pocket Clip: Reversable 2-Position Carry Pocket Clip (Tip Up Right / Tip Up Left)
• Integrated Lanyard Loop

D2 STEEL

Trusted for years as a tool-grade steel due to its high hardness, tough wear-resistance, and corrosion resistance. The high-carbon, high- chromium composition helps the MAAR to hold a sharp edge and requires less frequent sharpening than lower-grade steels.

MAAR™ KNIFE SERIES

The family of MAAR™ flipper knives epitomizes TRUE’s call to “Take a Firm Grip” by providing the every-day carry enthusiast with an assertive, bold, and uncompromising design that succeeds where small, minimalist knives fall short. It promises to generate a fair amount of knife envy as you confidently cut, slide, and chop your way through daily tasks.

The sturdy D2 steel and concave shape if the blade spine and scale is a nod to its namesake, the volcanic crater-like maar landform produced by Mother Nature’s intense heat and strength.

BLACK OXIDE + STONEWASH FINISH

The black oxide coating not only looks great, but it helps improve abrasion and corrosion resistance. The stonewash finish provides a matte look that hides scratches, is low maintenance and preserves its original look over time.

OPERATION

Opening the Knife
To deploy the blade, apply forceful pressure on the flipper tab.

Closing the Knife
Push the lock arm over to the side so that it clears the base of the blade. Carefully rotate the blade into the closed position

FAST FLIP ONE-HAND DEPLOYMENT

The MAAR includes our Fast Flip (pivot washer and steel ball-bearing) design for simple, one- hand opening and lightning-fast deployment.

LINER LOCK

The liner lock is super strong so you can have peace of mind that the knife blade is securely deployed for your cutting tasks, but when it comes time to fold blade you can easily do so with one- hand.

2-WAY CARRY POCKET CLIP

The pocket clip helps to easily conceal the knife and the 2-position configuration allows you to carry the knife in a right-handed tip up or left- handed tip up position according to your personal preference.

(The clip is installed in the right-handed tip up position at the factory.)

TRUE FMK-0010 Swift Edge 3.5″ G10 Handle Knife

When the task at hand calls for a quick and sharp solution, respond with versatility that gets the job done. The Swift Edge Replaceable Blade Knife from TRUE answers the call for a knife that’s always at the ready.

The Swift Edge is a 3.5”, fast flip cutting tool that allows you to easily replace blades on the go. Our patent-pending two-step blade release system makes it simple to swap out a dull blade or switch to a different style, depending on your needs. The Swift Edge comes with four blades: one tanto, two drop points, and one saw to make this knife a truly versatile asset in your daily life.

Stay Sharp Without Ever Having to Sharpen

Sometimes you just don’t have the time to stop what you’re doing to sharpen your knife blade. And, you’ve probably heard that using a dull knife is more dangerous than a sharp knife. The Swift Edge replaceable blade knife allows you to quickly change out your blade and keep working. Plus, the included blade case allows you to conveniently store and access your drop point, tanto, and saw blades. So, leave the sharpening stone at home and just replace a blade on the Swift Edge when you instantly want to keep a keen edge.

DESIGN

BLADE SPECS

3.5” Partially Serrated Tanto: Black Oxide Coated 5Cr13 Steel
3.5” Drop Point (2): Black Oxide Coated 5Cr13 Steel
3.25” Saw: Titanium Nitride Coated 65Mn Steel

HANDLE SPECS

G10 Composite Handle
Two-Step Replaceable Blade System
Lanyard Compatible
Ball Bearing Flipper
Toggle Lock
4 Position Pocket Clip

ACCESSORIES

1 Tanto blade
1 Saw blade
2 Drop Point blades
1 Blade case

Product Manual

View / Download

TRUE FXK-0001 Fixed Blade Knife

No gimmicks. No flash. Just a 4-inch task knife engineered for long-lasting use as a tactical asset. The TRUE Fixed Blade Knife was specifically designed for experienced outdoorsmen and EDC enthusiasts who demand gear designed to deliver an outstanding performance.

Holy MOLLE

The utility and usefulness of the MOLLE system can’t be denied. The holes on the Fixed Blade Knife sheath enable it to be easily incorporated into your MOLLE mounted carry system. The sheath also lends itself for scout carry and drop-leg use. It even features a vertical belt loop that allows the sheath to be carried on the right or left hip.

DESIGN

Blade Shape: Drop Point
Blade Length: 4”
Blade Steel: 8Cr13MoV Stainless Steel Blade
Finish: Black Oxide
Handle: TPR with Glass Breaker Pommel

ACCESSORIES

Molded Sheath with Nylon Loop Adapter

TRUE TU6871 TRUEBLADE

The TRUEBLADE is a lightweight, everyday carry pocket knife with a 2.75” partially serrated, black oxidized, 420 grade stainless steel blade. The handle is crafted from a stainless steel frame with anodized aluminum scales to keep its design lightweight and minimal. This knife features a pocket clip making it the perfect companion for any task.

DESIGN

Blade Shape: Clip Point
Blade Length: 2.75”
Blade Edge: Partially-serrated
Blade Steel: 420 Stainless Steel
Blade Finish: Black Oxide
Locking: Liner Lock
Handle: Anodized Aluminum

Fluke 115 True-RMS Multimeter

FREE UPS GROUND SHIPPING

With its simple operation, compact design and ease of use, the Fluke 115 True RMS digital multimeter provides the perfect answer for general purpose electrical and electronic test requirements. The Fluke 115 displays True RMS voltage and current readings with 600 count resolution, continuity and capacitance, making it perfect for quick verifications and field service use. Fluke 115 Digital Multimeters are independently tested for safe use in CAT III 600V Environments.

Large white LED backlight to work in poorly lit areas
Resistance and continuity
Frequency and capacitance
Maximum Voltage ac/dc 600V
10A ac/dc current measurement (20 A overload for 30-seconds max)
Min/Max/Average to record signal fluctuations
CAT III 600 V safety rated

Safety conformance

All inputs are protected to CE, IEN61010-1 CAT III 600V. UL, CSA, TÜV listed and VDE.

Specifications
Maximum voltage between any terminal and earth ground	600 V
Surge protection	6 kV peak per IEC 61010-1 600 VCAT III, Pollution Degree 2
Display	Digital: 6,000 counts, updates 4 per second
Bar graph	33 segments, updates 32 per second
Operating temperature	-10 °C to 50 °C
Storage temperature	-40 °C to 60 °C
Battery type	9 volt Alkaline, NEDA 1604A/ IEC 6LR61
Batterylife	400 hours typical, without backlight
Accuracy Specifications
DC millivolts	Range/Resolution	600.0 mV / 0.1 mV
DC millivolts	Accuracy	± ([% of reading] [counts]): 0.5% 2
DC volts	Range/Resolution	6.000 V / 0.001 V 60.00 V / 0.01 V 600.00 V / 0.1 V
DC volts	Accuracy	± ([% of reading] [counts]): 0.5% 2
AC millivolts¹ True RMS	Range/Resolution	600.0 mV / 0.1 mV
AC millivolts¹ True RMS	Accuracy	1.0 % 3 (dc, 45 Hz to 500 Hz) 2.0 % 3 (500 Hz to 1 kHz)
AC volts¹ True RMS	Range/Resolution	6.000 V / 0.001 V 60.00 V / 0.01 V 600.0 V / 0.1 V
AC volts¹ True RMS	Accuracy	1.0 % 3 (dc, 45 Hz to 500 Hz) 2.0 % 3 (500 Hz to 1 kHz)
Continuity	Range/Resolution	600 Ω / 1 Ω
Continuity	Accuracy	Beeper on < 20 Ω, off > 250 Ω; detects opens or shorts of 500 μs or longer.
Ohms	Range/Resolution	600.0 Ω / 0.1 Ω 6.000 kΩ / 0.001 kΩ 60.00 kΩ / 0.01 kΩ 600.0 kΩ / 0.1 kΩ 6.000 MΩ / 0.001 MΩ
	Accuracy	0.9 % 1
	Range/Resolution	40.00 MΩ / 0.01 MΩ
	Accuracy	5 % 2
Diode test	Range/Resolution	2.00 V / 0.001 V
Diode test	Accuracy	0.9% 2
Capacitance	Range/Resolution	1000 nF / 1 nF 10.00 μF / 0.01 μF 100.0 μF / 0.1 μF 9999 μF / 1 μF 100 μF to 1000 μF
	Accuracy	1.9% 2
	Range/Resolution	> 1000 μF
	Accuracy	5% 20%
Lo-Z capacitance	Range	1 nF to 500 μF
Lo-Z capacitance	Accuracy	10% 2 typical
AC amps True RMS (45 Hz to 500Hz)	Range/Resolution	6.000 A / 0.001 A 10.00 A / 0.01 A
AC amps True RMS (45 Hz to 500Hz)	Accuracy	1.5% 3 20 A overload for 30-seconds max
DC amps	Range/Resolution	6.000 A / 0.001 A 10.00 A / 0.01 A
DC amps	Accuracy	1.0% 3 20 A overload for 30-seconds max
Hz (V or A input)²	Range/Resolution	99.99 Hz / 0.01 Hz 999.9 Hz / 0.01 Hz 9.999 kHz / 0.001 kHz 50 kHz / 0.01 kHz
Hz (V or A input)²	Accuracy	0.1% 2
Notes: ¹ All AC voltage ranges except Auto-V/LoZ are specified from 1 % to 100 % of range. Auto-V/LoZ is specified from 0.0 V. ² Frequency is AC coupled, 5Hz to 30 kHz for AC voltage. • Temperature uncertainty (accuracy) does not include the error of the thermocouple probe. • Frequency is AC coupled, 5 Hz to 50 kHz for AC voltage. Frequency is DC coupled, 45 Hz to 5 kHz for AC current. • Temperature Range/Resolution: -40 °F to 752 °F / 0.2 °F.
Mechanical & General Specifications
Size	167 x 84 x 46 mm (6.57″ x 3.31″ x 1.82″)
Weight	550 g
Warranty	3 years

Fluke 117 True-RMS Multimeter

FREE UPS GROUND SHIPPING

The compact Fluke 117 true RMS digital multimeter is optimized to help you keep commercial buildings, hospitals and schools running right.

The advanced features of the Fluke 117 help you get the job done, quickly and safely. Integrated non-contact voltage detection helps you identify energized circuits. The AutoV/LoZ function prevents false readings caused by ghost voltage. The Fluke 117 delivers true-rms ac voltage and current readings with 6000-count resolution. It provides Min/Max/Average readings and measures frequency and capacitance. The battery door is easy to access, so you and your Fluke 117 can stay on the job.

Fluke 117 multimeters are independently tested for safe use in CAT III 600V environments.

- VoltAlert™ technology for non-contact voltage detection
- AutoVolt automatic ac/dc voltage selection
- Low input impedance: helps prevent false readings due to ghost voltage
- Large white LED backlight to work in poorly lit areas
- True-rms for accurate measurements on non-linear loads
- Measures 10 A (20 A overload for 30-seconds)
- Resistance, continuity, frequency and capacitance
- Min/Max/Average with elapsed time to record signal fluctuations
- Compact ergonomic design for one-handed operation
- Compatible with optional magnetic hanger (ToolPak™) for hands free operation
- CAT III 600 V safety rated
AutoVolt/LoZ
VoltAlert

Case: C90

Fluke 125B 40MHz Scopemeter

Fluke 125B 40MHz Scopemeter

FREE UPS GROUND SHIPPING

The Fluke 125B 40MHz Scopemeter: All the power of the 120-Series plus Industrial Bus Health Test capabilities and advanced power measurements on top.

The compact Fluke 125B 40MHz Scopemeter is the rugged solution for industrial troubleshooting and installation applications. Based on the Fluke 120 series, the 125 has all the capabilities of the 124 ScopeMeter extended with the capability to measure and analyze the signal quality on the common industrial buses.

The Fluke 125 ScopeMeter combines a 40MHz dual input digital storage oscillo-scope, two true-RMS digital multimeters and a dual input TrendPlot recorder all in a compact, battery powered instrument. Leave all other test tools behind, the Fluke 125 ScopeMeter is the only tool you’ll need.

Dual-input 40 MHz digital oscilloscope
Two 5,000 counts true-RMS digital multimeters
A dual-input TrendPlot recorder
Shielded test leads for oscilloscope, resistance and continuity measurements
10:1 Voltage Probe included for high frequency measurements
600 V CAT III safety certified
Up to 7 hours battery operation
Optically-isolated interface for PC connection
3 year warranty on main instrument, 1 year on accessories

SOFTWARE NOT INCLUDED

125 Getting Started

Fluke 177 True RMS Digital Multimeter

FREE UPS GROUND SHIPPING

Electrician’s Dream!

With its precision, reliability and ease of use, the Fluke 177 True RMS Digital Multimeter is the preferred solution for professional technicians worldwide. Independently tested for safe use in CAT IV 600 V/ CAT III 1000 V environments, the Fluke 177 is the industry standard with all the features you need to troubleshoot and repair many problems in electrical and electronic systems.

The Fluke 177 Digital Multimeter gives you True-rms voltage and current measurements, 6000-count resolution, manual and automatic ranging and provide frequency, capacitance, resistance, continuity and diode measurements. In addition, the Fluke 177 provides higher 0.09% basic accuracy, a digital display with analog bar graph and backlight.

True RMS voltage and current measurements
0.09% basic accuracy
6000 count resolution
Digital display with analog bargraph and backlight
Manual and automatic ranging
Display Hold and Auto Hold
Frequency and capacitance measurements
Resistance, continuity and diode measurements
Min-max-average recording
Smoothing mode allows filtering of rapidly changing inputs
Easy battery exchange without opening the case
Closed case calibration through front panel
Ergonomic case with integrated protective holster
EN61010-1 CAT III 1000V / CAT IV 600V
Measures twice as fast as other multimeters

175, 177 & 179 Users Manual

Fluke 179 True RMS Digital Multimeter

FREE UPS GROUND SHIPPING

I Want No Other Meter in My Toolkit

With its precision, reliability, and ease of use, the Fluke 179 True RMS Digital Multimeter is the preferred solution for professional technicians around the world. With all the features you need to troubleshoot and repair in electrical and electronic systems, the Fluke 179 also offers a digital display with analog bar graph and built-in temperature measurements.

Works When You Need It, Where You Need It

You can trust the Fluke 179 to get the job done in all of the messy, loud, high energy and high places you work. Backed by a lifetime warranty, the Fluke 179 is independently tested for safe use in CAT IV 600 V/CAT III 1000 V environments.

The Fluke 179 – Just One of Fluke’s Trusted Tools

Fluke builds the most trusted tools in the world, and that means more than just the Fluke 179. If you work with the HVAC equipment, need a small meter for small spaces, or work in the electrical installer’s and repairman’s world, check out the full family of Fluke digital multimeters at Kiesub Electronics.

The Fluke 179 True RMS Digital Multimeter is the industry standard for troubleshooting and repair of electrical and electronic systems.

True RMS voltage and current measurements
0.09% basic accuracy
6000 count resolution
Digital display with analog bargraph and backlight
Manual and automatic ranging
Display Hold and Auto Hold
Frequency and capacitance measurements
Resistance, continuity and diode measurements
Temperature measurements
Min-max-average recording
Smoothing mode allows filtering of rapidly changing inputs
Easy battery exchange without opening the case
Closed case calibration through front panel
Ergonomic case with integrated protective holster
EN61010-1 CAT III 1000V / CAT IV 600V
Measures twice as fast as other multimeters

175, 177 & 179 Users Manual

Fluke 1AC II A1 VoltAlert Electrical Tester

The pocket-sized voltage detector

The next generation Fluke 1AC II A1 VoltAlert Electrical Tester non-contact voltage testers from Fluke are easy to use – just touch the tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, you know there’s voltage present. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits in the workplace or at home.

Voltbeat™ technology and continuous self-test – so you always know it’s working
Upon detection, tip glows and beeper sounds
CAT IV 1000 V for added protection
Expanded range: 90 V AC to 1000 V AC
20 V to 90 V AC control circuit model also available
Two-year warranty
Batteries included
On/Off Button
Audible/Silent

Fluke 3000 FC Series Wireless Multimeter

Fluke 3000 FC Series Wireless Multimeter

Built_with_fc_2line_2c (1)

FREE UPS GROUND SHIPPING

See it. Save it. Share it.

All the facts, right in the field. The Fluke 3000 FC True-RMS Wireless Multimeter with the Fluke Connect™ app and ShareLive™ video call.

With its precision, reliability and ease of use, the Fluke 3000 FC Wireless Multimeter is the ideal solution for professional technicians. Independently tested for safe use in CAT IV 600V/ CAT III 1000 V environments, the Fluke 3000 FC has all the features you need to troubleshoot and repair many problems in electrical and electronic systems.

The Fluke 3000 FC gives you true-RMS voltage and current measurements, 6000-count resolution, manual and automatic ranging and provide frequency, capacitance, resistance, continuity and diode measurements. In addition, the Fluke 3000 FC provides higher 0.09% basic accuracy, a digital display showing up to three secondary measurements from remote modules, and a bright white backlight.

The Fluke 3000 FC Series Wireless Multimeter with the Fluke Connect™ app has all the essentials for convenient test and measurement troubleshooting.

AC and DC voltage measurements to 1000V
AC and DC current with 0.01 mA resolution
Continuity, resistance, diode test, capacitance and frequency measurements
MIN/MAX Recording
CAT III 1000 V, Cat IV 600 V; IP54

Plus, the Fluke Connect wireless enabled modules measure AC, DC and AC DC voltage, AC and DC current, plus temperature, all of which display on the Fluke 3000 FC Series Wireless Multimeter. Choose a standard clamp or flexible clamp to measure AC current. Mix and match modules to suit your unique measurement needs. Read the primary measurement on the main display and up to three modules at any one time. Modules are available separately or as part of Fluke Connect kits.
View spec

Fluke 302+ CAT III Digital Clamp Meter

Fluke 302 CAT III Digital Clamp Meter

The Fluke 302 is a compact, easy-to-use digital clamp meter made to fit the way you work. It is the perfect first-pass troubleshooting tool: small enough to fit in a work bag, tough enough to withstand daily use, and extremely simple to use. All without compromising safety. For everyday applications, where True-RMS accuracy isn’t needed, the Fluke 302 delivers reliable measurements time after time.

Fluke 302 Additional Features

The Fluke 302 CAT III Digital Clamp Meter is more compact, making the use of clamp-type ammeter more flexible and simpler
Measure AC current up to 400A
30 mm large jaw
High accuracy of 1.8%
Backlit display
Two-year warranty

Fluke 302 Comes with Fluke TL75 Hard Point™ Test Lead Set

One pair (red, black) of comfort grip probes
48 inches (1.22 meter) PVC insulated test leads with right-angle shrouded banana plugs
Recommended for general purpose measurements
CAT II 1000 V, 10 A rating
CAT IV 600 V, CAT III 1000 V only with protective cap

Fluke 302 Safety Features

Meets CAT IV 300V/CAT ||| 600V safety rating

Key features

AC current measurements up to 400 A, handling your everyday electrical maintenance needs
Comes with the TL75 Hard Point™ Test Lead Set offering the convenience of a test lead and probe in one unit with a variety of connections
Rugged, easy-to-use digital clamp meter with CAT IV 300 V/CAT III 600 V safety rating

Technical Specifications
AC current	Range	400.0 A
	Accuracy	1.8% ±5
AC voltage	Range	400/600
	Accuracy	1.5% ±5
DC voltage	Range	400/600
	Accuracy	1.5% ±5
DC mV range		–
Resistance	Range	4000 Ω
	Accuracy	1% ±5
Continuity		≤ 70 Ω
Backlight display		Yes
Data hold		Yes
Size	H x W x D (mm)	208 x 58.5 x 28
	Jaw size	30 mm
Safety rating		CAT III 600 V
Temperature		0 ~ 40 °C
Screen refresh rate		> 2 times / sec.
Test leads		TL75
Battery		2 AAA batteries
Warranty		2 years

Includes:

Fluke 302 CAT III Digital Clamp Meter
Fluke TL75 Hard Point™ Test Lead Set
2 AAA batteries (installed)
2-year warranty