Klein Tools 56312 Lo-Flex Fish Rod Set, 12-Feet

Klein Tools 56312 Lo-Flex Fish Rod Set, 12-Feet

The Klein Tools 56312 Lo-Flex Fish Rod is flexible yet rigid for pulling wire long distances. The protective coating keeps hands free of fiberglass splinters. The Rod is made up of three 1/4” diameter x 4′ fish rods assemble to a full 12′.The thread sections together to customize the length needed for your job with extra no tools needed. Our bullet nose and hook attachment is designed to attach and grab wires.

Klein Tools 56119 Illuminated Fish Rod Tip

Klein Tools 56119 Illuminated Fish Rod Tip

Klein Tools 56119 Illuminated Fish Rod Tip gives electricians/cable installers the capability to transform any standard fish stick/fish rod into a lighted fish rod. It allows installers to thread the device directly into a fish rod while allowing the capability to thread the standard tips (bullet nose, J-hook) into the Illuminated Fish Rod Tip. Equipped with 3 LEDs that switch on/off by threading and unthreading the end cap in and out. installers now have the capability to see down walls, through attics, and across drop ceilings.

Lights up for maximum visibility
Bright white, omni-directional LED light for long life
Tapered end for easy pushing and pulling
Attach tip to fish rod for ease of visibility in dark spaces
Replaceable batteries included

Klein Tools 53731 Quick Cutter Adjustable Hole Saw

Klein Tools 53731 Quick Cutter Adjustable Hole Saw

The Klein Tools 53731 Quick Cutter Adjustable Hole Saw cuts 2-1/2-Inch to 7-Inch holes in drywall and ceiling tile. The blades are carbide-coated for longer blade life. Dust shield included. Quick Cutter is a registered trademark of Spear Tools.

Quickly and smoothly cuts cleaner holes in drywall and ceiling tiles.
Blades adjust to cut holes from 2 to 7 in diameter.
Fits most 3/8 and 1/2 drill chucks.
No binding while cutting.
No additional tools needed to adjust the hole saw.
Newly redesigned dust shield (two included) for longer life.
Hex key included.

Klein Tools 53719 3/4-Inch by 54-Inch Flex Bit Auger with Screw Point

Klein Tools 53719 3/4-Inch by 54-Inch Flex Bit Auger with Screw Point

The Klein Tools 53719 Flex Bit Auger with Screw Point is 3/4-Inch in diameter and 54-Inch long and is used to drill holes through wood within a wall. It features a tapered back for easy bit retrieval and a spring steel shaft that resists deformation. The screw point tip pulls the bit through wood and the hole in the tip allows for use with wire or cable pulling grip.

Used to drill holes through wood within a wall
Tapered back for easy bit retrieval
Spring steel shaft resists deformation
Screw point tip pulls the bit through wood
Hole in tip allows for use with wire or cable pulling grip

Klein Tools 32560 Standard Extended-Reach Multi-Bit Screwdriver/Nut Driver

Klein Tools 32560 Standard Extended-Reach Multi-Bit Screwdriver/Nut Driver

The Klein tools 32560 Extended Bit Screwdriver/Nut Driver with Square Recessed includes an interchangeable shaft that holds four (4) universal tips and converts to two (2) nut driver sizes. The extended bit screwdriver/nut driver has a shank length of 4.11-Inches and an overall length of 9.1-Inches. The extra-long extended shafts and blades provide 39% longer reach and provides full reach of 4” standard-blade screwdriver. The small diameter shaft makes for a comfortable grip and quick, easy turning. The Extended Bit Screwdriver/Nut Driver contains a 1/4-Inch slotted head, 2 Phillips head, 1/4-Inch and 5/16-Inch nut drivers, and 1 and 2 square-recess.

Interchangeable shaft holds 4 universal tips and converts to 2 nut driver sizes
Extended shafts and blades provide 39-Percent longer reach
Extra-long shaft provides full reach of 4-Inch standard-blade screwdriver
Small diameter shaft for comfortable grip and quick, easy turning
Contains: 1/4-Inch slotted, 2 Phillips, 1/4-Inch and 5/16-Inch nut drivers, 1 and 2 square-recess

Klein Tools 32561 Stubby Screwdriver/Nut Driver with Cushion Grip 6 in 1 Tool

Klein tools 32561 Stubby Screwdriver/Nut Driver with Cushion Grip 6 in 1 Tool

The Klein tools 32561 Stubby Screwdriver/Nut Driver with Cushion Grip includes an interchangeable shaft that holds four (4) universal tips and converts to two (2) nut driver sizes. The stubby screwdriver/nut driver has a shank length of 1.27-Inches and an overall length of 3.2-Inches. The Compact design allows easy access to tight work spaces while the cushion-grip handles provide greater torque and comfort. The stubby screwdriver/nut driver contains 3/16-Inch and 1/4-Inch slotted heads, 1 and 2 Phillips heads, and 5/16-Inch nut drivers.

Interchangeable shaft holds 4 universal tips and converts to 2 nut driver sizes
Compact design allows easy access to tight work spaces
Cushion-Grip handles provide greater torque and comfort
Contains: 3/16-Inch and 1/4-Inch slotted, 1 and 2 Phillips, 1/4-Inch and 5/16-Inch nut drivers

Klein Tools 32537 10-Fold Torx Tamperproof Screwdriver/Nut Driver

Klein Tools 32537 10-Fold Torx Tamperproof Screwdriver/Nut Driver

The Klein Tools 32537 10-Fold 10-in-1 Torx Tamperproof Screwdriver/Nut Driver incorporates a patented Tip-Ident that quickly identifies the type of screwdriver and screwdriver tip orientation. The Torx Tamperproof Screwdriver/Nut Driver‘s Cushion-Grip handle allows for greater torque and comfort. Premium chrome plated and Special heat-treated shafts create a smooth feel and promote corrosion resistance. Internal flanges inside handle provide solid, twist-resistant blade anchor. Blast finish steel bits provide a firm hold to the fastener to reduce cam-out. This Folding pocket-style 10-in-1 tool includes interchangeable bits, 8 screwdriver sizes and 2 nut drivers. Unfolds and locks at a 180-Degree angle to provide a straight screwdriver. The 32537 features Precision-machined tips for exact fit. This 10-in-1 tool Contains a 5/16-Inch and 1/4-Inch nut drivers, T7, T8, T9, T10, T15, T20, T25 and T27 TORX. Meets or exceeds applicable ASME / ANSI specifications.

Folding pocket-style 10-in-1 tool with interchangeable bits – 8 screwdriver sizes and 2 nut drivers
Unfolds and locks at a 180-Degree angle to provide a straight screwdriver
Blast finish steel bits provide a firm hold to the fastener to reduce cam-out
Contains 5/16-Inch and 1/4-Inch nut drivers, T7, T8, T9, T10, T15, T20, T25, T27 TORX
TORX is a registered trademark of Acument Intellectual Properties, LLC

Klein Tools 32535 10-Fold 10-in-1 Screwdriver/Nut Driver

Klein Tools 32535 10-Fold 10-in-1 Screwdriver/Nut Driver

The Klein Tools 32535 10-Fold 10-in-1 Screwdriver/Nut Driver is a folding pocket-knife-style 10-in-1 tool with interchangeable bits – 8 screwdriver sizes and 2 nut drivers. It unfolds and locks at a 180-degree angle to provide a straight screwdriver. The blast finish steel bits provide a firm hold to the fastener to reduce cam-out. Contains 5/16-Inch and 1/4-Inch nut drivers, 1 and 2 Phillips, 1/4-Inch and 3/16-Inch slotted, T10 and T15 TORX, and 1 and 2 square-recess bits. Klein Tools offers a variety of tip types, hex sizes, shaft lengths, and handle designs, Klein has the screwdrivers and nut drivers professionals demand to get the job done with comfort and ease of use.

Folding 10-in-1 tool with interchangeable bits – 8 screwdriver sizes and 2 nut drivers
Unfolds and locks at a 180-degree angle to provide a straight screwdriver
Blast finish steel bits provide a firm hold to the fastener to reduce cam-out
Contains 5/16-Inch and 1/4-Inch nut drivers, 1 and 2 Phillips, 1/4-Inch and 3/16-Inch slotted, T10 and T15 TORX, and 1 and 2 square-recess bits

Klein Tools 32517 Multi-Bit Tap Tool Driver

Klein Tools 32517 Multi-Bit Tap Tool Driver

Klein Tools 32517 features:

Increases job speed by combining taps and drivers in one tool
Six common tap sizes (6-32, 8-32, 10-32, 10-24, 12-24, 1/4-20); Four Screwdriver tips (#1 and #2 Phillips, 3/16” and 1/4” Slotted); Three Nut Driver sizes (1/4″, 5/16″ and 3/8″)
Large Cushion-Grip handle for greater comfort and torque
Replacement tap available (Cat. No. 32518)

Klein Tools 32217 Drill Tap Tool Kit

Klein Tools 32217 Drill Tap Tool Kit

Six Tap Sizes Plus Two Extra of the Smaller Taps

The Klein 32217 Drill Tap Took Kit comes with 6 commonly-used sizes of tap tools to let you drill, tap and deburr in one easy set. Each piece works easily with the quick connect in power tools giving you the flexibility you’ll need. The tap tools are made of high speed steel for added durability and can be used on aluminum, brass, and copper, plastic and mild steel as well as up to 10 gauge metal. Comes included with a carrying case, (2) 6-32 Drill Tap Tool, (2) 8-32 Drill Tap Tool, (1) 10-32 Drill Tap Tool, (1) 10-24 Drill Tap Tool, (1) 12-24 Drill Tap Tool and (1) 1/4 – 20 Drill Tap Tool.

Drill, tap and deburr in one easy step.
Used for aluminum, brass, copper, plastic and mild steel.
Designed for use on up to 10 gauge metal.
1/4” hex for easier application with quick connect.
Includes a carrying case.

Klein Tools 11045 Wire Stripper/Cutter

Klein Tools 11045 Wire Stripper/Cutter

Klein Tools 11045 Wire Stripper/Cutter, manufactured with the needs of the professional tool user in mind, Klein strippers, cutters, and crimpers are designed to get jobs done with precision and quality. Curved handles help reach into confined areas. Double dipped comfort grips. Wire looping and bending holes. Strong-gripping serrated nose; for easy bending, shaping, and pulling of wire. Handy closure lock for convenient storage.

Compact, lightweight wire-stripping and cutting tool. Narrow nose fits into tight places
Hardened steel with precision ground stripping holes
Do not use for cutting steel wire or bolts
Easy-to-read wire gauge markings on both sides for stripping in either direction
Black-oxide finish resists corrosion

Klein Tools 11047 Wire Stripper and Cutter

Klein Tools 11047 Wire Stripper and Cutter

Klein Tools 11047 Wire Stripper and Cutter, manufactured with the needs of the professional tool user in mind, Klein strippers, cutters, and crimpers are designed to get jobs done with precision and quality. Curved handles help reach into confined areas. Double dipped comfort grips. Wire looping and bending holes. Strong-gripping serrated nose; for easy bending, shaping, and pulling of wire. Handy closure lock for convenient storage.

Use to strip, crimp and cut electrical wire
Hardened steel construction with precision-ground stripping holes
Narrow nose fits into tight places
Not for use with cutting steel wire or bolts

Klein Tools 1010 Long-Nose Multi-Purpose Tool

Klein Tools 1010 Long-Nose Multi-Purpose Tool

Klein Tools 1010 Long-Nose Multi-Purpose Tool manufactured with the needs of the professional tool user in mind, Klein strippers, cutters, and crimpers are designed to get jobs done with precision and quality. Curved handles help reach into confined areas. Double dipped comfort grips. Wire looping and bending holes. Strong-gripping serrated nose; for easy bending, shaping, and pulling of wire. Handy closure lock for convenient storage.

Easily cuts and strips wire.
Narrow, serrated plier nose to pull, loop and bend wire.
Long, curved cutting blade.
Cutters and strippers are in front of the pivot for maximum ease-of-use in reaching into tight places.
Crimps insulated and non-insulated terminals and 7 to 8 mm ignition terminals.
Plastic-covered cushioned handles for comfort.

Klein Tools 1000 Multi-Purpose 6-In-1 Tool

Klein Tools 1000 Multi-Purpose 6-In-1 Tool, manufactured with the needs of the professional tool user in mind, Klein strippers, cutters, and crimpers are designed to get jobs done with precision and quality. Curved handles help reach into confined areas. Double dipped comfort grips. Wire looping and bending holes. Strong-gripping serrated nose; for easy bending, shaping, and pulling of wire. Handy closure lock for convenient storage.

Cleanly shears bolts.
Easily cuts and strips wire.
Measures stud sizes.
Gauges wire sizes.
Crimps insulated terminals.

Klein Tools 1004 Wire Stripper/Cutter Solid and Stranded Wire

Klein Tools 1004 Wire Stripper/Cutter for solid and stranded wire, manufactured with the needs of the professional tool user in mind, Klein strippers, cutters, and crimpers are designed to get jobs done with precision and quality. Curved handles help reach into confined areas. Double dipped comfort grips. Wire looping and bending holes. Strong-gripping serrated nose; for easy bending, shaping, and pulling of wire. Handy closure lock for convenient storage.

A handy, light, compact tool for stripping insulation
Convenient hole for looping or bending wire
Black-oxide finish with plastic-dipped handles
Cuts, strips, and loops 12-26 solid and stranded wire
Adjustable slide stop with set screw for repeat stripping work

Klein Tools 1001 Multi-Purpose Electrician’s Tool 8-22 AWG

Klein Tools 1001 Multi-Purpose Electrician’s Tool 8-22 AWG Red 8 1/2 Inches

Klein Tools 1001 Multi-Purpose Electrician’s Tool 8-22 AWG manufactured with the needs of the professional tool user in mind, Klein strippers, cutters, and crimpers are designed to get jobs done with precision and quality. Curved handles help reach into confined areas. Double dipped comfort grips. Wire looping and bending holes. Strong-gripping serrated nose; for easy bending, shaping, and pulling of wire. Handy closure lock for convenient storage.

Two wire cutters one at tip, the other halfway back near stripping holes double the utility of this tool.
Crimps 7-8 mm insulated and non-insulated terminals, lugs and splices.
Cuts and strips 8-22 AWG solid and 10-26 AWG stranded wire.
Cleanly shears bolts.
Pivot nut adjusts tension.
Full-sized, plastic-covered cushioned handles for comfort.
Full-sized, plastic-covered cushioned handles for comfort.
Wire cutter in nose and below pivot.
Crimping dies color-coded for easy identification.