Hakko FM-205 120W Desoldering / Soldering Station

Hakko FM-205 120W Desoldering / Soldering Station

The Hakko FM-205 Digital Desoldering Tool is very similar to the Hakko FM-204 except that it uses compressed air to generate the vacuum rather than an internal pump. This provides for slightly higher vacuum pressure, increased suction flow, and a lower station cost.

  •  Requires Shop Air.
  • Digital Temperature Control.
  • Temperature range 200 – 450°C (400 – 840°F)
  • Temperature accuracy ±15°C
  • Uses composite nozzles for improved thermal performance.
  • Quick-change composite nozzles (N3 series).
  • Uses low cost disposable filter cartridges.
  • Can be used as a soldering station with a Hakko FM2027 connector.
  • Gun or Pencil-style desoldering handpiece.
  • Less prone to clogging as compared to older desoldering stations when used on lead free applications.
  • Includes low temperature alarm, sleep mode functionality & auto power off.

Included:

  • FM2024-02 desoldering handpiece
  •  A1511 filter pipe assembly
  • B2972 control card
  • FH200-05 sleep stand iron holder
  • 599B-02 wire sponge tip cleaner
  • B2873 cleaning drill
  • B2876 nozzle remover
  • B2300 ESD safe heat resistant pad
  • A1514 ceramic paper filters

Kiesub Electronics is a leading distributor of Hakko soldering equipment.  Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.



Hakko FM-204 Solder/Desolder Station with FM2024-02 Desoldering Tool

Hakko FM-204 Solder/Desolder Station with FM2024-02 Desoldering Tool

The Hakko FM-204-01 ESD Solder/Desolder Station with FM2024-02 Desoldering Tool is a “self-contained” desoldering station offers dual functionality for both soldering and desoldering in one station in a single-port station.

  • Built in vacuum pump.
  • Meets or exceeds J-STD-001 requirements.
  • Auto sleep-mode.
  • Choose either gun or pencil style nozzle.
  • Quick-Change composite nozzle.
  • Works with FM-2027 Soldering Iron (not included).

Included:

  • FM-204 Desoldering Dtation.
  • FM2024-02 Desoldering Handpiece.
  • FH200-05 Iron Holder with 599B Tip Cleaner.
  • Cleaning Drill.
  • Nozzle Remover.
  • Ceramic paper filter.
  • Connector & Power  cords.
  • Key Card

Kiesub Electronics is a leading distributor of Hakko soldering equipment.  Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.



Hakko 485 850W Rework System with Shop Air Unit

Hakko 485 850W Rework System with Shop Air Unit

compatible with LEAD-FREE solder

The Hakko 485 Rework System ESD 850W with Shop Air Unit is a compact, high-performance soldering system developed exclusively for soldering and desoldering components and connectors mounted on PC boards.

Hakko 485 850W Rework System with Shop Air Unit features:

  •  Solder flow is time-controlled and temperature-controlled
  • soldering and desoldering cycles are automatic and precise
  • A built in locator light pinpoints the exact position for placing components
  • Solder remaining in through-holes is completely removed by using the Hakko 486 Air Blower (included with 485-V12)
  • A large selection of nozzle sizes available.
  • Power Comsumption: 850w
  • Temperature Range: normally up to 299°C (570°F)
  • Air Pressure: 2 kg/cm² (4.4 lbs.) – 10 kg/cm² (22 lbs.)

NOTE: Due to the increased use of lead free and other solder compositions, the 485 is shipped with an empty solder pot, saving time and effort for the end-user.

Kiesub Electronics is a leading distributor of Hakko soldering equipment.  Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.



Hakko FM2029-01 Hot Air Iron Conversion Kit with Iron and Holder

Hakko FM2029-01 Hot Air Iron Conversion Kit with Iron and Holder

Hakko FM2029-01:

  • Everything you need to add an additional hot air iron to your Hakko FM station
  • FM2029-01 Includes:
    • FM2029-02 hot air iron
    • C1574 holder
    • B3253 connecting cord
    • B2300 tip removal heat pad
Power Consumption 140W
Temperature Range 100-550°C / 200-1030°F
Tip to Ground Resistance <2 ohms
Tip to Ground Potential <2mV
Total Length (w/o cord, nozzle) 167mm
Weight (w/o cord, nozzle) 42g
Cord 1.2m

The Hakko FM2029-01 is a soldering iron upgrade for the FM-206 3-Port Rework System.

Kiesub Electronics is a leading distributor of Hakko soldering equipment.  Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.