This table top soldering aid features a weighted base, magnifying lens, and alligator style clips for holding your project in place. Multiple points of adjustment for ease of use.
2.6 inch glass lens magnifier
2 fully adjustable arms with alligator clips
Heavy duty base
The Hakko C1392B Rework Fixture is designed for use with the Hakko 850 or Hakko 852 Hot Air Rework System, either alone or together with the Hakko 853 Pre-Heater and Hakko C1390 Omnivise Board Holders.
The new design features a smoother lever-action stroke with an adjustable stop to help prevent unnecessary pressure being applied to the board and nozzle, an adjustable vertical height for greater flexibility, and a more secure holder for the 850/852 handpieces.
The Operating lever can be fixed to either the left or right side of the fixture to accommodate the operator.
The C1392B Rework Fixture requires some assembly.
Kiesub Electronics is a leading distributor of Hakko soldering equipment. Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.
Hakko C1390C Omnivise PCB Holder
The Hakko C1390C Omnivise was designed to hold printed circuit boards level while reworking them, but it can adapt easily to anything in the horizontal plane.
• adjustable height from bottom base to top of riser: 2.8, 3.1, 3.3, 3.6, 3.8 in. increments (72.5, 78.0, 84.5, 91.0, 97.5 mm)
• adjustable opening from 0 to 0.8 in (0 to 20mm)
• padded jaws to protect from damage to delicate surfaces
• ESD safe
Kiesub Electronics is a leading distributor of Hakko soldering equipment. Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.
The Hakko C1391B Nozzle Tray offers convenient storage for nozzles. Removal and installations slots make changing nozzles safe, fast, and easy.
Designed to work with Hakko hot air stations: 850, 852, and 702.
Kiesub Electronics is a leading distributor of Hakko soldering equipment. Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.
Hakko 394 Battery operated SMD vacuum pickup tool:
The 394 SMD vacuum Pick up tool is easy to use and hold. Ideal for handling surface mount components. An ultra-compact high powered pump eliminates need for a power cord and an air tube. The pen is constructed from anti-static material and has a soft touch switch
The Hakko 394 functions using with 2 AAA batteries which are included with the tool.
Contents:
Kiesub Electronics is a leading distributor of Hakko soldering equipment. Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.
Hakko FR-870B 2‐Bank IR Preheater description:
The Hakko FR-870B is an updated replacement for the popular Hakko FR‐870 IR Preheater that includes an upgrade to use the new high efficiency carbon filament lamps that nearly eliminates the visible spectrum while maintaining a very high output in the infrared spectrum with minimal shadowing, allowing for a very even preheating of the PCB.
The Hakko FR-870B also includes an upgrade to use the new software features found in the FR‐872 4‐ Bank IR Preheater, allowing you to control the ramp rate at 1, 2, or 3 degrees Celsius per second when you are in one of the two thermocouple modes.
The Hakko FR-870B has 2 switchable zones for heating and still offers the same low profile and with a simple integrated PCB holder that is very easy to setup, automatic operation modes allowing for a 3‐ heating zone profile that can be programmed into the system, and a total of 10 profiles that can be stored for each automatic operation mode.
The FR-870B can also be integrated for start/stop operation in conjunction with the popular FR‐803B Hot Air Rework Station, or the FM‐ 206 3‐Port Rework System (integration requires an optional connection cable that is not included).
Kiesub Electronics is a leading distributor of Hakko soldering equipment. Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.
Hakko FM-2023 SMD Mini Hot Tweezer with tips and stand.
The Hakko FM-2023 designed for use with small chip components as small as 0201. The Mini Parallel Remover has a unique feature allowing it to work as a standard or reverse action tweezer. A simple flip of a switch sets the action of the tool.
The FM-2023 must be used in conjunction with a FM-203 or FM-202 soldering station. The holder clip (PN: B2848) attaches to a 634 iron holder (634-01, 634-02, 634-03.) The Hakko FM-2023 SMD Mini Parallel Remover removes chips as small as 0201. Note: Tips/Tweezers are NOT included.
Kiesub Electronics is a leading distributor of Hakko soldering equipment. Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.
The Hakko FT-700 is great for Lead-Free solder!
When hand soldering with Lead-Free alloys, higher tip temperatures and highly-active fluxes causes oxidation and corrosion, which greatly decreases the life of your soldering iron tip. The Hakko FT-700 tip polisher helps increase the life of your tip by keeping it clean and free from oxidation easily and quickly.
HAKKO proposes guidelines on how to select the most suitable tip size.
Kiesub Electronics is a leading distributor of Hakko soldering equipment. Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.
Hakko 373-11 Solder Eire Self Feeder features:
| Specification | |
| Power Consumption | 6W |
| Motor Rating | 24V DC, 3.2W |
| Solder Feed Time | 0 – 7 sec. (Auto mode) |
| Solder Feed Speed | 4.5 – 26mm/sec. (0.18 – 1.0 in./sec.) |
| Solder Return Qty. | 1.5 mm (0.06 in.) from taping end 2.0mm (0.08 in.) from part end |
| Mode Switch | Auto / Manual |
| Solder Diameter | 0.6, 0.65, 0.8, 1.0, 1.2, 1.6mm (0.024, 0.026, 0.031, 0.039, 0.04, 0.063 in.) |
| Coiled Solder | Maximum 1 kg bobbin (2.2 lbs.) |
Kiesub Electronics is a leading distributor of Hakko soldering equipment. Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.
Hakko FM2029-01:
| Power Consumption | 140W |
| Temperature Range | 100-550°C / 200-1030°F |
| Tip to Ground Resistance | <2 ohms |
| Tip to Ground Potential | <2mV |
| Total Length (w/o cord, nozzle) | 167mm |
| Weight (w/o cord, nozzle) | 42g |
| Cord | 1.2m |
The Hakko FM2029-01 is a soldering iron upgrade for the FM-206 3-Port Rework System.
Kiesub Electronics is a leading distributor of Hakko soldering equipment. Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.
The HAKKO FT-710 Tip Cleaner is designed to quickly and effectively clean your soldering iron tip. The counter-rotating brushes remove tip oxides, debris, and excess solder without damaging the tip plating, and the soldering iron specific receptacle collar provides accurate positioning of the tip for optimal cleaning while mitigating FOD potential from the spatter of the solder that is cleaned from the tip
The tip cleaner is activated only when the tip is pressed into the holder. The tip cleaner can also be mounted to existing FH-200 Series Iron Holders in place of the sponge/tip cleaner tray.
When hand soldering with Lead-Free alloys, higher tip temperatures and highly-active fluxes causes oxidation and corrosion, which greatly decreases the life of your soldering iron tip. The Hakko FT-710 will help increase the life of your tip by keeping it clean and free from oxidation easily and quickly.
Kiesub Electronics is a leading distributor of Hakko soldering equipment. Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.
Kiesub Electronics is a leading distributor of Hakko soldering equipment. Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.