Hakko FX-901/P Cordless Soldering Iron

The Hakko FX-901 is the cordless soldering iron solution ideal for field service technicians and for all your soldering projects and hobbies. This portable, lightweight, battery-operated soldering iron can operate above 600*F for up to 120 continuous minutes, unlike any other cordless soldering gun.

ON / OFF switch
Quick-change composite tip
Maintains soldering temperature of 600 F
Separate battery magazine for easy replacement of batteries
Long-life battery power:
Alkaline batteries ~70 minutes
Ni-MH batteries ~120 minutes
Protective safety cap turns unit off and covers tip

Hakko FX650-02/P Soldering Iron

The perfect iron for lightweight, entry level soldering.

T34 Series Tips that integrate tip and enclosure, simplifying the tip changing process
Uses a highly efficient ceramic heater
Comes with a basic iron stand and a small sample of lead-free solder

Hakko PD-03-D ESD-Safe Manual Desoldering Tool

The Hakko PD-03-D manual desoldering tool provides a low cost and effective method for removal of residual solder during desoldering operations. With the press of a button, the spring activated vacuum system sucks the molten solder into the collection chamber, which is easily accessible for removal of solder and cleaning.
The PD-03-D is made of ESD Safe resins.

Hakko PG1-0-D 1.2 x 60 mm. Slotted Tip Screwdriver

CHP screwdrivers feature ergonomic handles with a tapered soft grip for operator comfort. A rotating cap at the fingertip allows for better control and quick fastening. Available in standard and ESD-safe grips with Slot, Phillips, Pozidrive and Torx tips.

Head Width: 1.2 mm
Head : 2.5 mm
Shaft Length: 60 mm
Total Length: 160 mm

Hakko PG1-3 2.5 x 75 mm. Slotted Tip Screwdriver

Head Width: 2.5 mm
Head : 2.5 mm
Shaft Length: 75 mm
Total Length: 175 mm

Hakko PG1-5 3.0 x 150 mm. Slotted Tip Screwdriver

Head Width: 3.0 mm
Head : 3.0 mm
Shaft Length: 150 mm
Total Length: 250 mm

Hakko PG2-1 2.5 x 60 mm. Phillips Screwdriver

Head Width: PH-00, 2.5 mm
Head : 2.5 mm
Shaft Length: 60 mm
Total Length: 160 mm

Hakko PG2-2 3.0 x 60 mm. Phillips Screwdriver

Head Width: PH-0, 3.0 mm
Head : 3.0 mm
Shaft Length: 60 mm
Total Length: 160 mm

Hakko PG4-0 T6 x 50 mm. Torx Tip Screwdriver

Head: T6
Head : 3.5 mm
Shaft Length: 50 mm
Total Length: 150 mm

Hakko PG4-1-D T7 x 50 mm. Torx Tip Screwdriver

Head: T7
Head : 3.5 mm
Shaft Length: 60 mm
Total Length: 150 mm

Hakko PN-2002-PM Pointed Nose Pliers

Smooth, 45 degree angled long nose pliers with rounded external edges. Thanks to its shape, it gives a wide angle of vision of the work area.

Thin, short pliers for very delicate work
Angled to 45 degrees
16mm jaw with 1mm nose
Nose: Pointed
Jaws: Smooth
Outside Edge: Rounded

Hakko PN-2006 Long Nose Pliers

The PN-2006 is a smooth, pointed long nose pliers ideal to be used in difficult to reach areas.

For delicate work in tight areas
32mm long jaw with 1.2mm nose
Nose: Pointed
Jaws: Smooth
Outside Edge: Flat

Hakko PN-2007 Long Nose Pliers

The PN-2007 is a serrated, flat long nose pliers ideal to be used in difficult to reach areas.

For delicate work in tight areas
32mm long jaw with 3.0mm nose
Nose: Flat
Jaws: Serrated
Outside Edge: Flat

Hakko T18-C2 Bevel Tip

2.1MM/45 degree Bevel

This tip is used with the following Hakko Soldering Stations and Systems:
Hakko FX-888 Soldering Station
Hakko 913 ESD Safe Fume Extraction Iron (Requires a Fume Extraction System)
Hakko 907 Soldering Iron
Hakko 907-ESD Soldering Iron
Hakko 900M Soldering Iron
Hakko 900M-ESD Soldering Iron
Hakko 928 Soldering Station
Hakko 936 Soldering Station
Hakko 936-ESD Soldering Station
Hakko 937 Soldering Station
Hakko 703 Soldering Station

Hakko T18-DL32 Chisel Tip

3.2MM Long Chisel

Hakko TR-20-M Micro Cutter

Tool for a flush cut. The reduced head s dimension and its pointed shape, allow access to difficult to reach areas. Safety clip for holding wire scraps securely after cutting available (order part number TR-20-M-A). Safety clip type AF.

The small head and anatomic design makes this an ideal cutter for working in tight spaces.

Cutting Force: 3 kg
Cut: Flush
Max cut: 20 AWG copper wire

Hakko TR-30 Medium Cutter

Tool for a flush cut. One of the most popular cutting tool. Safety clip for holding wire scraps securely after cutting available (order part number TR-30-A). Safety clip type AL.

Tool for a flush cut
Similar to the TR-25 but with stronger blades
As an added bonus, the tool exhibits longer life due to its thicker steel
Cutting Force: 5.5 kg
Cut: Flush
Max cut: 16 AWG copper wire
Handle: NA
Part Number (with safety clip): TR-30-A

Hakko TR-30-58 Medium Cutter

Tool for a chamfered cut. The special treatment of blades make this tool particularly suitable for the cutting of ferrous material. Safety clip for holding wire scraps securely after cutting available (order part number TR-30-58-A). Safety clip type AL.

Chamfered cutting tool
Special treatment of the blades makes this tool particularly suitable for cutting ferrous material
Cutting Force: 8.5 kg
Cut: Chamfered
Max cut: 14 AWG copper wire
Handle: NA
Part Number (with safety clip): TR-30-58-A