Jonard Tools FOD-2000 Fiber Optic Drop Cable Slitter

Jonard Tools FOD-2000 Fiber Optic Drop Cable Slitter

The FOD-2000 Fiber Optic Drop Cable Slitter is a patented tool that simplifies the slitting of drop cable jackets at the end of the cable or mid-span and was developed specifically for FTTH technicians working with flat fiber drop cables. For flat cables, where the width is .305″-.350″ and the height is .155″-.185″. These are the dimensions of a typical Corning SST-Drop flat cable with a jacket thickness of 0.03-0.04 inches. The tool will work on other cables with similar dimensions.

The FOD-2000 puts a slit on both sides of the jacket allowing easy access to the fiber or strength member. The ease of use makes this tool truly unique! To use just position the tool around the cable, pull and slit. A simple twist of the cable allows the jacket and strength members to separate from the buffer tube leaving the fiber undamaged.

Designed for .250″ flat drop cables. The FOD-2000 comes completely assembled with two blades, which can be reversed once the blades are worn. Replacement blades are also available under part number FOD-RB25 for a package of 25 blades.



Jonard Tools FPL-5050 Fiber Power Meter & Optical Light Source Kit

FPL-5050

Jonard Tools FPL-5050 Fiber Power Meter & Optical Light Source Kit

This tool kit provides everything you need to measure power and provide a stable light source for fiber optic cable testing. The FPL-5050 Fiber Power Meter & Optical Light Source Kit (-50 to 26 dBm, single-mode) includes:

  • The FPM-50A Fiber Optic Power Meter to measure wavelengths from 800-1650 nm, with a mere 0.01 dB resolution
    • Measures 6 preset calibrated wavelengths with high precision to determine absolute or relative power
    • Includes FC/SC adapters for APC/PC/UPC connectors and an LC adapter for PC/UPC connectors only
  • The FLS-50 Fiber Optic Light Source to provide either 1310 nm or 1550 nm wavelengths for a stable light source for single-mode fiber measurements
    • Has four different modulation outputs (CW, 270 Hz, 1 kHz, 2 kHz) at 1310 nm and 1550 nm wavelengths
    • Includes FC, SC, and LC adapters to directly connect to UPC/PC FC, SC, and LC fiber connectors
  • A FREE BAG! The H-22 Rugged Carrying Case with Straps ($35 value)!
  • Nylon Carry Case (FPM-50A)
  • Protective Cover (FPM-50A)
  • Storage Pouch (FLS-50)
  • With both the FPM-50A and FLS-50
    • Instruction Manuals
    • (3) AA Batteries each (required for operation)
    • (2) Cleaning Swabs each
    • FC Adapter, LC Adapter, and SC Adapters

Set variation:

Model: Fiber Power Meter & Optical Light Source Kit (-50 to 26 dBm, single-mode)

 



Jonard Tools TK-350 Fiber Optic Tool Kit with Kevlar Cutter

Jonard Tools TK-350 Fiber Optic Tool Kit with Kevlar Cutter

Kit includes:

JIC-375 Three Hole Fiber Optic Stripper

The first hole of this Fiber Optic Stripper strips the 1.6-3 mm fiber jacket down to the 600-900 micron buffer coating. The second hole strips the 600-900 micron buffer coating down to the 250 micron coating and the third hole is used to strip the 250 micron cable down to the 125 micron glass fiber without nicks or scratches.

JIC-186 Wire & Kevlar Cutting Shears

High carbon stainless steel blades (heat treated to HRC 58-60) designed to cut Kevlar®, cabling insulation, tape, cable ties and other material. Ergonomic handles for user comfort and durability. Adjustable joint screw under protective cap, serrated blade grip material, sharp and durable 6″ long.

H-60 Molded Two Tool Pouch

Made of durable PVC material with metal clip.

 



Eclipse 200-047 Nick-Free Fiber Optic Stripper

Eclipse 200-047 Nick-Free Fiber Optic Stripper

TheEclipse 200-047 blades ensure that these strippers cut nick free. The Screw make it possible to adjust the depth of your cut and the spring loaded handles lessen the strain on the hand.

Nick-free Fiber Optic Stripper

  • Nick-Free
  • Screw for fine adjustments
  • Spring loaded handles
  • Strips 900 um buffer
  • Strips 2-3 mm jacket
  • Strips 125 um Acrylate

 

 



Eclipse 300-167 Fiber Optic Crimp Tool

Eclipse 300-167 Fiber Optic Crimp Tool

The Pro’sKit Fiber Optic Crimp Tool Lunar Series is designed for use with FC,SC,ST,LC, SMA & MT-RJ fiber optic connectors

HEX .139”, .151”, .178”, ROUND .134”, .190”