Hakko FR-410 140W High Power Desoldering Station

Hakko FR-410 140W High Power Desoldering Station

Free Shipping on orders over $100!

Replaces Hakko 472D

The HAKKO FR‐410 Desoldering Station is designed to fit that need and bridge the gap in power between the 70W HAKKO FM‐204 Desoldering Station, and the 300W HAKKO FR‐400 Ultra Heavy Duty Desoldering Station.

The HAKKO FR‐410 provides 140W of power and has the widest selection of nozzle configurations that can meet almost every need. The station also includes the same popular features from the HAKKO FR‐400 which include an anti‐clogging feature which helps ensure instantaneous application of peak vacuum pressure to the solder joint, a delay timer to prevent premature release of the vacuum system before solder has cleared the heater and is captured in the solder collection chamber, a large, easy to read display that includes a vacuum level indicator to let you know if there are restrictions building that will need to be cleaned out, 3 user programmable presets, and process control password lockout to prevent any unauthorized changes to the systems operation or setup.

 



Hakko FR-872 1440W IR Preheater

Hakko FR-872 1440W IR Preheater

 

HAKKO FR-872 4-Bank IR Preheater provides a fast and efficient method of preheating large and small PCB assemblies while still on the workbench but in a very controlled fashion. This preheater uses a new high efficiency carbon filament IR heating lamp that nearly eliminates the visible spectrum while maintaining a very high output in the infrared spectrum with minimal shadowing, allowing for a very even preheating of the PCB.

The HAKKO FR-872 has the same operation as the smaller HAKKO FR-870 but has 4 switchable zones of preheating compared to just 2.and both manual and automatic modes of operation using either a thermocouple for closed-loop feedback of the PCB heating, or using power settings of the heaters.

A new feature that has been added for the HAKKO FR-872 is the Ramp Control. This new feature allows you to control the ramp rate of the PCB when using either of the thermocouple modes of temperature control. The feature allows you to select ramp rates of 1, 2, or 3 degrees Celsius per second. Settings of the preheater can be locked out using a password to prevent inadvertent changes that could affect the process.

As with the HAKKO FR-870, the new HAKKO FR-872 allows for automatic operation following a 3-heating zone profile that can be programmed into the system. A total of 10 profiles can be stored for each mode of operation, for a total of 20 possible profiles. The HAKKO FR-872 also integrates for start/stop operation to work in conjunction with the hot air rework profiles programmable into the HAKKO FM-206 or HAKKO FR-803B (integration requires an optional connection cable that is not included).



Hakko FM2024-21 Desoldering Module Conversion Kit with Sleep Holder

Hakko FM2024-21 Desoldering Module Conversion Kit with Sleep Holder

Hakko FM2024-21 Desoldering Module Conversion Kit features:

The Hakko FM-2024 Desoldering Module extends the versatility of the award winning Hakko FM-202 or thenew FM-203 Soldering Station giving you a complete soldering and desoldering solution, in one modular station.

Building on Hakko’s revolutionary composite tip technology, the desoldering nozzle/tip heater cartridge assembly offers a one-step, quick-change design with fast thermal recovery; the enlarged throat and shortened nozzle design is virtually non-cloggable, making it ideal for NO LEAD applications; and its slender body enables it to reach those difficult-to-reach component pads on densely populated boards.

The Hakko FM-2024 also features an extremely lightweight, reconfigurable handpiece that allows the user the option to use the tool as either a gun or pencil style handpiece by simply removing or adding the Handle.

Included:

  •  Desoldering Handpiece (FM2024-02)
  • Desoldering Control Module (C1492)
  • Desoldering Handpiece Grip (B2872 for Gun Style Configuration)
  • Handpiece Holder (FH200-05 – Includes Hakko 599B Tip Cleaner)
  • Nozzle Remover (B2876)
  • Cleaning Drill (B2873)
  • Sleep Mode Cord (B3253)
  • Filter Pipe (A1511)

Kiesub Electronics is a leading distributor of Hakko soldering equipment.  Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.



Hakko FM-205 120W Desoldering / Soldering Station

Hakko FM-205 120W Desoldering / Soldering Station

The Hakko FM-205 Digital Desoldering Tool is very similar to the Hakko FM-204 except that it uses compressed air to generate the vacuum rather than an internal pump. This provides for slightly higher vacuum pressure, increased suction flow, and a lower station cost.

  •  Requires Shop Air.
  • Digital Temperature Control.
  • Temperature range 200 – 450°C (400 – 840°F)
  • Temperature accuracy ±15°C
  • Uses composite nozzles for improved thermal performance.
  • Quick-change composite nozzles (N3 series).
  • Uses low cost disposable filter cartridges.
  • Can be used as a soldering station with a Hakko FM2027 connector.
  • Gun or Pencil-style desoldering handpiece.
  • Less prone to clogging as compared to older desoldering stations when used on lead free applications.
  • Includes low temperature alarm, sleep mode functionality & auto power off.

Included:

  • FM2024-02 desoldering handpiece
  •  A1511 filter pipe assembly
  • B2972 control card
  • FH200-05 sleep stand iron holder
  • 599B-02 wire sponge tip cleaner
  • B2873 cleaning drill
  • B2876 nozzle remover
  • B2300 ESD safe heat resistant pad
  • A1514 ceramic paper filters

Kiesub Electronics is a leading distributor of Hakko soldering equipment.  Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.



Hakko FM-204 Solder/Desolder Station with FM2024-02 Desoldering Tool

Hakko FM-204 Solder/Desolder Station with FM2024-02 Desoldering Tool

The Hakko FM-204-01 ESD Solder/Desolder Station with FM2024-02 Desoldering Tool is a “self-contained” desoldering station offers dual functionality for both soldering and desoldering in one station in a single-port station.

  • Built in vacuum pump.
  • Meets or exceeds J-STD-001 requirements.
  • Auto sleep-mode.
  • Choose either gun or pencil style nozzle.
  • Quick-Change composite nozzle.
  • Works with FM-2027 Soldering Iron (not included).

Included:

  • FM-204 Desoldering Dtation.
  • FM2024-02 Desoldering Handpiece.
  • FH200-05 Iron Holder with 599B Tip Cleaner.
  • Cleaning Drill.
  • Nozzle Remover.
  • Ceramic paper filter.
  • Connector & Power  cords.
  • Key Card

Kiesub Electronics is a leading distributor of Hakko soldering equipment.  Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.



Hakko 485 850W Rework System with Shop Air Unit

Hakko 485 850W Rework System with Shop Air Unit

compatible with LEAD-FREE solder

The Hakko 485 Rework System ESD 850W with Shop Air Unit is a compact, high-performance soldering system developed exclusively for soldering and desoldering components and connectors mounted on PC boards.

Hakko 485 850W Rework System with Shop Air Unit features:

  •  Solder flow is time-controlled and temperature-controlled
  • soldering and desoldering cycles are automatic and precise
  • A built in locator light pinpoints the exact position for placing components
  • Solder remaining in through-holes is completely removed by using the Hakko 486 Air Blower (included with 485-V12)
  • A large selection of nozzle sizes available.
  • Power Comsumption: 850w
  • Temperature Range: normally up to 299°C (570°F)
  • Air Pressure: 2 kg/cm² (4.4 lbs.) – 10 kg/cm² (22 lbs.)

NOTE: Due to the increased use of lead free and other solder compositions, the 485 is shipped with an empty solder pot, saving time and effort for the end-user.

Kiesub Electronics is a leading distributor of Hakko soldering equipment.  Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.



Hakko FM-2022 Parallel Remover

Hakko FM-2022 Parallel Remover

  • Hot tweezers that enable easy removal of SMD chips and flat packages of up to 25mm in width.
  • Composite-type design with a built-in heater facilitates the replacement of soldering tips.
  • Used together with HAKKO FM-203 or HAKKO FM-206

Kiesub Electronics is a leading distributor of Hakko soldering equipment.  Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.



Hakko FM206-DSA 3-Port Rework Station

Hakko FM206-DSA 3-Port Rework Station

Hakko FM206-DSA 3-Port Rework Station

Free Ground Shipping!

Hakko FM206-DSA configuration:

FM-206 Rework Station with FM-2024-42 desoldering Iron, FM-2029-01 micro hot air pencil, and FM-2027-06 Soldering Iron and three stands.

The Hakko FM-206 3-Port Rework Station can power any Hakko FM Series handpiece, thus offering the ability for you to tailor the station to fit your specific rework needs. The station’s sleek, compact design minimizes loss of bench space and its powerful ports allow the use of the Hakko FM-2029 single hot air handpiece, and the Hakko FM-2030 heavy duty soldering iron, making this the ultimate rework station.

• Graphic User Interface for easy setup and operation
• 3 simultaneous powered ports
• Self-contained pump for vacuum and air flow
• Digital airflow indicator
• Configurable display in °C or °F
• High performance hot air handpiece ramps up to max temp in < 20 secs
• Capable of hot air rework of 0201, 01005 and up to 10x10mm QFNs
• Meets or exceeds ANSI J-STD-001
• Manual or Automatic profile for hot air
• Auto shutoff with sleep function
• Passcode protected
• Security lock to protect against theft or unauthorized re-location
• Integrates with the Hakko FR-830 and FR-870 Preheaters
• Low cost composite hot air nozzles
• Desoldering delay timer
• Optional footswitch for pump operation
• Option for external gas supply for hot air
• ESD safe by design
 NOTE: Tips and Nozzles are NOT included with station or any configuration

Kiesub Electronics is a leading distributor of Hakko soldering equipment.  Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.



Hakko FM-206-STA 3-Port Rework Station

Hakko FM-206-STA 3-Port Rework Station

Free Ground Shipping!

FM206-STA configuration:

FM-206 Rework Station with FM-2022 Parallel Remover, FM-2029 Hot Air Handpiece, and FM-2027 Soldering Iron.

The Hakko FM-206 3-Port Rework Station can power any Hakko FM Series handpiece, thus offering the ability for you to tailor the station to fit your specific rework needs. The station’s sleek, compact design minimizes loss of bench space and its powerful ports allow the use of the Hakko FM-2029 single hot air handpiece, and the Hakko FM-2030 heavy duty soldering iron, making this the ultimate rework station.

• Graphic User Interface for easy setup and operation
• 3 simultaneous powered ports
• Self-contained pump for vacuum and air flow
• Digital airflow indicator
• Configurable display in °C or °F
• High performance hot air handpiece ramps up to max temp in < 20 secs
• Capable of hot air rework of 0201, 01005 and up to 10x10mm QFNs
• Meets or exceeds ANSI J-STD-001
• Manual or Automatic profile for hot air
• Auto shutoff with sleep function
• Passcode protected
• Security lock to protect against theft or unauthorized re-location
• Integrates with the Hakko FR-830 and FR-870 Preheaters
• Low cost composite hot air nozzles
• Desoldering delay timer
• Optional footswitch for pump operation
• Option for external gas supply for hot air
• ESD safe by design
 NOTE: Tips and Nozzles are NOT included with station or any configuration

Kiesub Electronics is a leading distributor of Hakko soldering equipment.  Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.