Klein Tools 32585 Multi-Bit Electronics Screwdriver, 4-in-1, TORX Bits

Klein Tools 4-in-1 Electronics Screwdriver, featuring four TORX tamperproof bits in one tool, is designed for precision work. The swivel cap provides optimum control. Made of the highest quality tempered steel, carefully heat-treated for maximum strength, and precision milled to fit screw openings securely. Cushion-Grip handles offer outstanding comfort and control. Corrosion-resistant chrome plated barrel that holds two double-ended bits.

Electronics Screwdriver with four different tips in one tool
Includes T7, T8, T10 and T15 tamperproof TORX pin bits
Rotating cap for optimum control when working on small equipment
Corrosion-resistant chrome plated barrel includes two double-ended bits
Cushion-Grip handle for maximum comfort
Heat treated precision ground tip for greater strength
TORX is a registered trademark of Acument Intellectual Properties, LLC

Klein Tools 32525 Tamperproof Bit Set, 32 Piece

This assortment of tamperproof magnetic screwdriver bits are precision-machined for exact fit. The steel is heat treated for long-lasting use. The durable PVC gray block allows for easy storage. The block slides over most screwdriver shafts for easy bit access. The bits meet or exceed applicable ASME / ANSI specifications.

Durable PVC gray block allows for easy storage of tamperproof bits
Block slides over most screwdriver shafts for easy bit access and storage
Industrial strength, heat-treated steel bits for long-lasting use
Includes TORX, Metric Hex, Fractional Hex, Spanner, Tri-Wing, TORQ-SET bits and Square to Hex driver adaptor
Assembled in USA of US and imported components
TORX bits included: T7, T8, T10, T15, T20, T25, T27, T30 and T40. TORX is a registered trademark of Acument Intellectual Properties, LLC
Includes 3/32-Inch, 7/64-Inch, 1/8-Inch, 9/64-Inch, 5/32-Inch, and 3/16-Inch Fraction Hex bits
Metric Hex bits included: 2 mm, 2.5 mm, 3 mm, 4 mm, and 5 mm
Spanner bits included: 4, 6, 8, and 10
Tri-Wing bits included: 1, 2, 3, and 4

Klein Tools 32500MAG 11-in-1 Magnetic Screwdriver / Nut Driver

The integrated screwdriver / nut driver shaft on the 11-in-1 Magnetic Screwdriver/Nut Driver holds 8 popular tips and converts to 3 nut driver sizes. The shaft contains powerful Rare-Earth magnets for better fastener retention and is interchangeable for quick and easy switch out. The Cushion-Grip handle allows for greater torque and comfort. This versatile 11-in-1 multi-tool has everything the professional tradesperson needs to make the job a little easier.

Integrated screwdriver / nut driver magnetic barrel holds 8 popular tips and converts to 3 nut driver sizes
Strong, Rare-Earth magnets securely hold bits and fasteners
Industrial strength heat treated bits
Interchangeable shaft for quick and easy switch out
Cushion-Grip handle for greater torque and comfort
Includes tips: 3/8-Inch, 5/16-Inch and 1/4-Inch nut drivers, #1 and #2 Phillips, 1/4-Inch and 3/16-Inch slotted, T10 and T15 TORX, and #1 and #2 square recess
Blast-finished bit tips provide a firm hold and reduce cam-out
The following replacement bits are available: see Cat. No. 32482 (#1 Phillips and 3/16-Inch Slotted), Cat. No. 32483 (#2 Phillips and 1/4-Inch Slotted), Cat. No. 32484 (#1 Square and #2 Square), and Cat. No. 32485 (T10 TORX and T15 TORX)

Klein Tools 32500 Multi-Bit Screwdriver / Nut Driver, 11-in-1, Ph, Sl, Sq, TORX Bits

This versatile 11-in-1 multi-tool has everything the professional needs. The integrated screwdriver / nut driver shaft holds 8 popular tips and converts to 3 nut driver sizes. The blades are interchangeable for quick and easy switch out. The Cushion-Grip handle allows for greater torque and comfort. You’ll be reaching for this tool to meet your needs on the job.

Multi-bit screwdriver / nut driver shaft holds 8 popular tips and converts to 3 nut driver sizes
Includes industrial strength heat treated bits: 3/8-Inch, 5/16-Inch and 1/4-Inch nut drivers, #1 and #2 Phillips, 1/4-Inch and 3/16-Inch slotted, T10 and T15 TORX, and #1 and #2 square recess
Interchangeable blade for fast and easy switch out; comfortable Cushion-Grip handle
Blast finish bit tips provide a firm hold and reduce cam-out
The following replacement bits are available: see Cat. No. 32482 (#1 Phillips and 3/16-Inch Slotted), Cat. No. 32483 (#2 Phillips and 1/4-Inch Slotted), Cat. No. 32484 (#1 Square and #2 Square), and Cat. No. 32485 (T10 TORX and T15 TORX)
TORX is a registered trademark of Acument Intellectual Properties, LLC

Klein Tools 32476 Multi-Bit Screwdriver / Nut Driver, 5-in-1, Phillips, Slotted Bits

The Klein Tools 5-in-1 Screwdriver / Nut Driver features a patented tip-ident which quickly identifies the type of screwdriver and tip orientation. The driver contains head tips that are precision-machined for an exact fit.

Multi-bit Screwdriver / Nut Driver with Cushion-Grip handle for greater torque and comfort
End of handle is marked to quickly identify tool
Features 5/16-Inch (8 mm) nut driver plus #1 and #2 Phillips, 1/4-Inch and 3/16-Inch (7 mm and 5 mm) slotted screwdrivers
The following replacement bits are available:
#1 Phillips and 3/16-Inch [5 mm] Slotted (Cat. No. 32478)
#2 Phillips and 9/32-Inch [7 mm] Slotted (Cat. No. 32479)

Klein Tools 32327 27-in-1 Multi-Bit Precision Screwdriver with Tamperproof Bits

The 27-in-1 Multi-Bit Precision Screwdriver offers 26 specialty tamperproof tips conveniently stored in the handle plus an integrated 3.5 mm nut driver. The powerful Rare-Earth magnet in the stainless steel barrel securely holds both bits and fasteners. This screwdriver features industrial-strength bits as well as a Cushion-Grip handle with spin cap for outstanding comfort and control.

Multi-Bit Screwdriver features convenient on-board storage of 26 different tamperproof bits and a 3.5 mm nut driver
Barrel contains powerful Rare-Earth magnets for securing bits and fasteners
Industrial-strength, double-sided bits are conveniently housed in the handle, eliminating the need for a bulky bit block or case
Stainless steel barrel provides great impact and wear resistance
Spin cap for optimum and precise control
Cushion-Grip handle for maximum comfort
Includes Phillips #000, #00, #0, #1, #2; Slotted 1, 2, 2.5, 3, 3.5; Hex 0.9, 1.3, 1.5; Hex Security 2, 2.5, 3, 3.5; TORX T3, T4; TORX Security T5H, T6H, T7H, T8H, T9H, T10H, T15H bits
TORXis a registered trademark of Acument Intellectual Properties, LLC.

Platinum Tools 19110 1KV Insulated Precision Screwdriver Set 6 pc

Platinum Tools 19110 1KV Insulated Precision Screwdriver Set 6 pc

Convenient set of insulated, precision slotted, and Phillips screwdrivers in plastic storage/carrying case. The screwdrivers provide shock protection to 1000 VAC and complies with VDE safety standard VDE-400009250.

Features:
• Black oxide tip
• Dual-compound handle
• Provides shock protection to 1000v AC
• Complies with VDE safety standard VDE-400009250

Bits Included:

Slotted: 0.23×1.5×65 / 0.4×2.0x65 / 0.4×2.5×65
Phillips: PH00x65 / Ph0x65 / PH1X65

Platinum Tools 19003C PRO 6-in-1 Security Screwdriver

Platinum Tools 19003C PRO 6-in-1 Security Screwdriver

This ergonomically designed Security Screwdriver has a high impact plastic core covered in a comfortable cushion grip handle. These features allow the Security Screwdriver to be used for extended periods of time without hand fatigue or stress. Multiple bit loads included for various applications.

Bits Included:

Security Torx® T15, T20, T25,T30
Nut Drivers: 1/4″, 5/16″

Platinum Tools 19001C 6-in-1 Screwdriver

Platinum Tools 19001C 6-in-1 Screwdriver

This versatile tool is a must have for any tool belt. No more searching for the right tool! Double-ended reversible bits with ball detent retention. S2 alloy steel bits for long life. Molded, ergonomic high impact plastic handle.

Bits Included:

Phillips #1, 2
Slotted #5, 7
Nut Drivers 1/4

Klein Tools 32799 Pro Impact Power Bit Set, 26 Piece

Klein Tools has designed a set of Impact Power Bits for the professional electrician. All the bits are made of high-impact rated S2 steel and color coded for easy identification. The 1-1/4-Inch (6.4 mm) long driver bits are easier to grip than a standard 1-Inch (25.4 mm) bit. The bit holder and nut drivers have strong magnets, and are also designed longer so they reach easily into junction boxes. Minimal chamfering on the nut drivers’ hex pockets increases surface contact between the nut and driver for better performance. All 26 pieces fit snugly in a durable, impact-resistant case featuring steel hinges, a stay-shut latch, and a hidden compartment for loose bits.

Longer pro impact power bits and drivers are designed to reach easily into boxes and panels
S2 Impact-Rated Steel for maximum life and a 1/4-Inch hex shank
4-Inch bit extension with strong magnet to keep bits in place
1-1/4-Inch precision machined bits are longer and easier to grip
2-5/8-Inch nut drivers reach easily into junction boxes
Extended 4-Inch Phillips and Square bits for hard-to-reach fasteners
Bits are easy to find and fit securely in the storage case
Case has a spring loaded stay-shut latch and a hidden storage area for loose bits
Phillips, square, and combo tips are color coded by size: green- #1 size bits, red- #2 size bits, black- #3 size bits
Slotted tips and nut drivers use ASME standard color coding

Klein 65200 Electrician’s Mini Ratchet Set, 5pc

The Electrician’s Mini Ratchet Set is the perfect solution for fastening in small, tight spaces. The 72-tooth, low-profile gearhead only needs 5-degrees of sweep, allowing professionals to fasten in spots other drivers just won’t fit. The set includes a ¼-inch and 5/16-inch dual-drive head, socket adapter, and 4 screwdriver bits.

Slim profile of the professional Mini Ratchet 5-Piece Set is the perfect tool for tight spaces
Includes 1/4 and 5/16-Inch nut drivers, a 1/4-Inch adapter and four drive bits: #1 and #2 Phillips; 3/16 and 1/4-Inch slotted
1/4-Inch dual-drive head and socket adapter for more versatility
The 72-tooth ratchet only needs a 5-Degree sweep for tight areas
High-strength, steel construction increases torque and tool life

Klein Tools 44217 Electrician’s Pocket Knife with #2 Phillips

Klein Tools 44217 Electrician’s Pocket Knife with #2 Phillips

The Klein Tools 44217 Electrician’s knife: it’s a stripper and a driver too. This knife has three wire stripping notches on the back of the full-sized, stainless steel drop point blade, as well as featuring a handy No. 2 Phillips screwdriver smartly tucked into the handle. Klein Tools pocket knives are high quality, easy to carry and durable with long-lasting, sharp blades. The Electrician’s Pocket Knife is three tools in one, saving multiple trips to the tool bag.

Features:

Full sized, fine edge drop point blade made of 440A stainless steel
Three wire stripping notches on the back of the blade (sizes: 10 SLD/12 STR, 12 SLD/14 STR and 14 SLD/ 16 STR)
No. 2 Phillips driver, the most versatile size
Liner locking blade secures the blade when open
Screwdriver is liner locking and folds smartly into the handle
Rugged aluminum handle
Pocket clip for easy storage

Klein Tools 32581 4-in-1 Electronics Screwdriver

Klein Tools 32581 4-in-1 Electronics Screwdriver

Featuring 4 Different Bits in One Miniature Tool!

Four different bits in one tool!

Includes #0 and #00 Phillips plus 1/8”and 3/32” Slotted tips

Rotating cap for optimum and precise control

Cushion-Grip handles for maximum comfort when working on small equipment

Heat-treated precision ground tip for greater strength

The new 4-in-1 Electronics Screwdriver features four different bits in one tool. Designed for precision work, this multi-purpose tool features a rotating cap for optimum control when working on small equipment.

Made of the highest quality tempered steel, carefully heat-treated for maximum strength and precision machined to fit screw openings securely. Cushion-Grip handles offer outstanding comfort.

Includes #0 and #00 Phillips plus 1/16”and 3/32” Slotted

Klein Tools 32751 Adjustable Length Screwdriver 4” to 8”

Klein Tools 32751 Adjustable Length Screwdriver 4” to 8”

The Klein Tools 32751 Adjustable Length screwdriver features a shaft that adjusts anywhere from 4″ to 8″ (102-127 mm) for numerous length choices. The shaft is removable and reversible with a different tip on each end.

Klein Tools 32751 features:

Removable shaft adjusts within 4” to 8” (102-127 mm) range for numerous length combinations.
Blades feature #2 Phillips and 1/4” Slotted tip for multiple screwdrivers in one tool.
Proprietary system securely holds blade
Press down to extend or lengthen the shaft.
Push up to retract or shorten the shaft.
Cushion-Grip handle for maximum comfort and torque.

Klein Tools VDV001-081 8-in-1 Punch Down Screwdriver Multi-Tool

Klein Tools VDV001-081 8-in-1 Punch Down Screwdriver Multi-Tool

Klein Tools VDV001-081 Punch down screwdriver multi-tool can terminate and cut wire in one step with included 110/66 combination cut-type punchdown blade with precision ground cutting edge.

Non-impact wire termination.

Machine-tooled steel bits for superior strength.

Heavy-duty blade barrel provides storage for bits.

Bayonet-style (twist & lock) socket accepts most manufacturers’ punchdown blades.

Cushion-Grip handle for greater torque and enhanced comfort.

Tip-Ident® for quick identification of tool.

Two Phillips screwdriver tips: #1 and #2.

Two slotted screwdriver tips: 3/16” (5 mm) and 1/4” (6 mm).

Two nut drivers: 1/4” (6 mm) and 3/8” (10 mm).

One hex key: 3/8”.

Klein tools A000 Midget Screwdriver

Klein Tools A000 Midget Screwdriver

Klein Tools A000 Midget Screwdriver has a keystone tip and is specially designed for delicate instrument work. The smooth Comfordome handle fits the palm of the hand comfortably

Keystone-tip screwdriver specially designed for delicate instrument work.
Tough amber, smooth Comfordome handle fits in the palm of the hand comfortably.
Chrome-plated shaft helps prevent corrosion.
Internal flanges provide solid, twist-resistant shaft anchor.
Nickel-chrome, precision-forged and polished blades with black tips.
Meets or exceeds applicable ASME / ANSI specifications.

Overall Length: 2-7/8-Inch.

Shank Length: 1-1/2-Inch.

Shank Tip Width: 3/32-Inch.

Weight: 0.02-Pound.

Klein Tools 85076 7 Piece Cushion-Grip Screwdriver Set

Klein Tools 85076 7 Piece Cushion-Grip Screwdriver Set

The Klein Tools 85076 7-Piece Cushion-Grip Screwdriver Set is a general-purpose selection of the most frequently used screwdrivers. The set includes three cabinet-tip, two Phillips-tip and two keystone-tip styles. Each screwdriver features Klein’s patented Tip-Ident which allows quick identification of the type of screwdriver and tip orientation.

Contains Klein part numbers 600-4, 602-6, 601-3, 601-6, 605-4, 603-3, 603-4 and a reusable plastic container. Weight: 1.50-Pound.

Klein Tools 627-20 Six-In-1 Tapping Tool

Klein Tools 627-20 Six-In-1 Tapping Tool

Klein Tools 627-20 Features: Quickly forms new threads, reforms burred threads, and cleans out plaster obstructions Each tap size rethreads to next larger size if threads are stripped Two high-carbon steel taps are secured in reversible holder

Quickly forms new threads, reforms burred threads and cleans out plaster obstructions
Each tap size rethreads to next larger size if threads are stripped
Two high-carbon steel taps are secured in reversible holder
6-32, 8-32, 10-32, 10-24, 12-24 and 1/4-20 tap sizes
7-5/8-Inch overall length