Xcelite 51CGNN Utility Pliers

Xcelite 1178MN 5-5/8in ESD Safe Heavy-Duty Shearcutter

Weller Xcelite heavy duty Shearcutter with blue cushion grips is ESD safe and designed for IC pins, cables, and harnesses

Xcelite 50CGV Utility Pliers

Xcelite 101SNV 5in Wire Stripper

Weller Xcelite 5in Wire Stripper can strip up to 22-8 AWG and has maximum leverage.

Xcelite 43HVN 5-1/2in Serrated Jaw Curved Nose Seizer

Weller Xcelite 5 1/2in Curved Nose Seizer with Serrated jaw has a box-joint construction with 3-position snap lock to firmly clamp wires for soldering.

Weller Xcelite Curved Nose Seizer with Serrated jaw, box-joint construction with 3-position snap lock, 5 1/2in, carded
Clamps firmly to hold wires for soldering
Acts as a heat sink and retrieves small parts from hard-to-reach places
Precision-machined from perfectly tempered stainless steel
Box-joint construction 3-position snap lock

Xcelite 42HVN 5-1/2in Serrated Jaw Straight Nose Seizer

Weller Xcelite 5 1/2in Straight Nose Seizer with Serrated jaw has a box-joint construction with 3-position snap lock to firmly clamp wires for soldering.

Weller Xcelite Straight Nose Seizer with Serrated jaw, box-joint construction with 3-position snap lock, 5 1/2in, carded
Clamps firmly to hold wires for soldering
Acts as a heat sink and retrieves small parts from hard-to-reach places
Precision-machined from perfectly tempered stainless steel
Box-joint construction 3-position snap lock

Xcelite 2ASASL 4-1/2in Straight Flat Round Tip Precision Tweezers

Weller Erem has a wide range of Tweezers, each designed to be strong, comfortable and precise. Manufactured with uncompromising quality and created for worldwide applications, including electronics assembly and healthcare, Weller Erem Tweezers are built to last. Feel the difference with Weller Erem the proven choice. Every time.

Suitable for all standard gripping applications and assembly jobs on printed-circuit boards, e.g. in the goldsmith and jewelry industries
Special stainless steel, nonmagnetic, non-rusting, acid-proof, heat-resistant
Same as 2ASA, but economy model.
Tip width 2 mm/.078 Inch.

Xcelite 175MN 5in ESD Safe General Purpose Low Profile Shearcutter with Safety Clip

Weller Xcelite Low profile, general-purpose cutter can flush cut wire up to 20 AWG with less User effort and is ESD safe.

Low profile, general-purpose cutter
Superior blade by-pass shear cutting action
Better cuts with half the effort

Xcelite 170MN 5in ESD Safe General Purpose Low Profile Shearcutter

Weller Xcelite Low profile, general-purpose cutter is ESD safe and has superior blade by-pass shear cutting access to reduce component damage.

Low profile, general-purpose cutter
Superior blade by-pass shear cutting action
Greatly reduced mechanical shock delivered to the work

Xcelite 1178MN 5-5/8in ESD Safe Heavy-Duty Shearcutter

Weller Xcelite heavy duty Shearcutter with blue cushion grips is ESD safe and designed for IC pins, cables, and harnesses

Weller Xcelite heavy duty Shearcutter with blue cushion grips is designed for IC pins, cables, and harnesses
Shearcutter flush cutting tools require less than half the operator force of most wire and lead cutting tools and transmit proportionately less shock to the component
Flush cutting for precise tip cutting and delicate applications which require minimal shock transmittal and wire tip inpinchin

Xcelite 101SNV 5in Wire Stripper

Weller Xcelite 5in Wire Stripper can strip up to 22-8 AWG and has maximum leverage.

Cuts and strips both solid and stranded wire cleanly, neatly
Adjustable screw stop for different wire sizes
Hardened with ground blades

Jonard Tools VFL-150 Visual Fault Locator Kit

Designed to detect fiber breakpoints, fiber leaks, poor connections, and stress points, this visual fault locator is perfect for field personnel detecting faults in fiber optic cables. This VFL Kit features the following:

Includes adapter for 1.25 mm LC connectors
650 nm Class IIIA laser diode identifies faults in single and multi-mode fiber up to 3 miles long
Universal connector accommodates 2.5 mm ferruled connectors, such as FC, SC, and ST connectors
Has three different modes: Continuous wave, pulsing, and slower pulsing mode
Works in OTDR dead zones and is used for end-to-end visual fiber identification
Light and portable pen-style design is perfect for on the go use
60 hours of battery life powered by two AAA batteries (included)

Jonard Tools JIC-22035NT/10 Probe Picks (Spudger pack of 10)

Designed with an uninsulated L-shaped wire hook extension on one end and a 3/16″ wide flat notched end on the other, this probe pick is perfect for guiding, probing, separating, and removing wire and insulation debris from network punch-down panels and jacks. This probe pick features the following:

Two small notches on the flat end help grasp wires and electrical contacts
Made of a resiliant ABS material for high durability and insulating properties
Can also be used to probe electrical contacts without damaging them
Includes (10) probe picks without shrink tubing

Jonard Tools JIC-186 Wire & Kevlar Cutting Shears

The Jonard Tools JIC-186 Wire and Kevlar Cutting Shears are designed to cut Kevlar, cabling insulation, tape, cable ties, and other materials with ease. These cutting shears feature the following:

High carbon stainless steel blades are heat-treated to HRC 58-60 for longer life and durability
Handles are made of dual component nylon and Santoprene material and are ergonomically designed for superior comfort and long term durability
Adjustable with joint screw under the protective cap
Serrated blade for gripping as well as sharp and durable cutting

Jonard Tools EX-6 PLCC Extractor (20-128 Pins)

Designed to extract Plastic Leaded Chip Carriers (PLCC) without damaging them, this PLCC Extractor is perfect for removing PLCCs with 20-128 pins. This DIP/IC Extractor features the following:

Spring-loaded design requires no pulling at all, simply squeeze the handles and the chip is lifted from the socket
Stainless steel construction provides long life and durability

Jonard Tools EX-5 PLCC Extractor (20-128 Pins), ESD Safe

Designed to extract Plastic Leaded Chip Carriers (PLCC) without damaging them, this PLCC Extractor is perfect for removing PLCCs with 20-128 pins. This DIP/IC Extractor features the following:

ESD-safe housing protects the chips from accidental static discharge
Spring-loaded design requires no pulling at all, simply squeeze the handles and the chip is lifted from the socket
Stainless steel construction provides long life and durability

Jonard Tools EX-2 DIP/IC Extractor (24-40 Pins)

Designed to extract internal components from DIP Sockets as well as LSI, MSI, and SSI Devices, this DIP/IC Extractor is perfect for removing chips with 24-40 pins. This DIP/IC Extractor features the following:

Built-in grounding lug helps protect from short circuiting or static discharge
Specially designed hooks firmly grasp chips without damaging them.

Hakko TRR-58-G Macro Cutter

Very strong tool for a flush cut, suitable, apart from work in electronics and can also be used for jewelry and for cutting rubber seals.
This tool is a very strong flush cut tool with a wide head and long handles. Aside from work in electronics, goldsmiths use this tool to cut rubber seals.

Cutting Force: 15 kg
Cut: Flush
Max cut: 10 AWG copper wire
Center Screw: NA
Safety clip: NA

Hakko TR-30-58 Medium Cutter

Tool for a chamfered cut. The special treatment of blades make this tool particularly suitable for the cutting of ferrous material. Safety clip for holding wire scraps securely after cutting available (order part number TR-30-58-A). Safety clip type AL.

Chamfered cutting tool
Special treatment of the blades makes this tool particularly suitable for cutting ferrous material
Cutting Force: 8.5 kg
Cut: Chamfered
Max cut: 14 AWG copper wire
Handle: NA
Part Number (with safety clip): TR-30-58-A

Hakko TR-30 Medium Cutter

Tool for a flush cut. One of the most popular cutting tool. Safety clip for holding wire scraps securely after cutting available (order part number TR-30-A). Safety clip type AL.

Tool for a flush cut
Similar to the TR-25 but with stronger blades
As an added bonus, the tool exhibits longer life due to its thicker steel
Cutting Force: 5.5 kg
Cut: Flush
Max cut: 16 AWG copper wire
Handle: NA
Part Number (with safety clip): TR-30-A