PLATINUM 100054BL REPLACEMENT BLADE SET

PLATINUM 100054BL REPLACEMENT BLADE SET 4PC

100054BLEZ-RJ PRO™ HD Replacement Blade Set. 4 pc. Clamshell.

Brand	Platinum Tools
Color	Platinum
Item Weight	16 ounces
Grip Type	Ergonomic
UPC	849160001621

Platinum Tools 100004BL Replacement Blades for EZ-RJ45 Crimp Tool (2-Pack)

Platinum Tools 100004BL Replacement Blades for EZ-RJ45 Crimp Tool (2-Pack)

Key Features

Set of Two Replacement Blades
Maintain Optimum Tool Performance

Keep your EZ-RJ45 performing at its best with a two-pack of the 100004BL Replacement Blades for EZ-RJ45 Crimp Tool from Platinum Tools.

Wright 1152 1-5/8″ Combination Wrench

Wright Tool 1152 1-5/8-Inch 12-Point Combination Wrench.

Features:

Patented WrightGrip� technology provides unparalled tool-to-fastener contact resulting in a superior anti-slip combination wrench.
Forged and Machined for Best Fit and Unyielding Strength
Easy to read stamp pattern in order to quickly determine opening size
Made in the USA. Designed, Engineered and Manufactured in Barberton, OH
Meets and exceeds ASME B107 hand tool standards

Specifications

Size: 1-5/8 (in)

Finish: Satin

Tool Type: Combination Wrench

MPN: 1152

UPC: 076799011527

Jonard Tools VFL-150 Visual Fault Locator Kit

Designed to detect fiber breakpoints, fiber leaks, poor connections, and stress points, this visual fault locator is perfect for field personnel detecting faults in fiber optic cables. This VFL Kit features the following:

Includes adapter for 1.25 mm LC connectors
650 nm Class IIIA laser diode identifies faults in single and multi-mode fiber up to 3 miles long
Universal connector accommodates 2.5 mm ferruled connectors, such as FC, SC, and ST connectors
Has three different modes: Continuous wave, pulsing, and slower pulsing mode
Works in OTDR dead zones and is used for end-to-end visual fiber identification
Light and portable pen-style design is perfect for on the go use
60 hours of battery life powered by two AAA batteries (included)

Jonard Tools JIC-22035NT/10 Probe Picks (Spudger pack of 10)

Designed with an uninsulated L-shaped wire hook extension on one end and a 3/16″ wide flat notched end on the other, this probe pick is perfect for guiding, probing, separating, and removing wire and insulation debris from network punch-down panels and jacks. This probe pick features the following:

Two small notches on the flat end help grasp wires and electrical contacts
Made of a resiliant ABS material for high durability and insulating properties
Can also be used to probe electrical contacts without damaging them
Includes (10) probe picks without shrink tubing

Jonard Tools JIC-186 Wire & Kevlar Cutting Shears

The Jonard Tools JIC-186 Wire and Kevlar Cutting Shears are designed to cut Kevlar, cabling insulation, tape, cable ties, and other materials with ease. These cutting shears feature the following:

High carbon stainless steel blades are heat-treated to HRC 58-60 for longer life and durability
Handles are made of dual component nylon and Santoprene material and are ergonomically designed for superior comfort and long term durability
Adjustable with joint screw under the protective cap
Serrated blade for gripping as well as sharp and durable cutting

Jonard Tools EX-6 PLCC Extractor (20-128 Pins)

Designed to extract Plastic Leaded Chip Carriers (PLCC) without damaging them, this PLCC Extractor is perfect for removing PLCCs with 20-128 pins. This DIP/IC Extractor features the following:

Spring-loaded design requires no pulling at all, simply squeeze the handles and the chip is lifted from the socket
Stainless steel construction provides long life and durability

Jonard Tools EX-5 PLCC Extractor (20-128 Pins), ESD Safe

Designed to extract Plastic Leaded Chip Carriers (PLCC) without damaging them, this PLCC Extractor is perfect for removing PLCCs with 20-128 pins. This DIP/IC Extractor features the following:

ESD-safe housing protects the chips from accidental static discharge
Spring-loaded design requires no pulling at all, simply squeeze the handles and the chip is lifted from the socket
Stainless steel construction provides long life and durability

Jonard Tools EX-2 DIP/IC Extractor (24-40 Pins)

Designed to extract internal components from DIP Sockets as well as LSI, MSI, and SSI Devices, this DIP/IC Extractor is perfect for removing chips with 24-40 pins. This DIP/IC Extractor features the following:

Built-in grounding lug helps protect from short circuiting or static discharge
Specially designed hooks firmly grasp chips without damaging them.

Hakko TRR-58-G Macro Cutter

Very strong tool for a flush cut, suitable, apart from work in electronics and can also be used for jewelry and for cutting rubber seals.
This tool is a very strong flush cut tool with a wide head and long handles. Aside from work in electronics, goldsmiths use this tool to cut rubber seals.

Cutting Force: 15 kg
Cut: Flush
Max cut: 10 AWG copper wire
Center Screw: NA
Safety clip: NA

Hakko TR-30-58 Medium Cutter

Tool for a chamfered cut. The special treatment of blades make this tool particularly suitable for the cutting of ferrous material. Safety clip for holding wire scraps securely after cutting available (order part number TR-30-58-A). Safety clip type AL.

Chamfered cutting tool
Special treatment of the blades makes this tool particularly suitable for cutting ferrous material
Cutting Force: 8.5 kg
Cut: Chamfered
Max cut: 14 AWG copper wire
Handle: NA
Part Number (with safety clip): TR-30-58-A

Hakko TR-30 Medium Cutter

Tool for a flush cut. One of the most popular cutting tool. Safety clip for holding wire scraps securely after cutting available (order part number TR-30-A). Safety clip type AL.

Tool for a flush cut
Similar to the TR-25 but with stronger blades
As an added bonus, the tool exhibits longer life due to its thicker steel
Cutting Force: 5.5 kg
Cut: Flush
Max cut: 16 AWG copper wire
Handle: NA
Part Number (with safety clip): TR-30-A

Hakko TR-20-M Micro Cutter

Tool for a flush cut. The reduced head s dimension and its pointed shape, allow access to difficult to reach areas. Safety clip for holding wire scraps securely after cutting available (order part number TR-20-M-A). Safety clip type AF.

The small head and anatomic design makes this an ideal cutter for working in tight spaces.

Cutting Force: 3 kg
Cut: Flush
Max cut: 20 AWG copper wire

Hakko PN-2007 Long Nose Pliers

The PN-2007 is a serrated, flat long nose pliers ideal to be used in difficult to reach areas.

For delicate work in tight areas
32mm long jaw with 3.0mm nose
Nose: Flat
Jaws: Serrated
Outside Edge: Flat

Hakko PN-2006 Long Nose Pliers

The PN-2006 is a smooth, pointed long nose pliers ideal to be used in difficult to reach areas.

For delicate work in tight areas
32mm long jaw with 1.2mm nose
Nose: Pointed
Jaws: Smooth
Outside Edge: Flat

Hakko PN-2002-PM Pointed Nose Pliers

Smooth, 45 degree angled long nose pliers with rounded external edges. Thanks to its shape, it gives a wide angle of vision of the work area.

Thin, short pliers for very delicate work
Angled to 45 degrees
16mm jaw with 1mm nose
Nose: Pointed
Jaws: Smooth
Outside Edge: Rounded

Hakko PG4-1-D T7 x 50 mm. Torx Tip Screwdriver

CHP screwdrivers feature ergonomic handles with a tapered soft grip for operator comfort. A rotating cap at the fingertip allows for better control and quick fastening. Available in standard and ESD-safe grips with Slot, Phillips, Pozidrive and Torx tips.

Head: T7
Head : 3.5 mm
Shaft Length: 60 mm
Total Length: 150 mm

Hakko PG4-0 T6 x 50 mm. Torx Tip Screwdriver

Head: T6
Head : 3.5 mm
Shaft Length: 50 mm
Total Length: 150 mm