Klein Tools D2000-9NE Lineman’s Plier, 9-inch

These Lineman’s Side-Cutting pliers feature induction hardened cutting knives for long life. The 2000 series blades are designed for heavy-duty cutting of ACSR, screws, nails, and most hardened wire. The high-leverage design provides 46-Percent greater cutting power than other plier designs. Exclusive handle tempering absorbs the ”snap” when cutting wire. Pick up these Klein’s and feel the difference.

Cuts ACSR, screws, nails and most hardened wire
High-leverage design. Rivet is closer to the cutting edge for 46-percent greater cutting and gripping power than other plier designs
Induction hardened cutting knives for long life
Hot-riveted joint ensures smooth action and no handle wobble
Streamlined design with sure-gripping, cross-hatched knurled jaws
Unique handle tempering helps absorb the ”snap” when cutting wire
Precision-hardened plier head for on-the-job toughness
Custom, US-made tool steel
Plastic-dipped handles for comfort and ease of identification
”Handform” handles for full gripping and cutting power
Features combination polished and black-oxide finish

MADE-USA-EN Product Icon

Klein Tools 32799 Pro Impact Power Bit Set, 26 Piece

Klein Tools has designed a set of Impact Power Bits for the professional electrician. All the bits are made of high-impact rated S2 steel and color coded for easy identification. The 1-1/4-Inch (6.4 mm) long driver bits are easier to grip than a standard 1-Inch (25.4 mm) bit. The bit holder and nut drivers have strong magnets, and are also designed longer so they reach easily into junction boxes. Minimal chamfering on the nut drivers’ hex pockets increases surface contact between the nut and driver for better performance. All 26 pieces fit snugly in a durable, impact-resistant case featuring steel hinges, a stay-shut latch, and a hidden compartment for loose bits.

Longer pro impact power bits and drivers are designed to reach easily into boxes and panels
S2 Impact-Rated Steel for maximum life and a 1/4-Inch hex shank
4-Inch bit extension with strong magnet to keep bits in place
1-1/4-Inch precision machined bits are longer and easier to grip
2-5/8-Inch nut drivers reach easily into junction boxes
Extended 4-Inch Phillips and Square bits for hard-to-reach fasteners
Bits are easy to find and fit securely in the storage case
Case has a spring loaded stay-shut latch and a hidden storage area for loose bits
Phillips, square, and combo tips are color coded by size: green- #1 size bits, red- #2 size bits, black- #3 size bits
Slotted tips and nut drivers use ASME standard color coding

Klein 65200 Electrician’s Mini Ratchet Set, 5pc

The Electrician’s Mini Ratchet Set is the perfect solution for fastening in small, tight spaces. The 72-tooth, low-profile gearhead only needs 5-degrees of sweep, allowing professionals to fasten in spots other drivers just won’t fit. The set includes a ¼-inch and 5/16-inch dual-drive head, socket adapter, and 4 screwdriver bits.

Slim profile of the professional Mini Ratchet 5-Piece Set is the perfect tool for tight spaces
Includes 1/4 and 5/16-Inch nut drivers, a 1/4-Inch adapter and four drive bits: #1 and #2 Phillips; 3/16 and 1/4-Inch slotted
1/4-Inch dual-drive head and socket adapter for more versatility
The 72-tooth ratchet only needs a 5-Degree sweep for tight areas
High-strength, steel construction increases torque and tool life

Klein Tools Rechargeable Personal Jobsite Fan

Klein Tools Rechargeable Personal Jobsite Fan

Klein Tools personal fan has multiple mounting options keeping the fan off the dirty job site floor. Whether you mount it or simply sit the fan on a flat surface, airflow can be aimed in any direction with a fan cage that both rotates and spins 360 degrees. At 10-1/2-Inch tall, this fan is the ideal size to carry every day while producing powerful flow of air when it’s hot and stuffy on the job.

Personal fan has multiple mounting options perfect for the job site
Arm base rotates and cage spins 360 degrees to aim airflow in any direction
Incorporated into the base are two powerful magnets and a hang hole for mounting
Base forms a strong clamp for attaching to studs or conduit
Features two long-lasting fan modes: Low for 9 hours; High for 5 hours
LED battery gauge indicates charge level
Charges via USB-C, charging cable included

Klein Tools Cooling Bandana

Klein Tools Cooling Bandana

Helps you cool down during and after hard work or strenuous activities. The PVA material has extraordinary absorbent properties that allow it to retain moisture and stay cooler than ambient air around it. Machine or hand wash; air dry.

Advanced PVA cooling technology
Feels cooler than ambient air temperature
Activates quickly; under a minute!
Stays cool for hours
Multi-use; reactivate several times
2-Inch x 35.5-Inch (51 x 902 mm)
To activate or re-use, wet bandana and gently wring out the excess water
Machine or hand wash with mild detergent; air dry only

Klein Tools Neck and Face Cooling Band

Can be worn wet or dry and has UPF 50 protection. Cooling is immediate after getting wet and will last for hours. This cooling band is made with super evaporative performance knit fabric. Anti-odor treatment provides long lasting freshness. Wear under a hard hat or alone.

This cooling band is designed using super evaporative performance knit fabric
Anti-odor treatment for long lasting freshness
Seamless, moisture-wicking fabric can be worn wet or dry
When wet, cooling is instant and can last for hours
UPF 50 sun protection from harmful UV rays
Versatile cooling band can be worn many ways
Can be worn by itself or under a hard hat
One Size Fits Most
Reflective accents
Machine washable

Klein Tools Cooling Towel

Klein Cooling Towel helps you cool down during and after hard work or strenuous activities. The PVA material has extraordinary absorbent properties that allow it to retain moisture and stay cooler than ambient air around it. Stays cool for hours. Machine washable.

Advanced PVA cooling technology
Feels cooler than ambient air temperature
Activates quickly; under a minute!
Stays cool for hours
Multi-use; reactivate several times
13-Inch x 29.5-Inch (330 mm x 749 mm)
To activate or re-use, wet the towel and gently wring out the excess water
Machine or hand wash with mild detergent; air dry only
Store damp in storage tube with cap off for daily use

Platinum 100072BL EZ-RJ45 Die Replacement Blade

Replacement blade specifically for the EZ-RJ45® Die. A sharp blade assures your tool will neatly trim the wire from the ends of the connectors for crisp, clean crimps every time. Always have a spare on hand.

Replacing blade improves the performance of your termination
Compatible with EZ-RJ45® Die
Qty 2

Platinum 100072C EZ-RJ45® Die for EXO Crimp Frame

The patented EZ-RJ45® Die is used with the EXO Crimp Frame™ to terminate EZ-RJ45® connectors. The EZ-RJ45® Die is interchangeable and reversible when used with EXO Crimp Frame™. Designed for the original pass through EZ-RJ45® connectors which have been a standard in this industry for many years.

Single cycle crimp and flush trim
EZ-RJ45® Die is easily interchangeable
Reversible EZ-RJ45® Die for ambidextrous operation
Connectors lock into tool for correct positioning during crimp
Compatible with EZ-RJ45 connectors: EZ-RJ45 Cat5e and Cat6, Shielded Cat5e and Cat6 connectors (internal and external ground)

Platinum 100071BL EXO-EX Die™ Replacement Blade

Platinum 100071BL EXO-EX Die™ Replacement Blade

Replacement blade specifically for the EXO-EX Die™. A sharp blade assures your tool will neatly trim the wire from the ends of the connectors for crisp, clean crimps every time. Always have a spare on hand.

Replacing blade improves the performance of your termination
Compatible with EXO-EX Die™ only
Qty 2

Platinum 100071C EXO-EX Die™

Platinum 100071C EXO-EX Die™

The patented EXO-EX Die™ is used with the EXO Crimp Frame™ to terminate ezEX-RJ45™connectors (typically used in Cat6 and Cat6A). The EXO-EX Die is interchangeable and reversible when used with EXO Crimp Frame. Designed for the new ezEX-RJ45™connectors (ezEX™44 and ezEX™48). The ezEX-RJ45™ connectors are an RJ45 pass through connector, developed for larger cables and conductors. Integrated Hi-Lo stagger for improved performance and one piece design pass through system.

Single cycle crimp and flush trim
Easily interchangeable
Reversible for ambidextrous operation
Connectors lock into tool for correct positioning during crimp
Compatible with ezEX™44 and ezEX™48 connectors
Terminates larger cables and conductors Cat6 and Cat6A

Platinum 100062C EXO Crimp Frame™+ EZ-RJ45® Die

Platinum 100062C EXO Crimp Frame™ EZ-RJ45® Die

The patented EXO Crimp Frame EZ-RJ45® Die was designed for termination of EZ-RJ45® connectors. The included EZ-RJ45® Die is interchangeable and reversible when used with EXO Crimp Frame. Designed for the original pass through EZ-RJ45® connectors which are a standard in the industry. The EXO Crimp Frame highlights a push button lock, ergonomic TPR handles, and works with the EXO-EX Die™ (P/N 100071C) for terminating ezEX-RJ45™ connectors.

Single cycle crimp and flush trim
EZ-RJ45® Die is easily interchangeable
Reversible EZ-RJ45 Die for ambidextrous operation
Connectors lock into tool for correct positioning during crimp
Push button lock for easy storage
Ergonomic comfort grip TPR handles
Includes the EZ-RJ45® Die for crimping EZ-RJ45®

EXO Crimp Frame works with EXO-EX™ Die for crimping ezEX-RJ45™ connectors

Platinum 100061C EXO Crimp Frame™ with EXO-EX Die

The patented EXO Crimp Frame™ EXO-EX Die™ was developed to terminate larger cables and conductors (typically Cat6/6A). EXO Crimp Frame™ EXO-EX Die™ is designed for the ezEX-RJ45™ connectors. The ezEX-RJ45™ connectors are an RJ45 pass through connector, developed for larger cables and conductors. Integrated Hi-Lo stagger for improved performance, one piece design pass through system. The EXO Crimp Frame has a patented push button lock, ergonomic TPR handles and works with the EZ-RJ45® Die for terminating EZ-RJ45® connectors.

Single cycle crimp and flush trim
EXO Die™ is easily interchangeable
Reversible EXO Die™ for ambidextrous operation
Connectors lock into tool for correct positioning during crimp
Push button lock for easy storage
Ergonomic comfort grip TPR handles
Includes EXO-EX Die™ for crimping ezEX™44 and ezEX™48 connectors
Terminates larger cables and conducts Cat6 and Cat6A

EXO Crimp Frame works with EZ-RJ45® Die for crimping EZ-RJ45® connectors.

Insulation Diameter (Conductor) size range: 0.039” to 0.048”

Max Outer Diameter: .290” (7.36mm)

Klein Tools 44217 Electrician’s Pocket Knife with #2 Phillips

Klein Tools 44217 Electrician’s Pocket Knife with #2 Phillips

The Klein Tools 44217 Electrician’s knife: it’s a stripper and a driver too. This knife has three wire stripping notches on the back of the full-sized, stainless steel drop point blade, as well as featuring a handy No. 2 Phillips screwdriver smartly tucked into the handle. Klein Tools pocket knives are high quality, easy to carry and durable with long-lasting, sharp blades. The Electrician’s Pocket Knife is three tools in one, saving multiple trips to the tool bag.

Features:

Full sized, fine edge drop point blade made of 440A stainless steel
Three wire stripping notches on the back of the blade (sizes: 10 SLD/12 STR, 12 SLD/14 STR and 14 SLD/ 16 STR)
No. 2 Phillips driver, the most versatile size
Liner locking blade secures the blade when open
Screwdriver is liner locking and folds smartly into the handle
Rugged aluminum handle
Pocket clip for easy storage

Klein Tools 32581 4-in-1 Electronics Screwdriver

Klein Tools 32581 4-in-1 Electronics Screwdriver

Featuring 4 Different Bits in One Miniature Tool!

Four different bits in one tool!

Includes #0 and #00 Phillips plus 1/8”and 3/32” Slotted tips

Rotating cap for optimum and precise control

Cushion-Grip handles for maximum comfort when working on small equipment

Heat-treated precision ground tip for greater strength

The new 4-in-1 Electronics Screwdriver features four different bits in one tool. Designed for precision work, this multi-purpose tool features a rotating cap for optimum control when working on small equipment.

Made of the highest quality tempered steel, carefully heat-treated for maximum strength and precision machined to fit screw openings securely. Cushion-Grip handles offer outstanding comfort.

Includes #0 and #00 Phillips plus 1/16”and 3/32” Slotted

Jonard Tools TK-400 Splicer’s Kit

Jonard Tools TK-400 Splicer’s Kit

This compact kit contains a special purpose ergonomic cable splicer’s knife, scissor and leather pouch. The knife features a short 1 3/4″ tough, cutlery-steel blade and a non-slip handle. The scissors are made of chrome vanadium steel with scraper and file on one sides plus 2 stripping notches. Both items fit securely in the leather pouch which can be mounted on belts up to 2″ wide.

Skinning Notch

18-20 AWG, 22-24 AWG

Handle Type

Chrome Vanadium Steel Loop, Thermal Plastic Rubber

Jonard Tools TK-375 Fiber Stripper & Scissor Kit

Jonard Tools TK-375 Fiber Stripper & Scissor Kit

Three Piece Fiber Optic Kit includes the JIC-375 Fiber Optic Stripper, ES-1964 Electrician’s Scissor, and convenient molded plastic pouch (with metal clip).

Jonard Tools FOD-2000 Fiber Optic Drop Cable Slitter

Jonard Tools FOD-2000 Fiber Optic Drop Cable Slitter

The FOD-2000 Fiber Optic Drop Cable Slitter is a patented tool that simplifies the slitting of drop cable jackets at the end of the cable or mid-span and was developed specifically for FTTH technicians working with flat fiber drop cables. For flat cables, where the width is .305″-.350″ and the height is .155″-.185″. These are the dimensions of a typical Corning SST-Drop flat cable with a jacket thickness of 0.03-0.04 inches. The tool will work on other cables with similar dimensions.

The FOD-2000 puts a slit on both sides of the jacket allowing easy access to the fiber or strength member. The ease of use makes this tool truly unique! To use just position the tool around the cable, pull and slit. A simple twist of the cable allows the jacket and strength members to separate from the buffer tube leaving the fiber undamaged.

Designed for .250″ flat drop cables. The FOD-2000 comes completely assembled with two blades, which can be reversed once the blades are worn. Replacement blades are also available under part number FOD-RB25 for a package of 25 blades.