Platinum Tools 15028C ProStrip 25R Cable Stripper

Platinum Tools 15028C ProStrip 25R Cable Stripper

The new Pro Strip 25R is a rugged 2 level coaxial cable stripper designed for the professional contractor. Quick change blade cartridges are factory pre-set for industry standard 1/4” cable preparation eliminating the need for tedious, time consuming blade depth adjustments. Stainless steel rollers provide smoother concentric, non-binding rotation on a wide range of cables for fast professional results. No adjustments required!

  • Industry standard 1/4’ strip length.
  • Pre-set quick change blade cartridges.
  • 2 stripping ports for broader range of cables.
  • Rugged high impact plastic housing.
  • Long life stainless steel blades.

APPLICATION

RG 6 and RG 59 cable stripping port.

  • RGB/Mini 59 cable stripping port for 23, 24 & 25 AWG center conductor cables.
  • 1/4″ (6 mm) strip length.


Platinum Tools 15024C SealSmart Coaxial Cable Stripper for Mini RG-59 Cable

Platinum Tools 15024C SealSmart Coaxial Cable Stripper for Mini RG-59 Cable

This SealSmart Coax Cable Stripper is factory preset for Mini RG59 cable. It works on 23 AWG solid center conductor cable.

  • 1/4″ braid, 2 level strip
  • Preset, no adjustment required
  • Prep coax for SealSmart 23 AWG center conductor F, RCA & BNC compression connectors with the navy-blue color code.

 



Platinum Tools 15021C SealSmart RG-6 Quad Coax Stripper (SealSmart Color-code Blue)

Platinum Tools 15021C SealSmart RG-6 Quad Coax Stripper (SealSmart Color-code Blue)

Fast, accurate stripping right out of the box. Each SealSmart™ Coax Stripper is pre-set at the factory for a specific coax cable size and strip length. We offer three color coded strippers to strip the most popular coax sizes/types used in home automation wiring & CATV cabling. The color codes coordinate with SealSmart™ Compression Connector color codes to reduce set up time and eliminate mistakes.

  • Color-coded for cable type, same as our SealSmart™ connectors (Blue for RG-6 Quad).
  • 2 level strip.
  • No adjustments required.


Platinum Tools 15020C Double-Ended Coax Stripper

Platinum Tools 15020C Double-Ended Coax Stripper

Quickly and easily strips a broad range of coax cables in a single step without any adjustments. The blades are designed to produce the standard 1/4″ braid, 2-level strip for compression connectors.

  • Works with RG-7/11/213/8 and RG-59/6/6 Quad cable types
  • Quickly and easily remove the cable jacket and inner conductors in a single step
  • Control the cutting depth by the number of rotations made around the cable
  • Preset, no adjustments required
  • Compact, lightweight and simple operation


Platinum Tools 15010C Cyclops 2 Cable Jacket Stripper

Platinum Tools 15010C Cyclops 2 Cable Jacket Stripper

The Cyclops® 2 takes the guesswork out of removing the cable jackets from many types of twisted pair, multicore and fiber optic cables. The tool self adjusts to automatically cut PVC, plenum and others without damaging the braids, foils or conductors. One piece design, ready to use right out of the package. Typical applications are in data, voice, video, audio, security and others.

  • Accepts cable diameters from 0.10″ to 0.43″ (2.5mm – 11mm)
  • Removes cable jackets from twisted pair UTP/STP cables.
  • Removes cable jackets from multi-core cable (shielded & un-shielded).
  • Removes cable jackets from fiber optic cable.
  • Self-adjusting.

APPLICATION

Stripping tool for removing cable jackets from twisted pair cable (UTP/STP), single & multi-core cables and fiber optic cable.

  • Accepts cable diameters to .43″ (11 mm) diameter.
  • Self adjusting.


Platinum Tools 15001C V-Notch Wire Stripper

Platinum Tools 15001C V-Notch Wire Stripper

Designed with a precision grounded V-notch blade for superior stripping results on various types of 24-10 AWG jacket insulation. High-carbon steel stripping blades adjust to proper wire gauge with rotating cam wheel.

  • Strip & cuts 24-10 AWG, solid or stranded wire.
  • Spring loaded with locking latch.
  • Looping holes for solid wire.
  • Vinyl-dipped cushioned handles.
  • Hardened to HRC45.
  • Rust resistant black oxide coating.

APPLICATION

  • Strip & cuts 10-24 AWG wire
  • For use on solid or stranded wire


Platinum Tools 12516C Tele-TitanXg 2.0 CAT6A/10Gig Crimp Tool

Platinum Tools 12516C Tele-TitanXg 2.0 CAT6A/10Gig Crimp Tool

The next generation in our 10Gig Termination System combines two crimpers into a single tool, making 2-step crimping simple. First, insert the 10Gig connector into the front end to terminate the contacts and switch to the back end to crimp the external ground. Like the original, the new Tele-TitanXg 2.0, along with our 10Gig shielded connectors, are engineered specifically for CAT6A cables to provide true 10Gig performance each and every time.

  • One tool does the job of two tools
  • Improve efficiencies by not having to change out tools in the middle of your termination
  • Straight action crimp achieved with minimal hand force
  • Compact and rugged design
  • Terminates to industry specified crimp heights
  • Gun-style lock for secure closure
  • Non-slip handle and finger grooves for comfortable grip and control
  • Not to be used with EZ-RJ45 or standard RJ45 modular plugs

APPLICATION

  • RJ45 CAT6A/10Gig Shielded RJ45 connectors
  • CAT6e, CAT6A, CAT7 & over-sized CAT5e/6 industrial Ethernet cables
  • Standard RJ12/11 connectors

 



Platinum Tools 12507C Tele-Titan Modular Plug Crimp Tool

Platinum Tools 12507C Tele-Titan Modular Plug Crimp Tool

The genius in the patented design of the Tele-Titan is that it works like a coax compression tool and delivers straight action termination. This parallel crimping force delivers even pressure on each of the plug’s pins ensuring precise termination. This mighty tool is compact, rugged and nests comfortably in your hand. Its superior fit and function consistently meet your performance requirements – just add scissors and you’re ready to tackle the modular plug crimp jobs for your next data and voice projects.

  • Compact, balanced and easy to use – fits hand well.
  • Uses true parallel or straight action, vertical crimp force.
  • Precisely seats, or terminates, all pins to industry specified crimp heights.
  • Stays securely closed for storage with.
  • Crimps with nominal hand force.
  • Embedded cable strippers for round & flat cables; built-in cable cutter.
  • Easily adjust and control depth of the blade when stripping Cat 5e/6 cables.
  • Built for repeated use & reliability required for professional installations.
  • Rugged – for professional use and reliability.
  • Lightweight and half the size of a standard crimp tool.

APPLICATION

For use with WE/SS standard style modular plug connectors; stranded & solid. RJ-45 Cat 3/4/5/5e/6 (8×8) (8P8C) RJ-12 6-position (6×6) (6P6C) RJ-11 4-position (6×4) (6P4C) RJ-11 2 position (6×2) (6P2C) NOTE: Not for use on AMP/TYCO style plugs



Platinum Tools 12360C External Ground Crimp Tool

Platinum Tools 12360C External Ground Crimp Tool

Perform 360° crimps on the external ground tab of shielded RJ45 connectors. Tool design allows the installer to perform a concentric termination with full control, preventing over/under crimping the external ground tab.

  • Non-ratcheted design
  • Dual cavity covers wide range of cable ODs
  • Spring loaded
  • Works on most external ground tabs
  • All steel frame
  • Black oxide finish

APPLICATION

Crimps the external ground tab on shielded RJ45 connectors for the following cable types:

Cat5e
Cat6
Cat6E
Cat6A
Cat7



Platinum Tools 10531C 5″ Side Cutting Pliers

Platinum Tools 10531C 5″ Side Cutting Pliers

The 5″ Side Cutting Pliers are perfectly suited for field or production line work. Use for cutting copper wire or trimming leads with the full flush cutting blades. The tool is manufactured from high carbon tool steel, precision ground and hardened for long life. Molded comfort grip handle. Rust resistance black oxide finish.

  • Cuts copper wire and soft metals up to 16 AWG (.05
  • 21° full flush cut.
  • Spring action.
  • Comfort grip vinyl handle.


Platinum Tools 10517C Scissor-Run Electrician’s Scissors – 5

Platinum Tools 10517C Scissor-Run Electrician’s Scissors – 5

An original favorite, this smooth cutting action, scissor-run design is excellent for cutting Kevlar®, foil and wire. Cuts solid wire up to 16 AWG and stranded up to 12 AWG. Strips 19 and 23 AWG.

  • Full serrated bottom blade for non-slip cutting
  • Scraper and file on backside of blades
  • Inside blade is chrome plated for rust protection
  • Easily re-sharpens & holds cutting edge
  • Stripping notches for 19 & 23 AWG wire
  • Screw permits easy adjustment

APPLICATION

  • Telcom
  • Datacom
  • Security
  • Electrical


Platinum Tools 10514C CCS-6 Cable Cutter

Platinum Tools 10514C CCS-6 Cable Cutter

Platinum Tools introduces the optimal cutting solution for today’s VDV (Voice,Data, Video) and security installers. Finally, a compact cable cutter designed to cut coax cable with steel center conductor! Easily cuts through copper and aluminum cable too.

  • Fully tested to 10,000 cuts on RG6 CCS, copper clad steel center conductor, with no degradation to the cutting blades
  • Provides outstanding cutting performance on all types of solid copper wire, twisted pair and coax cables
  • Optimal blade geometry ensures that the cable stays round during the cutting process so connectors are easy to affix to the cable
  • Comfortable PVC handle grips

APPLICATION

  • Coax CCS
  • Coax
  • CAT5E UTP/STP
  • CAT6 UTP/STP
  • CAT6A UTP/STP
  • Shipboard
  • Battery
  • Messenger
  • Antenna
  • DBS
  • Drop
  • Ground


Platinum Tools 10512C Steel Wire Cutter

Platinum Tools 10512C Steel Wire Cutter

Heavy duty, high leverage design provides singlehanded cutting action on a wide variety of hard to cut materials. Blade is designed to ensure a clean cut without pinching or crushing. Maintains concentricity to allow fittings and terminals to go on easily.

  • Contractor quality
  • Forged from chrome molybdenum & hardened to 58-60 HRC
  • Rust resistant electrophoretic deposition finish
  • Smooth spring action for easy, repetitive cutting
  • Handles contoured for comfortable hand grip

APPLICATION

Material / Cutting capacity

  • Stainless steel wire (3.0mm / 1/8″ / 0.118″)
  • Stainless steel wire rope (2.0mm / 5/64″ / 0.079″)
  • Piano wire (3.0mm / 1/8″ / 0.118″)
  • Iron wire (4.0mm / 5/32″ / 0.157″)
  • Threaded steel rod (4.0mm / 5/32″ / 0.157″) and Steel bolts (4.0mm / 5/32″ / 0.157″)


Tempo PA2113 Replacement Blade Set Stripax Pro 6

Tempo PA2113 Replacement Blade Set Stripax Pro 6

 



Platinum Tools 11008 8″ BNC Economy Removal Tool

11008

Platinum Tools 11008 8″ BNC Economy Removal Tool

Manufactured for the professional installer on a budget. Whether working on security, audio, or video installations, the BNC Economy Removal Tools will perform beyond your expectations without compromise.

  • Use to insert and remove BNC connectors in digital video patch bays and in hight-density DSX cross connect systems
  • Machined from tool steel and heat treated
  • Durable handle made from resin

 



True Utility MTL-0002 Dual Cutter 2-in-1 Cutting Tool

True Utility MTL-0002 Dual Cutter 2-in-1 Cutting Tool

The Dual Cutter is a sleek, 2-in-1 cutting tool that houses a 2.625” fine edge Tanto blade and a pair of spring-loaded, 1.5” micro-serrated scissors. The triangular shape of the Tanto blade provides increased tip strength for piercing tasks and creates two distinct sharpened edges for added functionality. The micro-serrations of the scissors allow for extra grip, which means a stronger edge and steadier, more precise cuts.

  • Height: 0.75″
  • Width: 1.125″
  • Length: 4″ (6.265″ with blade extended)
  • Weight: 0.45 lbs.


Klein Tools 3005CR Ratcheting Crimper, 10-22 AWG – Insulated Terminals

3005CR

Klein Tools 3005CR Ratcheting Crimper, 10-22 AWG – Insulated Terminals

The full-cycle Ratcheting Crimper crimps 10-22 AWG insulated wire terminals. This tool features three crimping cavities in one tool with color-coded wire markings for three size ranges of insulated terminals. Crimper design provides low effort to crimp while maintaining a high terminal pull-off force. Built-in ratchet ensures full-cycle crimping for a uniform crimp every time. Compound lever-action of narrow-span handles puts more crimping power into each squeeze. Comfort grips help reduce hand fatigue.

  • Crimps insulated terminals onto 10-22 AWG stranded copper wire
  • Adjustable compound action design puts more crimping power into each squeeze
  • Three crimping cavities in one tool: 22–16 AWG (Red), 16–14 AWG (Blue) and 12–10 AWG (Yellow) terminals
  • Built-in ratchet ensures full-cycle crimping for a uniform crimp every time
  • Unique cavity design provides consistent crimp from either side of the tool
  • Dial adjusts the amount of force applied to the crimp
  • Dual-material molded grips provide added comfort

 



Klein Tools D203-6C Pliers, Needle Nose Side-Cutters with Spring, 6-Inch

D203-6C

Klein Tools D203-6C Pliers, Needle Nose Side-Cutters with Spring, 6-Inch

These Long-Nose Side-Cutters are spring-loaded for self-opening. The cutting knives are induction hardened for maximum life. Made of forged steel for durability with a long nose for grabbing and looping wire.

  • Induction-hardened cutting knives for long life
  • Knurled jaws for sure wrapping and looping
  • Spring-loaded action for self-opening
  • Slim head design for working in confined areas
  • Hot-riveted joint ensures smooth action and no handle wobble
  • Curved handles provide greater tool control
  • Plastic-dipped handles for comfort and ease of identification
  • Custom, US-made tool steel
MADE-USA-EN Product Icon