Platinum Tools TVFL100 Fiber Optic Visual Fault Locator

Platinum Tools TVFL100 Fiber Optic Visual Fault Locator

Works with virtually all common fiber optic sizes and connector types, allowing you to test cables prior to install and test patch & breakout cables for faults. Powerful 10mW laser makes faults easy to see. Convenient flip-cap protects the laser tip, and with included adaptor works with most common sizes and types of fiber connectors.

  • Bright 10mW laser for continuity testing, also shows breaks and performance-reducing bends in most types of fiber optic cable
  • Aluminum construction for lightweight and durability
  • Simple slide switch to select either a flashing or solid beam
  • Hinged flip cap protects the lens when not in use
  • Works with both 1.25 & 2.5mm ferrules
  • Runs for more than 20 hours on 2 AA batteries (included).


Jonard Tools TK-400 Splicer’s Kit

Jonard Tools TK-400 Splicer’s Kit

This compact kit contains a special purpose ergonomic cable splicer’s knife, scissor and leather pouch. The knife features a short 1 3/4″ tough, cutlery-steel blade and a non-slip handle. The scissors are made of chrome vanadium steel with scraper and file on one sides plus 2 stripping notches. Both items fit securely in the leather pouch which can be mounted on belts up to 2″ wide.

Skinning Notch 18-20 AWG, 22-24 AWG
Handle Type Chrome Vanadium Steel Loop, Thermal Plastic Rubber


Jonard Tools TK-375 Fiber Stripper & Scissor Kit

Jonard Tools TK-375 Fiber Stripper & Scissor Kit

Three Piece Fiber Optic Kit includes the JIC-375 Fiber Optic Stripper, ES-1964 Electrician’s Scissor, and convenient molded plastic pouch (with metal clip).

 



Jonard Tools FOD-2000 Fiber Optic Drop Cable Slitter

Jonard Tools FOD-2000 Fiber Optic Drop Cable Slitter

The FOD-2000 Fiber Optic Drop Cable Slitter is a patented tool that simplifies the slitting of drop cable jackets at the end of the cable or mid-span and was developed specifically for FTTH technicians working with flat fiber drop cables. For flat cables, where the width is .305″-.350″ and the height is .155″-.185″. These are the dimensions of a typical Corning SST-Drop flat cable with a jacket thickness of 0.03-0.04 inches. The tool will work on other cables with similar dimensions.

The FOD-2000 puts a slit on both sides of the jacket allowing easy access to the fiber or strength member. The ease of use makes this tool truly unique! To use just position the tool around the cable, pull and slit. A simple twist of the cable allows the jacket and strength members to separate from the buffer tube leaving the fiber undamaged.

Designed for .250″ flat drop cables. The FOD-2000 comes completely assembled with two blades, which can be reversed once the blades are worn. Replacement blades are also available under part number FOD-RB25 for a package of 25 blades.



Jonard Tools CSR-1575 Cable Strip & Ring Tool

Jonard Tools CSR-1575 Cable Strip & Ring Tool

The CSR-1575 is designed to slit and ring cables, buffer tubes and jackets on fiber optic cables up to 7.5mm (0.3″) in diameter. The tool features an easily adjustable slit blade and ring blade as well as a removable and reversible V block that improves slitting performance and accommodates smaller to larger diameter cables.

Simple to use:

  • Ringing a cable: Ring blade is easily adjustable using the adjustment knob. Rotate the knob toward the ” ” sign to increase cutting blade depth and rotate the knob toward the “-” sign to decrease cutting depth. Once depth is determined, open jaw, insert cable, rotate tool around cable 3 times, open jaw and remove cable, pull off jacket.
  • Slitting a cable: First select which V groove is needed on the V block, we recommend using the small V groove for cables 3mm or smaller and use the large V groove for cable larger than 3mm. To remove V block simply push on the V block, remove from tool.
  • Select groove then push V block back into tool. Set the depth of the slitting blade by loosening the screw holding the blade in place, use the tab on the blade to move the blade up or down to the desired slitting depth, tighten screw. Open jaw, insert cable to be slit, close jaw and pull.


Jonard Tools MS-6 Mid Span Slitter

Jonard Tools MS-6 Mid Span Slitter

Designed to provide easy access to optical fibers in loose buffer tubes 1.2mm – 3.3 mm diameter. With 6 precision grooves buffer tube slitting is done without damage to the fiber. The blades are replaceable.

For loose tube jacket.

Groove Sizes:

  • 1.2 – 1.5 mm
  • 1.5 – 1.8 mm
  • 1.8 – 2.1 mm
  • 2.1 – 2.5 mm
  • 2.5 – 2.9 mm
  • 2.9 – 3.3 mm
 

Easy to use:

  1. Select the correct groove. Each groove is marked with the recommended fiber size
  2. Place the fiber in the groove to be used. The arrow on the top of the MS-6 indicates blade location and pulling direction.
  3. Close the tool making sure lock is engaged and pull


Jonard Tools TK-350 Fiber Optic Tool Kit with Kevlar Cutter

Jonard Tools TK-350 Fiber Optic Tool Kit with Kevlar Cutter

Kit includes:

JIC-375 Three Hole Fiber Optic Stripper

The first hole of this Fiber Optic Stripper strips the 1.6-3 mm fiber jacket down to the 600-900 micron buffer coating. The second hole strips the 600-900 micron buffer coating down to the 250 micron coating and the third hole is used to strip the 250 micron cable down to the 125 micron glass fiber without nicks or scratches.

JIC-186 Wire & Kevlar Cutting Shears

High carbon stainless steel blades (heat treated to HRC 58-60) designed to cut Kevlar®, cabling insulation, tape, cable ties and other material. Ergonomic handles for user comfort and durability. Adjustable joint screw under protective cap, serrated blade grip material, sharp and durable 6″ long.

H-60 Molded Two Tool Pouch

Made of durable PVC material with metal clip.

 



Jonard Tools TK-160 Fiber Prep Kit with Connector Cleaners & Visual Fault Locator

Jonard Tools TK-160 Fiber Prep Kit with Connector Cleaners & Visual Fault Locator

Jonard Tools’ TK-160 fiber preparation kit, with Connector Cleaners (FCC-126, FCC-250) & Visual Fault Locator (VFL-150) provides you with all of the tools needed to access and prepare a fiber optic cable for termination.

The TK-160 Fiber Prep Kit includes:

  • CST-1900 Round Cable Stripper
  • CSR-1575 Cable Strip & Ring Tool
  • FOD-2000 Fiber Optic Drop Cable Slitter
  • MS-6 Mid Span Slitter for opening various types of fiber optic cables
  • JIC-375 3-hole fiber stripper
  • JIC-186 Kevlar cutter for prepping the fiber for termination
  • SD-61 multi bit screwdriver
  • FL-2000 LED flashlight
  • JIC-2288 diagonal cutter
  • JIC-842 long nose pliers
  • FW-5 fiber wipes
  • FCC-125 Fiber Connector Cleaner 1.25mm
  • FCC-250 Fiber Connector Cleaner 2.5mm
  • VFL-150 Visual Fault Locator Kit

All of these tools are provided in a rugged tool case with extra pockets for additional tools, connectors and many other items.



Jonard Tools FCC-125 Fiber Connector Cleaner 1.25mm

Jonard Tools FCC-125 Fiber Connector Cleaner 1.25mm

The Jonard Tools FCC-125 quick click ferrule end face cleaner is designed to provide exceptional  cleaning performance by cleaning LC connectors beyond the critical fiber core area and cleaning deep into the contact area of a bulkhead adapter or connectors on fiber optic cables. The tethered dust cap provides protection for the micro fiber cleaning fabric and is an adapter for connector end face cleaning.

The FCC-125 features a patented 360 degree Rotational Tip for extra wide cleaning, easy one push operation and extendable nozzle, providing an additional 1.5 inches for a nozzle length of 4 inches to aid in accessing deep ports or crowded access panels. Additionally the FCC-125 uses a non-woven micro fiber that is lint free. The FCC-125 provides 800 cleanings and the outer body is made from static dissipative material for safe ESD work.

Jonard Tools patented cleaning technology features:
  • Slide-Guide™ non-slip micro tape feeder guarantees high reliability
  • Dual Rotational tip provides superior ferrule End face cleaning


Eclipse 200-047 Nick-Free Fiber Optic Stripper

Eclipse 200-047 Nick-Free Fiber Optic Stripper

TheEclipse 200-047 blades ensure that these strippers cut nick free. The Screw make it possible to adjust the depth of your cut and the spring loaded handles lessen the strain on the hand.

Nick-free Fiber Optic Stripper

  • Nick-Free
  • Screw for fine adjustments
  • Spring loaded handles
  • Strips 900 um buffer
  • Strips 2-3 mm jacket
  • Strips 125 um Acrylate