Fluke AC285 SureGrip Alligator Clips

Fluke AC285 SureGrip Alligator Clips are designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.

One pair (red, black) of large alligator clips with nickel-plated steel jaws
Multi-purpose tooth pattern grips anything from fine gauge wire to a 20 mm bolt
Recommended for use with TL222 and TL224 test leads
CAT IV 600 V; CAT III 1000 V, 10 A rating. UL listed
One year warranty

Fluke AC220, AC280, AC283 CE Declaration of Conformity

Fluke AC283A SureGrip Pincer Clips

Fluke AC283A SureGrip Pincer Clips

Fluke AC283A SureGrip Pincer Clips designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.

One pair (red, black) of nickel plated pincers open to 5 mm
11.4 cm flexible insulated shaft
Recommended for use with TL222 and TL224 test leads
CAT IV 600 V, CAT III 1000 V, 1 A rating. UL listed
One year warranty

Fluke AC220, AC280, AC283 CE Declaration of Conformity

Fluke AC280 Hook Clips

Fluke AC280 Hook Clips SureGrip™ accessories are designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.

One pair (red, black) of nickel plated clips
Profile narrows to 5.6mm at tip, hook opening 6.4mm at front, 2mm at base
Recommended for use with TL222 and TL224 test leads
CAT IV 600 V, CAT III 1000 V, 3 A rating. UL listed
One year warranty

Fluke AC280 Declaration of Conformity

Fluke AC220 Alligator Clips

Fluke AC220 Alligator Clips are designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.

One pair (red, black) of small, insulated, nickel plated jaws
Blunt tip grabs round screw heads up to 9.5 mm
Recommended for use with TL222 and TL224 test leads
CAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed
One year warranty

Fluke AC220 Declaration of Conformity

Fluke 80TK Thermocouple Module

FREE UPS GROUND SHIPPING

Converts a DMM to a thermometer
For use with type-K thermocouples in low voltage applications(below 24 V AC, 60 V DC)
Measurement range:-50 to 1000°C (probe dependent)
One year warranty

80TK Instruction Sheet

Fluke 80PK-22 SureGrip Immersion Temperature Probe

This Fluke 80PK-22 SureGrip Immersion Temperature Probe is an immersion temperature probe is designed for use in liquid and gels. It can be used as a general purpose temperature probe.

The Fluke 80PK-22 SureGrip Immersion Temperature Probe is designed for use in liquid and gels. It can also be used as a general purpose temperature probe. The thermocouple junction is protected from tip to handle by an Inconel sheath. The 80PK-22 can be used with any temperature-measuring instrument that is designed to accept type K thermocouples and has a miniature connector input.

Type-K thermocouple for use in liquids and gels
Measurement range:-40 to 1090°C
One year warranty

80PK-22 Instruction Sheet

Fluke 80K-6 High Voltage Probe

FREE UPS GROUND SHIPPING

The 80K-6 is a high voltage probe designed to extend the voltage measuring capability of an AC/DC voltmeter to 6000 volts peak AC or DC Overvoltage Category I. This means the probe can only be used to make measurements on energy limited circuits within equipment. Examples include high voltage within televisions or photo copy machines. DO NOT use this probe to measure high voltages on power distribution systems. The probe provides high accuracy when used with a voltmeter having 10 Megohm input impedance.

A high voltage probe that allows a multimeter to measure up to 6,000V or 40,000V respectively. Intended for low energy applications only
One year warranty

80K-15 Instruction Sheet

Fluke 80K-40 High Voltage Probe

FREE UPS GROUND SHIPPING

The Fluke 80K-40 High Voltage Probe is designed to extend the voltage measuring capability of an AC/DC voltmeter to 40,000 volts peak AC or DC Overvoltage Category I. This means the probe can only be used to make measurements on energy limited circuits within equipment. Examples include high voltage within televisions or photo copy machines. DO NOT use this probe to measure high voltages on power distribution systems. The probe provides high accuracy when used with a voltmeter having 10 Megohm input impedance.

A high voltage probe that allows a multimeter to measure up to 6,000V or 40,000V respectively. Intended for low energy applications only
One year warranty

80K-15 Instruction Sheet