Fluke 566 Infrared and Contact Thermometer

Fluke 566 Infrared and Contact Thermometer

Fluke 566 Infrared and Contact Thermometer

FREE UPS GROUND SHIPPING

The Fluke 566 two-in-one contact and non contact thermometer can stand up to tough industrial, electrical, and mechanical environments.

  • Laser guided sighting system for easy targeting with 1 % accuracy
  • 12-point data logging
  • Advanced optics to measure smaller targets at greater distances
  • Adjustable emissivity for more accurate temperature measurements
  • Selectable MAX, MIN, DIF and AVG functions that display values instantly with Hi/Lo Alarm
  • Expanded measurement range up to 600 ºC (1100 ºF)
  • Optional probe accessory available for dual contact and non-contact temperature measurements



Fluke TPAK ToolPak Magnetic Meter Hanger

Fluke TPAK ToolPak Magnetic Meter Hanger

Fluke TPAK ToolPak Magnetic Meter Hanger

The Fluke TPAK ToolPak Magnetic Meter Hanger allows you to hang your meter on nails, hooks and many other objects so you can take your measurements hands-free. The kit includes powerful magnetic hanger, 9 inch hook and loop strap, a hook hanger and a general purpose hanger. Solves any hanging and positioning problem you may face. Attaches to most Fluke meters

The meter hanging solution:

  • Solves almost any hanging and positioning problem you may face
  • The universal hanger allows you to hang your meter on nails, hooks and many other objects
  • Compatible with many Fluke instruments
  • One year warranty
  • Kit includes, universal hanger clips (2), hook & loop straps (2 lengths) and strong magnet
  • Combine components to meet most hanging needs
  • Attaches to back of a 110/170/180 Series meter, 20/70 -III with integrated holster (with adapter), 724/725 and 50 Series II
  • One year warranty

 



Fluke TL910 Electronic Test Probes

Fluke TL910 Electronic Test Probes

Fluke TL910 Electronic Test Probes

  • Very small 1 mm tips to access hard to reach test points
  • Probe tip length up to 100 mm, test lead length: 1 m
  • Included : 3 sets of spring loaded gold tips and 2 sets of stainless steel tips
  • CAT IV 600 V, CAT III 1000 V, 3 A rating
  • One year warranty
Compatible Products (14)
Model Name Description
Fluke 123 Fluke 123 Industrial ScopeMeter® Hand Held Oscilloscope
Fluke 123/S Fluke 123/S Industrial ScopeMeter® Hand Held Oscilloscope
Fluke 124 Fluke 124 Industrial ScopeMeter® Hand Held Oscilloscope
Fluke 124/S Fluke 124/S Industrial ScopeMeter® Hand Held Oscilloscopes with SCC120 kit
Fluke 287 Fluke 287 True-RMS Electronics Logging Multimeter
Fluke 289 Fluke 289 True-RMS Industrial Logging Multimeter
Fluke 707 Fluke 707 Loop Calibrator with Quick Click Knob
Fluke 707Ex Fluke 707Ex Intrinsically Safe Loop Calibrator
Fluke 715 Fluke 715 Volt/mA Calibrator
Fluke 789 Fluke 789 ProcessMeter™
Fluke 83V Fluke 83V Average Responding Industrial Multimeter
Fluke 87V Fluke 87V Industrial Multimeter


Fluke TL81A Deluxe Electronic Test Lead Kit

Fluke TL81A Deluxe Electronic Test Lead Kit

Fluke TL81A Deluxe Electronic Test Lead Kit

FREE UPS GROUND SHIPPING

The Fluke TL81A Deluxe Electronic Test lead kit is ideal for testing electronic equipment. It offers test versatility with modular test probes, alligator clips, test clips and other accessories included and can attach directly to the SureGrip™ test leads. The kit consists of a quad fold nylon pouch containing 11 items.

  • One meter long test lead with a safety shrouded, right angle banana connector on one end and a stainless steel test probe on the other end, rated up to 10A. Silicone-insulated leads have superior flexibility in cold temperatures and resistance to high temperatures
  • Insulated alligator clip rated up to 5A
  • Insulated probe tip extender rated up to 3A
  • Modular test probe with banana connector in the handle, rated up to 10A
  • Modular hook-style clip test lead with banana connector, rated up to 5A
  • Modular pinch-style clip test lead with banana connector, rated up to 5A
  • Modular alligator clip with banana connector, rated up to 5A
  • Slide-on IC probe tip adapter (rated up to 3A) and test lead couplers
  • Bare spade lug with banana connector, rated up to 10A
  • CAT III 300V
  • Compatible with Fluke and other multimeters that accept safety shrouded, standard diameter banana connectors
  • UL approved
  • One year warranty

.



Fluke TL80A Basic Electronic Test Lead Kit

Fluke TL80A Basic Electronic Test Lead Kit

Fluke TL80A Basic Electronic Test Lead Kit

The Fluke TL80A Basic Electronic Test Lead Kit is a basic electronic test lead kit that has the fundamental accessories for testing electronics. Includes the Fluke TL80A Basic Electronic Test Lead Kit premium test lead set.

  • One pair (red, black) each 1 meter long silicone test lead set, alligator clip and probe tip extender.
  • C75 soft carrying case
  • CAT II 300 V. UL listed
  • One year warranty  


Fluke TL75 Hard Point Test Lead Set

Fluke TL75 Hard Point Test Lead Set

Fluke TL75 Hard Point Test Lead Set

Test leads are an integral part of the complete measurement system and extend the capabilities of your digital multimeter.  The Fluke TL75 Hard Point Test Lead Set offers the convenience of a test lead and probe-in-one unit with a variety of connections. One pair (red, black) comfort grip probe with PVC insulated right angel shrouded 4 mm (0.16) banana plugs.

  • One pair (red, black) comfort grip probes with PVC insulated, test leads with right-angle shrouded banana plugs
  • Recommended for general purpose measurements
  • CAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed
  • One year warranty

 



Fluke TL71 Premium Test Lead Set

Fluke TL71 Premium Test Lead Set

Fluke TL71 Premium Test Lead Set

Test leads are an integral part of the complete measurement system and extend the capabilities of your digital multimeter. The Fluke TL71 Premium Test Lead Set has one pair of red and black comfort grip probes with flexible silicone-insulated, right-angle test leads. With distinctive comfort grip probes, they are heat and cold resistant with safety ratings up to CAT III 1000 V.

  • One pair (red, black) comfort grip probes with silicone insulated, right-angle test leads
  • Recommended for µV measurements
  • CAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed
  • One year warranty

 



Fluke TL40 Retractable Tip Test Lead Set

Fluke TL40 Retractable Tip Test Lead Set

Fluke TL40 Retractable Tip Test Lead Set

Test leads are an integral part of the complete measurement system and extend the capabilities of your meter. The Fluke TL40 Retractable Tip Test Lead Set The Fluke TL40 Retractable Tip Test Lead Set has one pair (red, black) of test leads with sharp needle point tips adjustable to desired length.

  • One pair (red, black) of test leads with sharp needle point tips adjustable to desired length from 0 to 76 mm
  • Extra hard probe tips to provide long service life
  • Flexible silicone insulated test leads
  • CAT III 300 V, 3 A rating, UL listed
  • One year warranty

 



Fluke TL28A Automotive Test Lead Set

Fluke TL28A Automotive Test Lead Set

Fluke TL28A Automotive Test Lead Set

The Fluke TL28A Automotive Test Lead Set has large jaws, long leads and a piercing needle inside the jaws.

Solid, spring-loaded copper clips with a wide 12.7 mm (.50″) jaw opening and serrated teeth. Large piercing needle for penetrating larger gauge wires located inside the jaws. 1.5 m (60″), silicone-insulated leads, useable from -80 °C to 70 °C (-112 °F to 158 °F). Rated for 30 V, 10 A.

One red, one black.

  • Flexible silicone insulated leads are heat and cold resistant
  • Cat I 30 V, 10 A

 

 



Fluke TL26A 5-Way Test Lead Set

Fluke TL26A 5-Way Test Lead Set

Fluke TL26A 5-Way Test Lead Set

The Fluke TL26A 5-Way Test Lead Set has 5 ways to connect:

  1. U-shaped nose for blade-shaped terminals;
  2. Notched jaw for gripping screw heads, bare wire or terminals;
  3. Serrated teeth for gripping threaded or wire-wrapped terminals;
  4. Cluster of sharp needles for piercing small gauge (#22-#28 AWG) wires;
  5. Large piercing needle for penetrating larger gauge wires.

60″ (1.5m), silicone-insulated leads, useable from -80°C to 150°C (-112°F to 302°F). Rated for 30V, 10A. One red, one black.

 



Fluke TL238 SureGrip Test Lead Set for High Energy Environments

Fluke TL238 SureGrip Test Lead Set for High Energy Environments

Fluke TL238 SureGrip Test Lead Set for High Energy Environments

The Fluke TL238 SureGrip Test Lead Set for High Energy Environments provide the convenience and variety for test lead configurations by attaching clips, hooks and grabbers as needed in High Energy Environments.

An accessory kit especially designed for working in high energy environments. The SureGrip™ Test Probe has only 4 mm of exposed metal at the tip. Test probes with less exposed metal help reduce the risk of inadvertant shorts between each other and other metal surfaces that could result in an arc flash explosion. Probe extenders fit between modular test leads and test probes, increasing the distance between you and a live circuit by 20.5 cm.

The kit includes:

  • TP238 SureGrip™ Insulated Test Probe Set
  • TP280 SureGrip™ Test Probe Extender
  • TL224 SureGrip™ Silicone Right Angle/Straight Test Lead Set

TP238 and TL224 conform to safety standard IEC 1010-2-031, maximum 1000V CAT III, 600V CAT IV, Pollution Degree 2, 10A

Probe extenders conform to safety standard IEC 1010-2-031, maximum 1000V CAT III, Pollution Degree 2, 10A

 

 

 

 



Fluke TL224 SureGrip Insulated Test Leads

Fluke TL224 SureGrip Insulated Test Leads

Fluke TL224 SureGrip Insulated Test Leads

These insulated Fluke TL224 SureGrip Insulated Test Leads provide convenience and variety for test lead configurations by attaching clips, hooks and grabbers as needed.

SureGrip™ accessories are designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.

Test leads are an integral part of the complete measurement system and extend the capabilities of your digital multimeter. The TL224 SureGrip™ Insulated Test leads offer reinforced strain relief and includes banana jack termination for a variety of test lead configurations. SureGrip™ accessories are designed to improve steadiness in slippery hands. Rubber over molded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.

  • DMM test leads (red, black) with safety shrouded, standard diameter banana plugs
  • Right angle connector on one end and straight connector on the other
  • Reinforced strain relief
  • 1.5 meter silicone-insulated wire resists heat & cold
  • CAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed
  • One year warranty

 

 

 

 



Fluke TL223 SureGrip Electrical Test Lead Set

Fluke TL223 SureGrip Electrical Test Lead Set

Fluke TL223 SureGrip Electrical Test Lead Set

Test leads are an integral part of the complete measurement system and extend the capabilities of your meter. The Fluke TL223 SureGrip Electrical Test Lead Set is an ideal starter kit for electrical applications. This all in one set includes three test lead accessories with the SureGrip™ design, designed for your comfort so you can focus on taking accurate measurements.

Handy all-in-one kit that includes:

  • AC220 SureGrip™ Alligator Clip Set
  • TP1 Slim-Reach™ Test Probes (flat bladed)
  • TL224 SureGrip™ Silicone Test Lead Set (straight to right)
  • One year warranty

 

 



Fluke TL222 SureGrip Silicone Insulated Test Leads

Fluke TL222 SureGrip Silicone Insulated Test Leads

Fluke TL222 SureGrip Silicone Insulated Test Leads:

SureGrip™ accessories are designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.

  • DMM test leads (red, black) with safety shrouded, standard diameter banana plugs
  • Right angle connector on both ends
  • Reinforced strain relief
  • 1.5 meter silicone-insulated wire resists heat & cold
  • CAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed
  • One year warranty

 



Fluke TL221 SureGrip Test Lead Extension Set

Fluke TL221 SureGrip Test Lead Extension Set

Fluke TL221 SureGrip Test Lead Extension Set

The Fluke TL221 SureGrip Test Lead Extension Set is designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.

  • One pair (red, black) of silicone insulated leads with straight connectors on both ends
  • Reinforced strain relief
  • Includes one pair (red, black) of female couplers
  • Extends test leads by 1.5 m
  • 600 V CAT IV, 1000 V CAT III, 10 A rating. UL listed
  • One year warranty

 



Fluke TL220 SureGrip Industrial Test Lead Set

Fluke TL220 SureGripTM Industrial Test Lead Set

Fluke TL220 SureGrip Industrial Test Lead Set

The Fluke TL220 SureGrip Industrial Test Lead Set is designed to provide a reliable grip in slippery hands, with interchangeable test lead set for multiple electrical applications. Compatible with all instruments and test probes that accept standard 4 mm shrouded banana connectors.

This test lead set with test probes works in multiple electrical applications. SureGrip™ feature is designed to do your work with comfort.

  • AC220 SureGrip™ Alligator Clip Set
  • TP220 SureGrip™ Test Probe Set
  • TL222 SureGrip™ Silicone Test Lead Set (right to right)
  • One year warranty

 

 

 

 



Fluke i410 AC/DC Current Clamp

Fluke i410 AC/DC Current Clamp

Fluke i410 AC/DC Current Clamp

FREE UPS GROUND SHIPPING

The Fluke i410 AC/DC Current Clamp expands the functionality of digital multimeters and measures up to 400 amps for both AC and DC current. The large clamp claw gives you access to difficult to reach areas. The kit includes a handy carrying case.

  • Battery-powered Hall-effect clamp-on probe measures AC/DC current from 1A to 400A
  • The i410 is a single range ac/dc current clamp with mV output
  • The i410 is compatible with most Fluke multimeters or any other current measurement device that accepts safety shrouded banana plugs
  • One year warranty

 i410 Instruction Sheet

 



Fluke i1010 AC/DC Current Clamp

Fluke i1010 AC/DC Current Clamp

Fluke i1010 AC/DC Current Clamp

FREE UPS GROUND SHIPPING

Fluke current clamps extend the current ranges of Fluke tools. The Fluke i1010 AC/DC Current Clamp is highly reliable, measures 1 A to 1000 A and provides accurate current reading without breaking the circuit. This clamp measures both ac and dc current with a large jaw, battery-powered Hall-effect probe that gives access to difficult to reach areas. Compatible with most Fluke multimeters.

  • Battery-powered Hall-effect clamp-on probe measures ac current to 600A, dc current to 1000A
  • The i1010 is a single range ac/dc current clamp with mV output
  • The i1010 is compatible with most Fluke multimeters or any other current measurement device that accepts safety shrouded banana plugs
  • One year warranty

i1010 Instruction Sheet