Fluke i400 AC Current Clamp

Fluke i400 AC Current Clamp

Fluke i400 AC Current Clamp

FREE SHIPPING

The i400 is a single range 400 A ac current clamp with current output via safety shrouded banana plugs. The clamp is compatible with most Fluke multimeters or any other current measurement device that accepts 4mm-shrouded banana plugs and has an AC milliamp range. The division ratio is 1000:1.

  • Companion to your DMM to measure up to 400A AC
  • 1mA/Amp output guarantees easy reading on you meter
  • Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating
  • Specially designed to offer maximum utility in a very compact shape
  • Take accurate current readings without breaking the circuit
  • Soft non-slippery overmold handle prevents from accidental touching live wiring

 



Fluke i3000s AC Current Clamp

Fluke i3000s AC Current Clamp

Fluke i3000s AC Current Clamp

FREE UPS GROUND SHIPPING

Very High AC Current Clamp

Fluke Current clamps are the ideal tools to extend the current ranges of Fluke tools.
The i3000s is a clamp-on AC Current Clamp for use with oscilloscopes and multimeters with banana input using the supplied Dual Banana to BNC Adapter. The clamp is optimized for measurement on power distribution systems.

The Fluke i3000s is a clamp-on AC Current Clamp for use with oscilloscopes and multimeters with banana input using the supplied Dual Banana to BNC Adapter. The clamp is optimized for measurement on power distribution systems.

  • Nominal current range: 30A, 300A, 3000A
  • Continuous current range: 1A – 30A, 1A – 300A, 1A – 3000A
  • Maximum Non-Destructive Current: 4000A
  • Useable frequency: 10 Hz – 100 kHz
  • CAT III, 600 V

 i3000s Instruction Sheet



Fluke i200s AC Current Clamp

Fluke i200s AC Current Clamp

Fluke i200s AC Current Clamp

FREE UPS GROUND SHIPPING

The Fluke i200s is a dual range 20A and 200A ac current clamp with voltage output via a safety insulated BNC connector. A dual banana to BNC adapter is supplied to allow the i200s to be connected to multimeters with banana inputs.
  • Companion to your scopemeter, power quality meter or digital multimeter to measure up to 200A AC
  • Included adapter for DMM’s
  • Two ranges: 20 A & 200A, 10 or 100 mV/ Amp output
  • Take accurate current readings without breaking the circuit
  • CAT III 600V safety rating

 



Fluke T+ Electrical Tester

Fluke T+ Electrical Tester

Fluke T  Electrical Tester

The Fluke T Electrical Tester has all the advantages of traditional solenoid testers, with none of the typical solenoid tester drawbacks. The T uses all 3 voltage detection methods – light, sound and vibration, to work more efficiently in noisy environments, dimly lit areas, or tight spaces. Built-in flashlight, GFCI trip capability, and the legendary ruggedness you expect from Fluke, make the T an excellent choice for most industrial, commercial, and residential applications.

    • CAT IV 600 V, CAT III 1000 V rated
    • AC/DC Voltage: 12 V – 600 V on LED bar
    • Continuity beeper
    • Detects live voltage even when the batteries are dead
    • GFCI Trip
    • Bright LED flashlight for work in poorly lit areas
    • On/Off switchable beeper, selectable according to your environment
    • Replaceable test probes for added flexibility and convenience
    • Hazardous voltage warning light for added user protection
    • Test lead strap included for better test lead management
    • Auto off mode to conserve battery life
    • 2-year warranty
 


Fluke 922 Airflow Meter/Micromanometer

Fluke 922 Airflow Meter/Micromanometer

Fluke 922 Airflow Meter/Micromanometer

FREE UPS GROUND SHIPPING

 

The Fluke 922 makes airflow measurements easy by combining three tools: differential pressure, airflow, and velocity into a single, rugged meter. Measure pressure drops across key HVAC equipment to drive peak performance and extend equipment life. Monitor indoor vs. outdoor pressure relationships and manage the building envelope. Perform duct traversals for accurate airflow readings.

    • Powerful meter provides differential and static pressure, air velocity and flow readings
    • Convenient colored hoses help proper interpretation of pressure readings
    • Easy to use without sacrificing performance
    • Bright, backlit display for clear viewing in all environments
    • User-defined duct shape and size for maximum airflow accuracy
    • Resolution down to 0.001 in H2O
    • 99 point data storage capacity
    • Min/Max/Average/Hold functions for easy data analysis
    • Auto power off saves battery life



Fluke 789 ProcessMeter

Fluke 789 ProcessMeter

Fluke 789 ProcessMeter

FREE UPS GROUND SHIPPING

 

Now compatible with Fluke Connect™ App

The Fluke 789 ProcessMeter is the ultimate troubleshooting tool for electricians and instrumentation professionals, combining the functionality of a loop calibrator with the power of a digital multimeter. By equipping the 789 with a temperature measurement module and the wireless data logging capabilities of Fluke Connect™ with ShareLive™ video call (sold separately), process technicians can now do a lot more while carrying a lot less. And with its built-in, selectable 250 ohm HART® resistor, it eliminates the need to carry a separate resistor with you.

    • 4 V Loop power supply
    • Very large dual display
    • Enhanced backlight with 2 brightness settings
    • 1200 Ohm drive capability on mA source
    • HART mode setting with loop power and a built-in 250 ohm resistor
    • 0% and 100 % buttons to toggle between 4 and 20 mA sourcing for a quick span check
    • Infrared-port to process data in FlukeView Forms (V2.1) software
    • Precision 1000 V, 440 mA True-RMS digital Multimeter
    • 0.1% dc voltage accuracy
    • 0.05% dc current accuracy
    • Frequency measurement to 20 kHz
    • Min/Max/Average/Hold/Relative modes
    • Diode Test and Continuity Beeper
    • Simultaneous mA and % of scale readout
    • 20 mA DC current source / loop calibrator / simulator
    • Manual Step (100%, 25%, Coarse, Fine) plus Auto Step and Auto Ramp
    • Externally accessible battery for easy battery changes



Fluke 771 Milliamp Process Clamp Meter

Fluke 771 Milliamp Process Clamp Meter

Fluke 771 Milliamp Process Clamp Meter

FREE UPS GROUND SHIPPING

 

 

Measure 4-20 mA signals without breaking the loop with this new, compact clamp meter for PLC and control systems analog I/O. The detachable clamp with extension cable allows you to take measurements in tight locations, and the built-in spot light illuminates hard to see wires in dark enclosures.

  • Measure mA signal for PLC and control system analog I/O
  • Count on best in class accuracy of 0.2%
  • Measure mA signals with 0.01mA resolution
  • Three year warranty for electronics, one year for clamp cable assembly



Fluke 289 True-RMS Industrial Logging Multimeter

Fluke 289 True-RMS Industrial Logging Multimeter

Fluke 289 True-RMS Industrial Logging Multimeter

FREE UPS GROUND SHIPPING

 Now compatible with Fluke Connect™ Mobile App 

The 289 is the next generation high performance industrial logging multimeter designed to solve complex problems in electronics, plant automation, power distribution, and electro-mechanical equipment. With the ability to log data and review it graphically on-screen, you can solve problems faster and help minimize downtime. Let the new 289 be your watchdog for systems or processes while you are off doing other jobs. Now communicate wirelessly with your iOS and Android smart devices with the Fluke Connect mobile app and ir3000 FC wireless connector (sold separately).

    • NEW – Now compatible with Fluke Connect mobile app and all Fluke FC enabled test tools with optional ir3000 FC infrared connector (sold separately).
    • NEW – Let your team see what you see in an instant with ShareLive™ video call (requires Fluke Connect mobile app and ir3000 FC wireless connector).
    • TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred.
    • Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
    • Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.
    • Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.
    • Large 50,000 count, 1/4 VGA dot matrix display with white backlight.
    • Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.
    • Save multiple logging sessions before PC download is necessary.
    • Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and comparing differences in motor winding resistance or contact resistance.
    • Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment.
    • LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power.
    • On board help screens for measurement functions. Unsure about a function – go to that function and press the “i” button.
    • Real time clock for automatic time stamping of saved readings.
    • Relative mode to remove test lead resistance from low ohms or capacitance measurements.
    • True-RMS AC voltage and current for accurate measurements on non-linear signals.
    • Measure up to 10 A (20 A for 30 seconds).
    • 100 mF capacitance range.
    • Peak capture to record transients as fast as 250 μs.
    • Premium test leads and alligator clips included.
    • Amp jack plugs included.
    • Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks.
    • Optional FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents.
    • Limited lifetime warranty.

   



Fluke 287 True-RMS Electronics Logging Multimeter

Fluke 287 True-RMS Electronics Logging Multimeter

Fluke 287 True-RMS Electronics Logging Multimeter

FREE UPS GROUND SHIPPING

 For electronics professionals who demand the best in performance, accuracy and capabilities, we introduce the Fluke 287 Electronic True-RMS logging multimeter with TrendCapture. Use it to quickly characterize and document design performance. TrendCapture allows the engineer to graphically view logged readings after the recording session right on the DMM display. Scroll buttons and soft keys offer easy navigation and custom displays.
  • Large 50,000 count, 1/4 VGA display with white backlight for fast, accurate viewing of measurements
  • Logging Function with TrendCapture plots measurements as single line to help detect anomalies over time, storing up to 10,000 readings
  • 0.025 % basic dc accuracy
  • 100 kHz AC bandwidth
  • Battery saving sleep mode allows data logging for over 200 hours uninterrupted
  • Event and trend recording Helpful for troubleshooting intermittent problems or profiling loads
  • Soft keys and scroll buttons for easy navigation control, access to secondary functions, and custom displays
  • Saved measurements allows the user to name and recall measurements made in the field
  • Dual rated CAT IV 600 V/CAT III 1000 V
  • Limited Lifetime Warranty



Fluke 125B 40MHz Scopemeter

Fluke 125 40MHz Scopemeter

Fluke 125B 40MHz Scopemeter

FREE UPS GROUND SHIPPING

The Fluke 125B 40MHz Scopemeter: All the power of the 120-Series plus Industrial Bus Health Test capabilities and advanced power measurements on top.

The compact Fluke 125B 40MHz Scopemeter is the rugged solution for industrial troubleshooting and installation applications. Based on the Fluke 120 series, the 125 has all the capabilities of the 124 ScopeMeter extended with the capability to measure and analyze the signal quality on the common industrial buses.

The Fluke 125 ScopeMeter combines a 40MHz dual input digital storage oscillo-scope, two true-RMS digital multimeters and a dual input TrendPlot recorder all in a compact, battery powered instrument. Leave all other test tools behind, the Fluke 125 ScopeMeter is the only tool you’ll need.

  • Dual-input 40 MHz digital oscilloscope
  • Two 5,000 counts true-RMS digital multimeters
  • A dual-input TrendPlot recorder
  • Shielded test leads for oscilloscope, resistance and continuity measurements
  • 10:1 Voltage Probe included for high frequency measurements
  • 600 V CAT III safety certified
  • Up to 7 hours battery operation
  • Optically-isolated interface for PC connection
  • 3 year warranty on main instrument, 1 year on accessories

SOFTWARE NOT INCLUDED

125 Getting Started

 


Fluke 117 True-RMS Multimeter

Fluke 117 True-RMS Multimeter

Fluke 117 True-RMS Multimeter

FREE UPS GROUND SHIPPING 

The compact Fluke 117 true RMS digital multimeter is optimized to help you keep commercial buildings, hospitals and schools running right.

The advanced features of the Fluke 117 help you get the job done, quickly and safely. Integrated non-contact voltage detection helps you identify energized circuits. The AutoV/LoZ function prevents false readings caused by ghost voltage. The Fluke 117 delivers true-rms ac voltage and current readings with 6000-count resolution. It provides Min/Max/Average readings and measures frequency and capacitance. The battery door is easy to access, so you and your Fluke 117 can stay on the job.

Fluke 117 multimeters are independently tested for safe use in CAT III 600V environments.

    • VoltAlert™ technology for non-contact voltage detection
    • AutoVolt automatic ac/dc voltage selection
    • Low input impedance: helps prevent false readings due to ghost voltage
    • Large white LED backlight to work in poorly lit areas
    • True-rms for accurate measurements on non-linear loads
    • Measures 10 A (20 A overload for 30-seconds)
    • Resistance, continuity, frequency and capacitance
    • Min/Max/Average with elapsed time to record signal fluctuations
    • Compact ergonomic design for one-handed operation
    • Compatible with optional magnetic hanger (ToolPak™) for hands free operation
    • CAT III 600 V safety rated
  • AutoVolt/LoZ
  • VoltAlert

Case: C90

 



Fluke 116 HVAC Multimeter

Fluke 116 HVAC Multimeter

FREE UPS GROUND SHIPPING

The Fluke 116 digital multimeter delivers the capabilities professionals demand to troubleshoot and repair HVAC (heating, ventilation and air conditioning) systems. It has everything you need in an HVAC meter, including temperature and microamp measurements to help you quickly troubleshoot problems with HVAC equipment and flame sensors.

The Fluke 116 comes with the Fluke 80BK-A integrated DMM temperature probe. The microamp function allows flame sensor measurement down to 0.1 microamps. The AutoV/LoZ function prevents false readings caused by ghost voltage. The Fluke 116 also has a large white LED backlight for work in poorly lit areas. It measures resistance, continuity, frequency, and capacitance and provides Min/Max/Average readings with elapsed time to record signal fluctuations.

Fluke 116 multimeters are independently tested for safe use in CAT III 600V environments.

  • Built-in thermometer for HVAC applications
  • Microamps to test flame sensors
  • Low input impedance: helps prevent false readings due to ghost voltage
  • Large white LED backlight to work in poorly lit areas
  • Resistance, continuity, frequency and capacitance
  • Min/Max/Average with elapsed time to record signal fluctuations
  • Compact ergonomic design for one-handed operation
  • Compatible with optional magnetic hanger (ToolPak™)
  • CAT III 600 V safety rated

 



Fluke 115 True-RMS Multimeter

Fluke 115 True-RMS Multimeter

Fluke 115 True-RMS Multimeter

FREE UPS GROUND SHIPPING

With its simple operation, compact design and ease of use, the Fluke 115 True RMS digital multimeter provides the perfect answer for general purpose electrical and electronic test requirements. The Fluke 115 displays True RMS voltage and current readings with 600 count resolution, continuity and capacitance, making it perfect for quick verifications and field service use.  Fluke 115 Digital Multimeters are independently tested for safe use in CAT III 600V Environments.

 

  • Large white LED backlight to work in poorly lit areas
  • Resistance and continuity
  • Frequency and capacitance
  • Maximum Voltage ac/dc 600V
  • 10A ac/dc current measurement (20 A overload for 30-seconds max)
  • Min/Max/Average to record signal fluctuations
  • CAT III 600 V safety rated

Safety conformance

All inputs are protected to CE, IEN61010-1 CAT III 600V. UL, CSA, TÜV listed and VDE.

 

Specifications
Maximum voltage between any terminal and earth ground 600 V
Surge protection 6 kV peak per IEC 61010-1 600 VCAT III, Pollution Degree 2
Display Digital: 6,000 counts, updates 4 per second
Bar graph 33 segments, updates 32 per second
Operating temperature -10 °C to 50 °C
Storage temperature -40 °C to 60 °C
Battery type 9 volt Alkaline, NEDA 1604A/ IEC 6LR61
Batterylife 400 hours typical, without backlight
Accuracy Specifications
DC millivolts Range/Resolution 600.0 mV / 0.1 mV
Accuracy ± ([% of reading] [counts]): 0.5% 2
DC volts Range/Resolution 6.000 V / 0.001 V
60.00 V / 0.01 V
600.00 V / 0.1 V
Accuracy ± ([% of reading] [counts]): 0.5% 2
AC millivolts1 True RMS Range/Resolution 600.0 mV / 0.1 mV
Accuracy 1.0 % 3 (dc, 45 Hz to 500 Hz)
2.0 % 3 (500 Hz to 1 kHz)
AC volts1 True RMS Range/Resolution 6.000 V / 0.001 V
60.00 V / 0.01 V
600.0 V / 0.1 V
Accuracy 1.0 % 3 (dc, 45 Hz to 500 Hz)
2.0 % 3 (500 Hz to 1 kHz)
Continuity Range/Resolution 600 Ω / 1 Ω
Accuracy Beeper on < 20 Ω, off > 250 Ω; detects opens or shorts of
500 μs or longer.
Ohms Range/Resolution 600.0 Ω / 0.1 Ω
6.000 kΩ / 0.001 kΩ
60.00 kΩ / 0.01 kΩ
600.0 kΩ / 0.1 kΩ
6.000 MΩ / 0.001 MΩ
Accuracy 0.9 % 1
Range/Resolution 40.00 MΩ / 0.01 MΩ
Accuracy 5 % 2
Diode test Range/Resolution 2.00 V / 0.001 V
Accuracy 0.9% 2
Capacitance Range/Resolution 1000 nF / 1 nF
10.00 μF / 0.01 μF
100.0 μF / 0.1 μF
9999 μF / 1 μF
100 μF to 1000 μF
Accuracy 1.9% 2
Range/Resolution > 1000 μF
Accuracy 5% 20%
Lo-Z capacitance Range 1 nF to 500 μF
Accuracy 10% 2 typical
AC amps True RMS
(45 Hz to 500Hz)		 Range/Resolution 6.000 A / 0.001 A
10.00 A / 0.01 A
Accuracy 1.5% 3
20 A overload for 30-seconds max
DC amps Range/Resolution 6.000 A / 0.001 A
10.00 A / 0.01 A
Accuracy 1.0% 3
20 A overload for 30-seconds max
Hz (V or A input)2 Range/Resolution 99.99 Hz / 0.01 Hz
999.9 Hz / 0.01 Hz
9.999 kHz / 0.001 kHz
50 kHz / 0.01 kHz
Accuracy 0.1% 2
Notes:
¹ All AC voltage ranges except Auto-V/LoZ are specified from 1 % to 100 % of range. Auto-V/LoZ is specified from 0.0 V.
² Frequency is AC coupled, 5Hz to 30 kHz for AC voltage.
• Temperature uncertainty (accuracy) does not include the error of the thermocouple probe.
• Frequency is AC coupled, 5 Hz to 50 kHz for AC voltage. Frequency is DC coupled, 45 Hz to 5 kHz for AC current.
• Temperature Range/Resolution: -40 °F to 752 °F / 0.2 °F.
Mechanical & General Specifications
Size 167 x 84 x 46 mm (6.57″ x 3.31″ x 1.82″)
Weight 550 g
Warranty 3 years


Extech 407730 Digital Sound Level Meter

Extech 407730 Digital Sound Level Meter

Extech 407730 Digital Sound Level Meter

Digital Sound Level Meter

  • ±2dB accuracy with 0.1dB resolution
  • A&C weighting
  • AC analog output
  • Record Max/Min values over time
  • Auto power off and Max Hold functions
  • Utilizes 0.5″(12.7mm) condenser microphone
  • Tripod mountable
  • 40 to 130dB measuring range
  • Fast/slow response time
  • Tripod mountable

Applications:

  • Monitoring workplace machinery
  • Installing audio and alarm systems
  • Product noise certification and reduction


Extech 407026 Heavy Duty Light Meter

Extech 407026 Heavy Duty Light Meter

Extech 407026 Heavy Duty Light Meter

FREE UPS GROUND SHIPPING!

Heavy Duty Light Meter with PC Interface

Enhance accuracy by selecting one of four lighting types plus PC interface

  • Microprocessor assures maximum accuracy plus special functions
  • Super large 1.4″ LCD display
  • % displays differential from reference point
  • ZERO Re-Calibration
  • Utilizes precision photo diode and color correction filter
  • Cosine and color corrected measurements
  • ±4% accuracy is enhanced by selecting lighting type
  • Record/Recall MIN, MAX, and AVG readings
  • Data Hold plus Auto shut off
  • Built-in RS232 serial interface, optional software


Extech 45118 Mini Thermo-Anemometer

Extech 45118 Mini Thermo-Anemometer

Extech 45118 Mini Thermo-Anemometer

FREE UPS GROUND SHIPPING!

Mini Thermo-Anemometer

Waterproof pocket size with Air Velocity, Temperature and Windchill

  • Display Air Velocity and Temperature or Windchill
  • Selectable averaging function of 5, 10, or 13 second intervals
  • Fold up protective housing extends to 9″ (229mm) for better reach
  • Tripod mount
  • Data Hold with Auto power off


Fluke 715 Volt/mA Calibrator

Fluke 715 Volt/mA Calibrator

Fluke 715 Volt/mA Calibrator:

FREE UPS GROUND SHIPPING

The Fluke 715 Volt/ mA Calibrator delivers outstanding performance, durability and reliability. the calibrator is compact, lightweight, and easy to carry.

  • Measure loop current (0-20 mA, 4-20 mA) signals with very high accuracy of 0.015% and 1 mA resolution
  • Measure voltage output process signals from PLCs, transmitters
  • Source or simulate 24 mA loop current
  • Source voltage to 100 mV or 10V
  • 24V loop supply with simultaneous current measurement
  • Enhanced voltage and current measure and source accuracy
  • Improved battery life
  • 250 ohm HART resistor with loop power
  • Holster features test lead storage
  • Compatible with toolpack magnetic hanging system
  • Step and linear ramp output function
  • Configurable zero and span settings



Fluke 62 MAX Infrared Thermometer

Fluke 62 MAX Infrared Thermometer

Fluke 62 MAX Infrared Thermometer

Small in size. Big on toughness.

Why IR Thermometers?

Temperature is often the first indication of potential problems in electrical and mechanical applications. But how can you easily determine if an electrical panel has a hot spot, a motor is overheating or an HVAC system is inefficient? The answer is with an infrared (IR) thermometer. With handheld, non-contact IR thermometers, you can instantly measure equipment temperatures in hard-to-reach or hazardous areas. And with early detection of abnormal temperatures comes early correction of problems.

Fluke 62 MAX and Fluke 62 MAX

Designed with your on-the-job needs in mind, the new Fluke 62 MAX Infrared Thermometer and 62 MAX infrared thermometers are everything you’d expect from the experts in measurement tools. Small in size, extremely accurate and very easy to use. IP54 rated for dust and water resistance. Precise yet rugged enough to take a 3-meter drop. In fact, the 62 MAX and 62 MAX are so tough, they’re the only IR thermometers around you can handle without care.

  • Single point offset laser sighting
  • Best accuracy in its class: 1% of reading
  • Holds temperature readings for 7 seconds
  • Dual displays shows current and MAX measurements simultaneously
  • Backlit display for poorly lit areas
  • Comfortable ergonomic handle with protective rubber boot for added durability
  • Fitted carrying case
  • Robust, award winning design
  • Wide temperature range from -30º to 500ºC (–20º to 932ºF)

62 MAX/62 MAX Users Manual