Fluke TL223 SureGrip Electrical Test Lead Set

Test leads are an integral part of the complete measurement system and extend the capabilities of your meter. The Fluke TL223 SureGrip Electrical Test Lead Set is an ideal starter kit for electrical applications. This all in one set includes three test lead accessories with the SureGrip™ design, designed for your comfort so you can focus on taking accurate measurements.

Handy all-in-one kit that includes:

AC220 SureGrip™ Alligator Clip Set
TP1 Slim-Reach™ Test Probes (flat bladed)
TL224 SureGrip™ Silicone Test Lead Set (straight to right)
One year warranty

Fluke TL224 SureGrip Insulated Test Leads

These insulated Fluke TL224 SureGrip Insulated Test Leads provide convenience and variety for test lead configurations by attaching clips, hooks and grabbers as needed.

SureGrip™ accessories are designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.

Test leads are an integral part of the complete measurement system and extend the capabilities of your digital multimeter. The TL224 SureGrip™ Insulated Test leads offer reinforced strain relief and includes banana jack termination for a variety of test lead configurations. SureGrip™ accessories are designed to improve steadiness in slippery hands. Rubber over molded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.

DMM test leads (red, black) with safety shrouded, standard diameter banana plugs
Right angle connector on one end and straight connector on the other
Reinforced strain relief
1.5 meter silicone-insulated wire resists heat & cold
CAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed
One year warranty

Fluke TL26A 5-Way Test Lead Set

The Fluke TL26A 5-Way Test Lead Set has 5 ways to connect:

U-shaped nose for blade-shaped terminals;
Notched jaw for gripping screw heads, bare wire or terminals;
Serrated teeth for gripping threaded or wire-wrapped terminals;
Cluster of sharp needles for piercing small gauge (#22-#28 AWG) wires;
Large piercing needle for penetrating larger gauge wires.

60″ (1.5m), silicone-insulated leads, useable from -80°C to 150°C (-112°F to 302°F). Rated for 30V, 10A. One red, one black.

Fluke TL40 Retractable Tip Test Lead Set

Test leads are an integral part of the complete measurement system and extend the capabilities of your meter. The Fluke TL40 Retractable Tip Test Lead Set The Fluke TL40 Retractable Tip Test Lead Set has one pair (red, black) of test leads with sharp needle point tips adjustable to desired length.

One pair (red, black) of test leads with sharp needle point tips adjustable to desired length from 0 to 76 mm
Extra hard probe tips to provide long service life
Flexible silicone insulated test leads
CAT III 300 V, 3 A rating, UL listed
One year warranty

Fluke TL71 Premium Test Lead Set

Test leads are an integral part of the complete measurement system and extend the capabilities of your digital multimeter. The Fluke TL71 Premium Test Lead Set has one pair of red and black comfort grip probes with flexible silicone-insulated, right-angle test leads. With distinctive comfort grip probes, they are heat and cold resistant with safety ratings up to CAT III 1000 V.

One pair (red, black) comfort grip probes with silicone insulated, right-angle test leads
Recommended for µV measurements
CAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed
One year warranty

Fluke TL75 Hard Point Test Lead Set

Test leads are an integral part of the complete measurement system and extend the capabilities of your digital multimeter. The Fluke TL75 Hard Point Test Lead Set offers the convenience of a test lead and probe-in-one unit with a variety of connections. One pair (red, black) comfort grip probe with PVC insulated right angel shrouded 4 mm (0.16) banana plugs.

One pair (red, black) comfort grip probes with PVC insulated, test leads with right-angle shrouded banana plugs
Recommended for general purpose measurements
CAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed
One year warranty

Fluke TL80A Basic Electronic Test Lead Kit

The Fluke TL80A Basic Electronic Test Lead Kit is a basic electronic test lead kit that has the fundamental accessories for testing electronics. Includes the Fluke TL80A Basic Electronic Test Lead Kit premium test lead set.

One pair (red, black) each 1 meter long silicone test lead set, alligator clip and probe tip extender.
C75 soft carrying case
CAT II 300 V. UL listed
One year warranty

Fluke TL81A Deluxe Electronic Test Lead Kit

FREE UPS GROUND SHIPPING

The Fluke TL81A Deluxe Electronic Test lead kit is ideal for testing electronic equipment. It offers test versatility with modular test probes, alligator clips, test clips and other accessories included and can attach directly to the SureGrip™ test leads. The kit consists of a quad fold nylon pouch containing 11 items.

One meter long test lead with a safety shrouded, right angle banana connector on one end and a stainless steel test probe on the other end, rated up to 10A. Silicone-insulated leads have superior flexibility in cold temperatures and resistance to high temperatures
Insulated alligator clip rated up to 5A
Insulated probe tip extender rated up to 3A
Modular test probe with banana connector in the handle, rated up to 10A
Modular hook-style clip test lead with banana connector, rated up to 5A
Modular pinch-style clip test lead with banana connector, rated up to 5A
Modular alligator clip with banana connector, rated up to 5A
Slide-on IC probe tip adapter (rated up to 3A) and test lead couplers
Bare spade lug with banana connector, rated up to 10A
CAT III 300V
Compatible with Fluke and other multimeters that accept safety shrouded, standard diameter banana connectors
UL approved
One year warranty

Fluke TL910 Electronic Test Probes

Very small 1 mm tips to access hard to reach test points
Probe tip length up to 100 mm, test lead length: 1 m
Included : 3 sets of spring loaded gold tips and 2 sets of stainless steel tips
CAT IV 600 V, CAT III 1000 V, 3 A rating
One year warranty

Compatible Products (14)

Model Name	Description
Fluke 123	Fluke 123 Industrial ScopeMeter® Hand Held Oscilloscope
Fluke 123/S	Fluke 123/S Industrial ScopeMeter® Hand Held Oscilloscope
Fluke 124	Fluke 124 Industrial ScopeMeter® Hand Held Oscilloscope
Fluke 124/S	Fluke 124/S Industrial ScopeMeter® Hand Held Oscilloscopes with SCC120 kit
Fluke 287	Fluke 287 True-RMS Electronics Logging Multimeter
Fluke 289	Fluke 289 True-RMS Industrial Logging Multimeter
Fluke 707	Fluke 707 Loop Calibrator with Quick Click Knob
Fluke 707Ex	Fluke 707Ex Intrinsically Safe Loop Calibrator
Fluke 715	Fluke 715 Volt/mA Calibrator


Fluke 789	Fluke 789 ProcessMeter™
Fluke 83V	Fluke 83V Average Responding Industrial Multimeter
Fluke 87V	Fluke 87V Industrial Multimeter

FLUKE TLK-225 Suregrip Master Accessory Set

FREE UPS GROUND SHIPPING

TLK-225 SUREGRIP MASTER ACCESSORY SET

Includes all the SureGrip™ leads and probes in a handy six-pocket, roll-up pouch, along with TL224 test leads.

Test leads are an integral part of the complete measurement system. Worn out test leads can cause inaccurate readings and pose serious shock or electrocution hazard. The Fluke TLK-225 SureGrip™ Master Accessory Set with 13 items is the perfect replacement kit that provides flexibility and comfort with all SureGrip™ leads and probes in a convenient six pocket, roll up pouch.

Leads and Probes in a Handy Roll-up 6 Pocket Storage Pouch
AC220 SureGrip Alligator Clip Set
AC280 SureGrip Hook Clip Set
AC283 SureGrip Pincer Clip Set
AC285 SureGrip Large Jaw Alligator Clip Set
TP220 SureGrip Test Probe Set

Fluke TPAK ToolPak Magnetic Meter Hanger

The Fluke TPAK ToolPak Magnetic Meter Hanger allows you to hang your meter on nails, hooks and many other objects so you can take your measurements hands-free. The kit includes powerful magnetic hanger, 9 inch hook and loop strap, a hook hanger and a general purpose hanger. Solves any hanging and positioning problem you may face. Attaches to most Fluke meters

The meter hanging solution:

Solves almost any hanging and positioning problem you may face
The universal hanger allows you to hang your meter on nails, hooks and many other objects
Compatible with many Fluke instruments
One year warranty
Kit includes, universal hanger clips (2), hook & loop straps (2 lengths) and strong magnet
Combine components to meet most hanging needs
Attaches to back of a 110/170/180 Series meter, 20/70 -III with integrated holster (with adapter), 724/725 and 50 Series II
One year warranty

Eclipse 400-029 RECEPTACLE TESTER – STANDARD OUTLETS

The Eclipse Tools Receptacle Tester for Standard Outlets tests for correct wiring. It can be plugged in to check outlet polarity, and a light pattern is displayed to indicate status. This is a UL approved and RoHS compliant tester.

Correct Wiring
Open Ground? Reverse Polarity
Open Hot? Open Neutral
Hot on Neutral
Hot and Ground Reversed with Open Hot
Works on 120VAC circuits
Light pattern indicates status
UL approved
RoHS compliant

Eclipse 900-244 BANJO ADAPTOR 4-6-8 PIN

In-line Modular Adapter allows in-line testing for any plug/jack combination. It includes two 4-pair jacks plus a modular cord terminated with 4-pair “universal” plug for accessing any standard 6- or 8-position jack.

Individual conductors are broken out by pin number and correspond to eight separate test pads. Test equipment can be securely attached to the test pads using alligator clips. For quick reference in the field, USOC, T568A, and T568B wiring charts are printed right onto the body.

Eclipse 902-186N Visual Fault Locator for SC/ST Connectors

Eclipse 902-186N Fiber Optic Cable Tester

Eclipse 902-186N Visual Fault Locator for SC/ST Connectors

Eclipse Visual Fault Locator

It features a 635nm Class III A laser source with an output power of 5mW and it can be used on SM (single mode) fibers.

Features Battery-powered, low-cost, basic fiber test tool
Locates breaks, faulty splices and poorly crimped components or connections of 62.5/125u 0.9mm universal connectors
Accepts ST, SC, FC/PC optical connectors
Continuous outputs of high 635nm/5mW Class III A laser diode power and tests over 4km (2.5mi)
Slim, pocket-sized, pen-type design
Includes acrylic carrying case and two 1.5V AAA batteries
Rugged metal housing

VFL

Eclipse MT-7063 POE & LAN CABLE TESTER

PoE Tester

Tests Ethernet network for power over Ethernet existence
Quickly detects the type of the Power Sourcing Equipment
Only for detecting Midspan/Endspan

LAN Cable Tester

Check the RJ11/RJ12/RJ45 pin to pin cable map
Checks for continuity, open, short and crossover wire pairs
Cable mapping up to 984 ft

Eclipse MT-7509 Visual Fault Locator for LC Fiber Connectors

Eclipse MT-7509 Visual Fault Locator for LC Connectors

The Eclipse MT-7509 Fiber Optic Laser Tester is a light source used to locate breaks and misconnections in fiber optic cables. It is an ideal instrument to find the broken or bent patch cords, especially in fiber identification among ribbon or bunched optic fiber pigtails during the installation, in which identifying fiber from end to end may be troublesome or time-consuming. It as a 635nm Class III A laser source with an output power of 5mW and it can be used on SM (single mode) fibers.

The MT-7509 projects a highly visible red light into a fiber optic cable. The operator simply looks at the length of cable and where light is seen, there is a break. Equipped with a high-power, extra long-life, 635nm Class III A laser diode, it operates in a Continuous mode. Any breaks will be seen as a conspicuously glowing red light point.

Simple, versatile, and user-friendly design
Rugged, compact, and splash proof copper housing
Three operation modes available: “CW” (Continuous wave output), “Pulse” and “Off” modes
Continuous wave output mode (CW) for steady fault illumination
Pulse mode helps to locate faults under high ambient light conditions
Supports LC 1.25mm connectors
The button switch permits easy one handed operation
Handy, pocket pen design
2 AAA-size alkaline batteries provide 50 hours of continuous operation

Light Source Class III A Laser Diode
Central Wave Length 635nm/±10nm
Connector Interface 1.25mm; LC only
Peak Power Output > 0.5mW
Operating Temperature 0 ~ 40°C
Storage Temperature 20 ~ 60°C
Dimensions Length: 6″
Diameter: .5″
Batteries 2 AAA (Not included)

VFL

Extech 407026 Heavy Duty Light Meter

FREE UPS GROUND SHIPPING!

Heavy Duty Light Meter with PC Interface

Enhance accuracy by selecting one of four lighting types plus PC interface

Microprocessor assures maximum accuracy plus special functions
Super large 1.4″ LCD display
% displays differential from reference point
ZERO Re-Calibration
Utilizes precision photo diode and color correction filter
Cosine and color corrected measurements
±4% accuracy is enhanced by selecting lighting type
Record/Recall MIN, MAX, and AVG readings
Data Hold plus Auto shut off
Built-in RS232 serial interface, optional software

Extech 407730 Digital Sound Level Meter

Digital Sound Level Meter

±2dB accuracy with 0.1dB resolution
A&C weighting
AC analog output
Record Max/Min values over time
Auto power off and Max Hold functions
Utilizes 0.5″(12.7mm) condenser microphone
Tripod mountable
40 to 130dB measuring range
Fast/slow response time
Tripod mountable

Applications:

Monitoring workplace machinery
Installing audio and alarm systems
Product noise certification and reduction