Fluke 177 True RMS Digital Multimeter

FREE UPS GROUND SHIPPING

Electrician’s Dream!

With its precision, reliability and ease of use, the Fluke 177 True RMS Digital Multimeter is the preferred solution for professional technicians worldwide. Independently tested for safe use in CAT IV 600 V/ CAT III 1000 V environments, the Fluke 177 is the industry standard with all the features you need to troubleshoot and repair many problems in electrical and electronic systems.

The Fluke 177 Digital Multimeter gives you True-rms voltage and current measurements, 6000-count resolution, manual and automatic ranging and provide frequency, capacitance, resistance, continuity and diode measurements. In addition, the Fluke 177 provides higher 0.09% basic accuracy, a digital display with analog bar graph and backlight.

True RMS voltage and current measurements
0.09% basic accuracy
6000 count resolution
Digital display with analog bargraph and backlight
Manual and automatic ranging
Display Hold and Auto Hold
Frequency and capacitance measurements
Resistance, continuity and diode measurements
Min-max-average recording
Smoothing mode allows filtering of rapidly changing inputs
Easy battery exchange without opening the case
Closed case calibration through front panel
Ergonomic case with integrated protective holster
EN61010-1 CAT III 1000V / CAT IV 600V
Measures twice as fast as other multimeters

175, 177 & 179 Users Manual

Fluke 179 True RMS Digital Multimeter

FREE UPS GROUND SHIPPING

I Want No Other Meter in My Toolkit

With its precision, reliability, and ease of use, the Fluke 179 True RMS Digital Multimeter is the preferred solution for professional technicians around the world. With all the features you need to troubleshoot and repair in electrical and electronic systems, the Fluke 179 also offers a digital display with analog bar graph and built-in temperature measurements.

Works When You Need It, Where You Need It

You can trust the Fluke 179 to get the job done in all of the messy, loud, high energy and high places you work. Backed by a lifetime warranty, the Fluke 179 is independently tested for safe use in CAT IV 600 V/CAT III 1000 V environments.

The Fluke 179 – Just One of Fluke’s Trusted Tools

Fluke builds the most trusted tools in the world, and that means more than just the Fluke 179. If you work with the HVAC equipment, need a small meter for small spaces, or work in the electrical installer’s and repairman’s world, check out the full family of Fluke digital multimeters at Kiesub Electronics.

The Fluke 179 True RMS Digital Multimeter is the industry standard for troubleshooting and repair of electrical and electronic systems.

True RMS voltage and current measurements
0.09% basic accuracy
6000 count resolution
Digital display with analog bargraph and backlight
Manual and automatic ranging
Display Hold and Auto Hold
Frequency and capacitance measurements
Resistance, continuity and diode measurements
Temperature measurements
Min-max-average recording
Smoothing mode allows filtering of rapidly changing inputs
Easy battery exchange without opening the case
Closed case calibration through front panel
Ergonomic case with integrated protective holster
EN61010-1 CAT III 1000V / CAT IV 600V
Measures twice as fast as other multimeters

175, 177 & 179 Users Manual

Fluke 1AC II A1 VoltAlert Electrical Tester

The pocket-sized voltage detector

The next generation Fluke 1AC II A1 VoltAlert Electrical Tester non-contact voltage testers from Fluke are easy to use – just touch the tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, you know there’s voltage present. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits in the workplace or at home.

Voltbeat™ technology and continuous self-test – so you always know it’s working
Upon detection, tip glows and beeper sounds
CAT IV 1000 V for added protection
Expanded range: 90 V AC to 1000 V AC
20 V to 90 V AC control circuit model also available
Two-year warranty
Batteries included
On/Off Button
Audible/Silent

Fluke 302+ CAT III Digital Clamp Meter

Fluke 302 CAT III Digital Clamp Meter

The Fluke 302 is a compact, easy-to-use digital clamp meter made to fit the way you work. It is the perfect first-pass troubleshooting tool: small enough to fit in a work bag, tough enough to withstand daily use, and extremely simple to use. All without compromising safety. For everyday applications, where True-RMS accuracy isn’t needed, the Fluke 302 delivers reliable measurements time after time.

Fluke 302 Additional Features

The Fluke 302 CAT III Digital Clamp Meter is more compact, making the use of clamp-type ammeter more flexible and simpler
Measure AC current up to 400A
30 mm large jaw
High accuracy of 1.8%
Backlit display
Two-year warranty

Fluke 302 Comes with Fluke TL75 Hard Point™ Test Lead Set

One pair (red, black) of comfort grip probes
48 inches (1.22 meter) PVC insulated test leads with right-angle shrouded banana plugs
Recommended for general purpose measurements
CAT II 1000 V, 10 A rating
CAT IV 600 V, CAT III 1000 V only with protective cap

Fluke 302 Safety Features

Meets CAT IV 300V/CAT ||| 600V safety rating

Key features

AC current measurements up to 400 A, handling your everyday electrical maintenance needs
Comes with the TL75 Hard Point™ Test Lead Set offering the convenience of a test lead and probe in one unit with a variety of connections
Rugged, easy-to-use digital clamp meter with CAT IV 300 V/CAT III 600 V safety rating

Technical Specifications
AC current	Range	400.0 A
	Accuracy	1.8% ±5
AC voltage	Range	400/600
	Accuracy	1.5% ±5
DC voltage	Range	400/600
	Accuracy	1.5% ±5
DC mV range		–
Resistance	Range	4000 Ω
	Accuracy	1% ±5
Continuity		≤ 70 Ω
Backlight display		Yes
Data hold		Yes
Size	H x W x D (mm)	208 x 58.5 x 28
	Jaw size	30 mm
Safety rating		CAT III 600 V
Temperature		0 ~ 40 °C
Screen refresh rate		> 2 times / sec.
Test leads		TL75
Battery		2 AAA batteries
Warranty		2 years

Includes:

Fluke 302 CAT III Digital Clamp Meter
Fluke TL75 Hard Point™ Test Lead Set
2 AAA batteries (installed)
2-year warranty

Fluke 374 FC True-rms AC/DC Clamp Meter

Fluke 374 FC True-RMS AC/DC Clamp Meter

FREE UPS GROUND SHIPPING

The Fluke 374 FC AC/DC Clamp Meter offers advanced troubleshooting performance and is now part of the Fluke Connect family of wireless test tools.

The Fluke 374 FC directly replaces the Fluke 374 Clamp Meter.

Features:

Trend measurements and pinpoint intermittent faults by connecting your meter to your phone via Fluke Connect® Measurements app.
Transmit results wirelessly via Fluke Connect® Measurements app
Create and send reports right from the field
Stay safely away from the arc flash zone through Bluetooth connectivity to Apple and Android devices
Connect your meter to your smartphone with Fluke Connect Measurements.
Read measurements on your phone at a safe distance, wearing less PPE while your meter takes all the risks.
Record results directly to your phone and the Cloud.
Create and share reports from the field via email, or converse in real-time with ShareLive™ video calls.
Compatible with iFlex flexible current probe; use to expand the measurement range to 2500 A ac; provides access to large conductors in tight spaces.
Compatible with TPAK magnetic hanging strap.
Proprietary inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it.
CAT IV 600 V, CAT III 1000 V safety rating.
Three-year manufacturer warranty.
Soft carrying case.

374 FC/375 FC/376 FC Users Manual

Fluke 375 FC True-rms AC/DC Clamp Meter

Fluke 375 FC True-rms AC/DC Clamp Meter

FREE UPS GROUND SHIPPING

With true-rms ac voltage and current measurements, the Fluke 375 FC 600A True-rms AC/DC Clamp Meter can read up to 600 V and 600 A in both ac and dc modes, and is capable of frequency measurement up to 500 Hz. Additionally, the 375 FC is compatible with the new iFlex flexible current probe (sold separately), which expands the measurement range to 2500 A ac.

The 375 FC directly replaces the Fluke 375.

Features:

Log and trend measurements to pinpoint intermittent faults.
Transmit results wirelessly via Fluke Connect Measurements app.
Create and send reports right from the field.
Stay safely away from the arc flash zone through Bluetooth connectivity to Apple and Android device.
Read measurements on your phone at a safe distance, wearing less PPE while your meter takes all the risks
Record results directly to your phone and the Cloud
Capture intermittent faults while performing other tasks using the logging capabilities of the Fluke 375 FC
Create and share reports from the field via email, or converse in real-time with ShareLive™ video calls
Compatible with iFlex flexible current probe; use to expand the measurement range to 2500 A ac; provides access to large conductors in tight spaces
Compatible with TPAK magnetic hanging strap
Integrated VFD low pass filter for accurate motor drive measurements
Proprietary inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it
CAT IV 600 V, CAT III 1000 V safety rating
Three-year manufacturer warranty
Soft carrying case included

374 FC/375 FC/376 FC Users Manual

Fluke 376 FC True-RMS AC/DC Clamp Meter with iFlex

Fluke 376 FC True-RMS AC/DC Clamp Meter with iFlex

FREE UPS GROUND SHIPPING

You can measure around awkward sized conductors with the Fluke 376 FC True RMS Clamp Meter with iFlex^®, expanding your measurement range to 2500 A ac. With True RMS voltage and current measurements, the Fluke 376 can read up to 1000 V and 1000 A in both ac and dc modes.

The Fluke 376 FC is the direct replacement for the Fluke 376 Clamp Meter.

Features:

Log and trend measurements to pinpoint intermittent faults.
Transmit results wirelessly via Fluke Connect^® Measurements app.
Create and send reports right from the field.
Stay safely away from the arc flash zone through Bluetooth connectivity to Apple and Android devices.
Connect your meter to your smartphone with Fluke Connect Measurements.
Read measurements on your phone at a safe distance, wearing less PPE while your meter takes all the risks.
Record results directly to your phone and the Cloud.
Capture intermittent faults while performing other tasks using the logging capabilities of the Fluke 376 FC.
Create and share reports from the field via email, or converse in real-time with ShareLive™ video calls.
iFlex flexible current probe expands the measurement range to 2500 A ac; provides access to large conductors in tight spaces (included).
TPAK magnetic hanging strap (included).
Integrated VFD low pass filter for accurate motor drive measurements.
Proprietary inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it.
CAT IV 600 V, CAT III 1000 V safety rating.
Three-year warranty.
Soft carrying case.

374 FC/375 FC/376 FC Users Manual

Fluke 381 Remote Display True RMS AC/DC Clamp Meter with iFlex®

Fluke 381 Remote Display True RMS AC/DC Clamp Meter

FREE UPS GROUND SHIPPING

Be ready for anything.

Fluke 381 Remote Display True-rms AC/DC Clamp Meter with iFlex : The Fluke 381 is the first clamp meter with a detachable, remote display and iFlexTM flexible current probe for easier, faster, safer measurements. Be ready for anything. The new Fluke 381 does everything you would expect from a clamp meter, and then lets you remove the display for even more flexibility. Now one technician can do jobs that used to require two people. Clamp the Fluke 381 around a conductor, remove the display and walk across the room to operate controls or remove protective equipment, all while watching real-time readings. The new iFlex flexible current probe (included) expands the measurement range to 2500 A ac while providing increased display flexibility, ability to measure awkward sized conductors and improved wire access.

Wireless technology allows the display to be carried up to 30 ft. away from the point of measurement for added flexibility without interference with measurement accuracy
The removable magnetic display can be conveniently mounted where it is easily seen
iFlex flexible current probe expands the measurement range to 2500 A acCAT IV 600 V, CAT III 1000 V
Integrated low pass filter and state of the art signal processing allows for use in noisy electrical environments while providing stable readings
Proprietary inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it
Ergonomic design fits in your hand and can be used while wearing protective equipment
Radio transmitter automatically sets the correct measurement range so you do not need to change the switch positions while taking a measurement
Three-year warranty

Soft carrying case
Safety Conformance IEC/EN 61010-1:2001, 1000V CAT III, 600V CAT IV

Specifications
Diameter of measurable conductor	1.3” or 34 mm max
Operating temperature	-14 to 122ºF (-10 to 50ºC)
Storage temperature	-40 to 140ºF (-40 to 60ºC)
Operating humidity	< 90% @ 10 to 30 ºC, < 75% @ 30 to 40ºC
Operating altitude	0 to 2000 m
Size	277 x 88 x 43 mm, (10.905 x 3.464 x 1.629 in.)
Weight	350g, (12 oz.)
Temperature coefficient	0.01% ºC (< 18ºC or > 28ºC)
Warranty	Three years for electronics One year for cable and clamp assembly

381 Data Sheet

Fluke 62 MAX Infrared Thermometer

Small in size. Big on toughness.

Why IR Thermometers?

Temperature is often the first indication of potential problems in electrical and mechanical applications. But how can you easily determine if an electrical panel has a hot spot, a motor is overheating or an HVAC system is inefficient? The answer is with an infrared (IR) thermometer. With handheld, non-contact IR thermometers, you can instantly measure equipment temperatures in hard-to-reach or hazardous areas. And with early detection of abnormal temperatures comes early correction of problems.

Fluke 62 MAX and Fluke 62 MAX

Designed with your on-the-job needs in mind, the new Fluke 62 MAX Infrared Thermometer and 62 MAX infrared thermometers are everything you’d expect from the experts in measurement tools. Small in size, extremely accurate and very easy to use. IP54 rated for dust and water resistance. Precise yet rugged enough to take a 3-meter drop. In fact, the 62 MAX and 62 MAX are so tough, they’re the only IR thermometers around you can handle without care.

Single point offset laser sighting
Best accuracy in its class: 1% of reading
Holds temperature readings for 7 seconds
Dual displays shows current and MAX measurements simultaneously
Backlit display for poorly lit areas
Comfortable ergonomic handle with protective rubber boot for added durability
Fitted carrying case
Robust, award winning design
Wide temperature range from -30º to 500ºC (–20º to 932ºF)

62 MAX/62 MAX Users Manual

Fluke H5 Electrical Tester Holster

Protect your Fluke tools with the Fluke H5 Electrical Tester Holster!

Rugged fabric holster includes flap for lead storage and built-in belt loop
Fits Fluke T3 and T5 testers
One year warranty

Fluke LVD2 Volt Light Tester

Fluke LVD2 Volt Light

Non-contact AC voltage detector and LED flashlight combined into one easy to use pen-style design. The LVD2 is a CAT IV 600 V rated non-contact detector that is suitable for commercial and industrial applications. The LVD2 includes dual sensitivity turning blue 1 to 5 (2.54 cm to 12.7 cm) from the source and red when at the source.

Ultra-Bright White LED with 100,000 hour life
Detects from 90 to 600 V AC
Rated to CAT IV 600 V
Dual Levels of Detection
Blue indicates proximity to AC Voltage source
Red indicates you’re at the source
Operating temperature 0 deg C to 50 deg C

Fluke Networks MS2-KIT MicroScanner™ Cable Verifier Kit

Product overview: Fluke Networks MicroScanner™ Cable Verifier Kit

The MicroScanner2 Cable Verifier helps find common errors quickly, displaying results from what were four different test modes all at once on its oversized, backlit LCD display: graphical wire map, pair lengths, distance to fault, cable ID, and far-end device. With the included IntelliTone™ Pro 200 probe, it locates and traces virtually any cable or wire pair via digital and analog toning. The MicroScanner2’s integrated RJ11, RJ45, and coax test ports support virtually any type of low-voltage cable testing, with no need for awkward adapters. The end result is reduced test time and technician error — which makes high-quality installations more efficient and troubleshooting easier.
Specifications apply at 23 °C (73 °F), unless otherwise noted.

Environmental specifications
Operating temperature	32 °F to 113 °F (0 °C to 45 °C)
Storage temperature	-4 °F to +140 °F (-20 °C to +60 °C)
Operating relative humidity (% RH without condensation)	90 % (50 °F to 95 °F 10 °C to 35 °C) 75 % (95 °F to 113 °F 35 °C to 45 °C)
Shock and vibration	Random, 2 g, 5 Hz-500 Hz (Class 2) 1 m drop test with and without wiremap adapter attached
Safety	IEC 61010-1 3rd Edition
Altitude	4,000 m; Storage: 12,000 m
EMC	IEC 61326-1

General specifications
Test connectors	Shielded 8-pin modular jack accepts 8-pin modular (RJ45) and 4-pin modular (RJ11) plugs. MicroScanner²: F-connector for coaxial cable.
Power	Battery type: 2 AA (NEDA 15A, IEC LR6) alkaline batteries Battery life: 20 hours of typical use Other compatible battery types: 2 AA photo lithium, NIMH, NICAD
Dimensions and weight (with batteries installed and wiremap adapter attached)	3 in x 6.4in x 1.4 in (7.6 cm x 16.3 cm x 3.6 cm) MicroScanner²: 10.6 oz (300 g)
Display	Monochrome LCD with backlight

Test modes
Cable test	Measures length, verifies wiremap, identifies remote ID locators, and detects Ethernet ports. MicroScanner PoE also shows HIGH Ω when the resistance of the cable is more than 12.5 Ω. Displays results on one screen.
Tone	Generates Intellitone™ and normal analog toning signals
PoE	MicroScanner²: Solicits and detects the presence of 802.3af compatible PoE (Power over Ethernet) devices

Performance specifications
Cable types tested	Twisted pair: UTP, FTP, SSTP Coaxial (MicroScanner²): 75 Ω, 50 Ω, 93 Ω
Length test	Range: 460 m (1500 ft) Resolution: 0.3 m (1 ft) Typical accuracy: ± 4% or 0.6 m (2 ft) whichever is greater. NVP uncertainty is an additional error. Calibration: User-settable NVP for twisted pair and coax (MicroScanner²). Can determine actual NVP with known length of cable.
Wiremap test	Detects single-wire faults, shorts, miswires, split pairs, and up to seven far-end adapter IDs. The wiremap is drawn with proportional length to visually indicate the approximate location of faults.
Ethernet port detection	MicroScanner²: Detects the advertised speed of 802.3 Ethernet ports with speeds of 10 Mbps, 100 Mbps, and 1 Gbps.
Tone generator	Supports toning and cable mapping with a Fluke Networks digital IntelliTone™ probe. Generates four tones compatible with typical analog probes. SmartTone™ feature gives positive identification of cables in bundles when using an IntelliTone or an analog probe.

Fluke T5-1000 Voltage Tester

FREE UPS GROUND SHIPPING

The Fluke T5 Electrical Tester let you check voltage, continuity and current with one compact tool. With the T5, all you have to do is select volts, ohms, or current and the tester does the rest. OpenJaw™ current lets you check current up to 100A – without breaking the circuit. Its tough test leads stow neatly in the back of the tester, making it easy to tote the T5 in your tool pouch. Detachable SlimReach™ test probes are customized for national electrical standards. The test leads accept optional accessories such as clips and specialty probes.

1000 Volt Model
Automatically measures volts ac and volts dc with precise digital resolution
Displays resistance to 1000Ω
Easy and accurate OpenJaw™ current measurement
Continuity beeper
Compact design with neat probe storage
Rugged enough to withstand a 10-foot (3m) drop
Detachable SlimReach™ probe tips are customized for national electrical standards
Test leads accept Fluke accessory test clips
Can stay connected much longer than solenoid type tester
Auto off mode to conserve battery life

Fluke T5-600 Voltage, Continuity Current Tester

600 Volt Model
Automatically measures volts ac and volts dc with precise digital resolution
Displays resistance to 1000Ω
Easy and accurate OpenJaw™ current measurement
Continuity beeper
Compact design with neat probe storage
Rugged enough to withstand a 10-foot (3m) drop
Detachable SlimReach™ probe tips are customized for national electrical standards
Test leads accept Fluke accessory test clips
Can stay connected much longer than solenoid type tester
Auto off mode to conserve battery life

Fluke T6-1000/AMER Electrical Tester with FieldSense, 1000V

Orders over $100 ship free

Now you can measure voltage without test leads. Be safer, faster, more efficient. And be everywhere, testing where it used to be impossible

Measure voltage … without test leads

FieldSense technology lets you slide the open fork over a conductor and see the voltage level.¹

Be safer: Measure voltage to 1000 V ac through the open fork, without test leads.
Be faster: No need to open covers or remove wire nuts.
Be more efficient: Simultaneously measure voltage and current.
Be everywhere: 17.8 mm open fork is widest in the industry; measure up to 200 A on 4/0 wires (120 mm²).

Measure voltage up to 1000 V ac through the open fork, without test lead contact to live voltage. Without opening covers or removing wire nuts. On wires up to AWG 4/0 (120 mm²), carrying as much as 200 A. It will change your job. Safer. Faster. Easier.

Product Highlights

FieldSense technology for ac voltage, current and frequency measurement without making electrical contact to live voltage
Simultaneous voltage and current display – shows all power supply measurements at a glance for efficient trouble shooting
1 to 1000 V ac or dc (T6-1000)
0.1 to 200 A ac
True-rms voltage and current
Resistance 1 Ω to 100 kΩ
Frequency measurement 45 Hz to 66 Hz
Works with wires up to AWG 4/0 (120 mm²) with a 17.8 mm jaw opening
HOLD button temporarily freezes the reading for easy viewing
Easy to read display with backlight
Accepts optional Fluke TPAK Magnetic Meter Hanger for convenient operation
Standard two-year warranty; extendable to 4 years through product registration within 45 days of purchase*

Voltage measurement requires capacitive path to ground, provided through user in most applications. Ground connection via test lead may be required in some situations. * Register product online within 45 days of purchase to extend warranty to four years. See http://a.fluke.com/registration for details. Two-year additional warranty offer may be discontinued without notice

Measurement Specifications
Function	Requires test leads	Range	Resolution	Accuracy^[1]
FieldSense ac voltage true-rms	No	1000 V	1 V	± (3 % 3 counts) 45 Hz – 66 Hz^[2][3]
FieldSense ac current true-rms	No	200.0 A	0.1 A	± (3% 3 counts) 45 Hz – 66 Hz
FieldSense frequency (Hz)	No	45 Hz – 66 Hz	1 Hz	± (1% 2 counts)^[3]
Volts ac true-rms	Yes	1000 V	1 V	± (1.5% 2 counts) 45 Hz – 66 Hz
Volts dc	Yes	1000 V	1 V	± (1% 2 counts)
Resistance	Yes	2000 Ω	1 Ω	± (1% 2 counts)
	Yes	20.00 kΩ	0.01 kΩ
	Yes	100.0 kΩ	0.1 kΩ
Safety		1000 V CAT III 600 V CAT IV
Accuracy^[1]: ± ( [ % of reading] [number of least significant digits] ). Accuracy is specified for 1 year after calibration, at 18 °C to 28 °C (64 °F to 82 °F) with relative humidity to 90 %. AC measurements are ac-coupled, RMS responding. Accuracy^[2]: Add 3 % without an external ground connection. External ground connection required for user wearing insulated gloves, standing on an insulated ladder, or otherwise insulated from earth ground. Accuracy^[3]: FieldSense is specified from 16 V to 100 % of range.

General Specifications
Calibration	1-year calibration cycle
Dimensions	61.1 x 259.3 x 43.8 mm
Jaw opening	17.8 mm
Weight	0.35 kg (0.78 lb)
Temperature	Operating	-10 °C to 50 °C (14 °F to 122 °F)
	Storage	-30 °C to 60 °C (-22 °F to 140 °F)
Altitude	Operating	2,000 m (6,562 feet)
	Storage	10,000 m (32,808 feet)
Relative Humidity	0% to 90%, 5 °C to 30 °C (41 °F to 86 °F)
	0% to 75%, 30°C to 40 °C (86 °F to 104 °F)
	0% to 45%, 40°C to 50 °C (104 °F to 122 °F)
Battery Type and Life	2 x AA (IEC LR6); 360 hours continuous, typical; 200 hours using FieldSense
Temperature coefficient	0.1 x (specified accuracy) / °C for <18°C or >28 °C
	0.1 x (specified accuracy) / °C for <18°C or >28 °C
Safety	IEC/EN 61010-1: Pollution Degree 2
Electromagnetic Environment	IEC/EN 61326-1: Portable

Includes:

Attached test leads with removable 4 mm probe caps
User documentation

Fluke TL220 SureGrip Industrial Test Lead Set

Fluke TL220 SureGripTM Industrial Test Lead Set

Fluke TL220 SureGrip Industrial Test Lead Set

The Fluke TL220 SureGrip Industrial Test Lead Set is designed to provide a reliable grip in slippery hands, with interchangeable test lead set for multiple electrical applications. Compatible with all instruments and test probes that accept standard 4 mm shrouded banana connectors.

This test lead set with test probes works in multiple electrical applications. SureGrip™ feature is designed to do your work with comfort.

AC220 SureGrip™ Alligator Clip Set
TP220 SureGrip™ Test Probe Set
TL222 SureGrip™ Silicone Test Lead Set (right to right)
One year warranty

Fluke TL221 SureGrip Test Lead Extension Set

The Fluke TL221 SureGrip Test Lead Extension Set is designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.

One pair (red, black) of silicone insulated leads with straight connectors on both ends
Reinforced strain relief
Includes one pair (red, black) of female couplers
Extends test leads by 1.5 m
600 V CAT IV, 1000 V CAT III, 10 A rating. UL listed
One year warranty

Fluke TL222 SureGrip Silicone Insulated Test Leads

Fluke TL222 SureGrip Silicone Insulated Test Leads:

SureGrip™ accessories are designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.

DMM test leads (red, black) with safety shrouded, standard diameter banana plugs
Right angle connector on both ends
Reinforced strain relief
1.5 meter silicone-insulated wire resists heat & cold
CAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed
One year warranty