Fluke 62 MAX Infrared Thermometer

Small in size. Big on toughness.

Why IR Thermometers?

Temperature is often the first indication of potential problems in electrical and mechanical applications. But how can you easily determine if an electrical panel has a hot spot, a motor is overheating or an HVAC system is inefficient? The answer is with an infrared (IR) thermometer. With handheld, non-contact IR thermometers, you can instantly measure equipment temperatures in hard-to-reach or hazardous areas. And with early detection of abnormal temperatures comes early correction of problems.

Fluke 62 MAX and Fluke 62 MAX

Designed with your on-the-job needs in mind, the new Fluke 62 MAX Infrared Thermometer and 62 MAX infrared thermometers are everything you’d expect from the experts in measurement tools. Small in size, extremely accurate and very easy to use. IP54 rated for dust and water resistance. Precise yet rugged enough to take a 3-meter drop. In fact, the 62 MAX and 62 MAX are so tough, they’re the only IR thermometers around you can handle without care.

Single point offset laser sighting
Best accuracy in its class: 1% of reading
Holds temperature readings for 7 seconds
Dual displays shows current and MAX measurements simultaneously
Backlit display for poorly lit areas
Comfortable ergonomic handle with protective rubber boot for added durability
Fitted carrying case
Robust, award winning design
Wide temperature range from -30º to 500ºC (–20º to 932ºF)

62 MAX/62 MAX Users Manual

Fluke 566 Infrared and Contact Thermometer

FREE UPS GROUND SHIPPING

The Fluke 566 two-in-one contact and non contact thermometer can stand up to tough industrial, electrical, and mechanical environments.

Laser guided sighting system for easy targeting with 1 % accuracy
12-point data logging
Advanced optics to measure smaller targets at greater distances
Adjustable emissivity for more accurate temperature measurements
Selectable MAX, MIN, DIF and AVG functions that display values instantly with Hi/Lo Alarm
Expanded measurement range up to 600 ºC (1100 ºF)
Optional probe accessory available for dual contact and non-contact temperature measurements

Fluke TPAK ToolPak Magnetic Meter Hanger

The Fluke TPAK ToolPak Magnetic Meter Hanger allows you to hang your meter on nails, hooks and many other objects so you can take your measurements hands-free. The kit includes powerful magnetic hanger, 9 inch hook and loop strap, a hook hanger and a general purpose hanger. Solves any hanging and positioning problem you may face. Attaches to most Fluke meters

The meter hanging solution:

Solves almost any hanging and positioning problem you may face
The universal hanger allows you to hang your meter on nails, hooks and many other objects
Compatible with many Fluke instruments
One year warranty
Kit includes, universal hanger clips (2), hook & loop straps (2 lengths) and strong magnet
Combine components to meet most hanging needs
Attaches to back of a 110/170/180 Series meter, 20/70 -III with integrated holster (with adapter), 724/725 and 50 Series II
One year warranty

Fluke TL910 Electronic Test Probes

Very small 1 mm tips to access hard to reach test points
Probe tip length up to 100 mm, test lead length: 1 m
Included : 3 sets of spring loaded gold tips and 2 sets of stainless steel tips
CAT IV 600 V, CAT III 1000 V, 3 A rating
One year warranty

Compatible Products (14)

Model Name	Description
Fluke 123	Fluke 123 Industrial ScopeMeter® Hand Held Oscilloscope
Fluke 123/S	Fluke 123/S Industrial ScopeMeter® Hand Held Oscilloscope
Fluke 124	Fluke 124 Industrial ScopeMeter® Hand Held Oscilloscope
Fluke 124/S	Fluke 124/S Industrial ScopeMeter® Hand Held Oscilloscopes with SCC120 kit
Fluke 287	Fluke 287 True-RMS Electronics Logging Multimeter
Fluke 289	Fluke 289 True-RMS Industrial Logging Multimeter
Fluke 707	Fluke 707 Loop Calibrator with Quick Click Knob
Fluke 707Ex	Fluke 707Ex Intrinsically Safe Loop Calibrator
Fluke 715	Fluke 715 Volt/mA Calibrator


Fluke 789	Fluke 789 ProcessMeter™
Fluke 83V	Fluke 83V Average Responding Industrial Multimeter
Fluke 87V	Fluke 87V Industrial Multimeter

Fluke TL75 Hard Point Test Lead Set

Test leads are an integral part of the complete measurement system and extend the capabilities of your digital multimeter. The Fluke TL75 Hard Point Test Lead Set offers the convenience of a test lead and probe-in-one unit with a variety of connections. One pair (red, black) comfort grip probe with PVC insulated right angel shrouded 4 mm (0.16) banana plugs.

One pair (red, black) comfort grip probes with PVC insulated, test leads with right-angle shrouded banana plugs
Recommended for general purpose measurements
CAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed
One year warranty

Fluke TL71 Premium Test Lead Set

Test leads are an integral part of the complete measurement system and extend the capabilities of your digital multimeter. The Fluke TL71 Premium Test Lead Set has one pair of red and black comfort grip probes with flexible silicone-insulated, right-angle test leads. With distinctive comfort grip probes, they are heat and cold resistant with safety ratings up to CAT III 1000 V.

One pair (red, black) comfort grip probes with silicone insulated, right-angle test leads
Recommended for µV measurements
CAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed
One year warranty

Fluke TL26A 5-Way Test Lead Set

The Fluke TL26A 5-Way Test Lead Set has 5 ways to connect:

U-shaped nose for blade-shaped terminals;
Notched jaw for gripping screw heads, bare wire or terminals;
Serrated teeth for gripping threaded or wire-wrapped terminals;
Cluster of sharp needles for piercing small gauge (#22-#28 AWG) wires;
Large piercing needle for penetrating larger gauge wires.

60″ (1.5m), silicone-insulated leads, useable from -80°C to 150°C (-112°F to 302°F). Rated for 30V, 10A. One red, one black.

Fluke TL238 SureGrip Test Lead Set for High Energy Environments

The Fluke TL238 SureGrip Test Lead Set for High Energy Environments provide the convenience and variety for test lead configurations by attaching clips, hooks and grabbers as needed in High Energy Environments.

An accessory kit especially designed for working in high energy environments. The SureGrip™ Test Probe has only 4 mm of exposed metal at the tip. Test probes with less exposed metal help reduce the risk of inadvertant shorts between each other and other metal surfaces that could result in an arc flash explosion. Probe extenders fit between modular test leads and test probes, increasing the distance between you and a live circuit by 20.5 cm.

The kit includes:

TP238 SureGrip™ Insulated Test Probe Set
TP280 SureGrip™ Test Probe Extender
TL224 SureGrip™ Silicone Right Angle/Straight Test Lead Set

TP238 and TL224 conform to safety standard IEC 1010-2-031, maximum 1000V CAT III, 600V CAT IV, Pollution Degree 2, 10A

Probe extenders conform to safety standard IEC 1010-2-031, maximum 1000V CAT III, Pollution Degree 2, 10A

Fluke TL224 SureGrip Insulated Test Leads

These insulated Fluke TL224 SureGrip Insulated Test Leads provide convenience and variety for test lead configurations by attaching clips, hooks and grabbers as needed.

SureGrip™ accessories are designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.

Test leads are an integral part of the complete measurement system and extend the capabilities of your digital multimeter. The TL224 SureGrip™ Insulated Test leads offer reinforced strain relief and includes banana jack termination for a variety of test lead configurations. SureGrip™ accessories are designed to improve steadiness in slippery hands. Rubber over molded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.

DMM test leads (red, black) with safety shrouded, standard diameter banana plugs
Right angle connector on one end and straight connector on the other
Reinforced strain relief
1.5 meter silicone-insulated wire resists heat & cold
CAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed
One year warranty

Fluke TL223 SureGrip Electrical Test Lead Set

Test leads are an integral part of the complete measurement system and extend the capabilities of your meter. The Fluke TL223 SureGrip Electrical Test Lead Set is an ideal starter kit for electrical applications. This all in one set includes three test lead accessories with the SureGrip™ design, designed for your comfort so you can focus on taking accurate measurements.

Handy all-in-one kit that includes:

AC220 SureGrip™ Alligator Clip Set
TP1 Slim-Reach™ Test Probes (flat bladed)
TL224 SureGrip™ Silicone Test Lead Set (straight to right)
One year warranty

Fluke TL220 SureGrip Industrial Test Lead Set

Fluke TL220 SureGripTM Industrial Test Lead Set

Fluke TL220 SureGrip Industrial Test Lead Set

The Fluke TL220 SureGrip Industrial Test Lead Set is designed to provide a reliable grip in slippery hands, with interchangeable test lead set for multiple electrical applications. Compatible with all instruments and test probes that accept standard 4 mm shrouded banana connectors.

This test lead set with test probes works in multiple electrical applications. SureGrip™ feature is designed to do your work with comfort.

AC220 SureGrip™ Alligator Clip Set
TP220 SureGrip™ Test Probe Set
TL222 SureGrip™ Silicone Test Lead Set (right to right)
One year warranty

Fluke i410 AC/DC Current Clamp

FREE UPS GROUND SHIPPING

The Fluke i410 AC/DC Current Clamp expands the functionality of digital multimeters and measures up to 400 amps for both AC and DC current. The large clamp claw gives you access to difficult to reach areas. The kit includes a handy carrying case.

Battery-powered Hall-effect clamp-on probe measures AC/DC current from 1A to 400A
The i410 is a single range ac/dc current clamp with mV output
The i410 is compatible with most Fluke multimeters or any other current measurement device that accepts safety shrouded banana plugs
One year warranty

i410 Instruction Sheet

Fluke C550 Tool Bag

Protect your Fluke tools with the long lasting, durable Fluke C550 Tool Bag!

Steel reinforced frame
Rugged ballistic cloth with heavy duty hardware
Large zippered storage compartment with 25 pockets
Weather resistant
Carry all your tools to the job
One year warranty

Fluke C50 Soft Meter Case

Give your Fluke tools the protection they deserve with the Fluke C50 Soft Meter Case!

Zippered carrying case with inside pocket belt loop and inside meter strap.
One year warranty

Fluke C25 Large Soft Case

Give your Fluke tools the protection they deserve with the Fluke C25 Large Soft Case for DMMs. Protect your meter and conveniently carry it from one job to the next with this handy carrying case!

The C25 carrying case is a durable, zippered carrying case with padding and inside pocket, and high quality polyester exterior. It includes a convenient hand strap and carries most of Fluke’s popular digital multimeters. Our most popular case sold to date!

Zippered carrying case with padding and inside pocket.
One year warranty

Fluke C1600 Gear Box

The C1600 is a rugged, molded plastic case designed to carry Fluke handheld digital multimeters and process calibrators and most accessories used for these meters.

Deep interior large enough to hold and protect your gear and leaves room for accessories and other essentials.
Rubber gasket in lid seals out dust and keeps contents dry.
Lift out tray keeps everything organized.
Snap open compartment on top of lid for easy access to small parts, batteries, probes and leads.
Includes five hook and loop straps to wrap cords and test leads when not in use.
Can be locked.
Large carry handle for comfortable hauling.

C1600 Instruction Sheet

Fluke AC283A SureGrip Pincer Clips

Fluke AC283A SureGrip Pincer Clips

Fluke AC283A SureGrip Pincer Clips designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.

One pair (red, black) of nickel plated pincers open to 5 mm
11.4 cm flexible insulated shaft
Recommended for use with TL222 and TL224 test leads
CAT IV 600 V, CAT III 1000 V, 1 A rating. UL listed
One year warranty

Fluke AC220, AC280, AC283 CE Declaration of Conformity

Fluke AC280 Hook Clips

Fluke AC280 Hook Clips SureGrip™ accessories are designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.

One pair (red, black) of nickel plated clips
Profile narrows to 5.6mm at tip, hook opening 6.4mm at front, 2mm at base
Recommended for use with TL222 and TL224 test leads
CAT IV 600 V, CAT III 1000 V, 3 A rating. UL listed
One year warranty

Fluke AC280 Declaration of Conformity