Fluke 62 MAX Infrared Thermometer

Small in size. Big on toughness.

Why IR Thermometers?

Temperature is often the first indication of potential problems in electrical and mechanical applications. But how can you easily determine if an electrical panel has a hot spot, a motor is overheating or an HVAC system is inefficient? The answer is with an infrared (IR) thermometer. With handheld, non-contact IR thermometers, you can instantly measure equipment temperatures in hard-to-reach or hazardous areas. And with early detection of abnormal temperatures comes early correction of problems.

Fluke 62 MAX and Fluke 62 MAX

Designed with your on-the-job needs in mind, the new Fluke 62 MAX Infrared Thermometer and 62 MAX infrared thermometers are everything you’d expect from the experts in measurement tools. Small in size, extremely accurate and very easy to use. IP54 rated for dust and water resistance. Precise yet rugged enough to take a 3-meter drop. In fact, the 62 MAX and 62 MAX are so tough, they’re the only IR thermometers around you can handle without care.

Single point offset laser sighting
Best accuracy in its class: 1% of reading
Holds temperature readings for 7 seconds
Dual displays shows current and MAX measurements simultaneously
Backlit display for poorly lit areas
Comfortable ergonomic handle with protective rubber boot for added durability
Fitted carrying case
Robust, award winning design
Wide temperature range from -30º to 500ºC (–20º to 932ºF)

62 MAX/62 MAX Users Manual

Fluke LVD2 Volt Light Tester

Fluke LVD2 Volt Light

Non-contact AC voltage detector and LED flashlight combined into one easy to use pen-style design. The LVD2 is a CAT IV 600 V rated non-contact detector that is suitable for commercial and industrial applications. The LVD2 includes dual sensitivity turning blue 1 to 5 (2.54 cm to 12.7 cm) from the source and red when at the source.

Ultra-Bright White LED with 100,000 hour life
Detects from 90 to 600 V AC
Rated to CAT IV 600 V
Dual Levels of Detection
Blue indicates proximity to AC Voltage source
Red indicates you’re at the source
Operating temperature 0 deg C to 50 deg C

Fluke Networks MS2-KIT MicroScanner™ Cable Verifier Kit

Product overview: Fluke Networks MicroScanner™ Cable Verifier Kit

The MicroScanner2 Cable Verifier helps find common errors quickly, displaying results from what were four different test modes all at once on its oversized, backlit LCD display: graphical wire map, pair lengths, distance to fault, cable ID, and far-end device. With the included IntelliTone™ Pro 200 probe, it locates and traces virtually any cable or wire pair via digital and analog toning. The MicroScanner2’s integrated RJ11, RJ45, and coax test ports support virtually any type of low-voltage cable testing, with no need for awkward adapters. The end result is reduced test time and technician error — which makes high-quality installations more efficient and troubleshooting easier.
Specifications apply at 23 °C (73 °F), unless otherwise noted.

Environmental specifications
Operating temperature	32 °F to 113 °F (0 °C to 45 °C)
Storage temperature	-4 °F to +140 °F (-20 °C to +60 °C)
Operating relative humidity (% RH without condensation)	90 % (50 °F to 95 °F 10 °C to 35 °C) 75 % (95 °F to 113 °F 35 °C to 45 °C)
Shock and vibration	Random, 2 g, 5 Hz-500 Hz (Class 2) 1 m drop test with and without wiremap adapter attached
Safety	IEC 61010-1 3rd Edition
Altitude	4,000 m; Storage: 12,000 m
EMC	IEC 61326-1

General specifications
Test connectors	Shielded 8-pin modular jack accepts 8-pin modular (RJ45) and 4-pin modular (RJ11) plugs. MicroScanner²: F-connector for coaxial cable.
Power	Battery type: 2 AA (NEDA 15A, IEC LR6) alkaline batteries Battery life: 20 hours of typical use Other compatible battery types: 2 AA photo lithium, NIMH, NICAD
Dimensions and weight (with batteries installed and wiremap adapter attached)	3 in x 6.4in x 1.4 in (7.6 cm x 16.3 cm x 3.6 cm) MicroScanner²: 10.6 oz (300 g)
Display	Monochrome LCD with backlight

Test modes
Cable test	Measures length, verifies wiremap, identifies remote ID locators, and detects Ethernet ports. MicroScanner PoE also shows HIGH Ω when the resistance of the cable is more than 12.5 Ω. Displays results on one screen.
Tone	Generates Intellitone™ and normal analog toning signals
PoE	MicroScanner²: Solicits and detects the presence of 802.3af compatible PoE (Power over Ethernet) devices

Performance specifications
Cable types tested	Twisted pair: UTP, FTP, SSTP Coaxial (MicroScanner²): 75 Ω, 50 Ω, 93 Ω
Length test	Range: 460 m (1500 ft) Resolution: 0.3 m (1 ft) Typical accuracy: ± 4% or 0.6 m (2 ft) whichever is greater. NVP uncertainty is an additional error. Calibration: User-settable NVP for twisted pair and coax (MicroScanner²). Can determine actual NVP with known length of cable.
Wiremap test	Detects single-wire faults, shorts, miswires, split pairs, and up to seven far-end adapter IDs. The wiremap is drawn with proportional length to visually indicate the approximate location of faults.
Ethernet port detection	MicroScanner²: Detects the advertised speed of 802.3 Ethernet ports with speeds of 10 Mbps, 100 Mbps, and 1 Gbps.
Tone generator	Supports toning and cable mapping with a Fluke Networks digital IntelliTone™ probe. Generates four tones compatible with typical analog probes. SmartTone™ feature gives positive identification of cables in bundles when using an IntelliTone or an analog probe.

Fluke TL220 SureGrip Industrial Test Lead Set

Fluke TL220 SureGripTM Industrial Test Lead Set

Fluke TL220 SureGrip Industrial Test Lead Set

The Fluke TL220 SureGrip Industrial Test Lead Set is designed to provide a reliable grip in slippery hands, with interchangeable test lead set for multiple electrical applications. Compatible with all instruments and test probes that accept standard 4 mm shrouded banana connectors.

This test lead set with test probes works in multiple electrical applications. SureGrip™ feature is designed to do your work with comfort.

AC220 SureGrip™ Alligator Clip Set
TP220 SureGrip™ Test Probe Set
TL222 SureGrip™ Silicone Test Lead Set (right to right)
One year warranty

Fluke TL223 SureGrip Electrical Test Lead Set

Test leads are an integral part of the complete measurement system and extend the capabilities of your meter. The Fluke TL223 SureGrip Electrical Test Lead Set is an ideal starter kit for electrical applications. This all in one set includes three test lead accessories with the SureGrip™ design, designed for your comfort so you can focus on taking accurate measurements.

Handy all-in-one kit that includes:

AC220 SureGrip™ Alligator Clip Set
TP1 Slim-Reach™ Test Probes (flat bladed)
TL224 SureGrip™ Silicone Test Lead Set (straight to right)
One year warranty

Fluke TL224 SureGrip Insulated Test Leads

These insulated Fluke TL224 SureGrip Insulated Test Leads provide convenience and variety for test lead configurations by attaching clips, hooks and grabbers as needed.

SureGrip™ accessories are designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.

Test leads are an integral part of the complete measurement system and extend the capabilities of your digital multimeter. The TL224 SureGrip™ Insulated Test leads offer reinforced strain relief and includes banana jack termination for a variety of test lead configurations. SureGrip™ accessories are designed to improve steadiness in slippery hands. Rubber over molded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.

DMM test leads (red, black) with safety shrouded, standard diameter banana plugs
Right angle connector on one end and straight connector on the other
Reinforced strain relief
1.5 meter silicone-insulated wire resists heat & cold
CAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed
One year warranty

Fluke TL26A 5-Way Test Lead Set

The Fluke TL26A 5-Way Test Lead Set has 5 ways to connect:

U-shaped nose for blade-shaped terminals;
Notched jaw for gripping screw heads, bare wire or terminals;
Serrated teeth for gripping threaded or wire-wrapped terminals;
Cluster of sharp needles for piercing small gauge (#22-#28 AWG) wires;
Large piercing needle for penetrating larger gauge wires.

60″ (1.5m), silicone-insulated leads, useable from -80°C to 150°C (-112°F to 302°F). Rated for 30V, 10A. One red, one black.

Fluke TL71 Premium Test Lead Set

Test leads are an integral part of the complete measurement system and extend the capabilities of your digital multimeter. The Fluke TL71 Premium Test Lead Set has one pair of red and black comfort grip probes with flexible silicone-insulated, right-angle test leads. With distinctive comfort grip probes, they are heat and cold resistant with safety ratings up to CAT III 1000 V.

One pair (red, black) comfort grip probes with silicone insulated, right-angle test leads
Recommended for µV measurements
CAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed
One year warranty

Fluke TL75 Hard Point Test Lead Set

Test leads are an integral part of the complete measurement system and extend the capabilities of your digital multimeter. The Fluke TL75 Hard Point Test Lead Set offers the convenience of a test lead and probe-in-one unit with a variety of connections. One pair (red, black) comfort grip probe with PVC insulated right angel shrouded 4 mm (0.16) banana plugs.

One pair (red, black) comfort grip probes with PVC insulated, test leads with right-angle shrouded banana plugs
Recommended for general purpose measurements
CAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed
One year warranty

Fluke TL910 Electronic Test Probes

Very small 1 mm tips to access hard to reach test points
Probe tip length up to 100 mm, test lead length: 1 m
Included : 3 sets of spring loaded gold tips and 2 sets of stainless steel tips
CAT IV 600 V, CAT III 1000 V, 3 A rating
One year warranty

Compatible Products (14)

Model Name	Description
Fluke 123	Fluke 123 Industrial ScopeMeter® Hand Held Oscilloscope
Fluke 123/S	Fluke 123/S Industrial ScopeMeter® Hand Held Oscilloscope
Fluke 124	Fluke 124 Industrial ScopeMeter® Hand Held Oscilloscope
Fluke 124/S	Fluke 124/S Industrial ScopeMeter® Hand Held Oscilloscopes with SCC120 kit
Fluke 287	Fluke 287 True-RMS Electronics Logging Multimeter
Fluke 289	Fluke 289 True-RMS Industrial Logging Multimeter
Fluke 707	Fluke 707 Loop Calibrator with Quick Click Knob
Fluke 707Ex	Fluke 707Ex Intrinsically Safe Loop Calibrator
Fluke 715	Fluke 715 Volt/mA Calibrator


Fluke 789	Fluke 789 ProcessMeter™
Fluke 83V	Fluke 83V Average Responding Industrial Multimeter
Fluke 87V	Fluke 87V Industrial Multimeter

FLUKE TLK-225 Suregrip Master Accessory Set

FREE UPS GROUND SHIPPING

TLK-225 SUREGRIP MASTER ACCESSORY SET

Includes all the SureGrip™ leads and probes in a handy six-pocket, roll-up pouch, along with TL224 test leads.

Test leads are an integral part of the complete measurement system. Worn out test leads can cause inaccurate readings and pose serious shock or electrocution hazard. The Fluke TLK-225 SureGrip™ Master Accessory Set with 13 items is the perfect replacement kit that provides flexibility and comfort with all SureGrip™ leads and probes in a convenient six pocket, roll up pouch.

Leads and Probes in a Handy Roll-up 6 Pocket Storage Pouch
AC220 SureGrip Alligator Clip Set
AC280 SureGrip Hook Clip Set
AC283 SureGrip Pincer Clip Set
AC285 SureGrip Large Jaw Alligator Clip Set
TP220 SureGrip Test Probe Set

Fluke TPAK ToolPak Magnetic Meter Hanger

The Fluke TPAK ToolPak Magnetic Meter Hanger allows you to hang your meter on nails, hooks and many other objects so you can take your measurements hands-free. The kit includes powerful magnetic hanger, 9 inch hook and loop strap, a hook hanger and a general purpose hanger. Solves any hanging and positioning problem you may face. Attaches to most Fluke meters

The meter hanging solution:

Solves almost any hanging and positioning problem you may face
The universal hanger allows you to hang your meter on nails, hooks and many other objects
Compatible with many Fluke instruments
One year warranty
Kit includes, universal hanger clips (2), hook & loop straps (2 lengths) and strong magnet
Combine components to meet most hanging needs
Attaches to back of a 110/170/180 Series meter, 20/70 -III with integrated holster (with adapter), 724/725 and 50 Series II
One year warranty