Eclipse MT-7509 Visual Fault Locator for LC Fiber Connectors

MT-7509

Eclipse MT-7509 Visual Fault Locator for LC  Connectors

The Eclipse MT-7509 Fiber Optic Laser Tester is a light source used to locate breaks and misconnections in fiber optic cables. It is an ideal instrument to find the broken or bent patch cords, especially in fiber identification among ribbon or bunched optic fiber pigtails during the installation, in which identifying fiber from end to end may be troublesome or time-consuming. It as a 635nm Class III A laser source with an output power of 5mW and it can be used on SM (single mode) fibers.

The MT-7509 projects a highly visible red light into a fiber optic cable. The operator simply looks at the length of cable and where light is seen, there is a break. Equipped with a high-power, extra long-life, 635nm Class III A laser diode, it operates in a Continuous mode. Any breaks will be seen as a conspicuously glowing red light point.

  • Simple, versatile, and user-friendly design
  • Rugged, compact, and splash proof copper housing
  • Three operation modes available: “CW” (Continuous wave output), “Pulse” and “Off” modes
  • Continuous wave output mode (CW) for steady fault illumination
  • Pulse mode helps to locate faults under high ambient light conditions
  • Supports LC 1.25mm connectors
  • The button switch permits easy one handed operation
  • Handy, pocket pen design
  • 2 AAA-size alkaline batteries provide 50 hours of continuous operation
  • Light Source Class III A Laser Diode
  • Central Wave Length 635nm/±10nm
  • Connector Interface 1.25mm; LC only
  • Peak Power Output > 0.5mW
  • Operating Temperature 0 ~ 40°C
  • Storage Temperature 20 ~ 60°C
  • Dimensions Length: 6″
  • Diameter: .5″
  • Batteries 2 AAA (Not included)

VFL

 



876146001689 Fiber Optic Continuity Tester

876146001689 Fiber Optic Continuity Tester

F1-5000U

650nm LED Multimode Fiber Continuity Tester with 2.5mm Universal Adapter for SC, ST, FC

This Fiber Optic Continuity Tester is an excellent tool for fiber identification when multiple fibers are present. Simply connect your ST,FC, or SMA connector to the adapter and push the on/off button. The red LED light is transmitted down the fiber and escapes through the other end. The unit operates on two supplied AA batteries. The durable rubber packaging easily stores in a tool box. The continuity tester is a low cost, high quality unit.

This unit utilizes a red color LED to provide multimode only fiber continuity testing. It is excellent for continuity verification or simple fiber identification in an interconnect location. The flashlight shape and durable hard rubber casing make it very easy to work with.

This unit has a 2.5mm universal adapter which can accept all 2.5mm ferrule connectors such as FC, SC, ST and E2000.

Please note:

This unit can not replace the functions of a laser-based fault locator. Laser Fault Locators utilize a much higher powerful 650nm red laser to find breakage and bad bends in single mode and multimode fibers.

Battery: (2) AA Alkaline

Size 1.75” x 7.0”

Connector Styles 2.5um universal: ST SC FC SMA

(If needed, a hybrid patchcord and mating sleeve will enable efficient hook-ups to other connector styles.)

 

 



Eclipse 902-186N Visual Fault Locator for SC/ST Connectors

Eclipse 902-186N Fiber Optic Cable Tester

Eclipse 902-186N Visual Fault Locator for SC/ST Connectors

Eclipse Visual Fault Locator

It features a 635nm Class III A laser source with an output power of 5mW and it can be used on SM (single mode) fibers.

  • Features Battery-powered, low-cost, basic fiber test tool
  • Locates breaks, faulty splices and poorly crimped components or connections of 62.5/125u 0.9mm universal connectors
  • Accepts ST, SC, FC/PC optical connectors
  • Continuous outputs of high 635nm/5mW Class III A laser diode power and tests over 4km (2.5mi)
  • Slim, pocket-sized, pen-type design
  • Includes acrylic carrying case and two 1.5V AAA batteries
  • Rugged metal housing

VFL



Fiber Optic Laser Pocket Fault Checker

876146001696 Fiber Optic Pocket Fault Checker

Fiber Optic Laser Pocket Fault Checker

FREE UPS GROUND SHIPPING!

  • All Aluminum Construction
  • 650nm Laser
  • 2.5mm or 1.25mm Universal Adapter
  • Finds Sharp Bends and Breaks
  • Tests for Continuity
  • 6-7km Singlemode
  • 4-5km Multimode
  • Nylon Belt Holster
  • Extra-Long Battery Life with Two AA Batteries
  • Continuous and Modulated Modes
  • Includes Wrist Strap
  • p/n 876146001696