Klein Tools RT210 GFCI Outlet Tester

Klein Tools Receptacle Testers are designed to detect the most common wiring problems in standard and GFCI receptacles. A convenient chart on the tester helps determine wiring condition in outlet, based on lights results. Conditions indicated: open ground, reverse polarity, open hot, open neutral, hot/ground reversed.

GFCI Tester detects the most common wiring problems in standard and GFCI receptacles
Works on GFCI outlets and confirms operation of the ground fault protective device
Built to withstand a 6.6-foot (2m) drop
Operating temp: 32-Degree to 140-Degree Fahrenheit (0-Degree to 40-Degree Celsius)
Nominal Voltage: 110/125V AC at 50/60Hz in 3-wire outlet

Klein Tools RT110 Receptacle Tester

Klein Tools RT110 Receptacle Tester detects the most common wiring problems in standard receptacles. Conditions indicated: wiring correct, open ground, reverse electrical outlet, open hot, open neutral, hot/ground reversed. Conditions not indicated: quality of ground, multiple hot wires, combinations of defects, reversal of grounded and grounding conductors.

Outlet tester’s light sequence on receptacle tester indicates correct/incorrect wiring
Receptacle tester conforms to UL Std 1436, Certified to CSA Std C22.2 #160
Operating temp: 32-degrees F to 140-degrees F (0-degrees C to 40-degrees C)
Built to withstand a 6.6-foot (2m) drop
Nominal Voltage: 110/125V AC at 50/60Hz in 3-wire outlet
Designed to detect the most common wiring problems in standard receptacles

Klein Tools NCVT-4IR Non-Contact Voltage Tester Pen, 12-1000 AC V with Infrared Thermometer

Klein Tools NCVT-4IR is a voltage tester that provides non-contact determination of AC voltage in cables, cords, circuit breakers, switches, outlets and wires; as well as infrared (IR) thermometer measurements, making it the perfect choice for HVAC professionals.

Voltage Tester designed specifically for HVAC applications
Non-Contact Voltage Tester provides non-contact determination of AC voltage in cables, cords, circuit breakers, switches, outlets and wires, and AC voltage in security, entertainment, communications, environmental control, and irrigation systems
Detects AC voltage from 12 to 1000V with visual and audible indicators
4:1 distance-to-spot ratio IR thermometer with user selectable Degrees Fahrenheit or Degrees Celsius from -22 to 482-Degree Fahrenheit (-30 to 250-Degree Celsius)
Convenient laser pointer to target measurement area for temperature measurement
Backlit LCD display with 0.1-Degree resolution
Auto power-off conserves and extends battery life
Screw-thread battery cap with O-ring ensures dust and water resistance
Lightweight, compact tool with pocket clip provides easy storage and quick access

Klein Tools NCVT2P Dual Range Non-Contact Voltage Tester 12 – 1000V AC

The NCVT-2P is a non-contact voltage tester that detects 12 to 1000V AC and indicates the presence of voltage in cables, cords, circuit breakers, light fixtures, switches, outlets and wires as well as AC voltage in doorbells, thermostats, low voltage lighting and irrigation systems. Includes both visual and audible signals. The NCVT-2P is rugged enough for any job site.

Non contact voltage tester’s dual-range capabilities allow tester to detect from 12 to 1000 V AC or 70 to 1000V AC for a broad variety of low-voltage or standard voltage applications
Electrical voltage tester detects voltage with simultaneous visual and audible indicators
Non-contact detection of low voltage in security, entertainment, communications, environmental control, and irrigation systems
Green light indicates no voltage
Lightweight, compact tool with pocket clip provides convenient storage and quick access
Auto power-off feature conserves and extends battery life
CAT IV 1000 V rating provides expanded operation and protection
Screw-thread battery cap with O-ring ensures protection against dust and water ingress
6.6-Foot (2 m) drop protection
IP54: Dustproof and waterproof

Klein Tools ET310 Digital Circuit Breaker Finder with GFCI Outlet Tester

The Klein Tools ET310 Circuit Breaker Finder with Integrated GFCI Outlet Tester is a digital circuit breaker finder used to locate the correct circuit breaker in a panel to which an electrical outlet or fixture is connected. The Transmitter is connected to the electrical outlet or fixture in the circuit while the receiver is used to scan the breakers in the circuit panel. The Transmitter also features a GFCI outlet tester.

This circuit breaker finder can quickly and accurately locate the correct circuit breaker in a panel corresponding to the circuit to which an electrical outlet or fixture is connected
GFCI tester consists of two parts: a Transmitter connected to the electrical outlet or fixture, and a Receiver used to scan the panel to locate the correct breaker
Receiver delivers clear visual and audible indications when the correct breaker has been located
Operates on 90-120V AC circuits
Transmitter incorporates a GFCI outlet tester to inspect the wiring condition at the electrical outlet and test GFCI devices
Transmitter docks in the Receiver for convenient storage as a single item when tester is not is use
Transmitter incorporates a three-pin plug for connecting to North-American-style grounded electrical outlets
The transmitter may be connected to other electrical fixtures using optional accessories which are sold separately (Cat. No. 69411)
Receiver powers off automatically after approximately three minutes of non-use to conserve battery life
Transmitter is powered by the circuit when connected to the electrical outlet or fixture

Fluke T6-1000 Electrical Tester with FieldSense, 1000V

Orders over $100 ship free

Now you can measure voltage without test leads. Be safer, faster, more efficient. And be everywhere, testing where it used to be impossible

Measure voltage … without test leads

FieldSense technology lets you slide the open fork over a conductor and see the voltage level.¹

Be safer: Measure voltage to 1000 V ac through the open fork, without test leads.
Be faster: No need to open covers or remove wire nuts.
Be more efficient: Simultaneously measure voltage and current.
Be everywhere: 17.8 mm open fork is widest in the industry; measure up to 200 A on 4/0 wires (120 mm²).

Measure voltage up to 1000 V ac through the open fork, without test lead contact to live voltage. Without opening covers or removing wire nuts. On wires up to AWG 4/0 (120 mm²), carrying as much as 200 A. It will change your job. Safer. Faster. Easier.

Product Highlights

FieldSense technology for ac voltage, current and frequency measurement without making electrical contact to live voltage
Simultaneous voltage and current display – shows all power supply measurements at a glance for efficient trouble shooting
1 to 1000 V ac or dc (T6-1000)
0.1 to 200 A ac
True-rms voltage and current
Resistance 1 Ω to 100 kΩ
Frequency measurement 45 Hz to 66 Hz
Works with wires up to AWG 4/0 (120 mm²) with a 17.8 mm jaw opening
HOLD button temporarily freezes the reading for easy viewing
Easy to read display with backlight
Accepts optional Fluke TPAK Magnetic Meter Hanger for convenient operation
Standard two-year warranty; extendable to 4 years through product registration within 45 days of purchase*

Voltage measurement requires capacitive path to ground, provided through user in most applications. Ground connection via test lead may be required in some situations. * Register product online within 45 days of purchase to extend warranty to four years. See http://a.fluke.com/registration for details. Two-year additional warranty offer may be discontinued without notice

Measurement Specifications
Function	Requires test leads	Range	Resolution	Accuracy^[1]
FieldSense ac voltage true-rms	No	1000 V	1 V	± (3 % 3 counts) 45 Hz – 66 Hz^[2][3]
FieldSense ac current true-rms	No	200.0 A	0.1 A	± (3% 3 counts) 45 Hz – 66 Hz
FieldSense frequency (Hz)	No	45 Hz – 66 Hz	1 Hz	± (1% 2 counts)^[3]
Volts ac true-rms	Yes	1000 V	1 V	± (1.5% 2 counts) 45 Hz – 66 Hz
Volts dc	Yes	1000 V	1 V	± (1% 2 counts)
Resistance	Yes	2000 Ω	1 Ω	± (1% 2 counts)
	Yes	20.00 kΩ	0.01 kΩ
	Yes	100.0 kΩ	0.1 kΩ
Safety		1000 V CAT III 600 V CAT IV
Accuracy^[1]: ± ( [ % of reading] [number of least significant digits] ). Accuracy is specified for 1 year after calibration, at 18 °C to 28 °C (64 °F to 82 °F) with relative humidity to 90 %. AC measurements are ac-coupled, RMS responding. Accuracy^[2]: Add 3 % without an external ground connection. External ground connection required for user wearing insulated gloves, standing on an insulated ladder, or otherwise insulated from earth ground. Accuracy^[3]: FieldSense is specified from 16 V to 100 % of range.

General Specifications
Calibration	1-year calibration cycle
Dimensions	61.1 x 259.3 x 43.8 mm
Jaw opening	17.8 mm
Weight	0.35 kg (0.78 lb)
Temperature	Operating	-10 °C to 50 °C (14 °F to 122 °F)
	Storage	-30 °C to 60 °C (-22 °F to 140 °F)
Altitude	Operating	2,000 m (6,562 feet)
	Storage	10,000 m (32,808 feet)
Relative Humidity	0% to 90%, 5 °C to 30 °C (41 °F to 86 °F)
	0% to 75%, 30°C to 40 °C (86 °F to 104 °F)
	0% to 45%, 40°C to 50 °C (104 °F to 122 °F)
Battery Type and Life	2 x AA (IEC LR6); 360 hours continuous, typical; 200 hours using FieldSense
Temperature coefficient	0.1 x (specified accuracy) / °C for <18°C or >28 °C
	0.1 x (specified accuracy) / °C for <18°C or >28 °C
Safety	IEC/EN 61010-1: Pollution Degree 2
Electromagnetic Environment	IEC/EN 61326-1: Portable

Includes:

Attached test leads with removable 4 mm probe caps
User documentation

Fluke T6-600 Electrical Tester with FieldSense, 600V

Orders over $100 ship free

Now you can measure voltage without test leads. Be safer, faster, more efficient. And be everywhere, testing where it used to be impossible.

Measure voltage … without test leads

FieldSense technology lets you slide the open fork over a conductor and see the voltage level.¹

Be safer: Measure voltage to 600 V ac through the open fork, without test leads.
Be faster: No need to open covers or remove wire nuts.
Be everywhere: 17.8 mm open fork is widest in the industry; measure up to 200 A on 4/0 wires (120 mm²).

Measure voltage up to 600 V ac through the open fork, without test lead contact to live voltage. Without opening covers or removing wire nuts. On wires up to AWG 4/0 (120 mm²), carrying as much as 200 A. It will change your job. Safer. Faster. Easier.

Product Highlights

FieldSense technology for ac voltage, current and frequency measurement without making electrical contact to live voltage
1 to 600 V ac
0.1 to 200 A ac
True-rms voltage and current
Resistance 1 Ω to 2000 Ω
Works with wires up to AWG 4/0 (120 mm²) with a 17.8 mm jaw opening
HOLD button temporarily freezes the reading for easy viewing
Easy to read display with backlight
Accepts optional Fluke TPAK Magnetic Meter Hanger for convenient operation
Standard two-year warranty; extendable to 4 years through product registration within 45 days of purchase*

Voltage measurement requires capacitive path to ground, provided through user in most applications. Ground connection via test lead may be required in some situations.
* Register product online within 45 days of purchase to extend warranty to four years. See http://a.fluke.com/registration for details. Two-year additional warranty offer may be discontinued without notice

Measurement Specifications
Function	Requires test leads	Range	Resolution	Accuracy^[1]
FieldSense ac voltage true-rms	No	600 V	1 V	±(3% 3 counts) 45 Hz – 66 Hz^[2][3]
FieldSense ac current true-rms	No	200.0 A	0.1 A	±(3% 3 counts) 45 Hz – 66 Hz
FieldSense frequency (Hz)	No		1 Hz	±(1% 2 counts)^[3]
Volts ac true-rms	Yes	600 V	1 V	±(1.5% 2 counts) 45 Hz – 66 Hz
Volts dc	Yes	600 V	1 V	±(1% 2 counts)
Resistance	Yes	2000 Ω	1 Ω	±(1% 2 counts)
Safety		600 V CAT III
Accuracy^[1]: ± ( [ % of reading] [number of least significant digits] ). Accuracy is specified for 1 year after calibration, at 18 °C to 28 °C (64 °F to 82 °F) with relative humidity to 90 %. AC measurements are ac-coupled, RMS responding. Accuracy^[2]: Add 3 % without an external ground connection. External ground connection required for user wearing insulated gloves, standing on an insulated ladder, or otherwise insulated from earth ground. Accuracy^[3]: FieldSense is specified from 16 V to 100 % of range.

General Specifications
Calibration	1-year calibration cycle
Dimensions	61.1 x 259.3 x 43.8 mm
Jaw opening	17.8 mm
Weight	0.35 kg (0.78 lb)
Temperature	Operating	-10 °C to 50 °C (14 °F to 122 °F)
	Storage	-30 °C to 60 °C (-22 °F to 140 °F)
Altitude	Operating	2,000 m (6,562 feet)
	Storage	10,000 m (32,808 feet)
Relative Humidity	0% to 90%, 5 °C to 30 °C (41 °F to 86 °F)
	0% to 75%, 30°C to 40 °C (86 °F to 104 °F)
	0% to 45%, 40°C to 50 °C (104 °F to 122 °F)
Battery Type and Life	2 x AA (IEC LR6); 360 hours continuous, typical; 200 hours using FieldSense
Temperature coefficient	0.1 x (specified accuracy) / °C for <18°C or >28 °C
	(< 64.4 °F or > 82.4 °F)
Safety	IEC/EN 61010-1: Pollution Degree 2
Electromagnetic Environment	IEC/EN 61326-1: Portable

Includes:

Attached test leads with removable 4 mm probe caps, user documentation

Klein Tools NCVT3P Dual Range Non-Contact Voltage Tester with Flashlight, 12 – 1000V AC

Klein Tools NCVT-3 Non Contact Voltage Tester w/flashlight Provides non-contact detection of AC voltage in cables, cords, circuit breakers, light fixtures, switches, outlets and wires as well as AC voltage in doorbells, thermostats, low voltage lighting and irrigation systems.

Voltage Tester provides non-contact detection of low voltage in security, entertainment, communications, environmental control, and irrigation systems
Detects voltage with simultaneous visual and audible voltage indicators
Bright flashlight illuminates work area and may be used independent of voltage detection function
Green light indicates no voltage
Lightweight, compact tool with pocket clip provides convenient storage and quick access
Auto power-off feature conserves and extends battery life
CAT IV 1000V rating provides expanded operation and protection
Screw-thread battery cap with O-ring ensures protection against dust and water ingress
6.6-Foot (2 m) drop protection
IP67: Dustproof and waterproof
Conforms to CE requirements
US Patent 10,073,142, D750,985 and other patents pending

Klein Tools VDV770-834 VDV Commander Test-n-Map Remote Kit

Klein Tools VDV770-834 VDV Commander Test-n-Map Remote Kit

Free shipping!

Klein Tools VDV770-834 feature list:

Maximize your VDV Commander™ with single-step Test-n-Map™ Remotes*
Test, map and identify a location in one step
Cuts testing and identification time in half
Test and identify up to 8 locations at once with tester*
Kit includes:
– 7 Test-n-Map Remotes (#2 – #8)
– 8 coaxial push-on F-adapters
– 8 RJ45 jumper test cables
– 2 universal RJ11/RJ12 jumper cables
– 1 Test-n-Map remote verification test cable
– 1 padded Cordura® zipper bag

*Requires Klein Commander, Scout™ Pro LT or Scout Pro 2 Tester – sold separately

FLIR CM57 3000A 18″ Flexible Clamp Meter

FLIR CM57 3000A 18″ Flexible Clamp Meter with LCD and Bluetooth

Free shipping!

The FLIR CM57 Flexible Clamp Meter with Bluetooth is an ergonomic tool designed to simplify difficult current measurements. Made with a narrow flexible coil clamp, the CM57 lets you easily take measurements in tight or awkward spots.

True RMS AC Current up to 3,000 Amps for
multiple conductor measurements.
Inrush current function for equipment start-up spikes.
Bright, dual LED worklights provide built-in illumination for dark cabinets.
Drop tested to 3 meters, portable, lightweight, and tangle-free without compromising measurement range.
Connect to iOS and Android smartphones or tablets.
Data recording for trend analysis transferable via Bluetooth.
Multiple units wirelessly connect for remote viewing
of multiphase systems.

Extech TL809 Electronic Test Lead Kit

Extech TL809 Electronic Test Lead Kit

8-piece test lead kit ideal for the testing of digital circuitry

Two 42″ (1m) PVC lead extensions with shrouded banana plugs at both ends.
Two modular 4″ (102mm) Heavy Duty test probe handles with 0.16″ (4mm) banana plug tip, CAT III-1000V rating, UL listed.
Two plunger mini-hooks.
Two alligator clips with removable insulators.
Includes 3-compartment sealable nylon pouch to organize/protect your test leads.

Extech ET10 GFCI Receptacle Tester

Extech ET10 GFCI Receptacle Tester

Tests GFCI circuits and for faulty wiring in 3-wire receptacles.
Color coded lights quickly indicate specific circuit condition.
3 prong plug

FLIR VP50 Non-Contact Voltage Detector

FLIR VP50 Non-Contact Voltage Detector

The FLIR VP50 is a tough, CAT IV-rated Non-Contact Voltage Detector featuring a combination of alerts – tactile vibration and red LED alarms, a powerful LED flashlight, and versatile voltage sensitivities. We engineered the FLIR VP50 to reliably detect voltages on the latest tamperproof outlets and electrical systems installed using modern construction methods.

Low-profile probe tip gets the sensor closer to electrical sources.
Enhanced sensitivity to help detect voltage in the latest safety outlets.
Detect voltage in electrical systems in large industrial facilities, residential
low voltage installations, and systems located behind obstructions (using
High Sensitivity mode).
Drop tested up to 3 meters.
Multiple LED indicators plus worklight.

Fluke A3002FC Fluke Connect™ Wireless AC/DC Current Module

Fluke A3002 FC Wireless AC/DC Current Module

Fluke A3002FC Fluke Connect™ Wireless AC/DC Current Module

FREE UPS GROUND SHIPPING

The Fluke A3002FC Fluke Connect™ Wireless AC/DC Current Module wirelessly relays measurements from current clamp accessories to other Fluke Connect™ enabled master units.

The Fluke A3002FC Fluke Connect™ Wireless AC/DC Current Module is designed to be used with the i410 or i1010 AC/DC current clamps (not included with module). The a3002FC AC/DC current module wirelessly relays measurements to other Fluke Connect™ enabled master units, listed below:

Fluke 3000 FC DMM
Fluke Ti200/300/400 Thermal Camera
PC via optional pc3000 FC Adapter
Fluke Connect Mobile app

The Fluke a3002 FC main features include:

Measure up to 400 A AC or 400 A DC with i410 (sold separately)
Measure up to 600 A AC or 1000 A DC with i1010 (sold separately)
Use as a standalone meter or as part of the system
Logging function for recording and saving up to 65,000 readings
Includes:
- True-RMS AC/DC Current Module
- Magnetic hanging strap

Fluke A3001 FC Wireless iFlex® AC Current Module

Fluke A3001 FC Wireless iFlex^® AC Current Module

FREE UPS GROUND SHIPPING

See it. Save it. Share it.

All the facts, right in the field. The Fluke A3001 FC Wireless iFlex® AC Current Module is one member of a family of wireless test tools that let you share test data using the Fluke Connect™ app with ShareLive™ video call.

Fluke Connect Wireless Test Tools put tools, not your body, near live electrical panels. It’s simple. Connect the a3001 FC current module, or any of the other Fluke Connect remote modules, and read the results on the Fluke Connect Wireless Multimeter or a portable PC from a safe distance.

Better still, the Fluke Connect test tools can send measurement data to your smartphone, so you can save and share measurements from the field with your team anytime, from anywhere.

Fluke 3000 FC DMM
Fluke Ti200/300/400 Thermal Camera
PC via optional pc3000 FC Adapter
Fluke Connect Mobile app

The iFlex® Wireless Current Module allows you to measure around awkward sized conductors or get into tight spaces and makes wire access easier:

Measure up to 2500 A AC
Use as a standalone meter or as part of the system
Logging function for recording and saving up to 65,000 readings
Inrush function
Magnetic hanging strap

A3001 FC Quick Reference Guide

Fluke LVD2 Volt Light Tester

Fluke LVD2 Volt Light

Non-contact AC voltage detector and LED flashlight combined into one easy to use pen-style design. The LVD2 is a CAT IV 600 V rated non-contact detector that is suitable for commercial and industrial applications. The LVD2 includes dual sensitivity turning blue 1 to 5 (2.54 cm to 12.7 cm) from the source and red when at the source.

Ultra-Bright White LED with 100,000 hour life
Detects from 90 to 600 V AC
Rated to CAT IV 600 V
Dual Levels of Detection
Blue indicates proximity to AC Voltage source
Red indicates you’re at the source
Operating temperature 0 deg C to 50 deg C

Fluke T+ Electrical Tester

Fluke T Electrical Tester

The Fluke T Electrical Tester has all the advantages of traditional solenoid testers, with none of the typical solenoid tester drawbacks. The T uses all 3 voltage detection methods – light, sound and vibration, to work more efficiently in noisy environments, dimly lit areas, or tight spaces. Built-in flashlight, GFCI trip capability, and the legendary ruggedness you expect from Fluke, make the T an excellent choice for most industrial, commercial, and residential applications.

- CAT IV 600 V, CAT III 1000 V rated
- AC/DC Voltage: 12 V – 600 V on LED bar
- Continuity beeper
- Detects live voltage even when the batteries are dead
- GFCI Trip
- Bright LED flashlight for work in poorly lit areas
- On/Off switchable beeper, selectable according to your environment
- Replaceable test probes for added flexibility and convenience
- Hazardous voltage warning light for added user protection
- Test lead strap included for better test lead management
- Auto off mode to conserve battery life
- 2-year warranty

Fluke 789 ProcessMeter

FREE UPS GROUND SHIPPING

Now compatible with Fluke Connect™ App

The Fluke 789 ProcessMeter is the ultimate troubleshooting tool for electricians and instrumentation professionals, combining the functionality of a loop calibrator with the power of a digital multimeter. By equipping the 789 with a temperature measurement module and the wireless data logging capabilities of Fluke Connect™ with ShareLive™ video call (sold separately), process technicians can now do a lot more while carrying a lot less. And with its built-in, selectable 250 ohm HART® resistor, it eliminates the need to carry a separate resistor with you.

4 V Loop power supply
Very large dual display
Enhanced backlight with 2 brightness settings
1200 Ohm drive capability on mA source
HART mode setting with loop power and a built-in 250 ohm resistor
0% and 100 % buttons to toggle between 4 and 20 mA sourcing for a quick span check
Infrared-port to process data in FlukeView Forms (V2.1) software
Precision 1000 V, 440 mA True-RMS digital Multimeter
0.1% dc voltage accuracy
0.05% dc current accuracy
Frequency measurement to 20 kHz
Min/Max/Average/Hold/Relative modes
Diode Test and Continuity Beeper
Simultaneous mA and % of scale readout
20 mA DC current source / loop calibrator / simulator
Manual Step (100%, 25%, Coarse, Fine) plus Auto Step and Auto Ramp
Externally accessible battery for easy battery changes