Fluke 302+ CAT III Digital Clamp Meter

The Fluke 302+ is a compact, easy-to-use digital clamp meter made to fit the way you work. It is the perfect first-pass troubleshooting tool: small enough to fit in a work bag, tough enough to withstand daily use, and extremely simple to use. All without compromising safety. For everyday applications, where True-RMS accuracy isn’t needed, the Fluke 302+ delivers reliable measurements time after time.

Fluke 302+ Additional Features

The Fluke 302+ CAT III Digital Clamp Meter is more compact, making the use of clamp-type ammeter more flexible and simpler
Measure AC current up to 400A
30 mm large jaw
High accuracy of 1.8%
Backlit display
Two-year warranty

Fluke 302+ Comes with Fluke TL75 Hard Point™ Test Lead Set

One pair (red, black) of comfort grip probes
48 inches (1.22 meter) PVC insulated test leads with right-angle shrouded banana plugs
Recommended for general purpose measurements
CAT II 1000 V, 10 A rating
CAT IV 600 V, CAT III 1000 V only with protective cap

Fluke 302+ Safety Features

Meets CAT IV 300V/CAT ||| 600V safety rating

Key features

AC current measurements up to 400 A, handling your everyday electrical maintenance needs
Comes with the TL75 Hard Point™ Test Lead Set offering the convenience of a test lead and probe in one unit with a variety of connections
Rugged, easy-to-use digital clamp meter with CAT IV 300 V/CAT III 600 V safety rating

Technical Specifications
AC current	Range	400.0 A
	Accuracy	1.8% ±5
AC voltage	Range	400/600
	Accuracy	1.5% ±5
DC voltage	Range	400/600
	Accuracy	1.5% ±5
DC mV range		–
Resistance	Range	4000 Ω
	Accuracy	1% ±5
Continuity		≤ 70 Ω
Backlight display		Yes
Data hold		Yes
Size	H x W x D (mm)	208 x 58.5 x 28
	Jaw size	30 mm
Safety rating		CAT III 600 V
Temperature		0 ~ 40 °C
Screen refresh rate		> 2 times / sec.
Test leads		TL75
Battery		2 AAA batteries
Warranty		2 years

Includes:

Fluke 302+ CAT III Digital Clamp Meter
Fluke TL75 Hard Point™ Test Lead Set
2 AAA batteries (installed)
2-year warranty

Fluke 376 FC True-RMS AC/DC Clamp Meter with iFlex

Fluke 376 FC True-RMS AC/DC Clamp Meter with iFlex

FREE UPS GROUND SHIPPING

You can measure around awkward sized conductors with the Fluke 376 FC True RMS Clamp Meter with iFlex^®, expanding your measurement range to 2500 A ac. With True RMS voltage and current measurements, the Fluke 376 can read up to 1000 V and 1000 A in both ac and dc modes.

The Fluke 376 FC is the direct replacement for the Fluke 376 Clamp Meter.

Features:

Log and trend measurements to pinpoint intermittent faults.
Transmit results wirelessly via Fluke Connect^® Measurements app.
Create and send reports right from the field.
Stay safely away from the arc flash zone through Bluetooth connectivity to Apple and Android devices.
Connect your meter to your smartphone with Fluke Connect Measurements.
Read measurements on your phone at a safe distance, wearing less PPE while your meter takes all the risks.
Record results directly to your phone and the Cloud.
Capture intermittent faults while performing other tasks using the logging capabilities of the Fluke 376 FC.
Create and share reports from the field via email, or converse in real-time with ShareLive™ video calls.
iFlex flexible current probe expands the measurement range to 2500 A ac; provides access to large conductors in tight spaces (included).
TPAK magnetic hanging strap (included).
Integrated VFD low pass filter for accurate motor drive measurements.
Proprietary inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it.
CAT IV 600 V, CAT III 1000 V safety rating.
Three-year warranty.
Soft carrying case.

374 FC/375 FC/376 FC Users Manual

Klein Tools CL800 Digital Clamp Meter, AC Auto-Range TRMS, Low Impedance (LoZ), Auto Off

Klein Tools CL800 Electrical Tester is an automatically ranging true root mean squared (TRMS) digital clamp meter that measures AC/DC voltage, resistance, continuity, frequency, capacitance, and tests diodes via test-leads, and temperature via a thermocouple probe. It also features a Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages. Klein Tools’ Test and Measurement product line was exclusively designed from the ground up by electricians for electricians. Years of field research, combined with extensive input from electricians across America, inspired the development of meters and electrical testers loaded with innovative, time-saving features.

Clamp Meter with automatically ranging true mean squared (TRMS) technology for increased accuracy
Test leads measure AC/DC voltage, resistance, continuity, frequency and capacitance and tests diodes
Thermocouple probe measures temperature
Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages
CAT IV 600V, CAT III 1000V, Class 2, Double insulation safety rating
Built to withstand a 6.6-Foot (2m) drop
Low battery indicator and easily accessible battery compartment
Operating temp: 32-degree F to 104-degree F (0-degree C to 40-degree C)
Operating altitude to 6562-Foot (2000m)
Includes carrying pouch, test leads, thermocouple with adapter and batteries

Klein Tools CL700 Digital Clamp Meter, AC Auto-Ranging TRMS, Low Impedance (LoZ) Mode

Klein Tools CL700 Electrical Tester is an automatically ranging true root mean squared (TRMS) digital clamp meter that measures AC current via the clamp, and measures AC/DC voltage, resistance, continuity, frequency, capacitance, and tests diodes via test-leads, and temperature via a thermocouple probe. It also features a Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages. Klein Tools’ Test and Measurement product line was exclusively designed from the ground up by electricians for electricians. Years of field research, combined with extensive input from electricians across America, inspired the development of meters loaded with innovative, time-saving features.

Clamp Meter with automatically ranging true mean squared (TRMS) technology for increased accuracy
Electronic Tester’s clamp measures AC current and its thermocouple probe measures temperature
Test leads measure AC/DC voltage, resistance, continuity, frequency and capacitance and tests diodes
Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages
CAT IV 600V, CAT III 1000V, Class 2, Double insulation safety rating
Built to withstand a 6.6-Foot (2 m) drop
Low battery indicator and easily accessible battery compartment
Includes a carrying pouch, test leads, thermocouple with adapter and batteries
Meets requirements for use in basic and controlled electromagnetic environments like residential, office and light-industrial locations
Operating Temperature: 32-degrees F to 104-degrees F (0-degrees C to 40-degrees C)

Klein Tools CL900 Digital Clamp Meter, AC Auto-Range TRMS, Low Impedance (LoZ), 2000 Amp

The CL900 Electrical Tester is an auto-ranging, true root mean square (TRMS) digital clamp meter. It measures AC/DC current via the clamp and measures AC/DC voltage, resistance, continuity, frequency, duty-cycle, capacitance, and tests diodes via test-leads. It features a Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages, and has a dedicated mode for capturing Inrush Current.

Digital Clamp Meter measures 2000A AC/DC, 1000V AC/DC, 60 Milliohm
Rugged Klein TOUGH METER industrial design stands up to jobsite demands; built to withstand a 6.6-Foot (2m) drop
Automatically ranging True Root Mean Squared (TRMS) measurement technology for accuracy
CAT IV 600V, CAT III 1000V, Class 2, double insulation safety rating
Backlit display for clear visibility in environments with low ambient lighting
Dedicated mode for capturing Inrush Current
Non-contact voltage tester integrated into the clamp
Low impedance (LoZ) mode for identifying and eliminating ghost or stray voltages
Audible continuity, capacitance, diode test, frequency and duty cycle, min/max feature, data hold capability
Test leads measure AC/DC voltage, resistance, continuity, frequency, duty-cycle, capacitance and diodes

Klein Tools CL600 Digital Clamp Meter, True RMS, AC Auto-Ranging, 600 Amps

Klein Tools CL600 Electrical Tester is an automatically ranging true mean squared (TRMS) digital clamp meter measures AC current via the clamp, and measures AC/DC voltage, resistance, continuity, and tests diodes via test-leads. Exclusively designed from the ground up by electricians for electricians. Years of field research, combined with extensive input from electricians across America, inspired the development of meters loaded with innovative, time-saving features.

Clamp Meter with automatically ranging true mean squared (TRMS) technology for increased accuracy
Amp Clamp measures AC current
Test leads measure AC/DC voltage, resistance, continuity and tests diodes
CAT IV 600V, CAT III 1000V, Class 2, Double insulation safety rating
Built to withstand a 6.6-foot (2 m) drop
Low battery indicator and easily accessible battery compartment
Includes carrying pouch, test leads and batteries
Operating altitude to 6,562-Foot (2,000 m)
Meets requirements for use in basic and controlled electromagnetic environments like residential, office and light-industrial locations

Klein Tools CL390 AC/DC Digital Clamp Meter, Auto-Ranging 400 Amp

Klein Tools CL390 is an automatically ranging true root mean squared (TRMS) digital clamp meter. It measures AC/DC current and NCVT via the clamp, AC/DC voltage, DC microamps, resistance, continuity, frequency, capacitance, and diodes via test leads, and temperature via a thermocouple probe. It features a high visibility, reverse contrast LCD display that optimizes view ability both in dark or bright ambient lighting.

Test lead holder on side of clamp and optional magnetic hanger for meter (Cat. Nos. 69445 or 69417) for hands free operation
Non-contact voltage tester integrated into the clamp jaw
High-visibility reverse contrast LCD display for improved view ability in all ambient lighting conditions
Automatically ranging True Root Mean Squared (TRMS) measurement technology for accuracy
Measures AC/DC current and NCVT via clamp and AC/DC voltage, resistance, frequency, DC microamps, capacitance, duty cycle, diode test, and continuity via test-leads, and temperature with thermocouple
Measures temperature with a K-Type thermocouple probe
Max/Min, Rel/Zero and Data Hold capability
Auto-power off after 10 minutes to conserve battery life
Includes a carrying case, test leads with CAT III/CAT IV safety caps, thermocouple, instructions, and 3 x AAA batteries
Low battery indicator and easily accessible battery compartment

FLIR CM57 3000A 18″ Flexible Clamp Meter

FLIR CM57 3000A 18″ Flexible Clamp Meter with LCD and Bluetooth

Free shipping!

The FLIR CM57 Flexible Clamp Meter with Bluetooth is an ergonomic tool designed to simplify difficult current measurements. Made with a narrow flexible coil clamp, the CM57 lets you easily take measurements in tight or awkward spots.

True RMS AC Current up to 3,000 Amps for
multiple conductor measurements.
Inrush current function for equipment start-up spikes.
Bright, dual LED worklights provide built-in illumination for dark cabinets.
Drop tested to 3 meters, portable, lightweight, and tangle-free without compromising measurement range.
Connect to iOS and Android smartphones or tablets.
Data recording for trend analysis transferable via Bluetooth.
Multiple units wirelessly connect for remote viewing
of multiphase systems.

FLIR Systems CM83 600A Clamp Meter

FLIR Systems CM83 600A Clamp Meter

Free shipping!

TRMS Voltage and Current, Power Factor, Bright White LED Backlit Display, Analog Bargraph, Integrated Non-Contact Voltage Detector, Min/Max/Average, Auto Power Off, Data Hold, Peak Hold, Relative, DCA Zero, and Battery Status.

FLIR Tools Mobile connects the FLIR CM83 to compatible smartphones
and tablets via Bluetooth® for remote viewing and sharing
METERLiNK® technology wirelessly embeds electrical
clamp meter readings into radiometric infrared images
captured with compatible FLIR Thermal Cameras
VFD Mode provides superior accuracy for
working on VFD-controlled equipment
Advanced power efficiency and harmonics measurements
for system level performance analysis
Inrush mode captures fast AC Current spikes during appliance start-up
Phase Rotation testing ensures the motor and power source are aligned
True RMS DMM functionality features reliable
performance and expansive ranges
Powerful LED lamps not only assist with clamping but
are bright enough to serve as a primary work lights

FLIR CM78 1000A Clamp Meter with IR Thermometer

FLIR CM78 1000A Clamp Meter with IR Thermometer

Free shipping!

The FLIR CM78 is a True RMS Industrial Grade 1000A
Clamp Meter for the electrician who needs a safe, capable
combination tool.

Voltage and Current, Min, Max, Average, Auto Power Off,
Data Hold, Relative, Peak Hold, Battery Status Indicator,
Bright White LED Backlight
Integrated IR Thermometer provides fast non-contact
measurements on panels, conduits, and motors.
Powerful Worklights not only assist with clamping but
are bright enough to serve as a primary worklight.
FLIR Tools Mobile connects the FLIR CM78 to your
compatible smartphones and tablets via Bluetooth.
METERLiNK® technology wirelessly integrates electrical
readings on your infrared image with FLIR Thermal
Cameras.

Fluke 381 Remote Display True RMS AC/DC Clamp Meter with iFlex®

Fluke 381 Remote Display True RMS AC/DC Clamp Meter

FREE UPS GROUND SHIPPING

Be ready for anything.

Fluke 381 Remote Display True-rms AC/DC Clamp Meter with iFlex : The Fluke 381 is the first clamp meter with a detachable, remote display and iFlexTM flexible current probe for easier, faster, safer measurements. Be ready for anything. The new Fluke 381 does everything you would expect from a clamp meter, and then lets you remove the display for even more flexibility. Now one technician can do jobs that used to require two people. Clamp the Fluke 381 around a conductor, remove the display and walk across the room to operate controls or remove protective equipment, all while watching real-time readings. The new iFlex flexible current probe (included) expands the measurement range to 2500 A ac while providing increased display flexibility, ability to measure awkward sized conductors and improved wire access.

Wireless technology allows the display to be carried up to 30 ft. away from the point of measurement for added flexibility without interference with measurement accuracy
The removable magnetic display can be conveniently mounted where it is easily seen
iFlex flexible current probe expands the measurement range to 2500 A acCAT IV 600 V, CAT III 1000 V
Integrated low pass filter and state of the art signal processing allows for use in noisy electrical environments while providing stable readings
Proprietary inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it
Ergonomic design fits in your hand and can be used while wearing protective equipment
Radio transmitter automatically sets the correct measurement range so you do not need to change the switch positions while taking a measurement
Three-year warranty

Soft carrying case
Safety Conformance IEC/EN 61010-1:2001, 1000V CAT III, 600V CAT IV

Specifications
Diameter of measurable conductor	1.3” or 34 mm max
Operating temperature	-14 to 122ºF (-10 to 50ºC)
Storage temperature	-40 to 140ºF (-40 to 60ºC)
Operating humidity	< 90% @ 10 to 30 ºC, < 75% @ 30 to 40ºC
Operating altitude	0 to 2000 m
Size	277 x 88 x 43 mm, (10.905 x 3.464 x 1.629 in.)
Weight	350g, (12 oz.)
Temperature coefficient	0.01% ºC (< 18ºC or > 28ºC)
Warranty	Three years for electronics One year for cable and clamp assembly

381 Data Sheet

Fluke 375 FC True-rms AC/DC Clamp Meter

Fluke 375 FC True-rms AC/DC Clamp Meter

FREE UPS GROUND SHIPPING

With true-rms ac voltage and current measurements, the Fluke 375 FC 600A True-rms AC/DC Clamp Meter can read up to 600 V and 600 A in both ac and dc modes, and is capable of frequency measurement up to 500 Hz. Additionally, the 375 FC is compatible with the new iFlex flexible current probe (sold separately), which expands the measurement range to 2500 A ac.

The 375 FC directly replaces the Fluke 375.

Features:

Log and trend measurements to pinpoint intermittent faults.
Transmit results wirelessly via Fluke Connect Measurements app.
Create and send reports right from the field.
Stay safely away from the arc flash zone through Bluetooth connectivity to Apple and Android device.
Read measurements on your phone at a safe distance, wearing less PPE while your meter takes all the risks
Record results directly to your phone and the Cloud
Capture intermittent faults while performing other tasks using the logging capabilities of the Fluke 375 FC
Create and share reports from the field via email, or converse in real-time with ShareLive™ video calls
Compatible with iFlex flexible current probe; use to expand the measurement range to 2500 A ac; provides access to large conductors in tight spaces
Compatible with TPAK magnetic hanging strap
Integrated VFD low pass filter for accurate motor drive measurements
Proprietary inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it
CAT IV 600 V, CAT III 1000 V safety rating
Three-year manufacturer warranty
Soft carrying case included

374 FC/375 FC/376 FC Users Manual

Fluke 374 FC True-rms AC/DC Clamp Meter

Fluke 374 FC True-rms AC/DC Clamp Meter

FREE UPS GROUND SHIPPING

The Fluke 374 FC AC/DC Clamp Meter offers advanced troubleshooting performance and is now part of the Fluke Connect family of wireless test tools.

The Fluke 374 FC directly replaces the Fluke 374 Clamp Meter.

Features:

Trend measurements and pinpoint intermittent faults by connecting your meter to your phone via Fluke Connect® Measurements app.
Transmit results wirelessly via Fluke Connect® Measurements app
Create and send reports right from the field
Stay safely away from the arc flash zone through Bluetooth connectivity to Apple and Android devices
Connect your meter to your smartphone with Fluke Connect Measurements.
Read measurements on your phone at a safe distance, wearing less PPE while your meter takes all the risks.
Record results directly to your phone and the Cloud.
Create and share reports from the field via email, or converse in real-time with ShareLive™ video calls.
Compatible with iFlex flexible current probe; use to expand the measurement range to 2500 A ac; provides access to large conductors in tight spaces.
Compatible with TPAK magnetic hanging strap.
Proprietary inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it.
CAT IV 600 V, CAT III 1000 V safety rating.
Three-year manufacturer warranty.
Soft carrying case.

374 FC/375 FC/376 FC Users Manual

Fluke 365 Detachable Jaw True-rms AC/DC Clamp Meter

FREE UPS GROUND SHIPPING

The Fluke 365 is a rugged meter perfect for jobs where access to wires is difficult. The 365’s thin, small jaw is detachable with a flexible lead, which makes gaining access to wires and viewing the display easier than ever.
Safety Conformance
IEC/EN 61010-1:2001, 600V CAT III

200 A ac and dc current measurement with detachable jaw
600 V ac and dc voltage measurement
Detachable jaw makes accessing wires and viewing the display easier
Built in flashlight/torch allows for easy illumination and identification of wires
CAT III 600 V
Compact design fits in your hand and can be used while wearing protective equipment
State of the art signal processing allows for use in noisy electrical environments while providing stable readings
Large, easy to read, backlight display automatically sets the correct measurement range so you do not need to change switch positions while taking a measurement
Three-year warranty
Soft carrying case

Be ready for anything.

Safety Conformance
IEC/EN 61010-1:2001, 600V CAT III

en61010-1-600cat3_xx

Fluke 771 Milliamp Process Clamp Meter

FREE UPS GROUND SHIPPING

Measure 4-20 mA signals without breaking the loop with this new, compact clamp meter for PLC and control systems analog I/O. The detachable clamp with extension cable allows you to take measurements in tight locations, and the built-in spot light illuminates hard to see wires in dark enclosures.

Measure mA signal for PLC and control system analog I/O
Count on best in class accuracy of 0.2%
Measure mA signals with 0.01mA resolution
Three year warranty for electronics, one year for clamp cable assembly