Fluke 115 True-RMS Multimeter

FREE UPS GROUND SHIPPING

With its simple operation, compact design and ease of use, the Fluke 115 True RMS digital multimeter provides the perfect answer for general purpose electrical and electronic test requirements. The Fluke 115 displays True RMS voltage and current readings with 600 count resolution, continuity and capacitance, making it perfect for quick verifications and field service use. Fluke 115 Digital Multimeters are independently tested for safe use in CAT III 600V Environments.

Large white LED backlight to work in poorly lit areas
Resistance and continuity
Frequency and capacitance
Maximum Voltage ac/dc 600V
10A ac/dc current measurement (20 A overload for 30-seconds max)
Min/Max/Average to record signal fluctuations
CAT III 600 V safety rated

Safety conformance

All inputs are protected to CE, IEN61010-1 CAT III 600V. UL, CSA, TÜV listed and VDE.

Specifications
Maximum voltage between any terminal and earth ground	600 V
Surge protection	6 kV peak per IEC 61010-1 600 VCAT III, Pollution Degree 2
Display	Digital: 6,000 counts, updates 4 per second
Bar graph	33 segments, updates 32 per second
Operating temperature	-10 °C to 50 °C
Storage temperature	-40 °C to 60 °C
Battery type	9 volt Alkaline, NEDA 1604A/ IEC 6LR61
Batterylife	400 hours typical, without backlight
Accuracy Specifications
DC millivolts	Range/Resolution	600.0 mV / 0.1 mV
DC millivolts	Accuracy	± ([% of reading] [counts]): 0.5% 2
DC volts	Range/Resolution	6.000 V / 0.001 V 60.00 V / 0.01 V 600.00 V / 0.1 V
DC volts	Accuracy	± ([% of reading] [counts]): 0.5% 2
AC millivolts¹ True RMS	Range/Resolution	600.0 mV / 0.1 mV
AC millivolts¹ True RMS	Accuracy	1.0 % 3 (dc, 45 Hz to 500 Hz) 2.0 % 3 (500 Hz to 1 kHz)
AC volts¹ True RMS	Range/Resolution	6.000 V / 0.001 V 60.00 V / 0.01 V 600.0 V / 0.1 V
AC volts¹ True RMS	Accuracy	1.0 % 3 (dc, 45 Hz to 500 Hz) 2.0 % 3 (500 Hz to 1 kHz)
Continuity	Range/Resolution	600 Ω / 1 Ω
Continuity	Accuracy	Beeper on < 20 Ω, off > 250 Ω; detects opens or shorts of 500 μs or longer.
Ohms	Range/Resolution	600.0 Ω / 0.1 Ω 6.000 kΩ / 0.001 kΩ 60.00 kΩ / 0.01 kΩ 600.0 kΩ / 0.1 kΩ 6.000 MΩ / 0.001 MΩ
	Accuracy	0.9 % 1
	Range/Resolution	40.00 MΩ / 0.01 MΩ
	Accuracy	5 % 2
Diode test	Range/Resolution	2.00 V / 0.001 V
Diode test	Accuracy	0.9% 2
Capacitance	Range/Resolution	1000 nF / 1 nF 10.00 μF / 0.01 μF 100.0 μF / 0.1 μF 9999 μF / 1 μF 100 μF to 1000 μF
	Accuracy	1.9% 2
	Range/Resolution	> 1000 μF
	Accuracy	5% 20%
Lo-Z capacitance	Range	1 nF to 500 μF
Lo-Z capacitance	Accuracy	10% 2 typical
AC amps True RMS (45 Hz to 500Hz)	Range/Resolution	6.000 A / 0.001 A 10.00 A / 0.01 A
AC amps True RMS (45 Hz to 500Hz)	Accuracy	1.5% 3 20 A overload for 30-seconds max
DC amps	Range/Resolution	6.000 A / 0.001 A 10.00 A / 0.01 A
DC amps	Accuracy	1.0% 3 20 A overload for 30-seconds max
Hz (V or A input)²	Range/Resolution	99.99 Hz / 0.01 Hz 999.9 Hz / 0.01 Hz 9.999 kHz / 0.001 kHz 50 kHz / 0.01 kHz
Hz (V or A input)²	Accuracy	0.1% 2
Notes: ¹ All AC voltage ranges except Auto-V/LoZ are specified from 1 % to 100 % of range. Auto-V/LoZ is specified from 0.0 V. ² Frequency is AC coupled, 5Hz to 30 kHz for AC voltage. • Temperature uncertainty (accuracy) does not include the error of the thermocouple probe. • Frequency is AC coupled, 5 Hz to 50 kHz for AC voltage. Frequency is DC coupled, 45 Hz to 5 kHz for AC current. • Temperature Range/Resolution: -40 °F to 752 °F / 0.2 °F.
Mechanical & General Specifications
Size	167 x 84 x 46 mm (6.57″ x 3.31″ x 1.82″)
Weight	550 g
Warranty	3 years

Fluke 116 HVAC Multimeter

Fluke 116 HVAC Multimeter

FREE UPS GROUND SHIPPING

The Fluke 116 digital multimeter delivers the capabilities professionals demand to troubleshoot and repair HVAC (heating, ventilation and air conditioning) systems. It has everything you need in an HVAC meter, including temperature and microamp measurements to help you quickly troubleshoot problems with HVAC equipment and flame sensors.

The Fluke 116 comes with the Fluke 80BK-A integrated DMM temperature probe. The microamp function allows flame sensor measurement down to 0.1 microamps. The AutoV/LoZ function prevents false readings caused by ghost voltage. The Fluke 116 also has a large white LED backlight for work in poorly lit areas. It measures resistance, continuity, frequency, and capacitance and provides Min/Max/Average readings with elapsed time to record signal fluctuations.

Fluke 116 multimeters are independently tested for safe use in CAT III 600V environments.

Built-in thermometer for HVAC applications
Microamps to test flame sensors
Low input impedance: helps prevent false readings due to ghost voltage
Large white LED backlight to work in poorly lit areas
Resistance, continuity, frequency and capacitance
Min/Max/Average with elapsed time to record signal fluctuations
Compact ergonomic design for one-handed operation
Compatible with optional magnetic hanger (ToolPak™)
CAT III 600 V safety rated

Fluke 117 True-RMS Multimeter

FREE UPS GROUND SHIPPING

The compact Fluke 117 true RMS digital multimeter is optimized to help you keep commercial buildings, hospitals and schools running right.

The advanced features of the Fluke 117 help you get the job done, quickly and safely. Integrated non-contact voltage detection helps you identify energized circuits. The AutoV/LoZ function prevents false readings caused by ghost voltage. The Fluke 117 delivers true-rms ac voltage and current readings with 6000-count resolution. It provides Min/Max/Average readings and measures frequency and capacitance. The battery door is easy to access, so you and your Fluke 117 can stay on the job.

Fluke 117 multimeters are independently tested for safe use in CAT III 600V environments.

- VoltAlert™ technology for non-contact voltage detection
- AutoVolt automatic ac/dc voltage selection
- Low input impedance: helps prevent false readings due to ghost voltage
- Large white LED backlight to work in poorly lit areas
- True-rms for accurate measurements on non-linear loads
- Measures 10 A (20 A overload for 30-seconds)
- Resistance, continuity, frequency and capacitance
- Min/Max/Average with elapsed time to record signal fluctuations
- Compact ergonomic design for one-handed operation
- Compatible with optional magnetic hanger (ToolPak™) for hands free operation
- CAT III 600 V safety rated
AutoVolt/LoZ
VoltAlert

Case: C90

Fluke 125B 40MHz Scopemeter

Fluke 125B 40MHz Scopemeter

FREE UPS GROUND SHIPPING

The Fluke 125B 40MHz Scopemeter: All the power of the 120-Series plus Industrial Bus Health Test capabilities and advanced power measurements on top.

The compact Fluke 125B 40MHz Scopemeter is the rugged solution for industrial troubleshooting and installation applications. Based on the Fluke 120 series, the 125 has all the capabilities of the 124 ScopeMeter extended with the capability to measure and analyze the signal quality on the common industrial buses.

The Fluke 125 ScopeMeter combines a 40MHz dual input digital storage oscillo-scope, two true-RMS digital multimeters and a dual input TrendPlot recorder all in a compact, battery powered instrument. Leave all other test tools behind, the Fluke 125 ScopeMeter is the only tool you’ll need.

Dual-input 40 MHz digital oscilloscope
Two 5,000 counts true-RMS digital multimeters
A dual-input TrendPlot recorder
Shielded test leads for oscilloscope, resistance and continuity measurements
10:1 Voltage Probe included for high frequency measurements
600 V CAT III safety certified
Up to 7 hours battery operation
Optically-isolated interface for PC connection
3 year warranty on main instrument, 1 year on accessories

SOFTWARE NOT INCLUDED

125 Getting Started

Fluke 177 True RMS Digital Multimeter

FREE UPS GROUND SHIPPING

Electrician’s Dream!

With its precision, reliability and ease of use, the Fluke 177 True RMS Digital Multimeter is the preferred solution for professional technicians worldwide. Independently tested for safe use in CAT IV 600 V/ CAT III 1000 V environments, the Fluke 177 is the industry standard with all the features you need to troubleshoot and repair many problems in electrical and electronic systems.

The Fluke 177 Digital Multimeter gives you True-rms voltage and current measurements, 6000-count resolution, manual and automatic ranging and provide frequency, capacitance, resistance, continuity and diode measurements. In addition, the Fluke 177 provides higher 0.09% basic accuracy, a digital display with analog bar graph and backlight.

True RMS voltage and current measurements
0.09% basic accuracy
6000 count resolution
Digital display with analog bargraph and backlight
Manual and automatic ranging
Display Hold and Auto Hold
Frequency and capacitance measurements
Resistance, continuity and diode measurements
Min-max-average recording
Smoothing mode allows filtering of rapidly changing inputs
Easy battery exchange without opening the case
Closed case calibration through front panel
Ergonomic case with integrated protective holster
EN61010-1 CAT III 1000V / CAT IV 600V
Measures twice as fast as other multimeters

175, 177 & 179 Users Manual

Fluke 179 True RMS Digital Multimeter

FREE UPS GROUND SHIPPING

I Want No Other Meter in My Toolkit

With its precision, reliability, and ease of use, the Fluke 179 True RMS Digital Multimeter is the preferred solution for professional technicians around the world. With all the features you need to troubleshoot and repair in electrical and electronic systems, the Fluke 179 also offers a digital display with analog bar graph and built-in temperature measurements.

Works When You Need It, Where You Need It

You can trust the Fluke 179 to get the job done in all of the messy, loud, high energy and high places you work. Backed by a lifetime warranty, the Fluke 179 is independently tested for safe use in CAT IV 600 V/CAT III 1000 V environments.

The Fluke 179 – Just One of Fluke’s Trusted Tools

Fluke builds the most trusted tools in the world, and that means more than just the Fluke 179. If you work with the HVAC equipment, need a small meter for small spaces, or work in the electrical installer’s and repairman’s world, check out the full family of Fluke digital multimeters at Kiesub Electronics.

The Fluke 179 True RMS Digital Multimeter is the industry standard for troubleshooting and repair of electrical and electronic systems.

True RMS voltage and current measurements
0.09% basic accuracy
6000 count resolution
Digital display with analog bargraph and backlight
Manual and automatic ranging
Display Hold and Auto Hold
Frequency and capacitance measurements
Resistance, continuity and diode measurements
Temperature measurements
Min-max-average recording
Smoothing mode allows filtering of rapidly changing inputs
Easy battery exchange without opening the case
Closed case calibration through front panel
Ergonomic case with integrated protective holster
EN61010-1 CAT III 1000V / CAT IV 600V
Measures twice as fast as other multimeters

175, 177 & 179 Users Manual

Fluke 1AC II A1 VoltAlert Electrical Tester

The pocket-sized voltage detector

The next generation Fluke 1AC II A1 VoltAlert Electrical Tester non-contact voltage testers from Fluke are easy to use – just touch the tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, you know there’s voltage present. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits in the workplace or at home.

Voltbeat™ technology and continuous self-test – so you always know it’s working
Upon detection, tip glows and beeper sounds
CAT IV 1000 V for added protection
Expanded range: 90 V AC to 1000 V AC
20 V to 90 V AC control circuit model also available
Two-year warranty
Batteries included
On/Off Button
Audible/Silent

Fluke 3000 FC Series Wireless Multimeter

Fluke 3000 FC Series Wireless Multimeter

Built_with_fc_2line_2c (1)

FREE UPS GROUND SHIPPING

See it. Save it. Share it.

All the facts, right in the field. The Fluke 3000 FC True-RMS Wireless Multimeter with the Fluke Connect™ app and ShareLive™ video call.

With its precision, reliability and ease of use, the Fluke 3000 FC Wireless Multimeter is the ideal solution for professional technicians. Independently tested for safe use in CAT IV 600V/ CAT III 1000 V environments, the Fluke 3000 FC has all the features you need to troubleshoot and repair many problems in electrical and electronic systems.

The Fluke 3000 FC gives you true-RMS voltage and current measurements, 6000-count resolution, manual and automatic ranging and provide frequency, capacitance, resistance, continuity and diode measurements. In addition, the Fluke 3000 FC provides higher 0.09% basic accuracy, a digital display showing up to three secondary measurements from remote modules, and a bright white backlight.

The Fluke 3000 FC Series Wireless Multimeter with the Fluke Connect™ app has all the essentials for convenient test and measurement troubleshooting.

AC and DC voltage measurements to 1000V
AC and DC current with 0.01 mA resolution
Continuity, resistance, diode test, capacitance and frequency measurements
MIN/MAX Recording
CAT III 1000 V, Cat IV 600 V; IP54

Plus, the Fluke Connect wireless enabled modules measure AC, DC and AC DC voltage, AC and DC current, plus temperature, all of which display on the Fluke 3000 FC Series Wireless Multimeter. Choose a standard clamp or flexible clamp to measure AC current. Mix and match modules to suit your unique measurement needs. Read the primary measurement on the main display and up to three modules at any one time. Modules are available separately or as part of Fluke Connect kits.
View spec

Fluke 302+ CAT III Digital Clamp Meter

Fluke 302 CAT III Digital Clamp Meter

The Fluke 302 is a compact, easy-to-use digital clamp meter made to fit the way you work. It is the perfect first-pass troubleshooting tool: small enough to fit in a work bag, tough enough to withstand daily use, and extremely simple to use. All without compromising safety. For everyday applications, where True-RMS accuracy isn’t needed, the Fluke 302 delivers reliable measurements time after time.

Fluke 302 Additional Features

The Fluke 302 CAT III Digital Clamp Meter is more compact, making the use of clamp-type ammeter more flexible and simpler
Measure AC current up to 400A
30 mm large jaw
High accuracy of 1.8%
Backlit display
Two-year warranty

Fluke 302 Comes with Fluke TL75 Hard Point™ Test Lead Set

One pair (red, black) of comfort grip probes
48 inches (1.22 meter) PVC insulated test leads with right-angle shrouded banana plugs
Recommended for general purpose measurements
CAT II 1000 V, 10 A rating
CAT IV 600 V, CAT III 1000 V only with protective cap

Fluke 302 Safety Features

Meets CAT IV 300V/CAT ||| 600V safety rating

Key features

AC current measurements up to 400 A, handling your everyday electrical maintenance needs
Comes with the TL75 Hard Point™ Test Lead Set offering the convenience of a test lead and probe in one unit with a variety of connections
Rugged, easy-to-use digital clamp meter with CAT IV 300 V/CAT III 600 V safety rating

Technical Specifications
AC current	Range	400.0 A
	Accuracy	1.8% ±5
AC voltage	Range	400/600
	Accuracy	1.5% ±5
DC voltage	Range	400/600
	Accuracy	1.5% ±5
DC mV range		–
Resistance	Range	4000 Ω
	Accuracy	1% ±5
Continuity		≤ 70 Ω
Backlight display		Yes
Data hold		Yes
Size	H x W x D (mm)	208 x 58.5 x 28
	Jaw size	30 mm
Safety rating		CAT III 600 V
Temperature		0 ~ 40 °C
Screen refresh rate		> 2 times / sec.
Test leads		TL75
Battery		2 AAA batteries
Warranty		2 years

Includes:

Fluke 302 CAT III Digital Clamp Meter
Fluke TL75 Hard Point™ Test Lead Set
2 AAA batteries (installed)
2-year warranty

Fluke 374 FC True-rms AC/DC Clamp Meter

Fluke 374 FC True-rms AC/DC Clamp Meter

FREE UPS GROUND SHIPPING

The Fluke 374 FC AC/DC Clamp Meter offers advanced troubleshooting performance and is now part of the Fluke Connect family of wireless test tools.

The Fluke 374 FC directly replaces the Fluke 374 Clamp Meter.

Features:

Trend measurements and pinpoint intermittent faults by connecting your meter to your phone via Fluke Connect® Measurements app.
Transmit results wirelessly via Fluke Connect® Measurements app
Create and send reports right from the field
Stay safely away from the arc flash zone through Bluetooth connectivity to Apple and Android devices
Connect your meter to your smartphone with Fluke Connect Measurements.
Read measurements on your phone at a safe distance, wearing less PPE while your meter takes all the risks.
Record results directly to your phone and the Cloud.
Create and share reports from the field via email, or converse in real-time with ShareLive™ video calls.
Compatible with iFlex flexible current probe; use to expand the measurement range to 2500 A ac; provides access to large conductors in tight spaces.
Compatible with TPAK magnetic hanging strap.
Proprietary inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it.
CAT IV 600 V, CAT III 1000 V safety rating.
Three-year manufacturer warranty.
Soft carrying case.

374 FC/375 FC/376 FC Users Manual

Fluke 375 FC True-rms AC/DC Clamp Meter

Fluke 375 FC True-rms AC/DC Clamp Meter

FREE UPS GROUND SHIPPING

With true-rms ac voltage and current measurements, the Fluke 375 FC 600A True-rms AC/DC Clamp Meter can read up to 600 V and 600 A in both ac and dc modes, and is capable of frequency measurement up to 500 Hz. Additionally, the 375 FC is compatible with the new iFlex flexible current probe (sold separately), which expands the measurement range to 2500 A ac.

The 375 FC directly replaces the Fluke 375.

Features:

Log and trend measurements to pinpoint intermittent faults.
Transmit results wirelessly via Fluke Connect Measurements app.
Create and send reports right from the field.
Stay safely away from the arc flash zone through Bluetooth connectivity to Apple and Android device.
Read measurements on your phone at a safe distance, wearing less PPE while your meter takes all the risks
Record results directly to your phone and the Cloud
Capture intermittent faults while performing other tasks using the logging capabilities of the Fluke 375 FC
Create and share reports from the field via email, or converse in real-time with ShareLive™ video calls
Compatible with iFlex flexible current probe; use to expand the measurement range to 2500 A ac; provides access to large conductors in tight spaces
Compatible with TPAK magnetic hanging strap
Integrated VFD low pass filter for accurate motor drive measurements
Proprietary inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it
CAT IV 600 V, CAT III 1000 V safety rating
Three-year manufacturer warranty
Soft carrying case included

374 FC/375 FC/376 FC Users Manual

Fluke 376 FC True-RMS AC/DC Clamp Meter with iFlex

Fluke 376 FC True-RMS AC/DC Clamp Meter with iFlex

FREE UPS GROUND SHIPPING

You can measure around awkward sized conductors with the Fluke 376 FC True RMS Clamp Meter with iFlex^®, expanding your measurement range to 2500 A ac. With True RMS voltage and current measurements, the Fluke 376 can read up to 1000 V and 1000 A in both ac and dc modes.

The Fluke 376 FC is the direct replacement for the Fluke 376 Clamp Meter.

Features:

Log and trend measurements to pinpoint intermittent faults.
Transmit results wirelessly via Fluke Connect^® Measurements app.
Create and send reports right from the field.
Stay safely away from the arc flash zone through Bluetooth connectivity to Apple and Android devices.
Connect your meter to your smartphone with Fluke Connect Measurements.
Read measurements on your phone at a safe distance, wearing less PPE while your meter takes all the risks.
Record results directly to your phone and the Cloud.
Capture intermittent faults while performing other tasks using the logging capabilities of the Fluke 376 FC.
Create and share reports from the field via email, or converse in real-time with ShareLive™ video calls.
iFlex flexible current probe expands the measurement range to 2500 A ac; provides access to large conductors in tight spaces (included).
TPAK magnetic hanging strap (included).
Integrated VFD low pass filter for accurate motor drive measurements.
Proprietary inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it.
CAT IV 600 V, CAT III 1000 V safety rating.
Three-year warranty.
Soft carrying case.

374 FC/375 FC/376 FC Users Manual

Fluke 381 Remote Display True RMS AC/DC Clamp Meter with iFlex®

Fluke 381 Remote Display True RMS AC/DC Clamp Meter

FREE UPS GROUND SHIPPING

Be ready for anything.

Fluke 381 Remote Display True-rms AC/DC Clamp Meter with iFlex : The Fluke 381 is the first clamp meter with a detachable, remote display and iFlexTM flexible current probe for easier, faster, safer measurements. Be ready for anything. The new Fluke 381 does everything you would expect from a clamp meter, and then lets you remove the display for even more flexibility. Now one technician can do jobs that used to require two people. Clamp the Fluke 381 around a conductor, remove the display and walk across the room to operate controls or remove protective equipment, all while watching real-time readings. The new iFlex flexible current probe (included) expands the measurement range to 2500 A ac while providing increased display flexibility, ability to measure awkward sized conductors and improved wire access.

Wireless technology allows the display to be carried up to 30 ft. away from the point of measurement for added flexibility without interference with measurement accuracy
The removable magnetic display can be conveniently mounted where it is easily seen
iFlex flexible current probe expands the measurement range to 2500 A acCAT IV 600 V, CAT III 1000 V
Integrated low pass filter and state of the art signal processing allows for use in noisy electrical environments while providing stable readings
Proprietary inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it
Ergonomic design fits in your hand and can be used while wearing protective equipment
Radio transmitter automatically sets the correct measurement range so you do not need to change the switch positions while taking a measurement
Three-year warranty

Soft carrying case
Safety Conformance IEC/EN 61010-1:2001, 1000V CAT III, 600V CAT IV

Specifications
Diameter of measurable conductor	1.3” or 34 mm max
Operating temperature	-14 to 122ºF (-10 to 50ºC)
Storage temperature	-40 to 140ºF (-40 to 60ºC)
Operating humidity	< 90% @ 10 to 30 ºC, < 75% @ 30 to 40ºC
Operating altitude	0 to 2000 m
Size	277 x 88 x 43 mm, (10.905 x 3.464 x 1.629 in.)
Weight	350g, (12 oz.)
Temperature coefficient	0.01% ºC (< 18ºC or > 28ºC)
Warranty	Three years for electronics One year for cable and clamp assembly

381 Data Sheet

Fluke 62 MAX Infrared Thermometer

Small in size. Big on toughness.

Why IR Thermometers?

Temperature is often the first indication of potential problems in electrical and mechanical applications. But how can you easily determine if an electrical panel has a hot spot, a motor is overheating or an HVAC system is inefficient? The answer is with an infrared (IR) thermometer. With handheld, non-contact IR thermometers, you can instantly measure equipment temperatures in hard-to-reach or hazardous areas. And with early detection of abnormal temperatures comes early correction of problems.

Fluke 62 MAX and Fluke 62 MAX

Designed with your on-the-job needs in mind, the new Fluke 62 MAX Infrared Thermometer and 62 MAX infrared thermometers are everything you’d expect from the experts in measurement tools. Small in size, extremely accurate and very easy to use. IP54 rated for dust and water resistance. Precise yet rugged enough to take a 3-meter drop. In fact, the 62 MAX and 62 MAX are so tough, they’re the only IR thermometers around you can handle without care.

Single point offset laser sighting
Best accuracy in its class: 1% of reading
Holds temperature readings for 7 seconds
Dual displays shows current and MAX measurements simultaneously
Backlit display for poorly lit areas
Comfortable ergonomic handle with protective rubber boot for added durability
Fitted carrying case
Robust, award winning design
Wide temperature range from -30º to 500ºC (–20º to 932ºF)

62 MAX/62 MAX Users Manual

Fluke AC220 Alligator Clips

Fluke AC220 Alligator Clips are designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.

One pair (red, black) of small, insulated, nickel plated jaws
Blunt tip grabs round screw heads up to 9.5 mm
Recommended for use with TL222 and TL224 test leads
CAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed
One year warranty

Fluke AC220 Declaration of Conformity

Fluke AC280 Hook Clips

Fluke AC280 Hook Clips SureGrip™ accessories are designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.

One pair (red, black) of nickel plated clips
Profile narrows to 5.6mm at tip, hook opening 6.4mm at front, 2mm at base
Recommended for use with TL222 and TL224 test leads
CAT IV 600 V, CAT III 1000 V, 3 A rating. UL listed
One year warranty

Fluke AC280 Declaration of Conformity

Fluke AC283A SureGrip Pincer Clips

Fluke AC283A SureGrip Pincer Clips

Fluke AC283A SureGrip Pincer Clips designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.

One pair (red, black) of nickel plated pincers open to 5 mm
11.4 cm flexible insulated shaft
Recommended for use with TL222 and TL224 test leads
CAT IV 600 V, CAT III 1000 V, 1 A rating. UL listed
One year warranty

Fluke AC220, AC280, AC283 CE Declaration of Conformity

Fluke AC285 SureGrip Alligator Clips

Fluke AC285 SureGrip Alligator Clips are designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.

One pair (red, black) of large alligator clips with nickel-plated steel jaws
Multi-purpose tooth pattern grips anything from fine gauge wire to a 20 mm bolt
Recommended for use with TL222 and TL224 test leads
CAT IV 600 V; CAT III 1000 V, 10 A rating. UL listed
One year warranty

Fluke AC220, AC280, AC283 CE Declaration of Conformity