Eclipse 400-029 RECEPTACLE TESTER – STANDARD OUTLETS

The Eclipse Tools Receptacle Tester for Standard Outlets tests for correct wiring. It can be plugged in to check outlet polarity, and a light pattern is displayed to indicate status. This is a UL approved and RoHS compliant tester.

Correct Wiring
Open Ground? Reverse Polarity
Open Hot? Open Neutral
Hot on Neutral
Hot and Ground Reversed with Open Hot
Works on 120VAC circuits
Light pattern indicates status
UL approved
RoHS compliant

Klein Tools RT110 Receptacle Tester

Klein Tools RT110 Receptacle Tester detects the most common wiring problems in standard receptacles. Conditions indicated: wiring correct, open ground, reverse electrical outlet, open hot, open neutral, hot/ground reversed. Conditions not indicated: quality of ground, multiple hot wires, combinations of defects, reversal of grounded and grounding conductors.

Outlet tester’s light sequence on receptacle tester indicates correct/incorrect wiring
Receptacle tester conforms to UL Std 1436, Certified to CSA Std C22.2 #160
Operating temp: 32-degrees F to 140-degrees F (0-degrees C to 40-degrees C)
Built to withstand a 6.6-foot (2m) drop
Nominal Voltage: 110/125V AC at 50/60Hz in 3-wire outlet
Designed to detect the most common wiring problems in standard receptacles

Klein Tools RT210 GFCI Outlet Tester

Klein Tools Receptacle Testers are designed to detect the most common wiring problems in standard and GFCI receptacles. A convenient chart on the tester helps determine wiring condition in outlet, based on lights results. Conditions indicated: open ground, reverse polarity, open hot, open neutral, hot/ground reversed.

GFCI Tester detects the most common wiring problems in standard and GFCI receptacles
Works on GFCI outlets and confirms operation of the ground fault protective device
Built to withstand a 6.6-foot (2m) drop
Operating temp: 32-Degree to 140-Degree Fahrenheit (0-Degree to 40-Degree Celsius)
Nominal Voltage: 110/125V AC at 50/60Hz in 3-wire outlet

Extech ET10 GFCI Receptacle Tester

Extech ET10 GFCI Receptacle Tester

Tests GFCI circuits and for faulty wiring in 3-wire receptacles.
Color coded lights quickly indicate specific circuit condition.
3 prong plug

Extech TL809 Electronic Test Lead Kit

Extech TL809 Electronic Test Lead Kit

8-piece test lead kit ideal for the testing of digital circuitry

Two 42″ (1m) PVC lead extensions with shrouded banana plugs at both ends.
Two modular 4″ (102mm) Heavy Duty test probe handles with 0.16″ (4mm) banana plug tip, CAT III-1000V rating, UL listed.
Two plunger mini-hooks.
Two alligator clips with removable insulators.
Includes 3-compartment sealable nylon pouch to organize/protect your test leads.

Eclipse MT-7063 POE & LAN CABLE TESTER

PoE Tester

Tests Ethernet network for power over Ethernet existence
Quickly detects the type of the Power Sourcing Equipment
Only for detecting Midspan/Endspan

LAN Cable Tester

Check the RJ11/RJ12/RJ45 pin to pin cable map
Checks for continuity, open, short and crossover wire pairs
Cable mapping up to 984 ft

Klein Tools VDV512-100 Coax Explorer Tester

Klein Tools VDV512-100 Coax Explorer Tester

Free shipping on orders over $100!

New Klein tools VDV512-100 Coax Explorer Tester product features:

Tests and maps coaxial cable with replaceable AAA batteries.
Simple push-button operation for wire tracing on a compact tester that fits in your pocket
Easy to read LED panel indicates PASS, OPEN, or SHORT conditions and simplifies cable identification
Remote #1 (red) is included with this tester; additional remotes also available (Cat. No. VDV512-110)
Color coded push-on remotes allow for up to four cables to be tested and mapped (sold separately)
Upgrade Remote Kit VDV512-110 (sold separately), includes holder with 4 remotes and F adapter
Uses 2 replaceable AAA batteries

Klein Tools VDV Brochure

Eclipse 900-244 BANJO ADAPTOR 4-6-8 PIN

In-line Modular Adapter allows in-line testing for any plug/jack combination. It includes two 4-pair jacks plus a modular cord terminated with 4-pair “universal” plug for accessing any standard 6- or 8-position jack.

Individual conductors are broken out by pin number and correspond to eight separate test pads. Test equipment can be securely attached to the test pads using alligator clips. For quick reference in the field, USOC, T568A, and T568B wiring charts are printed right onto the body.

Jonard Tools PT-300 Pocket Continuity Tester and Toner

Jonard Tools PT-300 Pocket Continuity Tester and Toner

The PT-300 pocket-sized toner is a drop cable continuity tester and cable identifier. Easy to use and runs on a standard AAA battery. Will test up to 5,000 feet. On-off switch in the base of the unit. Toner is turned on when the speaker is unscrewed from the base. Voltage protected to 52VDC. 5″

Designed to help identify cables prior to connecting CATV, Satellite or other transmitting – receiving systems.

Loud tone identifies line carrying signal.
LED light indicates splitters, DC shorts and other self grounding devices in cable.
Convenient on/off switch extends battery life.
Right angle male push-on connector for working in confined areas.
Accurate up to 5,000 feet (1,500 m).
High quality AAA battery for operation (included).
Clear markings on the barrel for use and battery replacement.
Connect the toner without emitting a tone. Now a discretionary option.
Voltage Protected to 52V DC
Just 5″ long, weighs 2 oz. (57 g)

View brochure

Klein Tools NCVT2P Dual Range Non-Contact Voltage Tester 12 – 1000V AC

The NCVT-2P is a non-contact voltage tester that detects 12 to 1000V AC and indicates the presence of voltage in cables, cords, circuit breakers, light fixtures, switches, outlets and wires as well as AC voltage in doorbells, thermostats, low voltage lighting and irrigation systems. Includes both visual and audible signals. The NCVT-2P is rugged enough for any job site.

Non contact voltage tester’s dual-range capabilities allow tester to detect from 12 to 1000 V AC or 70 to 1000V AC for a broad variety of low-voltage or standard voltage applications
Electrical voltage tester detects voltage with simultaneous visual and audible indicators
Non-contact detection of low voltage in security, entertainment, communications, environmental control, and irrigation systems
Green light indicates no voltage
Lightweight, compact tool with pocket clip provides convenient storage and quick access
Auto power-off feature conserves and extends battery life
CAT IV 1000 V rating provides expanded operation and protection
Screw-thread battery cap with O-ring ensures protection against dust and water ingress
6.6-Foot (2 m) drop protection
IP54: Dustproof and waterproof

Klein Tools D203-6C Pliers, Needle Nose Side-Cutters with Spring, 6-Inch

These Long-Nose Side-Cutters are spring-loaded for self-opening. The cutting knives are induction hardened for maximum life. Made of forged steel for durability with a long nose for grabbing and looping wire.

Induction-hardened cutting knives for long life
Knurled jaws for sure wrapping and looping
Spring-loaded action for self-opening
Slim head design for working in confined areas
Hot-riveted joint ensures smooth action and no handle wobble
Curved handles provide greater tool control
Plastic-dipped handles for comfort and ease of identification
Custom, US-made tool steel

Klein Tools NCVT3P Dual Range Non-Contact Voltage Tester with Flashlight, 12 – 1000V AC

Klein Tools NCVT-3 Non Contact Voltage Tester w/flashlight Provides non-contact detection of AC voltage in cables, cords, circuit breakers, light fixtures, switches, outlets and wires as well as AC voltage in doorbells, thermostats, low voltage lighting and irrigation systems.

Voltage Tester provides non-contact detection of low voltage in security, entertainment, communications, environmental control, and irrigation systems
Detects voltage with simultaneous visual and audible voltage indicators
Bright flashlight illuminates work area and may be used independent of voltage detection function
Green light indicates no voltage
Lightweight, compact tool with pocket clip provides convenient storage and quick access
Auto power-off feature conserves and extends battery life
CAT IV 1000V rating provides expanded operation and protection
Screw-thread battery cap with O-ring ensures protection against dust and water ingress
6.6-Foot (2 m) drop protection
IP67: Dustproof and waterproof
Conforms to CE requirements
US Patent 10,073,142, D750,985 and other patents pending

Klein Tools VDV526-100 Network Cable Tester, LAN Explorer Data Cable Tester with Remote

This simple, compact data cable tester for RJ11, RJ12 and RJ45 terminated voice and data cables for Miswires, Open-Faults, Short-Faults and Shield. Instant LED responses indicate cable status. The test remote stores securely in the tester body. The Auto Power-Off feature shuts the tester down automatically to save the 9V battery (included).

Cable tester with single button testing of RJ11, RJ12 and RJ45 terminated voice and data cables
Tests CAT3, CAT5e and CAT6/6A cables
Fast LED responses indicate cable status (Pass, Miswire, Open-Fault, Short-Fault, and Shield)
Test remote stores securely in tester body
Compact tester easily fits in your pocket
Auto Power-off feature to conserve battery life (9V included)
Low battery indicator
Replacement remote (VDV999-150) available (sold separately)

Fluke TL75 Hard Point Test Lead Set

Test leads are an integral part of the complete measurement system and extend the capabilities of your digital multimeter. The Fluke TL75 Hard Point Test Lead Set offers the convenience of a test lead and probe-in-one unit with a variety of connections. One pair (red, black) comfort grip probe with PVC insulated right angel shrouded 4 mm (0.16) banana plugs.

One pair (red, black) comfort grip probes with PVC insulated, test leads with right-angle shrouded banana plugs
Recommended for general purpose measurements
CAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed
One year warranty

Klein Tools 93LDM100C Compact Laser Distance Measure

Klein Tools Compact Laser Distance Measure provides fast and accurate measurements up to 100 feet (30.5 m) with 1/8-Inch (0.3 cm) accuracy and an accuracy of 1/16-Inch (0.2 cm) for the first 30 feet. This compact design fits in a safety vest or shirt pocket to easily carry around a jobsite. The unit automatically saves the last two measurements on the LCD display screen to quickly compare past measurements.

Measures from 2-Inch (5.1 cm) up to 100 feet (30.5 m) with 1/16-Inch (0.16 cm) accuracy for the first 30 feet and accurate to 1/8-Inch (0.32 cm) up to 100 feet (30.5 m)
Laser Distance Measure has lightweight design with pocket clip that makes it easy to carry around a jobsite
Record a single-distance measurement or continuous measurements with a click of a button
Quickly compare the latest measurement with the last 2 measured distances that were automatically saved on the LCD screen
Highly visible reverse contrast LCD display for improved viewing in low light conditions
Toggle between inches, feet and inches, and meters for more precise measurements
Class 2 Laser automatically shuts off after 30 seconds to save battery
Audio alerts when measurement is taken and sound can be disabled
Change the measurement starting point from the top or bottom of the device for more accurate readings
Designed with a lanyard anchor to attach the unit to a tool bag or tool belt; lanyard not included

Fluke 1LAC VoltAlert

The pocket-sized voltage detector

The next generation VoltAlert™ AC non-contact voltage testers from Fluke are easy to use – just touch the tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, you know there’s voltage present. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits in the workplace or at home.

Voltbeat™ technology and continuous self-test – so you always know it’s working
Upon detection, tip glows and beeper sounds
CAT IV 1000 V for added protection
Expanded range: 90 V AC to 1000 V AC
20 V to 90 V AC control circuit model also available
Two-year warranty
Batteries included
On/Off Button
Audible/Silent

1AC II Instruction Sheet

FLIR VP50 Non-Contact Voltage Detector

FLIR VP50 Non-Contact Voltage Detector

The FLIR VP50 is a tough, CAT IV-rated Non-Contact Voltage Detector featuring a combination of alerts – tactile vibration and red LED alarms, a powerful LED flashlight, and versatile voltage sensitivities. We engineered the FLIR VP50 to reliably detect voltages on the latest tamperproof outlets and electrical systems installed using modern construction methods.

Low-profile probe tip gets the sensor closer to electrical sources.
Enhanced sensitivity to help detect voltage in the latest safety outlets.
Detect voltage in electrical systems in large industrial facilities, residential
low voltage installations, and systems located behind obstructions (using
High Sensitivity mode).
Drop tested up to 3 meters.
Multiple LED indicators plus worklight.

876146001689 Fiber Optic Continuity Tester

876146001689 Fiber Optic Continuity Tester

F1-5000U

650nm LED Multimode Fiber Continuity Tester with 2.5mm Universal Adapter for SC, ST, FC

This Fiber Optic Continuity Tester is an excellent tool for fiber identification when multiple fibers are present. Simply connect your ST,FC, or SMA connector to the adapter and push the on/off button. The red LED light is transmitted down the fiber and escapes through the other end. The unit operates on two supplied AA batteries. The durable rubber packaging easily stores in a tool box. The continuity tester is a low cost, high quality unit.

This unit utilizes a red color LED to provide multimode only fiber continuity testing. It is excellent for continuity verification or simple fiber identification in an interconnect location. The flashlight shape and durable hard rubber casing make it very easy to work with.

This unit has a 2.5mm universal adapter which can accept all 2.5mm ferrule connectors such as FC, SC, ST and E2000.

Please note:

This unit can not replace the functions of a laser-based fault locator. Laser Fault Locators utilize a much higher powerful 650nm red laser to find breakage and bad bends in single mode and multimode fibers.

Battery: (2) AA Alkaline

Size 1.75” x 7.0”

Connector Styles 2.5um universal: ST SC FC SMA

(If needed, a hybrid patchcord and mating sleeve will enable efficient hook-ups to other connector styles.)