Hakko T31B-01D52 Chisel Tip

Hakko T31-01D52 Chisel Tip

Hakko T31-01D52,CHISEL,5.2 x 7.8mm,IH,450°C/840°F,FX-1001

T31 Series Composite Tip

This soldering tip is used with the Hakko FX-100 Induction Heat Soldering System.

Use with the Hakko FX1001-51 soldering iron.

Temperature: 840°F (450°C)

Flat-blade screwdriver Shape

Capable of soldering by applying the tip in 2 ways: line and face

Width (size of tip) suitable for the workpiece can be selected

Can be used for any soldering work.

Kiesub offers a wide range of soldering tip variations.

HAKKO proposes guidelines on how to select the most suitable tip size.

Kiesub Electronics is a leading distributor of Hakko soldering equipment. Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.

Weller ETS Long Conical Tip

Weller ETS Long Conical Tip

.015″ x .000″ x 1.00″ Long Conical Tip for PES51 Soldering Pencil

ET series tip for PES51 soldering pencil
Sensor hole in the base of tip is fitted with a stainless steel liner
Prevents the tip from seizing to the sensor

Shape: Long Conical
Style: ETS Tip Size: .015″
Reach/Length: 1 in.
Type: Soldering Tip

Weller Soldering Tips

Hakko T16-1001 Fine Point Chip Solder Tips for FM-2022

Hakko T16-1001 Fine Point Chip Solder Tips for FM-2022

T16-1001
TIP,CHIP

2PK,

0.5mm

FM-2022

Tip type: Chip 0.50 mm
Tip style: Beveled point
Built-in patented heating element
Fast thermal recovery

Hakko T31B-02D24 Chisel Tip

Hakko T31-02D24 Chisel Tip

Hakko T31-02D24, CHISEL, 2.4 x 10mm, IH, 400°C/750°F, FX-1001

T31 Series Composite Tip

This soldering tip is used with the Hakko FX-100 Induction Heat Soldering System.

Use with the Hakko FX1001-51 soldering iron.

Temperature: 750°F (400°C)

This type has a shape like a flat-blade screwdriver and is capable of soldering by applying the tip in 2 ways: line and face.

The width (size of tip) suitable for the workpiece can be selected, and it can be used for any soldering work.

How to use the Shape D and examples

Kiesub offers a wide range of soldering tip variations.

HAKKO proposes guidelines on how to select the most suitable tip size.

Hakko T31B-01D16 Chisel Tip

Hakko T31-01D16 Chisel Tip

TIP,CHISEL,1.6 x 10mm,IH,450°C/840°F,FX-1001

T31 Series Composite Tip

This soldering tip is used with the Hakko FX-100 Induction Heat Soldering System.

Temperature: 840°F (450°C)

This type has a shape like a flat-blade screwdriver and is capable of soldering by applying the tip in 2 ways: line and face.

The width (size of tip) suitable for the workpiece can be selected, and it can be used for any soldering work.

How to use the Shape D and examples

Kiesub offers a wide range of soldering tip variations.

HAKKO proposes guidelines on how to select the most suitable tip size.

Hakko T31B-01D08 Chisel Tip

Hakko T31-01D08 Chisel Tip

TIP,CHISEL,0.8 x 9mm,IH,450°C/840°F,FX-1001

T31 Series Composite Tip

This soldering tip is used with the Hakko FX-100 Induction Heat Soldering System.

Use with the Hakko FX1001-51 soldering iron.

Temperature: 840°F (450°C)

This type has a shape like a flat-blade screwdriver and is capable of soldering by applying the tip in 2 ways: line and face.

The width (size of tip) suitable for the workpiece can be selected, and it can be used for any soldering work.

How to use the Shape D and examples

Kiesub offers a wide range of soldering tip variations.

HAKKO proposes guidelines on how to select the most suitable tip size.

Hakko T31-01BL Conical Tip

Hakko T31-01BL Conical Tip

TIP,CONICAL,R0.2 x 12mm, IH,450°C/840°F,FX-1001

T31 Series Composite Tip

This soldering tip is used with the Hakko FX-100 Induction Heat Soldering System.

Use with the Hakko FX1001-51 soldering iron.

Temperature: 840°F (450°C)

This shape is All-round type which can be used from any direction and it is available for any works. Therefore it is not only accessible for the soldering beginners but also suitable for the experienced.

Shape B has the special application of Heavy Duty Type.

Shape B has the special application of Long Life Type.

Possible to solder any surface from small to large.

How to use the Shape B and examples

Hakko T31-01BC28 Bevel Tip

Hakko T31-01BC28 Bevel Tip

TIP,BEVEL,2.8mm/60° x 17.6mm,IH,450°C/840°F,FX-1001

T31 Series Composite Tip

This soldering tip is used with the Hakko FX-100 Induction Heat Soldering System.

Use with the Hakko FX1001-51 soldering iron.

Temperature: 840°F (450°C)

This type has a shape like a cone or column cut at a slant, which allows users to select the cut surface size depending on the workpiece.

It is used for drag soldering and pre-tinning of lead wires.

How to use the Shape BC/C and examples

Difference between BC/C and BCF/CF tip shape

Hakko T31-01BC1 Bevel Tip

Hakko T31-01BC1 Bevel Tip

TIP,BEVEL,1mm/60° x 14.2mm,IH,450°C/840°F,FX-1001

T31 Series Composite Tip

This tip is used with the Hakko FX-100 Induction Heat Soldering System.

Use with the Hakko FX1001-51 soldering iron.

Temperature: 840°F (450°C)

This type has a shape like a cone or column cut at a slant, which allows users to select the cut surface size depending on the workpiece.

It is used for drag soldering and pre-tinning of lead wires.

How to use the Shape BC/C and examples

Difference between BC/C and BCF/CF tip shape

Kiesub offers a wide range of soldering tip variations.

HAKKO proposes guidelines on how to select the most suitable tip size.

Hakko T15-R20 Slot Tip

Hakko T15-R20 Slot Tip

TIP,SLOT,2 x 1.3mm,CHIP0402,0603,FM-2027

This tip is used with the following Hakko Soldering Stations and Systems:

Hakko FM-206 3-Port Soldering Station (FM2027 Handpiece)
Hakko FM-204 Soldering Station
Hakko FM-203 Soldering Station
Hakko FX-951 Soldering Station
Hakko FM-202 Soldering System
Hakko FP-102 Soldering Station
Hakko FP-101 Soldering Station

Tip Shape: Slot

This type has a groove at the tip end.

It is suitable for removing ICs.

How to use the Shape R and examples

HAKKO proposes guidelines on how to select the most suitable tip size.

Hakko T15-R34 Slot Tip

Hakko T15-R34 Slot Tip:

TIP,SLOT,3.4 x 1.8mm,CHIP1206,1210,FM-2021,FM-2027

This tip is used with the following Hakko Soldering Stations and Systems:

Hakko FM-206 3-Port Soldering Station (FM2027 Handpiece)
Hakko FM-204 Soldering Station
Hakko FM-203 Soldering Station
Hakko FX-951 Soldering Station
Hakko FM-202 Soldering System
Hakko FP-102 Soldering Station
Hakko FP-101 Soldering Station

Tip Shape: Slot

This type has a groove at the tip end.

It is suitable for removing ICs.

How to use the Shape R and examples

HAKKO proposes guidelines on how to select the most suitable tip size.

Hakko T15-BC28 Solder Tip

Hakko T15-BC28 Solder Tip:

T15-BC28
TIP,BEVEL,2.8mm/60° x 17.6mm,FM-2027

T15 Series Composite Tip

This solder tip is used with the following Hakko Soldering Stations and Systems:

Hakko FM-206 3-Port Soldering Station (FM2027 Handpiece)
Hakko FM-204 Soldering Station
Hakko FM-203 Soldering Station
Hakko FX-951 Soldering Station
Hakko FM-202 Soldering System
Hakko FP-102 Soldering Station
Hakko FP-101 Soldering Station

Tip Shape: Bevel

This type has a shape like a cone or column cut at a slant, which allows users to select the cut surface size depending on the workpiece.

It is used for drag soldering and pre-tinning of lead wires.

How to use the Shape BC/C and examples

Difference between BC/C and BCF/CF tip shape

HAKKO proposes guidelines on how to select the most suitable tip size.

Hakko T15-JS02 Solder Tip

Hakko T15-JS02 Solder Tip

T15-JS02
TIP,BENT,R0.2mm/30° x 1.6mm x 7.9mm,FM-2027

T15 Series Composite Tip

This tip is used with the following Hakko Soldering Stations and Systems:

Hakko FM-206 3-Port Soldering Station (FM2027 Handpiece)
Hakko FM-204 Soldering Station
Hakko FM-203 Soldering Station
Hakko FX-951 Soldering Station
Hakko FM-202 Soldering System
Hakko FP-102 Soldering Station
Hakko FP-101 Soldering Station

Tip Shape: Bent

This type differs from Shape B and I by bending the tip end and is capable of soldering by applying the tip in 2 ways: face and point.

It is used for drag soldering and correction of bridging.

How to use the Shape J and examples

HAKKO proposes guidelines on how to select the most suitable tip size.

Hakko T15-R23 Slot Tip

Hakko T15-R23 Slot Tip:

TIP,SLOT,2.3 x 1.5mm,CHIP0805,FM-2027

This tip is used with the following Hakko Soldering Stations and Systems:

Hakko FM-206 3-Port Soldering Station (FM2027 Handpiece)
Hakko FM-204 Soldering Station
Hakko FM-203 Soldering Station
Hakko FX-951 Soldering Station
Hakko FM-202 Soldering System
Hakko FP-102 Soldering Station
Hakko FP-101 Soldering Station

Tip Shape: Slot

This type has a groove at the tip end.

It is suitable for removing ICs.

How to use the Shape R and examples

HAKKO proposes guidelines on how to select the most suitable tip size.

Hakko T15-1001 Tunnel Tip

Hakko T15-1001 Tunnel Tip

TIP,TUNNEL,4.6 x 5.1mm,SOIC-8,FM-2021,FM-2027

This tip is used with the following Hakko Soldering Stations and Systems:

Hakko FM-206 3-Port Soldering Station (FM2027 Handpiece)
Hakko FM-204 Soldering Station
Hakko FM-203 Soldering Station
Hakko FX-951 Soldering Station
Hakko FM-202 Soldering System
Hakko FP-102 Soldering Station
Hakko FP-101 Soldering Station

Tip Shape: Tunnel

This type is capable of heating plural pins or lead wires at once and is used for rework of SMDs.

It is used for removal of SOP.

How to use the SMD Type : Shape Tunnel and examples

HAKKO proposes guidelines on how to select the most suitable tip size.

Hakko T15-1002 Tunnel Tip

Hakko T15-1002 Tunnel Tip:

TIP,TUNNEL,10.4 x 5.1mm, SOIC-14/16,FM-2021,FM-2027

This tip is used with the following Hakko Soldering Stations and Systems:

Hakko FM-206 3-Port Soldering Station (FM2027 Handpiece)
Hakko FM-204 Soldering Station
Hakko FM-203 Soldering Station
Hakko FX-951 Soldering Station
Hakko FM-202 Soldering System
Hakko FP-102 Soldering Station
Hakko FP-101 Soldering Station

Tip Shape: Tunnel

This type is capable of heating plural pins or lead wires at once and is used for rework of SMDs.

It is used for removal of SOP.

How to use the SMD Type : Shape Tunnel and examples

HAKKO proposes guidelines on how to select the most suitable tip size.

Weller ST1 Screwdriver Tip

Weller ST1 Screwdriver Tip:

Weller ST1 .063″ x 0.750″ ST Series Screwdriver Tip for WP25, WP30, WP35, WLC100

Tips are solid copper plated with iron all over, and nickel and chromium behind the working surface
Designed to provide maximum heat transfer from the heater to the tip
Screwdriver tip
Tip Size: 0.062″ (1.58 mm)
Reach: 0.75″ (19.05 mm)

By using genuine Weller parts, you are automatically assured to be operating with the latest and greatest technology in the
soldering industry. The Weller R&D Team is constantly testing and developing new techniques to manufacture the ultimate
solder tip.

Weller Soldering Tips

Weller PSI5 .031 Double Flat Tip

Weller PSI5 .031 Double Flat Tip:

Weller PSI5 .031″ Double Flat Tip for PSI100 Portasol® Butane Soldering Iron

Fits Tool(s): PSI100
Tip Style: Single Flat
Tip Width: O/D .031 in./.79 mm
Reach: .68 in./17.27 mm
Temperature Range: 850° F