Hakko A1476 BGA Nozzle 36 x 36 x 15mm

Hakko A1476 BGA Nozzle 36 x 36 x 15mm

Rectangular Nozzle type.
Works best with Ball Grid Array mounts.
1.42″ x 1.42″ (36 x 36 x 15mm)
For the Hakko 852 SMD Rework System.

Hakko A1476 BGA Nozzle compatible with the Hakko 852 SMD Hot Air Rework Station.

Kiesub Electronics is a leading distributor of Hakko soldering equipment. Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.

Hakko A1477 BGA Nozzle 39 x 39 x 15mm

Rectangular Nozzle type.
Works best with Ball Grid Array mounts.
1.54″ x 1.54″ (39 x 39 x 15mm)
For the Hakko 852 SMD Rework System.

Hakko A1477 BGA Nozzle compatible with the Hakko 852 SMD Hot Air Rework Station.

Hakko A1478 BGA Nozzle 41 x 41 x 15mm

Hakko A1478 BGA Nozzle 41 x 41 x 15mm

Rectangular Nozzle type.
Works best with Ball Grid Array mounts.
1.61″ x 1.61″ (41 x 41 x 15mm)
For the Hakko 852 SMD Rework System.

Hakko A1478 BGA Nozzle compatible with the Hakko 852 SMD Hot Air Rework Station.

Hakko A1585 Pre Filter

10 pack of pre filters for the FA-430,HJ3100 Note: Please note that the filters we use in our fume extraction systems are designed for removing particulate and byproducts from the soldering process ONLY. The filter media is not designed to be used as any type of respiratory mask or component, and the main filter of the FA-430 is not designed to filter viruses from the air.

Hakko A1611 Replacement Filter

Hakko A5044 Filter (10 pack)

Pack of 10.

Hakko B1086 Cleaning Pin 0.8mm

Cleaning pin for Hakko desoldering nozzles with 0.8mm diameter

Hakko B1087 Cleaning Pin 1.0mm

Cleaning pin for Hakko desoldering nozzles with 1.0mm diameter

Hakko B1088 Cleaning Pin 1.3mm

Hakko C1390C Omnivise PCB Holder

Hakko C1390C Omnivise PCB Holder

The Hakko C1390C Omnivise was designed to hold printed circuit boards level while reworking them, but it can adapt easily to anything in the horizontal plane.

• adjustable height from bottom base to top of riser: 2.8, 3.1, 3.3, 3.6, 3.8 in. increments (72.5, 78.0, 84.5, 91.0, 97.5 mm)

• adjustable opening from 0 to 0.8 in (0 to 20mm)

• padded jaws to protect from damage to delicate surfaces

• ESD safe

Hakko C1391B Nozzle Tray

Hakko C1391B Nozzle Tray

The Hakko C1391B Nozzle Tray offers convenient storage for nozzles. Removal and installations slots make changing nozzles safe, fast, and easy.

Designed to work with Hakko hot air stations: 850, 852, and 702.

Hakko C1392B Rework Fixture

Hakko C1390C Omnivise PCB Holder

The Hakko C1392B Rework Fixture is designed for use with the Hakko 850 or Hakko 852 Hot Air Rework System, either alone or together with the Hakko 853 Pre-Heater and Hakko C1390 Omnivise Board Holders.

The new design features a smoother lever-action stroke with an adjustable stop to help prevent unnecessary pressure being applied to the board and nozzle, an adjustable vertical height for greater flexibility, and a more secure holder for the 850/852 handpieces.

The Operating lever can be fixed to either the left or right side of the fixture to accommodate the operator.

The C1392B Rework Fixture requires some assembly.

Hakko FG100B-03 Tip Thermometer

HAKKO FG100B-03 Thermometer

The HAKKO FG-100 thermometer provide fast, accurate tip temperature measurements using a fine CA wire sensor (ø0.2). The FG-100 measures tip temperatures as well as solder pot temperatures (with optional temperature probe)

Lightweight, easy-to-replace sensors provide accurate measurement of tips for verification or calibration processes. When the MAX HOLD feature is enabled, the thermometer will display the maximum temperature measured.

Features:

The sensor (P/N: 191-212) has a special metal alloy coating that resists corrosion and oxidation. Note: the 191-212 sensor can measure temperatures up to 500°C (932°F). For higher temperatures, please use the applicable temperature probe (see Accessories: P/N A1310.)
Sensor replacement is quick and easy
Easy-to-read digital temperature display

Hakko FM-2022 Parallel Remover

Hakko FM-2022 Parallel Remover

Hot tweezers that enable easy removal of SMD chips and flat packages of up to 25mm in width.
Composite-type design with a built-in heater facilitates the replacement of soldering tips.
Used together with HAKKO FM-203 or HAKKO FM-206

Hakko FM-2023 SMD Mini Hot Tweezer

Hakko FM-2023 SMD Mini Hot Tweezer

Hakko FM-2023 SMD Mini Hot Tweezer with tips and stand.

The Hakko FM-2023 designed for use with small chip components as small as 0201. The Mini Parallel Remover has a unique feature allowing it to work as a standard or reverse action tweezer. A simple flip of a switch sets the action of the tool.

The FM-2023 must be used in conjunction with a FM-203 or FM-202 soldering station. The holder clip (PN: B2848) attaches to a 634 iron holder (634-01, 634-02, 634-03.) The Hakko FM-2023 SMD Mini Parallel Remover removes chips as small as 0201. Note: Tips/Tweezers are NOT included.

Hakko FM-2026 N2 gas Soldering Iron

Hakko FM-2026 N₂ gas Soldering Iron

Hakko FM-2026 N₂ gas Soldering Iron.

(can be used with the Hakko FP-102, FM-202, FX-951 and FM-203 stations)
supplies hot nitrogen (N2) gas to the soldering area
the nitrogen gas is preheated as it passes along the ceramic heater in the FM-2026 handpiece
soldering efficiency can be improved as the hot nitrogen creates a preheating effect while reducing the amount of oxygen in the solder connection area (less oxidation)
Uses T15 tips (not included)

Hakko FM-203-01 Dual Port Variable Temp Soldering Station

FREE UPS GROUND SHIPPING

The FM-203-01 offers two soldering ports for a variety of soldering tools that can be used in a variety of combinations, including soldering irons, SMD hot tweezers and/or desoldering tools.

Note: Desoldering tool requires the Hakko FM-2024 desoldering module.

The FM-203-01 features:

• process control so you can select any temperature you want without changing the tip – one tip, any temperature!

• temperature range 200 – 450°C (400 – 840°F)

• temperature accuracy ±15°C

• LED in handpiece tells the operator the iron is hot

• auto shutoff

• sleep mode functionality

• No Calibration Necessary

Note: Tips are NOT included.

Hakko FM-204 Desoldering & Soldering Station

Hakko FM-204 Desoldering & Soldering Station

FREE UPS GROUND SHIPPING

The Hakko FM-204 Desoldering & Soldering Station is a “Self-Contained” Desoldering Station/Rework Tool with all the Soldering Functionality of the FM-203 in a Single-Port Station.

The FM-204 ships with one (1) FM2024-02 desoldering tool.
Built in vacuum pump
Temperature range 200 – 450°C (400 – 840°F)
Temperature accuracy ±15°C
Quick-change composite nozzles (N3 series)
Gun or Pencil-style desoldering handpiece
Sleep mode functionality
Excellent thermal recovery
The integrated nozzle containing both heating element and sensor provides higher thermal recovery than conventional tips.

fm204

Nozzles are NOT included

Order N3 nozzles here

Note: The FM-204 and FM204-CP (Conversion Port) are “SINGLE PORT” stations, meaning, ONLY ONE HANDPIECE can be used at a time. (You cannot use the soldering handpiece and desoldering handpiece at the same time.)