Hakko T31-02KU Knife Tip

Hakko T31-02KU KNIFE, 4.8mm/45° x 15mm, IH, 400°C/750°F, FX-1001

T31 Series Composite Tip

This soldering tip is used with the Hakko FX-100 Induction Heat Soldering System.

Use with the Hakko FX1001-51 soldering iron.

Temperature: 750°F (400°C)

Shaped like a knife

Capable of soldering by applying the tip in 3 ways: line, face and point

used for soldering at narrow pitches, correction of bridging and drag soldering

Kiesub offers a wide range of soldering tip variations.

HAKKO proposes guidelines on how to select the most suitable tip size.

Kiesub Electronics is a leading distributor of Hakko soldering equipment. Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.

Hakko T31-02SBL Conical Tip

Hakko T31-02SBL, CONICAL, R0.2×13.7mm, IH, 400°C/750°F, FX-1001

T31 Series Composite Tip

This soldering tip is used with the Hakko FX-100 Induction Heat Soldering System.

Use with the Hakko FX1001-51 soldering iron.

Temperature: 750°F (400°C)

Cone or column Shape cut at a slant.

Allows users to select the cut surface size depending on the workpiece.

Used for drag soldering and pre-tinning of lead wires.

Kiesub offers a wide range of soldering tip variations.

HAKKO proposes guidelines on how to select the most suitable tip size.

Hakko T31-02WD08 Chisel Tip

Hakko T31-02WD08, CHISEL, 0.8 x 6mm, IH, 400°C/750°F, FX-1001

T31 Series Composite Tip

This soldering tip is used with the Hakko FX-100 Induction Heat Soldering System.

Use with the Hakko FX1001-51 soldering iron.

Temperature: 750°F (400°C)

Flat-blade screwdriver Shape.

Capable of soldering by applying the tip in 2 ways: line and face.

Width (size of tip) suitable for the workpiece can be selected.

Can be used for any soldering work.

Kiesub offers a wide range of soldering tip variations.

HAKKO proposes guidelines on how to select the most suitable tip size.

Hakko T31B-01D08 Chisel Tip

Hakko T31-01D08 Chisel Tip

TIP,CHISEL,0.8 x 9mm,IH,450°C/840°F,FX-1001

T31 Series Composite Tip

This soldering tip is used with the Hakko FX-100 Induction Heat Soldering System.

Use with the Hakko FX1001-51 soldering iron.

Temperature: 840°F (450°C)

This type has a shape like a flat-blade screwdriver and is capable of soldering by applying the tip in 2 ways: line and face.

The width (size of tip) suitable for the workpiece can be selected, and it can be used for any soldering work.

How to use the Shape D and examples

Kiesub offers a wide range of soldering tip variations.

HAKKO proposes guidelines on how to select the most suitable tip size.

Hakko T31B-01D16 Chisel Tip

Hakko T31-01D16 Chisel Tip

TIP,CHISEL,1.6 x 10mm,IH,450°C/840°F,FX-1001

T31 Series Composite Tip

This soldering tip is used with the Hakko FX-100 Induction Heat Soldering System.

Temperature: 840°F (450°C)

This type has a shape like a flat-blade screwdriver and is capable of soldering by applying the tip in 2 ways: line and face.

The width (size of tip) suitable for the workpiece can be selected, and it can be used for any soldering work.

How to use the Shape D and examples

Kiesub offers a wide range of soldering tip variations.

HAKKO proposes guidelines on how to select the most suitable tip size.

Hakko T31B-01D52 Chisel Tip

Hakko T31-01D52 Chisel Tip

Hakko T31-01D52,CHISEL,5.2 x 7.8mm,IH,450°C/840°F,FX-1001

T31 Series Composite Tip

This soldering tip is used with the Hakko FX-100 Induction Heat Soldering System.

Use with the Hakko FX1001-51 soldering iron.

Temperature: 840°F (450°C)

Flat-blade screwdriver Shape

Capable of soldering by applying the tip in 2 ways: line and face

Width (size of tip) suitable for the workpiece can be selected

Can be used for any soldering work.

Kiesub offers a wide range of soldering tip variations.

HAKKO proposes guidelines on how to select the most suitable tip size.

Hakko T31B-01IL Conical Tip

Hakko T31-01IL Conical Tip

Hakko T31-01IL, CONICAL, R0.2×14.7mm, IH, 450°C/840°F, FX-1001

T31 Series Composite Tip

This soldering tip is used with the Hakko FX-100 Induction Heat Soldering System.

Use with the Hakko FX1001-51 soldering iron.

Temperature: 840°F (450°C)

Thin conical end

Ultrafine tip which is best suited for soldering at narrow pitches, etc

Ideal for soldering micro components such as 0603, etc. and for repairing high-density-mounting P.W.Bs. such as in cellular phones, etc

Kiesub offers a wide range of soldering tip variations.

HAKKO proposes guidelines on how to select the most suitable tip size.

Hakko T31B-01JL02 Bent Tip

Hakko T31-01JL02 Bent Tip

Hakko T31-01JL02, BENT, R0.2mm/30° x 7.2mm x 8mm, IH,450°C/840°F, FX-1001

T31 Series Composite Tip

This soldering tip is used with the Hakko FX-100 Induction Heat Soldering System.

Use with the Hakko FX1001-51 soldering iron.

Temperature: 840°F (450°C)

Bent tip end

Capable of soldering by applying the tip in 2 ways: face and point

Ideal for drag soldering and correction of bridging

Kiesub offers a wide range of soldering tip variations.

HAKKO proposes guidelines on how to select the most suitable tip size.

Hakko T31B-01JS02 Bent Tip

Hakko T31-01JS02 Bent Tip

Hakko T31-01JS02, BENT, R0.2mm/30° x 1.8mm x6.6mm, IH, 450°C/840°F, FX-1001

T31 Series Composite Tip

This soldering tip is used with the Hakko FX-100 Induction Heat Soldering System.

Use with the Hakko FX1001-51 soldering iron.

Temperature: 840°F (450°C)

Bent tip end

Capable of soldering by applying the tip in 2 ways: face and point

Ideal for drag soldering and correction of bridging

Kiesub offers a wide range of soldering tip variations.

HAKKO proposes guidelines on how to select the most suitable tip size.

Hakko T31B-02D08 Chisel Tip

Hakko T31-02D08 Chisel Tip

Hakko T31-02D08, CHISEL, 0.8x9mm, IH, 400°C/750°F, FX-1001

T31 Series Composite Tip

This soldering tip is used with the Hakko FX-100 Induction Heat Soldering System.

Use with the Hakko FX1001-51 soldering iron.

Temperature: 750°F (400°C)

This type has a shape like a flat-blade screwdriver and is capable of soldering by applying the tip in 2 ways: line and face.

The width (size of tip) suitable for the workpiece can be selected, and it can be used for any soldering work.

How to use the Shape D and examples

Kiesub offers a wide range of soldering tip variations.

HAKKO proposes guidelines on how to select the most suitable tip size.

Hakko T31B-02D16 Chisel Tip

Hakko T31-02D16 Chisel Tip

Hakko T31-02D16 ,CHISEL, 1.6 x 10mm, IH, 400°C/750°F, FX-1001

T31 Series Composite Tip

This soldering tip is used with the Hakko FX-100 Induction Heat Soldering System.

Temperature: 750°F (400°C)

This type has a shape like a flat-blade screwdriver and is capable of soldering by applying the tip in 2 ways: line and face.

The width (size of tip) suitable for the workpiece can be selected, and it can be used for any soldering work.

How to use the Shape D and examples

Kiesub offers a wide range of soldering tip variations.

HAKKO proposes guidelines on how to select the most suitable tip size.

Hakko T31B-02D24 Chisel Tip

Hakko T31-02D24 Chisel Tip

Hakko T31-02D24, CHISEL, 2.4 x 10mm, IH, 400°C/750°F, FX-1001

T31 Series Composite Tip

This soldering tip is used with the Hakko FX-100 Induction Heat Soldering System.

Use with the Hakko FX1001-51 soldering iron.

Temperature: 750°F (400°C)

This type has a shape like a flat-blade screwdriver and is capable of soldering by applying the tip in 2 ways: line and face.

The width (size of tip) suitable for the workpiece can be selected, and it can be used for any soldering work.

How to use the Shape D and examples

Kiesub offers a wide range of soldering tip variations.

HAKKO proposes guidelines on how to select the most suitable tip size.

Hakko T31B-02D52 Chisel Tip

Hakko T31-02D52 Chisel Tip

Hakko T31-02D52, CHISEL, 5.2 x 7.8mm, IH, 400°C/750°F, FX-1001

T31 Series Composite Tip

This soldering tip is used with the Hakko FX-100 Induction Heat Soldering System.

Use with the Hakko FX1001-51 soldering iron.

Temperature: 750°F (400°C)

Flat-blade screwdriver Shape

Capable of soldering by applying the tip in 2 ways: line and face

Width (size of tip) suitable for the workpiece can be selected

Can be used for any soldering work.

Kiesub offers a wide range of soldering tip variations.

HAKKO proposes guidelines on how to select the most suitable tip size.

Hakko T31B-02IL Conical Tip

Hakko T31-02IL Conical Tip

Hakko T31-02IL, CONICAL, R0.2×14.7mm, IH, 400°C/750°F, FX-1001

T31 Series Composite Tip

This soldering tip is used with the Hakko FX-100 Induction Heat Soldering System.

Use with the Hakko FX1001-51 soldering iron.

Temperature: 750°F (400°C)

Thin conical end

Ultrafine tip which is best suited for soldering at narrow pitches, etc

Ideal for soldering micro components such as 0603, etc. and for repairing high-density-mounting P.W.Bs. such as in cellular phones, etc

Kiesub offers a wide range of soldering tip variations.

HAKKO proposes guidelines on how to select the most suitable tip size.

Hakko T31B-02JL02 Bent Tip

Hakko T31-02JL02 Bent Tip

Hakko T31-02JL02, BENT, R0.2mm/30° x 7.2mm x 8mm, IH, 400°C/750°F, FX-1001

T31 Series Composite Tip

This soldering tip is used with the Hakko FX-100 Induction Heat Soldering System.

Use with the Hakko FX1001-51 soldering iron.

Temperature: 750°F (400°C)

Bent tip end

Capable of soldering by applying the tip in 2 ways: face and point

Ideal for drag soldering and correction of bridging

Kiesub offers a wide range of soldering tip variations.

HAKKO proposes guidelines on how to select the most suitable tip size.

Hakko T31B-02JS02 Bent Tip

Hakko T31-02JS02 Bent Tip

Hakko T31-02JS02, BENT, R0.2mm/30° x 1.8mm x6.6mm, IH, 400°C/750°F, FX-1001

T31 Series Composite Tip

This soldering tip is used with the Hakko FX-100 Induction Heat Soldering System.

Use with the Hakko FX1001-51 soldering iron.

Temperature: 750°F (400°C)

Bent tip end

Capable of soldering by applying the tip in 2 ways: face and point

Ideal for drag soldering and correction of bridging

Kiesub offers a wide range of soldering tip variations.

HAKKO proposes guidelines on how to select the most suitable tip size.

Jonard Tools DP-200 High Vacuum Desoldering Pump

Jonard Tools DP-200 High Vacuum Desoldering Pump

A specially engineered high vacuum desolder pump made to exacting specifications, ESD safe and providing precise repeatable operation.

This ESD Safe desoldering pump is fitted with a Teflon Tip and is 13″ long including tip. Durable corrosion resistant plastic construction. Precision metal plunger. Corrosion treated springs. Insulated vacuum pulse. Regulated return (1 millisecond ±30%). Uniform reset pressure (11in. lbs. ±20%). Cushioned shock reduction (pulse release to minimize board damage).

FEATURES:

ESD Safe
Teflon Tip
Durable corrosion resistant plastic construction
Precision metal plunger
Corrosion treated springs
Insulated vacuum pulse
Regulated return (1 millisecond ±30%)
Uniform reset pressure (11in. lbs. ±20%)
Cushioned shock reduction (pulse release to minimize board damage)

Jonard Tools DPT-200 Antistatic Desolder Pump Tip For DP-200

Desoldering Pump Replacement Tip for DP-200